Escolar Documentos
Profissional Documentos
Cultura Documentos
Trademarks
Nortel Networks, the Nortel Networks logo, the Globemark, Unified Networks, and [other Nortel trademarked product names] are trademarks of Nortel Networks. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation. Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated. Ethernet is a trademark of Xerox Corporation. SmartAnt is a trademark of SmartAnt Telecom Co. Ltd The asterisk after a name denotes a trademarked item.
Statement of conditions
In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Portions of the code in this software product may be Copyright 1988, Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that such portions of the software were developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission. SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties).
320757-B Rev 00
Regulatory Statements
This device is designed for installation and use in the USA, Canada, China, Taiwan, United Kingdom, Netherlands, Spain, Finland, Denmark, Sweden, Ireland, Norway, and South Africa. For operation in other countries, please consult Nortel Networks. This device contains one radio operating in the 2.4 GHz band and one radio operating in the 5 GHz bands in point-to-point fashion.
EC Declaration of Conformity
This product conforms (or these products conform) to the provisions of the R&TTE Directive 1999/5/EC.
Taiwan requirements
Bureau of Standards, Metrology and Inspection (BSMI) statement
4
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Re-orient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The installation and operation of this device shall be in strict compliance with the manufacturer's instructions for its installation and use. Any changes in the installation, or modification of the device or of its optional accessories that are not expressly approved by the manufacturer and the party responsible for compliance could void the user's authority to operate the device. Only those optional accessories listed in the operating manual shall be used with this device. The use of any other accessories (including antennas) will void the warranty and the user's authority to operate the device. The manufacturer is not responsible for interference to other radio systems caused by the use of this device or by any unauthorized modification to the device or its associated antennas. The manufacturer assumes no liability for any damage or violation of regulations arising from the use of the device. This device is designed to be installed by professionals trained in its installation and who are responsible for compliance with the relevant regulations. This device is designed for installation in fixed locations only. This device is not designed for direct connection to the public switched telephone network. Note: The use of external RF amplifiers with this device is not permitted by the regulations of the FCC. This unit is not a consumer product and requires professional network planning and installation. As such, this device is limited for use with approved antennas only. Note: The use of non-approved antennas, tampering with, or deviating from the approved deployment configurations is strictly prohibited and could result in FCC/IC (Industry Canada) regulatory violations.
320757-B Rev 00
5
This unit is not a consumer product and requires professional network planning and installation. As such, this device is limited for use with approved antennas only. Note: the use of non-approved antennas, tampering with, or deviating from the approved deployment configurations is strictly prohibited and could result in FCC/IC regulatory violations. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Afin de rduire le risque d'interfrence aux autres utilisateurs, le type d'antenne et son gain doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (p.i.r.e.) ne soit pas suprieure au niveau requis pour obtenir une communication satisfaisante. Cet appareil numrique respecte les limites de bruits radiolectriques applicables aux appareils numriques de la class B prescrites dans la norme sur le matriel brouilleur "Appareils Numeriques" (NMB-003) dicte par le ministre des Communications du Canada ATTENTION: L'utilisation d'amplificateurs RF externes avec les dispositifs de faible puissance est strictement interdit. Ce dispositif a t conu pour fonctionner avec une antenne optionnelle de 5GHz ayant un gain maximal de 14 dBi. Une antenne ayant un gain plus lev est strictement interdit par les rglements d'Industrie Canada. L'impdance d'antenne requise est 50 ohms. Ce dispositif a t conu pour fonctionner avec une antenne de 2.4GHz ayant un gain maximal de 4 dBi. Une antenne ayant un gain plus lev est strictement interdit par les rglements d'Industrie Canada. L'impdance d'antenne requise est 50 ohms. L'installateur du prsent matriel radio doit s'assurer que l'antenne est situe ou pointe de manire ce que cette dernire n'mettre pas de champs radiolectriques suprieurs aux limites spcifies par Sant Canada pour le grand public; consulter le Code de scurit 6, disponible sur le site Web de Sant Canada, l'adresse suivante: www.hcsc.gc.ca/ rpb. Cet appareil est seulement pour usage commercial et requiert une installation professionnelle certifie. L'usage de cet appareil est limit aux antennes certifies stipules par le fabricant. ATTENTION: L'usage d'antennes autres que stipules par le fabricant est prohib et peut rsulter en une violation des critres d'approbation FCC et Industrie Canada pour lequel cet appareil est homologu.
