Você está na página 1de 562

Select most suitable product for easy operation.

The CAD data can be downloaded for the homepage:

http://www.nissei-gtr.co.jp/

The specifications of the products in this catalogue are subject to change by modification or other reasons without notice, therefore, we recommend you to contact us for confirmation, before start designing. In case the end-user of products is military organization or the purpose of products is for manufacturing weapons, or the country you export products is the restricted country stipulated in the "Foreign Exchange and Foreign Trade Law", execute prior investigations and take proper measures for export.

Honbu Sales Office 1-1 Inoue, Izumi-cho, Anjo-shi, Aichi 444-1297 Japan TEL:+81-566-92-7410FAX:+81-566-92-7418

Osaka Branch Office 1-18 Ikutamamaemachi, Tennoji-ku, Osaka 543-0072 Japan TEL:+81-6-6772-1900FAX:+81-6-6772-0406

Tokyo Branch Office2-8-9 Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032 Japan TEL:+81-3-3865-7681FAX:+81-3-5820-7693

Sales, Overseas Division1-1 Inoue, Izumi-cho, Anjo-shi, Aichi 444-1297 Japan


Main switchboard FAX:+81-566-92-7002 TEL:+81-566-92-5312

http://www.nissei-gtr.co.jp

For orders and/or inquiries about products in this catalogue, please contact the dealer mentioned below:

Printed in November, 2008


2008.11.2/6-2

Precautions for Safety


General
Be sure to observe the safety regulations for the installation location and the equipments to be used with. (Ordinance on Labor Safety and hygiene, Electrical Equipment Technical Standard, Internal Line Regulations, Factory's Guide for Protecting Explosion, Building Standard Law, etc.) Carefully read the Instruction Manual before actual operation of products and operate properly as instructed. When the Instruction Manual is not available in your place, ask your dealer or our nearest sales office. The Instruction Manual should be reached to the end-user who actually operates the product.

Particular user
Select the most adequate products for your using conditions and/or purposes. (For selection of products, be sure to carefully read the Technical InformationandPrecautions for Use ) If the product is applied as a hoist or elevator for human transport, be sure to furnish it with a protective device such as safeguard. Be sure to use explosion-proof motor in the circumstances where explosive gases or flammable gases exist. The explosion-proof motor should have specifications most adequate for the facing danger. If a inverter is employed for driving an explosion-proof motor, the approved combination is 1:1 between motor and inverter. Be sure to operate motor with the designated inverter. The inverter itself is not explosion-proof specifications, therefore, be sure to install it in the location where no explosive gases exist. If a 400V class inverter is employed for driving motor, be sure to attach a control filter or a reactor to the inverter, or use insulation enhanced motor. In the equipment such as food machines, especially machines which do not accept oil or grease, be sure to furnished with protective devices such as oil pan, etc., to protect from the oil leakage due to failure or life.

Note:
The specifications of the products in this catalogue are subject to change by modification or other reasons without notice, therefore, we recommend you to contact us for confirmation, before start designing.

Select the most adequate products for your using conditions and/or purposes.

Page layout of the catalogue for the gear motor mini series (6W-90W).
Layout done for better understanding and easier searching.
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

25W

T25

200/200/220

50/60/60

12 15

0.21/0.19/0.19 0.18/0.17/0.17

1350/1550/1600 1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 12 3-phase 25W 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240

The specifications of the motor are shown in the Performance Table. And the Performance Table is devided according to the motor capacity, showing the respective dimension diagram together

P.A86 P.A87 P.A87 P.A87 Fig.A-242 Fig.A-244 Fig.A-246 Fig.A-248 2kg 2kg 2kg 2kg

P.A86 P.A87 P.A87 P.A87 Fig.A-243 Fig.A-245 Fig.A-247 Fig.A-249 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A83.

