Escolar Documentos
Profissional Documentos
Cultura Documentos
, TDA7499
6 + 6W STEREO AMPLIFIER WITH MUTE AND STAND-BY
DESCRIPTION
The UTC TDA7499 is class AB dual Audio Power Amplifier and designed for high quality sound application as Hi-Fi music centers and stereo TV sets.
FEATURES
* Wide supply voltage range up to 18V * 6 + 6W @ THD =10%, RL = 8, VS = +14V * No POP at Turn-On/Off * MUTE (POP free) * STAND-BY feature (Low Iq) * Short circuit protection to GND * Thermal overload protection
HZIP-11
ORDERING INFORMATION Ordering Number Normal Lead Free Plating TDA7499-J11-T TDA7499L-J11-T Package HZIP-11 Packing Tube
PIN CONFIGURATION
IN+(1) IN-(1) GND IN-(2) IN+(2) -VS MUTE/STAND-BY(ST-BY) OUTPUT(2) +VS OUTPUT(1) -VS
1
QW-R107-032,A
TDA7499
ABSOLUTE MAXIMUM RATINGS
PARAMETER DC Supply Voltage Output Peak current (internally limited) Power Dissipation Tc=70 Operating Temperature Junction Temperature Storage Temperature SYMBOL Vs Io PD TOPR TJ TSTG
THERMAL DATA
PARAMETER Thermal Resistance Junction-Case Thermal Resistance Junction-Ambient SYMBOL JC JA RATINGS 2.8 35 UNIT /W /W
ELECTRICAL CHARACTERISTICS
(Refer to the test circuit, Vs=14V, Rs=50, Gv=30dB, f=1KHz, Ta=25, unless otherwise specified.) PARAMETER Supply Range Input Offset Voltage Total Input Noise Total Quiescent Current Output Bias Current Input Resistance SYMBOL Vs Vos eN IQ IB Ri THD=10% RL=8 RL=4, Vs11V THD=1% RL=8 RL=4, Vs11V RL=8, Po=1W, f=1KHz RL=8, Po=0.1~ 5W, Vs13V f=100Hz ~ 15KHz RL=4, Po=1W, f=1KHz RL=4, Po=0.1~ 4W, Vs10V f=100Hz ~ 15KHz f=1KHz f=10KHz A Curve f=20Hz ~ 22KHz TEST CONDITIONS RL=8 RL=4 MIN 5 5 -25 TYP MAX 18 13.5 +25 8 90 UNIT V mV V mA nA K W
15 8
Output Power
Po
W % 0.5 % % 1 % dB dB dB V/s
THD
Cross Talk
CT
50
Open Loop Voltage Gain GOL Supply Voltage Rejection SVR fr=100Hz, Vr=0.5V (each channel) Slew Rate SR Thermal Shut-down TJ Junction Temperature MUTE FUNCTION (ref: +Vs) Mute/Play Threshold VTMUTE Mute Attenuation AM STAND BY FUNCTION (ref: +Vs) (only For Split Supply) Stand-by/Mute Threshold VTST-BY Quiescent Current @ Stand-by IQ ST-BT Stand-by Attenuation AST-BY
70 60 80 60
6.5
10 145
-7 60 -3.5
-6 70 -2.5 3 110
-5
V dB V mA dB 2
-0.5 6
QW-R107-032,A
TDA7499
MUTE/STAND-BY FUNCTION
MUTE/STAND-BY function is assembled at pin 5 and to control the amplifier status by two different thresholds, referred to +VS. -When Vpin5 higher than = +VS - 2.5V the amplifier is in Stand-by mode and the final stage generators are off -When Vpin5 is between +VS - 2.5V and +VS - 6V the final stage current generators are switched on and the amplifier is in mute mode -When Vpin5 is lower than +VS - 6V the amplifier is play mode.
15K
1F
3 4 OUT (L) 8 18K IN- (L) 4.7 100nF 560 10 IN- (R) 560 18K RL (L)
1F
15K +5V P
18K GND 9
1F
IN (R)
11
1000F
C6 0.1F C9 470F
Q1 BSX33 R2 15K
C2 100F
OUT (L)
OUT (R)
3
QW-R107-032,A
TDA7499
+Vs
R2
C3
5 7
+ -
+Vs 3 4 8
C4
C5
R1 SW1 DZ R4 SW2 R3
C1
GND
9 10
IN- (R) R8
R9
C2
IN (R) 11
2 1 C7 6 -Vs C6
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
4
QW-R107-032,A