Escolar Documentos
Profissional Documentos
Cultura Documentos
Nitrogen Supply
For Coffee Packaging
www.domnickhunter.com
Coffee Packaging
improving product quality and extending shelf-life
After roasting, coffee begins to oxidize, which destroys its flavor. Packaging coffee in a nitrogen atmosphere helps to maintain the integrity of speciality ground coffee by displacing the oxygen inside packs. Nitrogen is an odorless and tasteless gas that is heavier than oxygen; therefore it pushes oxygen out from inside packs.
Nitrogen flushed packaging is often preferred over vacuum packaging because it gives a smoother packaging result. It is typically used for square bottom packs that have a one way valve to prevent air entering and pillow packs. The shelf-life of roasted and ground coffee packed in nitrogen with a metallized film and residual oxygen content of between 2% and 3% can be doubled.
We are set to recoup the capital cost of the nitrogen generator within 18-24 months, which is great because we will effectively be able to produce our own free nitrogen then, without the risk of production downtime.
James Sweeting, Lincoln & York, UK
downtime
Why MAXIGA ?
MAXIGAS is a cost effective alternative to other nitrogen gas sources, with no on-going costs such as refills, order processing or delivery charges. It is an effective gas delivery system for applications that require high flow rates and pressure levels. MAXIGAS gives manufacturers increased control over flow rates and requires minimal maintenance. It can also bring valuable space saving advantages.
How it works
MAXIGAS operates on the Pressure Swing Adsorption (PSA) principle to produce a continuous stream of nitrogen gas from compressed air. Pairs of extruded aluminum columns are filled with carbon molecular sieve (CMS). Pre-treated compressed air enters the bottom of the on-line column and flows up through the CMS. Oxygen and other trace gases are preferentially adsorbed by the CMS, allowing nitrogen to pass through. After a pre-set time the on-line column automatically switches to regenerative mode, venting contaminants from the CMS.
FDA
Materials of construction independently verified to comply with FDA code of federal regulations title 21 Food & Dairy.
EIGA Meets European Industrial Gas Association Standards; nitrogen gas approved for use as a food additive.
MAXIGAS120
Performance data
Nitrogen outlet flowrate scfh v Oxygen Concentration Model MAXIGAS104 MAXIGAS106 MAXIGAS108 MAXIGAS110 MAXIGAS112 MAXIGAS116 MAXIGAS120 10 ppm 71 104 136 169 207 278 344 100 ppm 109 169 224 278 333 447 562 500 ppm 284 425 567 715 851 1085 1315 0.1% 311 469 633 791 944 1200 1456 0.5% 496 747 998 1244 1495 1893 2291 1.0% 627 938 1255 1565 1882 2384 2885 2.0% 769 1165 1544 1931 2318 2935 3556 3.0% 911 1364 1822 2275 2727 3464 4189 4.0% 1025 1538 2045 2558 3071 3895 4713 5.0% 1135 1702 2269 2836 3404 4315 5225
Performance data based on 102 psi g (7 bar g) air inlet pressure, 68-77F (20-25C) ambient temperature. Consult domnick hunter for performance under other specific conditions.
Technical specifications
Ambient temperature range: Nitrogen outlet pressure: Min. air inlet pressure: Inlet air quality: Dewpoint: Particulate: Oil: Electrical supply: Inlet/outlet connections:
* MAXIGAS only
41 - 122F (5 - 50C) up to 232 psi g (16.5 bar g) 87 to 261 psi g (6 to 18 bar g)* -40F (-40C) <0.1 micron <0.01 mg/m3 110V/1ph/60Hz Or 220V/1ph/50Hz Air G1 / Nitrogen G1/2
741 (336) 869 (394) 1076 (488) 1283 (582) 1490 (676) 1905 (864) 2319 (1052)
Standard accessories
Oxygen analyzer for continuous monitoring of nitrogen purity. Flow verification kit. Outputs for remote monitoring alarm connections.
MAXIGAS MIDI
This range is designed to offer the most compact solution for smaller scale nitrogen requirements. (ask for leaflet ref 4791)
Other dh products
Compressed air filters Sterile air filters Compressed air dryers Laboratory gas generators Oil/water separators Condensate drains
Global Support Delivered Locally Our commitment to customer satisfaction incorporates a wide range of support services including product selection, installation, commissioning, preventative maintenance, validation and product monitoring.
dh and domnick hunter are registered trademarks of Parker-Hannifin Corporation. domnick hunter has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact your domnick hunter sales representative for detailed information and advice on a products suitability for specific applications. All products are sold subject to the Companys standard conditions of sale.
2007 Parker-Hannifin Corporation Publication Reference: 4803 01/07 Rev. 002 USA 02/07
5900-B Northwoods Pkwy. Charlotte, NC 28269 Tel: (704) 921-9303 Telefax: (704) 921-1960 Toll Free: 1-800-345-8462 www.domnickhunter.com