Escolar Documentos
Profissional Documentos
Cultura Documentos
HeadquartersD elhi, Ind ia Key people R S Sharma, Chairman & Managing Director Products Electricity Revenue 50,188.52 crore (US$ 10.89 billion)(2009-10)[1] Net income 8,837.65 crore (US$ 1.92 billion)(2009-10)
EVOLUTION OF NTPC
NTPC was set up in 1975 with 100% ownership by the Government of India. In the last 30 years, NTPC has grown into the largest power utility in India. In 1997, Government of India granted NTPC status of Navratna being one of the nine jewels of India, enhancing the powers to the Board of Directors. NTPC became a listed company with majority Government ownership of 89.5%. NTPC becomes third largest by Market Capitalisation of listed companies The company rechristened as NTPC Limited in line with its changing business portfolio and transform itself from a thermal power utility to an integrated power utility. NTPC is the largest power utility in India, accounting for about 20% of Indias installed capacity. 1975 1997 2005 2004 Sites of NTPC NTPC Head Quarters
Sr. No. Head Quarter City 1 NCR HQ Delhi 2 ER-I, HQ Patna 3 ER-II, HQ Bhubaneswar 4 NER Lucknow 5 SR HQ Hyderabad 6 WR HQ Mumbai NTPC Project Sites: 1 Singrauli Uttar Pradesh 2,000 2 Korba Chhattisgarh 2,100 3 Ramagundam Andhra Pradesh 2,600 4 Farakka West Bengal 1,600 5 Vindhyachal
Madhya Pradesh 3,260 6 Rihand Uttar Pradesh 2,000 7 Kahalgaon Bihar 2,340 8 NCTPP, Dadri Uttar Pradesh 1,330 9 Talcher Kaniha Orissa 3,000 10 Unchahar Uttar Pradesh 1,050 11 Talcher Thermal Orissa 460 12 Simhadri Andhra Pradesh 1,000 13 Tanda Uttar Pradesh 440 14 Badarpur Delhi 705 15 Sipat-II Chhattisgarh 1000 16 Sipat-I(erection phase) Chhattisgarh 1980 17 Bongaigaon(erection phase.) Assam
An ERP system can either reside on a centralized server or be distributed across modular hardware and software units that provide "services" and communicate on a local area network. The distributed design allows a business to assemble modules from different vendors without the need for the placement of multiple copies of complex and expensive computer systems in areas which will not use their full capacity
Manufacturing
Engineering, bills of material, work orders, scheduling, capacity, workflow management, quality control, cost management, manufacturing process, manufacturing projects, manufacturing flow
Financials
General ledger, cash management, accounts payable, accounts receivable, fixed assets
Project management
Costing, billing, time and expense, performance units, activity management
Human resources
Human resources, payroll, training, time and attendance, rostering, benefits Customer relationship management Sales and marketing, commissions, service, customer contact, call-center
support
Data services Various "self-service" interfaces for customers, suppliers and/or employees
Access control
Management of user privileges for various processes
NTPC uses 3 different types of networks for the purpose of communication among its various sites. These are listed below:
ISDN Network
ISDN is the Integrated Service Digital Network. This Network is provided by operators like BSNL or VSNL, in the form of a leased line which is a dedicated line. The speed provided is up to 2 mbps.
VSAT Network
VSAT or Very Small Aperture Network is a satellite based network. It is used as a backup network. The speed provided by VSAT is about 2 mbps.
Launch Date
28.09.2003
Launch site French Guyana Launch vehicle Ariane5-V162 Orbit Geostationary Orbit
VSATs access satellites in geosynchronous orbit to relay data from small remote earth stations (terminals) to other terminals (in mesh configurations) or master earth station "hubs" (in star configurations).
Technology:
VSAT was originally intended for sporadic store-and-forward data communications but has evolved into real-time internet services. VSAT uses existing satellite broadcasting technology with higher powered components and antennas manufactured with higher precision than conventional satellite television systems. The satellite antenna at the customer's location includes, in addition to the receiver, a relatively high-powered transmitter that sends a signal back to the originating satellite. A very small portion of a transponder is used for each VSAT return path channel. Each VSAT terminal is assigned a frequency for the return path which it shares with other VSAT terminals using a shared transmission scheme such as time division multiple access. An innovative feature of VSAT is that the technology has evolved to the point that something that previously could only be done with large, high- powered transmitting satellite dishes can now be done with a much smaller and vastly lower-powered antenna at the customer's premises.