Foot Mount Type Gearmotor


Fig.A-242
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 22 20 12h6 76 11 4 82 7 55 9.5 35 50 35 4-6.5 76 90 7.5 40 56 41 4-6.5 90 104 22

GLW-12-5120-T25

Fig.A-243
Cab tyre cable 7.6 2000mm

GLW-15-160240-T25

186.5 153.5 34

33 27 24 15h6

46 17 5 8 65 97 117.5

13.5 103 90 13

The product dimensions are described by 3-angle diagram. And easy-to-find file numbers in accordance with the respective type are realized.

Round Weight 2kg

CAD Data GLW-12-T25

Round Weight 3kg

CAD Data GLW-15-T25

Added indexes for product type designations, price list, option, etc. for easy findings.
A86
Model Code P.A80
Cab tyre cable Position Mark

P.E54

Option P.E110

Data for the outer dimension diagram of products:


All the data for the outer dimension diagram can be downloaded from the Nissei homepage shown below:

http://www.nissei-gtr.co.jp/
Nessei Corp. Home Page.

Mini Series Type


Concentric Hollow Shaft Concentric Solid Shaft

F2
X

Gearmotor

F2 type speed control gearmotor debut with its excellent features


No restinction of mounting direction
Available in double flange mounted type with left light symnetrical concentry design so that motor does not Produce from flange surfacesymnetrical around center of motor : X=X1,Y=Y1 Face mount flange . with tappedholes.
Y

X1

Y1

Light weight Compact


Lightweight, slim design compact. 1746% lower volume and 2139 lower weight.
results of comparison to competing models as of March 2006.

Capacity15W90W Reduction

Ratio1101240

Features and Characteristics


Speed control gearmotor which enables to select speed freely in the wide range of speed, 501400rpm(50Hz) or 50 1700rpm(60Hz) through the exclusive speed controller, by attaching the Rate Generator(AC generator) for speed detection to the motor part of gearmotor.
Torque Limit line for use (Critical area for motor temperature rise in the continuous operation.)

This indicates the variation of rotation speed according to the load variation when set to N rotation at no load condition. (Load variability rate is about 3%.)

Characteristics
1 Wide speed range
With Nissei's exclusive circuit design, continuous acceleration from the low speed 50rpm, can be obtained.
Power source frequency 50Hz 60Hz Speed range 501400rpm 501700rpm

100%

2 Excellent output characteristics


Secured high allowable load torque value at low revolution range, and also secured wide range of high revolution as seen in the diagram on the right. 3 Wide variety of model There are roughly 8 types available according to the purpose, that is, 2 types (100V, 200V) in U-Type connectable by lead wire with connector, and 6 types (100V, 200V) in P-Type which is plug-in type.

Range of possible continuous operation

50rpm

Rotation speed High speed rotation range rpm

In the speed control gearmotor, same rotation speed can be obtained even in the defferent power source frequency. For example, the rotation speed set up at the 50Hz area, will never vary and the same rotation speed can be obtained in the 60Hz area. (Within the range of the highest rotation speed of 1400rpm and less.)

Select most suitable product for easy operation.

6W-90W

2008-2009

The CAD data can be downloaded for the homepage:

http://www.nissei-gtr.co.jp/

CONTENTS
Gearmotor

Introduction of the Product Series (Products shown in this cataloge)


Gearmotor with Brake Water-Resistant Gearmotor

GTR

Mini Series
Type Parallel Shaft
P.A5 P.A5 P.A79

Capacity 3-Phase 15W90W 1-Phase 15W90W Reduction Ratio 1/51/1800

GT

Type Parallel Shaft

Capacity 3-Phase 15W60W 1-Phase 15W60W Reduction Ratio 1/51/200

Gearmotors with the compatible with the


P.A147 P.A147

Type Right Angle Shaft

Capacity 3-Phase 15W90W 1-Phase 15W90W Reduction Ratio 1/101/1800

P.B5

P.B5

P.B59

F2

Type Concentric Hollow Shaft F2S

Capacity 3-Phase 15W90W 1-Phase 15W90W Reduction Ratio 1/101/240

P.C5

P.C5

P.C69

F2

Type Concentric Solid Shaft F2F

Capacity 3-Phase 15W90W 1-Phase 15W90W Reduction Ratio 1/101/240

P.C39

P.C39

GTR-

L Series
Type Parallel Shaft
P.D5 P.D5

G
4

Selectable from bearing

Capacity 3-Phase 15W40W 1-Phase 6W40W Reduction Ratio 1/31/360

Gearmotor
Water-Resistant Gearmotor with Brake Speed Control Gearmotor Speed Control Gearmotor with Brake Gearmotor with Clutch and Brake

P.A79

P.A107

P.A131

output shaft/flange mounting dimension products of other domestic Japanese manufacturers.

