Escolar Documentos
Profissional Documentos
Cultura Documentos
Programação Scanner VS2200
Programação Scanner VS2200
Test Mode
Use this feature to place the scanner into a testing, or “demo” mode. This
special mode disables the scanner interface, meaning that bar code data is
not sent out to the host via the scanner interface. This allows the bar code
to be scanned continuously without requiring a response from the POS
terminal.
To return the scanner to normal function, scan the TEST MODE = DIS-
ABLE bar code below.
DO NOT scan the SWITCH bar code before and after scanning the bar
codes on this page.
Scanning the TEST MODE = DISABLE bar code sets the Double
NOTE Read Timeout to 600ms.
SWITCH LABEL
Great care should be taken to select the correct interface type, since you
can cause damage to the scanner and/or POS terminal by attempting to
change to an incompatible interface. ALWAYS make interface selections
with the host cable DISCONNECTED.
CAUTION
RS-232 Features
SWITCH LABEL