In addition, several return-path channels can co-exist on a single satellite transponder, and each of these return-path channels is further subdivided using to serve multiple customers. Now days, nearly all VSAT systems are now based on IP, with a very broad
History:
The first commercial VSATs were C band (6 GHz) receiveonly systems by Equatorial Communications using spread spectrum technology. More than 30,000 60 cm antenna systems were sold in the early 1980s. Equatorial later developed a C band (4/6 GHz) 2 way system using 1 m x 0.5 m antennas and sold about 10,000 units in 1984-85. In 1985, Schlumberger Oilfield Research co-developed the world's first Ku band (12/14 GHz) VSATs with Hughes Aerospace to provide portable network connectivity for oil field drilling and exploration units. Ku Band VSATs make up the vast majority of sites in use today for data or telephony applications. A recent breakthrough in the VSAT technology has enabled us to use Ka band frequency which further reduces the size of Antenna to 3 meters.
Configuration:
Most VSAT networks are configured in one of these topologies:
A star topology, using a central uplink site, such as a network operations center
(NOC), to transport data back and forth to each VSAT terminal via satellite.
A mesh topology, where each VSAT terminal relays data via satellite to another
terminal by acting as a hub, minimizing the need for a centralized uplink site. A combination of both star and mesh topologies. Some VSAT networks are configured by having several centralized uplink sites (and VSAT terminals stemming from it) connected in a multi-star topology with each star (and each terminal in each star) connected to each other in a mesh topology. Others configured in only a single star topology sometimes will have each terminal connected to each other as well, resulting in each terminal acting as a central hub. These configurations are utilized to minimize the overall cost of the network, and to alleviate the amount of data that has to be relayed through a central uplink site (or sites) of a star or multi-star network.
VSAT is a satellite based communication service that offers a flexible and reliable communication solution including Enterprise Wide Networking with high reliability and reach that extends even to remote sites.
Ka 18 to 31 Small High Severe However, NTPC uses C Band frequency range (4GHz to 6 GHz). NTPC has been assigned Transponder No. 3 in the recently launched satellite INSAT 3E with uplink frequency range of 5.925 GHz to 6.425 GHz and downlink frequency range of 3.7 GHz to 4.2 GHz. The central frequency range used by NTPC to uplink and downlink its signals are 6025000Hz and 3800000 Hz respectively. The frequency at which satellite confirms its position by sending a signal is called the Beacon Signal, and in case of INSAT 3E it is 4197.51 MHz which is measured with a spectrum analyzer connected to antenna through the LNA.
Ground Segment:
This is primarily called the Earth Terminal segment, The Earth terminal (or equipment at the customers premises) can typically be divided into two parts 1. Outdoor unit 2. Indoor Unit The outdoor unit is generally, ground or even wall mounted and the indoor unit, which is the size of a desktop computer, is normally located near existing computer equipment in your office.
Satellite communication concept Note: HPA High Power Amplifier (Earth Station equipment that amplifies the transmit RF signal) CPE Customer Premises Equipment (eg. Telephone, PABX, Ethernet hub, host server etc.) VSAT Specifications Antenna diameter: 11 m Traffic Capacity: 9.6 kbps 2 mbps Diagram Frequency Bands: C-Band (4/6 GHz) Ku-Band (12/14 GHz) Ka-Band (20/30 GHz) Network: Point-to-Point Configuration: Point-to-Multipoint Equipment List:
hassis Note: Antenna size is used to describe the ability of antenna to amplify the signal strength; Outdoor unit (ODU) is connected through a low-loss coaxial cable to the indoor unit (IDU) called IFL (Inter-facility Link).
Antenna varies antenna size is describe the ability of the antenna to amplify the signal strength feed-horns directs transmitted power to antenna dish or collects the received power from it.