6
SOFTWARE. USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE AGREEMENT. If you do not accept these terms and conditions, return the Software, unused and in the original shipping container, within 30 days of purchase to obtain a credit for the full purchase price. Software is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies. Nortel Networks grants you a license to use the Software only in the country where you acquired the Software. You obtain no rights other than those granted to you under this License Agreement. You are responsible for the selection of the Software and for the installation of, use of, and results obtained from the Software. 1. Licensed Use of Software. Nortel Networks grants Customer a nonexclusive license to use a copy of the Software on only one machine at any one time or to the extent of the activation or authorized usage level, whichever is applicable. Software is not transferable, or applicable, or entitled to third parties on subsequent resale of the equipment. To the extent Software is furnished for use with designated hardware or Customer furnished equipment (CFE), Customer is granted a nonexclusive license to use Software only on such hardware or CFE, as applicable. Software contains trade secrets and Customer agrees to treat Software as confidential information using the same care and discretion Customer uses with its own similar information that it does not wish to disclose, publish or disseminate. Customer will ensure that anyone who uses the Software does so only in compliance with the terms of this Agreement. Customer shall not a) use, copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engineer or otherwise translate the Software; c) create derivative works or modifications unless expressly authorized; or d) sublicense, rent or lease the Software. Licensors of intellectual property to Nortel Networks are beneficiaries of this provision. Upon termination or breach of the license by Customer or in the event designated hardware or CFE is no longer in use, Customer will promptly return the Software to Nortel Networks or certify its destruction. Nortel Networks may audit by remote polling or other reasonable means to determine Customers Software activation or usage levels. If suppliers of third party software included in Software require Nortel Networks to include additional or different terms, Customer agrees to abide by such terms provided by Nortel Networks with respect to such third party software. 2. Warranty. Except as may be otherwise expressly agreed to in writing between Nortel Networks and Customer, Software is provided AS IS without any warranties (conditions) of any kind. NORTEL NETWORKS DISCLAIMS ALL WARRANTIES (CONDITIONS) FOR THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OF NON-INFRINGEMENT. Nortel Networks is not obligated to provide support of any kind for the Software. Some jurisdictions do not allow exclusion of implied warranties, and, in such event, the above exclusions may not apply. 3. Limitation of Remedies. IN NO EVENT SHALL NORTEL NETWORKS OR ITS AGENTS OR SUPPLIERS BE LIABLE FOR ANY OF THE FOLLOWING: a) DAMAGES BASED ON ANY THIRD PARTY CLAIM; b) LOSS OF, OR DAMAGE TO, CUSTOMERS RECORDS, FILES OR DATA; OR c) DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), WHETHER IN CONTRACT, TORT OR OTHERWISE (INCLUDING NEGLIGENCE) ARISING OUT OF YOUR USE OF THE SOFTWARE, EVEN IF NORTEL NETWORKS, ITS AGENTS OR SUPPLIERS HAVE BEEN ADVISED OF THEIR POSSIBILITY. The forgoing limitations of remedies also apply to any developer and/or supplier of the Software. Such developer and/or supplier is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions and, in such event, they may not apply. 4. General a. If Customer is the United States Government, the following paragraph shall apply: All Nortel Networks Software available under this License Agreement is commercial computer software and commercial computer software documentation and, in the event Software is licensed for or on behalf of the United States Government, the respective rights to the software and software documentation are governed by Nortel Networks standard commercial license in accordance with U.S. Federal Regulations at 48 C.F.R. Sections 12.212 (for non-DoD entities) and 48 C.F.R. 227.7202 (for DoD entities).
320757-B Rev 00
7
b. Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer fails to comply with the terms and conditions of this license. In either event, upon termination, Customer must either return the Software to Nortel Networks or certify its destruction. Customer is responsible for payment of any taxes, including personal property taxes, resulting from Customers use of the Software. Customer agrees to comply with all applicable laws including all applicable export and import laws and regulations. Neither party may bring an action, regardless of form, more than two years after the cause of the action arose. The terms and conditions of this License Agreement form the complete and exclusive agreement between Customer and Nortel Networks. This License Agreement is governed by the laws of the country in which Customer acquires the Software. If the Software is acquired in the United States, then this License Agreement is governed by the laws of the state of New York.
c.
d. e. f.
