Escolar Documentos
Profissional Documentos
Cultura Documentos
INSTRUCTION SHEET
Odyssey DR/2500 Illuminator Module Replacement
T10 L-Key
Push Down
Torx Screws (3 places)
1
Odyssey DR/2500 Illuminator Module Replacement, continued
Note: Do not touch the 4. Insert the new illuminator module from the bottom of the instrument. Make
three optical surfaces of sure the connector pins on the module line up with the connector inside the
the illuminator module! Odyssey. Do not force the module into place. Secure the module with the
(See Figure 2.)
three Torx screws (Figure 1).
2
3 Optical Surfaces (3 places)
Connector Pins
5. Return the instrument to the upright position and restore power and other
cable connections. No calibration is necessary for the illuminator module.
Components
Description Cat. No.
Illuminator Module Replacement................................................................................................................ 59059-00
Instruction Sheet ............................................................................................................................................. 59059-88
T10 L-Key......................................................................................................................................................... 59117-00
Torx Screws...................................................................................................................................................... 49440-00
© Hach Company, 2001. All rights reserved. Printed in the U.S.A. te/dk 06/01 1 ed