2.Antenna Tracker
This checks the voltage level of the signal and when reduced automatically moves the dish antenna to track the maximum strength. Tracking modes (For checking): a)Time mode The antenna tracker checks for the voltage level after every 10 sec, 20 sec or whatever time is. b) Signal Mode The antenna tracker tracks the antenna to obtain the maximum signal strength whenever there is a difference of 3dB. c)Time and Signal mode It is the combination of both the above modes. The antenna tracks the signal whenever the signal strength decreases. Half Power Beam Width (HPBW) It is a parameter to check the strength of the signal. The width of the beam when the there is a difference of 3 dB from the maximum point of the gain i.e. beam width at that point of half power. Given by HPBW = 70/DxD where = Wavelength D = Diameter of antenna =V/n V = Velocity of the wave As the antenna size is decreased HPBW increases as D is inversely proportional to HPBW. Hence tracking in small antennas is not required but in case of antennas with big diameter, tracking is essential. Antenna Control Unit
requirements, eg. 1kW, 3kW 2. No tuning required as the signal is wide band signal 2. Needs tuning so that maximum gain is achieved at a particular frequency. Narrow band signal. 3. Suitable for NTPC as power rating is low 3. Also used. NTPC CSES has got both types of High Power Amplifiers. Both run each at a time to avoid burnout. So to avoid heating up we use Klystron II & TWT HPA alternatively. 4. 4. Working of Travelling Wave Tube (TWT): This device is an elongated vacuum tube with an electron gun (a heated cathode that emits electrons) at one end. A solenoid coil wrapped around the tube creates magnetic field which focuses the electrons into the beam, which then passes down the middle of a wire helix that stretches the length of the tube, finally striking a collector at the other end. (In Lower power devices, the solenoid coil can be replaced by permanent magnets) A directional coupler, which can be either a waveguide or an electromagnetic coil, fed with low powered radio signal that is to be amplified, is positioned near the emitter, includes a current into the helix. The helix acts as a delay line, in which the RF signal travels at the same speed along the tube as the electron beam. The electromagnetic field due to the current in the helix interacts with the electron beam, causing bunching of the electrons (an effect called velocity modulation), and the electromagnetic field due to the beam current then induces more current back into the helix (i.e. the current builds up and thus is amplified as it passes down). A second directional coupler, positioned near the collector, receives an amplified version of the input signal from the far end of the helix. An attenuator prevents any reflected wave from travelling back to the cathode. The bandwidth of a broadband TWT can be as high as one octave, although tuned (narrowband) versions exist, and operating frequencies range from 300MHz to 50 GHz. The voltage gain of the tube can be of the order of 40 decibels. A TWT integrated with a regulated power supply and protection circuits is referred to as a Travelling Wave Tube Amplifier (TWTA). Working of a Klystron II Tube: Klystrons are used as an oscillator or amplifier at microwave frequencies to produce both low power reference signals for super heterodyne radar receivers and to produce high power carrier waves for communications and the driving force for linear accelerators,
It has the advantage (over the magnetron) of coherently amplifying the reference signal and so its output may be precisely controlled in amplitude, frequency and phase. Many Klystrons have a waveguide for coupling microwave energy into and out of the device, although it is quiet common for lower power and lower frequency klystrons to use coaxial couplings instead. In some cases a coupling probe is used to couple the microwave energy from a klystron into a separate external waveguide. A klystron makes use of speed-controlled streams of electrons that pass through a resonating cavity. Electrons in a klystron are accelerated to a controlled speed by the application of several hundred volts. As the electrons leave the heated cathode of the tube, they are directed through a narrow gap into a resonating chamber, where they are acted upon by a RF signal. The electrons bunch together and are directed into one or more additional chambers that are tuned at or near the tubes operating frequency. Strong RF fields are induced in the chambers as the electron bunches give up energy. These fields are ultimately collected at the HPA alternatively. NTPC CSES has got both types of HPAs. Both are run each at a time to avoid burnout. So to avoid heating up we use Klystron II & TWT HPA alternatively.
The center frequency of up converter is 6025 MHz and Down converter is 3800 MHz. In C band, up converter converts 70 MHz frequency to 5.9-6.4 GHz and just the opposite occurs in down converter.