P.B59

P.B85

P.C69

P.C95

P.C111

Reversible Gearmotor

metal type to bearing type.

P.D33

P.D33

P.D19

Technical Information
Selection

CONTENTS
E2 E2 E6 E6 E7 E8 E10 E12 E13 E14 E14 E16 E18 E19 E20 E20 E21 E22 E24 E26

E2

Process of selection and example of selection Service Factor(correction of load torque) Allowable inertia moment(GD2) and correction coefficient Calculation Method for inertia moment(GD2) Calculation of Overhung Load O.H.L

Braking time and lifetime frequency of Gearmotor with Brake and with Clutch/Brake Construction Drawings How to read the nameplate/manufacturing number. Motor characteristics
G-Type Indoor specifications H-Type Indoor specifications F2-Type F2S Indoor specifications F2-Type F2F Indoor specifications G-Type Water-Resistant specifications H-Type Water-Resistant specifications F2-Type F2S Water-Resistant specifications GTR-L Series Indoor specifications

Torque rotation speed characteristics Inertia moment (product itself)

Gearmotor Indoor specifications

E30

Motor Wiring Terminal Box With simplified break/ Reversible gearmotor

Gearmotor with Brake (Indoor)


Brake specifications Brake Structure Brake Wiring Rectifier Terminal Box Terminal Box with a built in rectifier

GearmotorGearmotor with Brake Water-Resistant specifications


Feature Lead wire and wiring Brake spacifications Brake structure Brake wiring

Necessary space for taking off the Motor Fan Cover/Brake Cover.

E30 E30 E31 E32 E34 E34 E34 E36 E38 E40 E41 E44 E44 E44 E44 E45 E46 E48

Terminal Box

E50 E56

Installation dimension for T-type terminal box Installation dimension for K-type terminal box Installation dimension for C-type terminal box Installation position changing

E50 E50 E51 E52 E54

Speed control gearmotors


Features and characteristics Terminal Box

Speed control brake motors(GTR-L Series only)


Brake characteristics Brake structure Terminal Box

Speed control gearmotors Controller


Specifications Types U-Type controller P-Type controller P-Type controller Standard Accessories Wiring of P-Type controller (with motor) Wiring of P-Type controller (with brake motor, GTR-L Series only) Causions on wiring

E56 E56 E56 E57 E57 E57 E58 E60 E60 E61 E61 E62 E63 E64 E68 E72

E74 E76 E78 E80

Gearmotor with Clutch/Brake


Feature Clutch/Brake Specifications Clutch/Brake Structure Clutch/Brake Wiring

E74 E74 E74 E74 E75

Combination of Gearmotor and Inverter Lead Wire Specifications

E76 E77

Detailed Dimension Diagram of Output Shaft


Solid Shaft G-Type H-Type F2-Type F2F Solid Shaft GTR-L Series Hollow Shaft F2-Type F2S

E78 E78 E78 E79

Attachment of Hollow Shaft Type


Attachment and Detachment Attaching Torque Arm (option) Designing of Torque Arm Detailed dimensions of hollow shaft protecting cap

E80 E80 E84 E85 E86

Standard Motor

E88

UL Standard CE Marking China CCC Certificate Standard motor model lineup G-Type Standard motor model lineup H-Type Standard motor model lineup F2-Type F2S Standard motor model lineup F2-Type F2F Standard motor characteristics G-Type Standard motor characteristics H-Type Standard motor characteristics F2-Type F2S Standard motor characteristics F2-Type F2F

