Escolar Documentos
Profissional Documentos
Cultura Documentos
1 The 3-pieces plano with 3 pieces of 2,7mm thick greyboard. > For traditional bookbinding and casing-in. The 3-pieces plano with 2 pieces of 2,7mm thick greyboard and the middle piece in 0,3mm thick steel sheet covered with 2 resins: the binding resin and the casing-in resin. To use with the CaseMirror to finish the inner side of the book. > For binding with Resin SteelBinding. The one-piece plano with 2 creases in the 2,7mm thick greyboard. To use with the CaseMirror. > For ring binders, folders, portfolios... The one-piece plano in 2,7mm thick greyboard. To use with the CaseMirror. > For displays, top cards, game boards... 2 hot melt
resin
O ur er m m su at th e h ac be !
Casing in with the Unibind casing-in machine? Ask for the brochure!
BCC10
Binding & Casing-in, at a speed of 400 books/hour!
The BCC10 finishes your hardcover books with the same production output as the CaseMaker 750A. The machine has 3 functions: it binds by heating up the binding resin, cases in by crimping the heated spine and gluing the CaseSheets to the steel spine and cools down the heated spine. The BCC10 ensures that the printed sheets are perfectly bound and cased in into a personalised hardcover book.
Book block / prints with or without CaseSheets (personalised) hard cover Finalised bound book
CaseMaker 750A
Input
Binding
Crimping
Cooling
Peleman Industries Inc. 11820 Wills Road, Suite 100 Alpharetta, GA 30004 USA + 1 7706746000 info@unibindna.com
info@unibind.com
CASEMAKER 750A
Case making
The CaseMaker 750A allows you to produce individually personalised hard covers. It wraps individually personalised prints around the pre-assembled CasePlanos and produces unique hard covers in a fast, easy and affordable way.
ThE bEnEFiTS
General Capacity: up to 400 covers per hour. Completely automated process. Reduced recruitment cost: the machine can be operated by a minimal trained operator. No special skills are required. User-friendly: the manual actions are limited to loading the different base materials and entering the correct settings. Versatile: suited for the production of covers for the Unibind Resin SteelBinding system and different other casing-in systems. Environment and security Completely dry concept: eliminates usage of liquid chemicals or glues. Environmentally-friendly: our hard covers are FSC certified. Performance Efficient performing design: capable to withstand any peak-requirements at high-season periods with minimum staff. Time saving: limited time spent on cleaning, daily maintenance, safety compliances and others. Continuously on standby: minimum set-up and change-over times. Extended in- and output range: adaptable to produce covers ranging from a 203mm x 203mm (8 x 8) to 305mm x 351mm (12 x 14) and spine sizes up to 21mm. In combination with the BCC10, you can create an almost fully automated process to produce individual books with 1 to maximum 2 operators, producing up to 400 finished books per hour.
SYSTEM SPECiFiCATionS
Cover size can vary between 203,2mm x 203,2mm and 304,8mm x 351mm Max. spine size: 21mm 6330 x 1280 x 1600mm (L x W x H) 3000 kg 17 KWatt (installed)
3 x 400 V or 3 x 230 V Frequency: 50~60 Hz Air pressure: 6 Bar (87 Psi) 16 A peak (at 3 x 400 V) or 25 A peak (at 3 x 230 V) Air consumption: 400 l/minute average ( 700 l/minute peak) Throughput: 400 hard covers/hour
Personalised hard cover, ready to bind Sealing the cover Sealing the mirror Forming the U-spine
Assembling the cover with heat Individually personalised printed cover material
a mirror sheet with a thin layer of hot melt on its innerside (optional)
CaseMirror: