Você está na página 1de 4

JCB DIESELMAX 444 TURBOCHARGED AFTERCOOLED TIER3 74.

2KW (100HP) & 85KW (114HP)

INDUSTRIAL POWER UNIT

745mm 388mm

1203mm

1074mm

290mm

GENERAL TECHNICAL DATA


Technical Code Thermodynamic cycle Air intake Arrangement Bore Stroke Swept Volume Mean piston speed at rated speed Valves per cylinder Cooling Direction of rotation (viewed from crank nose) Compression Ratio Rotational mass moment of inertia excluding flywheel Standard flywheel inertia Dry weight kgm kgm kg mm mm cm m/s 444 IPU T3 TCA Diesel 4 stroke TCA in-line 4 cyl. IPU 103 132 4399 9.68 4 Liquid Clockwise 17.2 0.2255 0.4061 600 Technical Code Maximum rating (1) (net intermittent) Rated speed Maximum torque (net intermittent) Maximum torque speed Maximum no load governed speed Nominal idling speed BMEP at maximum torque Emission Certification Best point specific fuel consumption (net) Specific fuel consumption @ (net) rated power Specific fuel consumption @ (net) peak torque Minimum starting temperature without auxiliaries
(1) as

444 IPU T3 TCA-74 kW rpm Nm rpm rpm rpm bar g/kWh g/kWh g/kWh C 70.1 2200 434 1300 2420 900 12.6 EPA Tier3, EU St3 210 243 210 -20

444 IPU T3 TCA-85 81 2200 434 1300 2420 900 12.6 EPA Tier3, EU St3 211 248 210 -20
A Product of Hard Work

per ISO14396 (adjusted for fan loss)

JCB DIESELMAX 444 TURBOCHARGED AFTERCOOLED TIER3 74.2KW (100HP) & 85KW (114HP)

NET POWER, TORQUE AND FUEL CONSUMPTION CURVES


80 450 250

TCA-74
70

430 410

TCA-74
245 240

TCA-74

Net Torque Nm

60 Net Power kW

BSFC (net) g/kWh 800 1000 1200 1400 1600 1800 2000 2200

390 370 350 330 310

235 230 225 220

50

40

30

290 270 215 210 800 1000 1200 1400 1600 1800 2000 2200

20 800 1000 1200 1400 1600 1800 2000 2200 Speed RPM
90

250

Speed RPM 450 250

Speed RPM

TCA-85
80

430 410

TCA-85
245 240 BSFC (net) g/kWh

TCA-85

70

Net Power kW

Net Torque Nm

390 370 350 330 310

235 230 225 220

60

50

40

290
30

270 250
800 1000 1200 1400 1600 1800 2000 2200

215 210 800 1000 1200 1400 1600 1800 2000 2200 800 1000 1200 1400 1600 1800 2000 2200

20

Speed RPM
A Rating Power B Rating Power A Rating Torque

Speed RPM
B Rating Torque

Speed RPM

A = Net continuos Power/Torque B = Net intermittent Power/Torque

A Product of Hard Work

JCB DIESELMAX 444 TURBOCHARGED AFTERCOOLED TIER3 74.2KW (100HP) & 85KW (114HP)

AIR INDUCTION
444 IPU T3 TCA-74 Maximum allowable air intake restriction with clean air filter Maximum allowable restriction with dirty air filter Air requirement for combustion at full load rated speed Turbocharging pressure at full load rated speed Turbocharger compressor outlet air temperature Charge cooler outlet temperature Heat rejected to charge cooler at maximum power Charge cooler system max pressure drop mbar mbar g/s mbar C C kW mbar 50 80 122 1100 131 60 8.2 125 444 IPU T3 TCA-85 50 80 135 1250 140 60 12 125 Lubricating oil pressure

