Escolar Documentos
Profissional Documentos
Cultura Documentos
Foundry Products Division Hoffsveien 65B P.O. Box 5211 Majorstuen NO-0303 OSLO Tel: +47 22 45 01 00 Fax: +47 22 45 01 52 www.foundry.elkem.com
May form phosphine and arsine gas in contact with water, acids or bases.
Nodulariser %Si %Mg %La %Ca %RE* %Al %MgO Remag 3100 2.75 3.5 0.2 0.5 1.75 2.5 0.4 1.0 Elmag 5800 44 48 5.5 6.2 0.8 1.2 0.8 1.2 0.4 1.0 Lamet 5504 5.0 6.0 0.25 0.4 0.4 0.6 0.8 1.2 Max 0.45
*RE (Rare Earths) contains approximately 50% Ce, 25% La, 15% Nd, 5% Pr, minor amounts of Y and Sm.
1/2 Elmag, Lamet and Remag are registered trademarks owned by Elkem AS. Revised September 2006 Copyright Elkem AS
8. MgFeSi There are many ways to improve magnesium recoveries in ductile iron production. One is to reduce the magnesium content of the nodulariser, another is to increase the uniformity of the structure of the MgFeSi alloy. This is due to the better control of the Mg2Si phase in the nodulariser (see illustration below). By the special technique of casting thin layers in chill molds, Elkem produces a magnesium-ferrosilicon having a uniform magnesium content. This uniform chemistry and sizing ensure reproducibility and high magnesium yield with less flare.
9. Local Elkem representative For further information please contact our sales representative. Our specialists will help you solve any individual problems. 10. Health, Safety and Environment Refer to Elkem Safety Data Sheet No. 103. 11. Brochure See Elkem brochure Magnesium Ferrosilicon
Example of thin cast homogenous microstructure of MgFeSi with 5% Mg, 1% RE and 1% Ca.
2/2