Escolar Documentos
Profissional Documentos
Cultura Documentos
Cdigo code Tipo Type Sensibilidad Sensivity Retardo disparo Tripping relay Comunicaciones Communications
P1 XXXX0 0 X
Cdigo Code Cdigo interno Internal code
Tensin de alimentacin Power supply
230 V c.a.
P11941
RGU - 10
INS-SEL-0,02-0,1-0,2-0,3-0,4-0,5-0,75-1 0,03-0,1-0,3-0,5-1-3 por ajuste directo / by direct setting por ajuste directo by direct setting 3-5-10 por/by SETUP 5-10-30 por/by SETUP
110 V c.a.
Por ejemplo RGU-10 alimentado a 110 V c.a / For instance RGU-10 supplied by 110 V a.c... P11941001
DESCRIPCIN GENERAL
- Dispositivo con 2 rels programables independientes, el principal y el de prealarma. - Dispone de 2 salidas. Disparo de rel principal y la de sealizacin por prealarma. - Dispone de 1 entrada libre de potencial para realizar un ON/OFF exterior. - Carril DIN 46277 (EN 50022). - Asociado a transformador de corriente diferencial externo serie WG/WGS. - La deteccin y medida de la fuga se realiza calculando su verdadero valor eficaz (TRMS). - Visualizacin por display de los valores de ajuste y de la corriente diferencial instantnea
GENERAL DESCRIPTION
- Device with 2 independent, programmable relays, one main relay one prealarm. - It has 2 outputs. Main trip relay and prealarm signal relay. - It has 1 potential free input for external ON/OFF. - DIN rail 46277 (EN 50022) . - Associated to a WG/WGS Series external, toroidal current transformer. - Leakage detection and measurement is via calculating its true effective value (TRMS). - Displays setting values and instant current different to its associated units.
- LED ROJO: Disparo por fuga / RED LED: Leakage trip - LED AMARILLO: Prealarma / YELLOW LED: Prealarm - PULSADOR RESET / RESET BUTTON - PULSADOR TEST / TEST BUTTON - PROGRAMACIN POR SETUP / SETTING BY SETUP PROGRAMMING - PROGRAMACIN PREALARMA / SETTING BY PREALARM PROGRAMMING
Id
signals a change of status by changing from green to red. Display event type messages or values.
Cause of trip Test Poor toroidal connection Remote signal ON/OFF Current leakage
- PREALARM SIGNAL.. The yellow LED only comes on when current leakage exceeds the preset prealarm threshold. Message - OTHER DISPLAY MESSAGES.
SAVE EXIT OVR Enters setting values Exits setting mode Current leakage reading off scale
programado solo se enciende el LED amarillo. - OTROS MENSAJES POR DISPLAY. Mensaje
SAVE EXIT OVR Valida valores de configuracin. Sale fuera modo programacin. Lectura de corriente de fuga fuera de escala.
SETUP SETTINGS
buttons A long press on PROG activates the setting menu PROG . Using the PROG and in this operating mode moves and changes the preset equipment values in the different setting submenus .
button button
PROG button
50 Hz
FREQ LIM
60 Hz 10 s, 30 A 1 s, 3 A
With the PROG button the submenus are browsed and with the button the values to be selected are displayed. Press PROG to enter the value. The equipment configures the value by displaying SAVE por on the display and then exits Setting Mode. If the keypad remains inactive for a certain time, the equipment automatically exits Setting Mode and displays EXIT without changing the setting.
RGU - 10 C
M98200901-20-06B
Rel de proteccin diferencial electrnico Series RGU-10 Electronic earth-leakage protection Relay RGU-10 Series
CARACTERSTICAS TCNICAS
- Tipo de rel: Electrnico, clase A. Filtrado de corriente de alta frecuencia. - Tipo de reconexin: Manual, mediante pulsador de RESET o corte de alimentacin. - Tensin de alimentacin nominal: 230 o 110 V c.a. (+/- 20%) 50/60 Hz, 3 VA - Temperatura de trabajo: -10 / +50 C - Conexionado: Seccin cable permitida: 0,127 - 2,082 mm2 Par de apriete recomendado: 0,5-0,6 N.m Longitud de cable a desaislar: 7 mm Destornilladores recomendados: Varilla: 0,4 x 2,5 x 80 mm, longitud 160 mm Varilla: 0,6 x 3,5 x 00 mm, longitud 180 mm - Caractersticas contactos conmutados de salida 13-14-15 y 4-5-6: Corriente Nominal/Mxima corriente instantnea: 10/15 A c.a. Tensin Nominal/Mxima tensin de conmutacin: 250/110 V c.a. Carga Nominal en AC: 2 500 VA Rigidez dielctrica entre contactos abiertos: 1 000 V c.a..
TECHNICAL FEATURES
- Tipo Relay type: Electronic class A. High frequency current filtering. - Reclosing type: Manual via RESET button or by cutting power supply. - Rated power supply voltage: 230 o 110 Va.c. (+/- 20%) 50/60 Hz, 3 VA - Operating temperature: -10C / 50C - Connections: 0,127 - 2,082 mm2 Permissible cable section: Recommended tightening torque: 0.5-0.6 Nm Length of cable to strip: 7 mm Bar 0.4 x 2.5 x 80 mm, length 160 mm Recommended screwdrivers: Bar 0.6 x 3.5 x 100 mm, length 180 mm - Switch Output contact features 13-14-15 and 4-5-6 Rated current/Maximum instant current: 10/15 A a.c. Rated voltage/Maximum switching voltage: 250/110 V a.c. Rated load in AC: 2,500 VA Dielectric rigidity between open contacts: 1 000 Va.c.
Vida til elctrica para cargas AC: N de ciclos. (Ver grfico adjunto) Electrical useful life for AC loads: No. of cycles. (See graph)
Poder de corte para cargas DC: Corriente mxima de apertura. (Ver grfico adjunto) Maximun DC Load Breaking Capacity: Maximum opening current. (See graph)
- Caractersticas entrada de tensin ON/OFF externo 1-2 Entrada mediante optoacoplador Tensin mxima : 230 V c.a. ; 0,7 W
Voltage input features external ON/OFF 1-2 Input using Optocoupler Maximum voltage: 230 V a.c.; 0,7 W
L1 L2 L3 N
1S1
1S1
10 11
13 14 15
10 11
1S11S2
13 14 15
10 11
Type WG
13 14 15
1S1
1S1 1S2
1S11S2
Type WG
Type WG
1S2
1S2
Reset
Test
Reset
Reset
Test
Test
Disparo por BOBINA DE EMISIN - Rearme manual. Trip by SHUNT COIL. - Manual reclose.
CARGA
Disparo por BOBINA DE EMISIN - Rearme automtico mediante corte de alimentacin. Trip by SHUNT COIL. - Automatic reclose by power supply out.
CARGA
LOAD
LOAD
Disparo por BOBINA DE MNIMA - Rearme manual. Trip by UNDERVOLTAGE COIL. - Manual reclose.
1 S2
CARGA
LOAD
DIMENSIONES DIMENSIONS
67,9 43,5
52,5
85
14 SALIDA NC / OUTPUT NC 15 SALIDA COMN / COMMON OUTPUT ENTRADA ON/OFF EXTERNA EXTERNAL INPUT ON/OFF 1 2
ENTRADA TENSIN / INPUT VOLTAGE
4 5 6
45
Vial Sant Jordi s/n 08232 Viladecavalls (Bacelona) SPAIN Tel: (+34) 93 745 29 00 Fax: (+34) 93 745 29 14
Fijacin carril DIN 46277 (EN 50022)
M98200901-20-06B