Modem:
Modem is a combination of two wordsM odulation andDe modulation. This is a device which modulates the transmitting signal and demodulates the receiving signal. A communication device that converts one form of signal into another that is suitable for transmission over communication circuits, typically from digital to analog and then from analog to digital. Modulation means superimposing the baseband signal on a carrier of high frequency so that it can be transmitted and demodulation is just vice versa of it i.e. it extracts the message signal from carrier wave at receiving end.
Quantization Quantizing refers to use of a finite set of amplitude levels and a selection of
level nearest to a particular sample value of the message signal as the representation for it. Multiplexer
Pulse Code Modulation In PCM system, the message signal is sampled and
the amplitude of each sample is rounded off to the nearest one of a finite set of allowable values, so both time and amplitude are quantized. Compressor It reduces the output frequency (compresses) to optimum level.
Router:
A device or setup that finds the best route between any two networks, even if there are several networks to traverse, such a device is called router. Like bridges, remote sites can be connected using routers over dedicated or switched lines to create WANs. There are data ports in router known as DTE ports. It is a 25 pin data port. When two routers are connected i.e. same ports then there is a cross connection. But when different ports are connected like port of router with DCE port of MUX then there will be straight connection. Router Exchange Exchange: A workplace that serves as a telecommunication facility where lines from telephone can be connected together to permit communication is called Exchange. The voice signal from modem + mux is sent to exchange so that it can distribute it to its telephone subscribers. In NTPC 184 trunk lines are possible. Parameters: Route Number It specifies NTPC site which has to receive data. Trunk number Transmission network Lens number Combination of Module, unit, group (chord) & circuit number. Communication between two Sites via VSAT: CSES NOIDA
VSAT Topology:
STARthe hub station controls and monitors can communicates with a
large number of dispersed VSATs. Generally, the Data Terminal Equipment and 3 hub antenna is in the range of 6-11 m in diameter. Since all VSATs communicate with the central hub station only, this network is more suitable for centralized data applications.
SCPC overview
In the Hub-to-Remote configuration, one end of the VSAT link (normally the customers HQ) is connected to the 11m VSAT Hub (Earth Station) via a terrestrial leased line. A VSAT antenna at the remote end or the distant end (normally the branch office) of the VSAT link is then interconnected to the VSAT hub via the satellite. VSAT links with a Remote to Remote configuration bypass the VSAT Hub and has a standalone VSAT antenna at both ends of the link. Typical VSAT antenna size ranges from 1.8m to 2.4m.
different earth station. The earth stations must be carefully power controlled to prevent the microwave power spilling into the bands for the other channels. Here, all VSATs share the satellite resource on the frequency domain only. 3 Types:
PAMA (Pre Assigned Multiple Access) DAMA (Demand Assigned Multiple Access) CDMA (Code Division Multiple Access) PAMA (Pre-Assigned Multiple Access)
The VSATs are pre-allocated a designated frequency. Equivalent of the terrestrial (Land Based) Leased line solutions. PAMA solutions use the satellite resources constantly. Therefore, no callup delays in the interactive data applications or high traffic volumes. PAMA connects high data traffic sites within an organization DAMA (Demand Assigned Multiple Access) The network uses a pool of satellite channels, which are available for use by any station in that network. On demand, a pair of available channels is assigned, so that a call can be established. Once the call is completed, the channels are returned to the pool for an assignment to another call. Since the satellite resource is used only in proportion to the active circuits and their holding times, this is ideally suited for voice traffic and data traffic in batch mode. DAMA offers point-to-point voice, fax, and data requirements and supports video-conferencing. Satellite connections are established and dropped only when traffic demands them. CDMA (Code Division Multiple Access): Under this, a central network monitoring system allocates a unique code to each of the VSATs. Enabling multiple VSATs to transmit simultaneously and share a common frequency band. The data signal is combined with a high bit rate code signal which is independent of the data, Reception at the end of the link is accomplished by mixing the incoming composite data/code signal with a locally generated and correctly synchronized replica of the code. Since this network requires that the central network management system co-ordinates code management and clock synchronization of all remote VSATs, STAR topology is the best one. Mainly used for interference rejection or for security reasons in military systems.
