Escolar Documentos
Profissional Documentos
Cultura Documentos
1. Separate the AC adaptor and the battery certainly before disjoint system. 2. Push out the battery on like figure 2 after have pushed latches with figure 1 to both side. 1 1
Main System
4. Remove Tapes.
5. Remove DMB module Screw (2EA) and Antenna Screw (1EA) 6. Remove DMB module and Antenna Sub Board. Caution No DMB model : go next stage
Main System
9. Disconnect Fan Connector, Speaker Connector(2), Left Sub Board FPC, LCD FPC, Mic Connetor. 10. Remove Fan Screw (2EA). 11. Remove Main Board Screw (7EA).
12. Remove Fan. 13. Disconnect Right Sub Board FFC. 14. Lift up Main Board and Disconnect Inverter Cable. 15. Remove MainBoard.
16. Disconnect LCD Power Connector. 17. Remove Invertor Board Screw (2EA) and Remove Invertor Board.
Main System
19. Disconnect connectors. (Check Next stage Description.)
19-1. Disconnect Right Sub Board FFC & TSP FPC. 19-2. Remove Right Sub Board Screw (1EA) and Lift Right Sub Board. Assembly Caution TSP FPC must be over LCD Bracket
19-3. Disconnect Left Sub Board FPC. 16-4. Disconnect LED FPC. 16-5. Remove Left Sub Board Screw (1EA) and Bluetooth Screw (1EA) Lift Left Sub Board and Bluetooth Module.
Main System
21. Detatch Tape, and Open latch. Disjoint LCD FPC.
Main System
25. Lift User Define button. Assembly Caution User define button assemble like picture.
26. Lift Left Sub Board and Lift 4Way-Slide Button. Assembly Caution Inner Slide button part attach to Sub board. Check Indicator direct down like picture.
Main System