E88 E88 E90 E92 E98 E99 E100 E101 E102 E104 E106 E107

E108

Caution for Safe Operation Option


Tapped Output Shaft Surge Suppressor for Brake Wiring Torque Arm Optional parts exclusively for Speed control gearmotors

E108 E110 E110 E110 E111 E111

Features
1
A variety of models and quick delivery
With our specific production system, we, Nissei Corporation are ready to correspond to customers requirements through our variety of models and quick delivery system. Series/Type Model Gearmotor Reversible Gearmotor Brake Motor Water-Resistant Gearmotor Water-Resistant Brake Motor Speed Control Gearmotor Speed Control Brake Motor Gearmotor with Clutch/Brake GTR Mini Series G/H Type GT Type F2 Type GTR-L Series G-Type

Capacity/Reduction Ratio
Series/Type and Mount Type Capacity
Frame Number Reduction Ratio

Foot Mount Flange Mount Flange Mount Hollow Shaft Solid Shaft Foot Mount Flange Mount

Foot Mount 1590W 1240 1/5 1/1800 G-Type Flange Mount 1590W 1240 1/5 1/1800
Flange Mount (Small Flange)

GTR-L Series

1590W 2232 1/3001/1800

GTR GT-Type Flange Mount 1560W 815 1/5 1/200 Mini Foot Mount 1590W 1540 1/101/1800 Series H-Type Flange Mount 1590W 1522 1/101/1800 Hollow Shaft 1590W 1215 1/101/240 F2-Type Solid Shaft Foot Mount G-Type Flange Mount 1590W 1518 1/101/240 640W 1015 1/3 1/360 640W 1015 1/3 1/360

The corresponding models for GTR Mini Series, G-Type with the Note 1 small flange mount type are gearmotors, brake motors and speed control gearmotors only. The flange mount types of GTR Mini-Series,H-Type are up to the 2 frame number 22.
Torque N m 700

Allowable torque by the reduction ratio

High torque can be obtained according to the reduction ratio. Select the most suitable gearmotor by the torque standard required. (For more details, refer to the performance table.)
90W

600

500

400
Torque N m

50 60W 90W 30 60W 40W 10 0 25W 15W 1/5 1/30 1/60 1/120 1/160 1/240 1/450 1/900 25W 15W Reduction ratio 1/1800 100 40W 200 300

High efficiency/Low noise

Maintenance free, Direction-Free Mounting.

The built-in gears are made of special alloy steels, machined in high precision process and carburized in heat treatment. (Some models in the GTR-L Series are not hardened by carburizing.) Especially, the high ratio Hypoid gears which are employed on the Right Angle Shaft Types(H F2 Types), secured high efficiency, low noise and long life by doing the CBN grindings after heat treatments, taking off the strains by the heat treatment.

All the models are filled with high-grade grease in our factory before shipment, no maintenance is required and can be mounted in any directions.

GTR Mini Series Water-resistant gearmotor

Gearmotors comforming to IP65 of IEC Standard.


Suitable for the circumstances where water fly and/or periodical cleaning by water is being done. "IP65" stand for the grade of dust-tight and water-tight. The first digit "6" indicates "Perfect dust-tight structure" and the second digit "5" indicates "Protection from water jet in all direction".
Note) Uses in water or under high-hydrostatic pressure are not permitted.

Dust-Tight

Dripping Water-Tight
Original water-resistant/ dust-tight fabrication. (Disassembling not permissible.)

Jet Water-Tight

Select from our wide variation of models.


Cabtyre cable outlet. Position can be changed. (Position not modifiable by customer due to its construction.)

Stainless steel output shaft (SUS420J2)

Motor Capacity: 15W90W Series: GTR Mini Sereis G-Type (Parallel Shaft) H-Type (Right Angle Shaft) F2-Type (Hollow Shaft) Models: Gearmotors, Brake Motors

Oil seal with dust lip is adopted. Jointed parts are sealed with O-rings.

Low-temperature-rise safety brake (Off brake) Stainless steel external screws

MIDI SERIES/Water-resistant/ Outdoor Gearmotors are also available.


