Escolar Documentos
Profissional Documentos
Cultura Documentos
Digital drive is total unit which convertsall analog inputand analog output in the form of digital(0 s and 4 s) and takes parameters preprogrammed and stores data input values and drives the DC motor or Ac motor according to our speed requirement in a perfect and actuare way and without compramising torque requirement.
Working principle:
It is very similar to analog input and output will converted in the form of digital information and all the digital data will be stores in EPROM. Microprocessor will take core of the mathematical calculations and gives the required results inform of digital information.The drive perform operatio accordingly. Whereover any change of parameter will be fed to the drive through a hand held programming unit, it will be stored and the resultingly drive behaves as the feed parameters. Any fault of the drive or abnormality causes it will be displayed in the programming unit with a code no and we can view the fault value. This code will help engineer to rectify the fault immediately.
Constructional Features:
Total drive is very compact as IC chip technology is development VLSI( very large scale integrated circuits) development make everything very compact and size of 30*30*30cm. Weight of 25Kgs. When ever fault comes and failura of card occurs, converter module and communicator onboard are easily detachable and easily replaceable. Even total drive unit fails also in can be placed very easily with new unit with 400min of time andrecommision of the drive with view unit
Applications:
y Dehydrators. y Tinting wizard wintch drive. y Share cutting drive(W R mills).
Advantages:
1. Any fault can be view in the programming unit with a coda No. 2. Programming and parameter requirements san be chanfed and modified very easily with programming unit. 3. Digital drive unit is full proof unit which general occurred faults normally will be secured and identified.By this motor and equipment and workman will be safe. 4. If the systems is straight connected to computer newtork all the faults can be alarmed and shown. 5. If any fault card can be replaced very easily so userfriendly. 6. It stores 25Nos faults all the details will be stored and can be view at any time.
Disadvantages:
1. It is more costly, but overall rediable. 2. The operator should follow the manufacture manual properly