VSAT Characteristics and Advantages: Reliability: Reliable satellite transmission of data, voice and video between an unlimited number of geographically dispersed sites or from these sites to headquarters.
Flexibility:
The VSAT networks offer enormous expansion capabilities; On the other hand, VSATs offer unrestricted and unlimited reach. Additional VSATs can be rapidly installed to support the network expansion to any site, no matter however remote.
Network Management:
Network Monitoring and control of the entire VSAT network is much simpler than a network of leased lines, easily integrates end-to-end monitoring and configuration control of all network subsystems. A low mean-time to repair: Few hours, compared to leased lines which extend up to a few days. Essentially, lesser elements imply lower MTTR. Up time of up to 99.5 % is achievable on a VSAT network. This is significantly higher than the typical leased line uptime of approximately 80-85%. Cost: VSAT network offers significant savings over 2-3 years timeframe. The service charged depends on the bandwidth which is allocated to the network in the line with customer requirements. Link Budgets: RF equipment would cater to the requirements of the network topology and satellite modems in use. The link budget estimates the ground station and satellite EIRP (Effective Isotropic Radiated Power) required. VSAT Services Interactive real time application: oPoint of sale/retail/banking (eg. ATM) oCorporate data Telephony oRural: individual subscriber oCorporate Telephony Intranet, Internet and IP infrastructure oMultimedia delivery (eg. Video streaming) oInteractive Distant Learning/ Training Direct-to-Home oBroadband internet access for consumers and businesses
Opportunities in VSAT Technology: Voice over IP (VoIP) via satellite Frame Relay via Satellite ATM via Satellite Video-on-Demand via satellite Multimedia Application oInternet/e-mail connection o Te le me d ic i ne o Distance Learning
LAN/WAN:
A computer network that spans a relatively small area is called LAN. Most LANs are confined to a single building or a group of buildings. However one LAN can be connected to other LANs over any distance via telephone lines and radio waves. A system of LANs connected in this way is called a WideArea- Network (WAN). Most LANs are connected workstations and personal computers. Each node (individual computer) in a LAN has its own CPU with which it executes programs, but it is also able to access data and devices anywhere on LAN. This means that many users can share expensive devices such as Laser Printers, as well as data. Users can also use the LAN to communicate with each other, by sending emails or engaging in chat sessions.
Leased Circuits:
A leased circuit is a dedicated link provided between two fixed locations for the exclusive use of the customer. A Leased circuit may be speech may be speech circuit, a data circuit or telegraph circuit. Leased Line charges are uniform in all cases and are same as applicable to point to point leased circuit. In addition to above installation charges are also leviable. Minimum hiring period for all regular leased circuit is one year. Leased Line Circuit
E-mail:
Shorter for electronic mail, the transmission of messages over communication networks is called e-mail. The message can be notes entered from the keyboard or the electronic files stored on the disk. Most mainframes, minicomputers, and computer network have an e-mail system. Some email systems are confined to single computer systems or network, but others have gateways to other computer systems, enabling the users to send electronic mails anywhere in the world.
Companies that are fully computerized make extensive use of e-mail because it is fast, flexible and reliable.
Proxy Server:
A server that sits between a client application, such as web browser, and a real server is called Proxy Server. It intercepts all real requests to the real server to see if it can fulfill the requests itself. If not, it forwards the request to the real server.
Proxy Server
Hubs:
A common connection point for the devices in a network is called hub. Hubs are commonly used to connect the segment of LAN. A hub contains multiple ports. When a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all the packets. A passive hub serves simply acts as a conduit for the data, enabling it to go from one device (or segment) to another. So called intelligent hubs include additional features that enables an administrator to monitor the traffic passing through the hub and to configure each port in the hub. Intelligent hubs are also called manageable hubs. A third type of hub, called a switching hub, actually reads the destination address of each packet and then forwards the packet to the correct port. A Diagram showing Hub connecting nodes
Switches:
In networks, a device that filters and forwards packets between LAN segments is known as switch. Switches operate at the data link layer (Layer 2) and sometimes the network layer (Layer 3) of the OSI Reference Model and therefore supports any packet protocol. LANs that use switches to join segments are called switched LANs or incase of Ethernet networks, Switched Ethernet LANs.