0.1kW2.2kW (0.1kW0.75kW for Brake Motor) For more details, refer to our MIDI SERIES catalogues.

GT-Type Gearmotor

Gearmotors with the flange mounting dimension compatible with the products of other domestic Japanese manufacturers The dimensions marked with are the ones compatible to other manufacturer.

Others
GTR Mini Series GTR-L Series Aluminium die-cast Aluminium die-cast Grey (Mansel value: 9B6/0.5) New JIS 1301-1976(Standard)

Casing

Pinting color External shaft key dimension

CAD DataDimension Diagram(PDF)

The most up-to-date CAD data/dimension diagrams can be downloaded from Nissei homepage. Data available
DXF Data ( Shown by 3-angle diagram. Some models are shown by 2-angle diagram.) 3D CAD data (GTR series 0.1kW to 2.2kW) Data for MICRO CADAM(DOS File Type) Dimension Diagram(PDF)

Products Shown
GTR Series KOMPASS GT-STEP GTR-II Series GTR-A Series GTR-AR Series Others Standard Models Standard Models Standard Models Standard Models Standard Models Standard Models Standard Models

With the high percentage in-house production, we correspond to various needs of our customers.
Correspond to Double Voltage (400V class)
3 phase 380V/50Hz 400V/50 60Hz 440V/60Hz 1 phase 200V/50 60Hz Ship out : Only 3 days after confirming order

Correspond to Various Voltages


Correspond to 200V Standard Voltage and other voltages/frequencies other than the double voltage stated above. Ship out : Only 10 days after confirming order

Correspond to Overseas Standards


UL-standard CE-marking CCC-certification Ship out : Only 5 days after confirming order For Various Voltages Ship out : Only 10 days after confirming order

F-Type Insulation/Treatment for passing through tropics


Modification of F-Type Insulation 15W90W Ship out : Only 10 days after confirming order Treatment for passing through tropics Ship out : Only 5 days after confirming order For Various Voltages/Overseas Standard Ship out : Only 10 days after confirming order

Thermal Protector
Signal Fetch Type Ship out : Only 5 days after confirming order For more details, refer to Page E24.

10

Gearmotor Following requests are also welcome:


Products of special reduction ratio
Output Shaft Tapped (Screw) finishing

Cutting of the casing

Output Shaft extension and cutting

Output Shaft special shaping

Ship out : Only 3 days after confirming order


In case of our standard Tapped finishing G-Type H-TypeL-Shaft/R-Shaft For more details, refer to P. E10.

Perfect Custom-made Specifications


Original Gearmotor can also be designed and manufactured by us. Casing originally designed for reducer Originally designed motor

11

We, Leader of the Industry, oer quick products of more than 140,000 models receiving order.
Product Value
Pursuing integrated value and anity Conform to International Standards Improvement of painting quality RoHS Support

Anjo Minami Plant Expansion

From one piece is Nissei's motto, caring customer satisfaction.


No. 2 Plant: New Facilities

Providing Information
Factory Tour Lecture about Products

In-house Production
Over 90% of the products are in-house production(Reducer products). Providing reducers and gear products to OEM Integrated Production from mold designing/manufacturing, die-casting,

mold designing/manufacturing

Motor production line

Factory tour/informational sessions

die-cast products

heat treatment (gas carburizing equipment)

12

OEM gear products

Ship out of standard within 3 days after


Corporate Prole
Company Name: Nissei Corporation Capital: 3,475 Million Yen Employees: 732 Headquarters: Anjo-shi, Aichi Manufacturing Plant: Main Plant, Anjo Minami Manufacturing Plant Stock Exchange: Listed on the Second Section of the Tokyo Stock Exchange Listed on the Second Section of the Nagoya Stock Exchange Main Products: Reducers, Variable-Speed Reducers, Direct Drive Equipments (Electric Slide-Base, Cylinder, etc.)550,000units/year Various Small gears (Standard gears, Make-to-order gears)18 Million units/year

Quality
Obtain ISO 9001 Obtain ISO 14001 Awards for 99TPM Certied as 2005 Aichi Quality Company

