Escolar Documentos
Profissional Documentos
Cultura Documentos
SDH/SONET
Ethernet
DWDM
OPTera
For established service providers who are seeing continued growth in demand for 2 Mbit/s line services, the Nortel Networks TN-4T is an STM-4 terminal multiplexer that provides high-availability, high-density 2 Mbit/s service access to the SDH transport network. Unlike other possible alternatives, this solution minimises the investment requirement by our customers to scale their network infrastructure and meet new service demands.
Introduction
Mainstream service providers and network operators deploying SDH transport networks are seeing a sustained growth in demand for 2 Mbit/s private line services. According to various industry analysts, 2 Mbit/s service revenue across European and International markets is projected to increase at a CAGR in the range of 9-18% to 2005 despite declining service tariffs. Demand is driven from several applications, including enterprise data networking and GSM mobile networks as well as traditional voice network support. Since private or leased line services a primary contributor to core profitable revenue for most providers form the bulk of transport network requirements, its essential to both lower the cost of supporting those services and also increase the efficiency of supporting those services. The Nortel Networks TransportNode TN-4T helps service providers to reduce network complexity and ensure maximum return on their SDH infrastructure investment, as even demand for 2 Mbit/s service transport increases.
STM-16 ring
252x 2 Mbit/s service interfaces 2x STM-4 1+1 MSP Similar application with: OPTera Metro 4100, 4200 TransportNode 16X, 64X OPTera Connect DX OPTera Metro 5200
VC-12 management
TN-4T
TN-4T
Product Description
The TN-4T is a full member of Nortel Networks portfolio of solutions for Optical Metro networks. It is an STM-4 terminal multiplexer that increases the density of 2 Mbit/s service provision and lowers the footprint and power requirements at an operating location, compared with previously available alternatives. It can be deployed in a number of terminal and hub configurations to flexibly suit different network deployment scenarios. The TN-4T provides full access to an STM-4 transport aggregate at VC-12 granularity delivering up to 252x protected 2 Mbit/s service interfaces per shelf.
For example a TN-4T can be configured to feed into an STM-4 or STM-16 ring using OPTera Metro 4100 or 4200. This setup allows add/drop or through VC-12 connections to be configured at other OPTera Metro 4000 network elements around the ring. A TN-4T can also be configured to feed into an STM-16 ring using TN-16X. In this setup, the connection is a linear point-topoint connection since a TN-16X manages signals at the VC-4 level. Any TN-16X network elements must be configured with a through STM-4 connection.
Network Applications
Primary applications of the TN-4T are in local and regional SDH networks, where service providers need to efficiently deliver and/or aggregate a singificant number of 2 Mbit/s services.
Key Benefits
High service availability High service density High scalability Fully managed solution Flexible deployment
TN-4T supports proven remote download of operational and configuration software and upload of configuration data, without impacting live traffic. This enables in-service upgrades to be efficiently carried out from a central location. Presides range of value-added management applications deliver rapid, right first-time end-to-end service activation together with network-wide service assurance. As well as dramatically speeding up time-to-revenue, this minimises service downtime and maximises utilisation of network resources.
Product Features
Up to 252x 2 Mbit/s tributaries per shelf (ETSI compliant) supporting VC-12 connectivity Up to 8x electrical interface cards, 32x 2 Mbit/s asynchronous tributaries per card, (PDH G.703 with 75 ohm and 120 ohm interface options) Dual STM-4 G.957 S.4.1 short-haul optical aggregate interfaces with Automatic Laser Shutdown (ALS) 1+1 Multiplex Section Protection (MSP) of STM-4 optical interfaces 1:N protection of tributary cards (N=4 maximum) Duplicated PSU and SEMF (shelf controller) functions Synchronisation via STM-4 interfaces or built-in G.813 timing source Comprehensive fault monitoring and performance monitoring to G.826 F interface (RS-232) for local craft access terminal (PC with HTML browser or Command Line interface) Q3 interface via Embedded Communications Channel (ECC) to EC-1 (Element Controller) and/ or Nortel Networks Preside service-enabling software Power (range -38 V to -75 V DC)
High Scalability
The TN-4T is a full member of Nortel Networks OPTera Metro family of Multiservice SDH and DWDM transport solutions. It can be deployed on a per-shelf basis to meet capacity demands and service interface cards added as required with low initial costs.
Flexible Deployment
The extension shelf concept gives flexibility in physical deployment to suit any practical constraints or requirements that may exist. For example, the TN-4T shelf may be located close to a large voice switch facility, thus minimising cable interconnections, whilst the main SDH transport node is located elsewhere. The TN-4T is fully compatible with other Nortel Networks optical networking products including our established OPTera Metro 4100, 4200, TransportNode 16X, 64X and OPTera Connect DX products, allowing our customers to tune-up their networks and develop a more efficient network utilisation. When combined with our OPTera Metro 5000 DWDM transport platform, a new set of applications may be addressed by the TN-4T.
Benefits
Nortel Networks Optical Metro Solutions allow service providers to economically support the growing diversity and capacity demands of their customers in an increasingly unpredictable, seemingly chaotic market and gain new sources of profitable revenue. Our wide portfolio of products allows operators to make their own strategic choices and build or extend their network using the best mix of technology options IP packet, Ethernet, SDH/SONET and DWDM all have their part to play in a service-oriented network. Our portfolio is designed to be scalable and forecast-tolerant so whether building a new greenfield network or exploiting an existing network investment, you can be confident of supporting not only todays service demands but evolving to meet those of the unforeseen future. In todays fast-moving competitive environment, high performance, availability and reliability are critical for your customer satisfaction at Nortel Networks, carrierclass is not a bolt-on afterthought, but an intrinsic part of product and solution development. As leading operators drive the Optical Internet Edge ever-closer to individual users, success ultimately comes from achieving a profitable business in new Metro networks. Todays profitable reality from Nortel Networks: Any Service, Anywhere, Any Time delivered at the lowest cost per managed service.
Nortel Networks Maidenhead Office Park Westacott Way Maidenhead, Berkshire SL6 3QH United Kingdom European Customer Information Centre Tel 00 800 8008 9009* + 44 (0) 20 8920 4618
* Number accessible from most European countries
Features
Supports both new value-add and classic telecommunication services Provides choice of customer solutions from the widest portfolio of products Supports Regional, Metropolitan and Business Access network applications Exploits both new and established DWDM, TDM and Packet technologies Delivers transparent optical networking on the OPTera Metro platform Delivers managed multi-services on SDH/SONET transport platforms Delivers Optical IP services with OPTera Packet Edge solutions Manages interconnection and bandwidth with OPTera Connect solutions Enables services and network operations with the Preside management solution Ensures carrier-class performance, availability and scalability
http://www.nortelnetworks.com
Publication ref: 35.482.02-06-01 eu_en31.014.25-05-00EU_EN Printed June 2001