LUBRICATING SYSTEM
44 IPU T3 TCA-74 bar C C deg deg ltrs API hrs % of fuel consumption 4.9 125 135 35 35 14 CH4 500 0.03 Maximum oil temperature at full rated speed: continuous Maximum oil temperature at full rated speed: intermittent Engine angularity limits in continuous operation: - Maximum front up and front down - Maximum right hand and left hand Total system capacity - including pipes, filters etc Minimum recommended oil grade Oil filter maintenance service interval (<75% duty cycle) Oil consumption at maximum rating 35 35 14 CH4 500 0.03 444 IPU T3 TCA-85 4.9 125 135

EXHAUST SYSTEM
44 IPU T3 TCA-74 Maximum allowable back pressure Exhaust gas temperature at full rated speed Exhaust flow at maximum output mbar C g/s 150 480 127 444 IPU T3 TCA-85 150 545 140 Injection system Fuel maximum intake restriction Fuel maximum intake temperature Engine Pre-Filter Engine Main Filter

FUEL SYSTEM
44 IPU T3 TCA-74 Rotary Mechanical mbar C Micron Micron 150 50 30 5 444 IPU T3 TCA-85 Rotary Mechanical 150 50 30 5

COOLING SYSTEM
44 IPU T3 TCA-74 Coolant capacity Water pump flow at rated speed Heat to reject from coolant at maximum power Thermostat temperature Cooling liquid maximum temperature Coolant Specification Approved (JCB HP High Performance) Headertank pressure cap setting Cooling air flow requirement Maximum working ambient temperature Fan type (standard) Fan ratio (bar) m/sec C ltrs ltr/min kW C C 18.4 240 47 est 88 110 ASTM D6210 1 2.5 46 20" pusher 1:1 444 IPU T3 TCA-85 18.4 240 54 est 88 110 ASTM D6210 1 2.5 46 20" pusher 1:1 Type (ETR - Energised To Run) Standard (Starter & Alternator) Minimum Cranking Speed

ELECTRICAL SYSTEM
44 IPU T3 TCA-74 Negative Ground ETR V rpm 12 105 145Ah. 850 CCA 444 IPU T3 TCA-85 Negative Ground ETR 12 105 145Ah. 850 CCA

Battery (not included) - minimum capacity recommended Battery (not included) - minimum cold cranking capacity

A Product of Hard Work

JCB DIESELMAX 444 TURBOCHARGED AFTERCOOLED TIER3 74.2KW (100HP) & 85KW (114HP)

STANDARD CONFIGURATION
Technical Code Flywheel housing Flywheel Cooling system Induction system Intake manifold location Exhaust manifold / Turbocharger location Turbocharger Fan drive ratio Distance between fan - crankshaft centres Main Fuel Filter & Pre-Filter Fuel pump Oil filter Oil sump Oil vapours blow-by circuit Oil heat exchanger Oil filler position Starter motor Alternator Engine stop Power Take-off: Heavy Duty Power Take-off: Light Duty Electric Harness Finish 444 IPU T3 TCA SAE 3 11.5" Aluminium Radiator with associated guards, hoses and fan included Air filter (2 stage paper element) with induction hose and depression indicator included Left hand forward Right hand rearward Wastegate controlled 1:1 262mm Included Included 1 off, left side Press steel, low noise transmission structure Open filtered, breather hose included Left side Top and left hand side 12V, 4.2kW 12V, 95A Electrical 60kW SAE B, RHS 10kW SAE A, LHS Option available Lacquered

OPTIONAL EQUIPMENT
Extensive range of configuration options available from JCB Dieselmax Sales Option Manual contact JCB Power Systems dealer or JCB Power Systems Sales Dept. for availability of specific configuration options

Printed in the UK on paper made from sustainable forests. The pulp used in the manufacture of this paper is made from renewable timber produced on a fully sustainable basis, and is bleached without the use of chlorine gas (ECF Elemental Chlorine Free). This paper is suitable for recycling.

JCB Power Systems Ltd., Dove Valley Park, Foston, Derby DE65 5BX. Tel: 01889 590312. www.jcbpowersystems.com
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5380 5/08 Issue 1

A Product of Hard Work

Você também pode gostar