Escolar Documentos
Profissional Documentos
Cultura Documentos
2.12 Blue Defocus adjustment (6) BLUE defocus ADJ. should be finished.
(7) The vertical incident illumination on the screen
Adjustment Preparation
should be 20 Lux. or less.
(1) Optical and electrical focus adjustment should
have been completed.
(8) Picture Format is 16:9 Standard Mode.
(2) The convergence adjustment should have been
(9) Go into I2C service mode.
completed.
Table 1: White Balance Adjustment Signal
(3) Set Video conditions to factory preset.
(4) Input the cross-hatch signal. Screen Size 51”, 57” and 65”
High light [IRE] 100
Adjustment procedure
[Vpp] 0.715
(1) Turn the B Focus VR (Focus Pack) fully
Low light [IRE] 25.0
clockwise.
[Vpp] 0.175
(2) Adjust sticking out level of blue to specification
shown in table below, by turning the (B) FOCUS Table 1 shows amplitude of White raster (without sync,
VR counter clockwise. termination impedence: 75ohm).
20
BACK TO ADJUSTMENTS