Escolar Documentos
Profissional Documentos
Cultura Documentos
(Rev 2 01/12/2009) This document outlines the steps necessary to install Cisco VPN 5.0.03.0530 client and the RSA Soft Token. Instructions are included for importing the soft token and creating a new PIN. Directions for using the RSA soft token and connecting to AMD.com using the Cisco VPN client are also covered. Included in this document are the following instructions: Steps: How to download and install the AMD Cisco VPN Client / RSA Soft Token Instructions to Manually Remove the ATInet or Cisco VPN Client A. From Windows XP B. From Windows Vista Instructions for importing the Soft Token File How to create your PIN for the SecurID Soft Token How to connect to the AMD network using the VPN Client Installation package information: Name: amd-cvpn-5.0.4-sms-Ver-23.d.zip Typical total installation time: 20 25 minutes Size: 20.8mb Location:
http://amdcentral.amd.com/AMDTeams/Corporate/myIT/RemoteAccess/Pages/VPNQuickStartGuide.aspx
Page 2 7
11 13 18
Detect a previous VPN installation and remove it if not current Prompts that a restart is necessary to complete VPN removal Upon restart begins installation of Cisco VPN 5.0.03.0530 Prompts if you desire to install the RSA Soft Token software Installs RSA Soft Token Software if accepted
If you require further assistance please contact the IT Service desk at x43866.
http://amdcentral.amd.com/AMDTeams/Corporate/myIT/RemoteAccess/Pages/ VPNQuickStartGuide.aspx
3. Select a location to Save the folder. Typically the default location is acceptable.
6. Verify Show extracted files when complete is checked then click Extract
9. The Installation will check your system for previous versions of VPN software.
Click OK
At this time it will attempt to automatically remove the prior ATI or Cisco VPN installation. Typical time to remove an older installation is 5 7 minutes. Please refer to section 2 Instructions to Manually Remove the ATInet or Cisco VPN Client if the automated uninstall function fails.
12. You will receive a prompt the system will restart. Select Close and your system
will restart after a short delay.
13. Upon restart and login your system will automatically begin the installation of
Cisco VPN client. This installation typically takes between 10 15 minutes. Please be patient during this process as your system may appear to be unresponsive. Upon successful VPN installation a RSA Soft-Token install prompt will appear. If you are using a Soft Token click Install. If you currently posses a hard token and are not switching to a Soft Token click Cancel.
14. Click OK
Software installation is now complete! If you are using a RSA soft token please refer to section 3 Instructions for importing the Soft Token File. If you need directions for using the VPN client please refer to section 5 How to connect to the AMD network using the VPN Client.
2A Manually Removing the ATInet / Cisco VPN Client from Windows XP Assumptions: The scripted automatic uninstall of ATI or previous Cisco VPN installation failed. You presently have ATInet or an older version of Cisco VPN Client installed. Your operating system is XP. Note: Disconnect from and close the ATInet VPN client. Ensure all other applications are closed before removing the ATInet VPN client.
2. Select ATInet Client or Cisco Systems VPN Client then click the
Change/Remove button.
Or
Important: Once ATInet or the previous Cisco Client has successfully uninstalled restart your computer to ensure all components are removed. Do not begin the installation of the new VPN Client until your system has been restarted.
2. Select ATInet Client or Cisco Systems VPN Client from the currently installed
program list then click the Uninstall/Change button.
Or
Important: Once ATInet or the previous Cisco Client has successfully uninstalled restart your computer to ensure all components are removed. Do not begin the installation of the new VPN Client until your system has been restarted.
1. In Outlook open the email containing the attached .sdtid file and password 2. Double click on the (username).sdtid attachment
3. Click Open
4. Type in the unlock password contained in the e-mail with the attached .sdtid file
the click OK
5. The .sdtid file will attempt to import into the RSA software at this time. Upon
Completion click OK
Congratulations you have successfully imported your sdtid file into the RSA Software!
2. Open RSA SecurID by clicking on Start / Programs / RSA SecurID Token / RSA
SecurID Token. Click on the Right Arrow to generate a Tokencode. A Tokencode allows you to generate a new PIN within the Cisco VPN Client.
3. The blue bars under the token give an estimate on when the numeric key will
refresh. As a best practice when signing on please verify you have three or more bars left.
4. Type in your Window NT username and the Tokencode on the RSA softtoken.
Click Sign In
6. A confirmation page should appear noting your PIN was successfully saved.
Congratulations you have successfully saved the PIN! Method 2 Create a PIN through Cisco VPN
1. Open RSA SecurID by clicking on Start / Programs / RSA SecurID Token / RSA
SecurID Token. Click on the Right Arrow to generate a Tokencode. A Tokencode allows you to generate a new PIN within the Cisco VPN Client.
2. The blue bars under the token give an estimate on when the token will refresh.
As a best practice when signing on please verify you have three or more bars left.
3. Open Cisco VPN Client. Click on Start / Programs / Cisco Systems VPN Client
/ VPN Client. Highlight the location nearest you and click Connect
5. In the Username field Type in your Windows NT login. Right click in the VPN
Client password field and select Paste or Ctrl-V then push OK. This copies the 8 digit numeric Tokencode key into the password field. If desired you can manually type in the displayed Tokencode.
6. You will be prompted if you wish to enter a new pin. Type in y then push OK
7. Type in a numeric PIN with a length between 4 and 8 digits. Push OK. This PIN is
necessary for the RSA Soft token software to generate a Passcode for authenticating to the Cisco VPN Client.
Congratulations you have successfully created a PIN for your RSA Soft Token!
Note: Upon first login using the RSA token it might request the Next Passcode. If requested wait for the numeric Passcode to change then enter in the new code to sync your RSA Soft Token.
1. Type your numeric PIN into the RSA SecurID. Once complete hit Enter or the
Arrow.
2. Your RSA Soft token should generate a Passcode key at this time. Note a
Passcode differs from the previous Tokencode. A Passcode is necessary to authenticate to the Cisco VPN Client.
3. Open Cisco VPN Client if it is not presently. Click on Start / Programs / Cisco
Systems VPN Client / VPN Client. Highlight the location nearest you and click Connect
4. Type in the Passcode or right click and select Paste or type Ctrl-V to paste the
key into the VPN client. Note: the PIN is only necessary to generate a Passcode with the RSA Soft Token software. When typing the password into Cisco VPN do not include the PIN but only the displayed 8 digit numeric Passcode.
5. Upon first use Cisco VPN might prompt to sync the Passcode. If prompted wait for
a new PIN to generate and Type or Paste in the new 8 digit PIN then click OK
6. At this time Cisco VPN should attempt to authenticate to the security gateway. If
your connection is succesful a closed Cisco padlock is visable on your tool bar. Upon mouseover the connection status is visible. At this time you have successfully established a secure connection. You now can access the AMD domain.