320757-B Rev 00
Contents
Chapter 1 Installing the Wireless AP 7215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Limitations and restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installation flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Installing the Wireless AP 7215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Verifying the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Recording the serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Installing the Wireless AP 7215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connecting the power cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Connecting an Ethernet cable to a Wireless AP 7215 @ NAP . . . . . . . . . . . . . . . 20 Installing an external 5 GHz antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Verifying correct operation through the LED indicators . . . . . . . . . . . . . . . . . . . . . 21
10
320757-B Rev 00
11
Figures
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Flowchart for installing the Wireless AP 7215 . . . . . . . . . . . . . . . . . . . . . 16 Wireless AP 7215 label showing serial number and MAC address . . . . . 17 Mounting the mechanical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Mounting the Wireless AP 7215 on the mechanical support . . . . . . . . . . 18 Securing the Wireless AP 7215 to the mechanical support . . . . . . . . . . . 19 Connecting the AC power adapter to the Wireless AP 7215 . . . . . . . . . . 19 Connecting an Ethernet cable to the Wireless AP 7215 @ NAP . . . . . . . 20 Connecting 5 GHz antennas to the SMA connector ports of a Wireless AP 7215 21 Standard package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Wireless AP 7215 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12
320757-B Rev 00
13
Tables
Table 1 Table 2 Table 3 Wireless AP 7215 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Wireless AP 7215 standard package contents (NTE310AG) . . . . . . . . . . 23 Wireless AP 7215 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14
320757-B Rev 00
15
Installation flowchart
Figure 1 Flowchart for installing the Wireless AP 7215
If installing a Wireless AP @ NAP, connect the Ethernet cable to the wired network.
If you have optional 5GHz antennas, install the antennas and note the port to which the antennas are connected.
Apply power and verify correct operation through the LED indicators.
320757-B Rev 00
Figure 2 Wireless AP 7215 label showing serial number and MAC address
Mounting holes
Align the three keyhole slots of the Wireless AP 7215 with the keyed knobs of the units mechanical support mount. Slide the Wireless AP 7215 to the left until you hear a click to indicate that the keyed knobs are locked into the keyhole slots.
Keyhole slot
Keyed Knob
320757-B Rev 00
Secure the installed Wireless AP 7215 to the mounted mechanical support using the Torx head screw provided.
Torx screw
7 8 9
Connect the DC power cord of the power AC adapter to the power input socket of the unit. Connect the power cord to the closest AC outlet. If you are installing a standalone Wireless AP 7215, proceed to the section Verifying correct operation through the LED indicators. If you are installing a Wireless AP 7215@NAP, proceed to the section Connecting an Ethernet cable to a Wireless AP 7215 @ NAP.
If you are installing a standalone Wireless AP 7215 with an external 5 GHz antenna, proceed to the section Installing an external 5 GHz antenna.
11 If you are installing a Wireless AP 7215 @ NAP with an external 5 GHz antenna, proceed to the section Installing an external 5 GHz antenna. If you are not installing a Wireless AP 7215 @ NAP with an external 5 GHz antenna, proceed to the section Verifying correct operation through the LED indicators.
320757-B Rev 00
Chapter 1 Installing the Wireless AP 7215 21 Figure 8 Connecting 5 GHz antennas to the SMA connector ports of a Wireless AP 7215
14 Install the external 5 GHz antenna unit using the mounting bracket hardware provided in the Wireless AP 7215 External Transit Link Antenna Kit. Warning: The Wireless AP 7215 is intended for professional installation by a qualified installer for industrial/commercial use. Physical installation of antenna accessories must comply with a minimum separation of at least 20 centimeters from all persons.
Solid Green
320757-B Rev 00
23
Wireless AP 7215
Power Adapter
Mechanical Support
Installation Guide
320757-B Rev 00
1 meter cable
320757-B Rev 00
27
Location
When installing the Wireless AP 7215 unit choose a location that is indoors provides a minimum separation of 20 centimeters from all persons during normal operation for units installed using integral or external approved antennas for regulatory compliance minimizes the possibility of vandalism or accidental harm to the unit
For information on custom mounting options, contact Nortel Networks (see Appendix C, Getting technical manuals and support).
Supplying AC power
The Wireless AP 7215 requires a continuous supply of power, routed through the power adapter included in the standard package, from AC supplies in the range 100V-240V and 45 Hz-65 Hz.
320757-B Rev 00
29
From the Technical Support page, you can open a Customer Service Request online or find the telephone number for the nearest Technical Solutions Center. If you are not connected to the Internet, you can call 1-800-4NORTEL (1-800-466-7835) to learn the telephone number for the nearest Technical Solutions Center. An Express Routing Code (ERC) is available for many Nortel Networks products and services. Nortel Wireless Mesh Network ERC code is 1570. When you use an ERC, your call is routed to a technical support person who specializes in supporting that product or service. To locate an ERC for your product or service, go to www.nortelnetworks.com/help/contact/erc/index.html.
320757-B Rev 00