Você está na página 1de 3

Cisco Networking Academy

Page 1 of 3

Assessment System
Skip to Time Left | Skip to Navigation | Skip to Assessment Items

Take Assessment - EWAN Final Exam - CCNA Exploration: Accessing the WAN (Version 4.0)
Time Remaining: 00:05:11 <Prev Page: 5 GO 41 Which combination of Layer 2 protocol and authentication should be used to establish a link without sending authentication information in plain text between a Cisco and a non-Cisco router? PPP with PAP PPP with CHAP HDLC with PAP HDLC with CHAP Showing 5 of 6 42 At what physical location does the responsibilty for a WAN connection change from the user to the service provider? demilitarized zone (DMZ) demarcation point local loop cloud 43 What will be the result of adding the command ip dhcp excluded-address 192.168.24.1 192.168.24.5 to the configuration of a local router that has been configured as a DHCP server? Traffic that is destined for 192.168.24.1 and 192.168.24.5 will be dropped by the router. Traffic will not be routed from clients with addresses between 192.168.24.1 and 192.168.24.5. The DHCP server will not issue the addresses ranging from 192.168.24.1 to 192.168.24.5. The router will ignore all traffic that comes from the DHCP servers with addresses 192.168.24.1 and 192.168.24.5. 44 A light manufacturing company wishes to replace its DSL service with a non-line-of-sight broadband wireless solution that offers comparable speeds. Which solution should the customer choose? Wi-Fi satellite WiMAX Metro Ethernet 45 Next>

Refer to the exhibit. What statement is true about the core router devices? They use multiport internetworking devices to switch traffic such as Frame Relay, ATM, or X.25 over the WAN. They provide internetworking and WAN access interface ports that are used to connect to the service provider network. They provide termination for the digital signal and ensure connection integrity through error correction and line monitoring.

http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml

24/09/2011

Cisco Networking Academy

Page 2 of 3

They support multiple telecommunications interfaces of the highest speed and are able to forward IP packets at full speed on all of those interfaces. 46 Which configuration on the vty lines provides the best security measure for network administrators to remotely access the core routers at headquarters?

47 When would the multipoint keyword be used in Frame Relay PVCs configuration? when global DLCIs are in use when using physical interfaces when multicasts must be supported when participating routers are in the same subnet 48 A company has its headquarters office in Dallas and five branch offices located in New York, Chicago, Los Angeles, Seattle, and Atlanta. WAN links are used for communications among offices in six sites. In planning the WAN links, the network designer is given two requirements: (1) minimize cost and (2) provide a certain level of WAN link reliability with redundant links. Which topology should the network designer recommend? star full mesh hierarchical partial mesh 49

http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml

24/09/2011

Cisco Networking Academy

Page 3 of 3

Refer to the exhibit. In the partial router configuration that is shown, what is the purpose of access list BLOCK_XYZ? to prevent source IP address spoofing by hosts on the Fa0/0 LAN to block access by Fa0/0 LAN hosts to all network services beyond the router to prevent users on the Fa0/0 LAN from opening Telnet sessions on the router to secure Fa0/0 hosts by allowing only locally sourced traffic into the Fa0/0 LAN 50

Refer to the exhibit. A network administrator is attempting to configure a Frame Relay network. The administrator enters the commands as shown in the exhibit on R2, but the Frame Relay PVCs are inactive. What is the problem? The incorrect DLCI numbers are being configured on R2. The S0/0/0 interface on R2 needs to be point-to-point. The frame-relay map commands are missing the cisco keyword at the end. A single router interface cannot connect to more than one Frame Relay peer at a time. Showing 5 of 6 Next> Page: 5 GO <Prev

All contents copyright 1992-2011 Cisco Systems, Inc. Privacy Statement and Trademarks

http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml

24/09/2011

Você também pode gostar