Company History
March 1942 Established company JAPAN SEWING MACHINE NEEDLE MANUFACTURING LTD in Nagoya. June 1955 Started production of small ne pitch gears in a make-to-order base in domestic Japanese market. May 1964 Anjo Manufacturing Plant newly opened in 1-1, Inoue, Izumi-cho, Anjo-shi, Aichi and started operation. (Headquarters and Main Manufacturing Plant at present) July 1965 Changed company name to NISSEI INDUSTRY CO.LTD May 1969 Started production and sales of power transmissions such as reducers, gear boxes, clutches, brake units, etc. Oct. 1974 Started production of spur gear reducers GTR Gearmotor. May 1980 Started production and sales of GTR H-Type orthogonal shaft reducers (Hypoid Gearmotor) Nov. 1984 Started production and sales of GTR Mini Gearmotors(15W 90W) July 1985 Listed on the Second Section of the Nagoya Stock Exchange. Capital became 3,475 Million Yen Sept. 1985 Opened Anjo Minami Manufacturing Plant, as a plant exclusively produce power transmissions. 1989 Started sales of Stock Bevel Gear and HRH (High Ratio Hypoid Gearmotor). May 1992 Added Helical Gear and Straight Bevel Gear to our standard production line and started sales with the name of My Set. May 1992 Started production and sales of GTR-V Series (Variable-speed gearmotor). March 1995 Started production and sales of GTR IIS Series (Power Slide Base) and C-Series(Power Cylinder). April 1998 Started production and sales of GTR-F2 Series (Concentric hollow and solid shaft). Nov. 1998 Agreed sales cooperation with SEW-EURODRIVE, JAPAN, Inc. Oct. 1999 Awarded 99TPM. March 2000 Obtained ISO 9001 Certication. Oct. 2000 Changed company name to Nissei Corporation. Dec. 2000 Obtained ISO 14001 Certication. Sept. 2001 Started sales of Small multipurpose inverters(0.1kW 3.7kW). Oct. 2001 Expanded Anjo Minami Manufacturing Plant. (CEL Line assembly started.) April 2002 Started production and sales of GTR A-Series(Low Backlash Reducers). April 2002 Agreed sales cooperation with KOHARA GEAR INDUSTRY CO.LTD Sept. 2002 Started production and sales of GTRII V-Series, battery power type. March 2003 Listed on the Second Section of the Tokyo Stock Exchange. Aug. 2003 Agreed sales cooperation with DAIKIN INDUSTRIES. LTD Oct. 2003 Started production and sales of GTR Medium Type, Water-resistant Gearmotor with Brake. Dec. 2003 Shipping system for urgent requests Scramble Shipment Service started. Dec. 2003 Started production and sales of GTR A-Series IPM servomotor attached. Jan. 2004 Started production and sales of GTR A-Series Parallel Shaft(AG3). Feb. 2004 Started production and sales of GTR Medium Type Explosion-proof Gearmotors. April 2004 Agreed sales cooperation with SEW-EURODRIVE(TIANJIN) CO.,LTD. June 2004 Started production and sales of GTRII V-Series Battery Power Type with the specications of 400W/48V). Dec. 2004 Started production and sales of Bevel GearboxKOMPASS Jan. 2006 Certicated to Aichi Quality brand. July 2006 Started production and sale of concentric hollow shaft and concentric solid shaft in GTR-F3 Series. Jan. 2007 Started production and sale of concentric hollow shaft and concentric solid shaft in GTR-A Series, AF3 type. Started production and sale of IS gearmotor. April 2007 Established manufacturing Plant No.2 for reducers. Sept. 2007 Started production and sales of GTR-AR APQ type Jan. 2008 Started production and sales of GTR-AR Accurate

Obtain ISO 9001

Obtain ISO 14001

Certied as 2005 Aichi Quality Company

Awards for 99TPM

Product Development Capability


Gear designing and manufacturing technology cultivated more than half Century, represented by HRH (High Ratio Hypoid Gear). Development of new transmission equipments, corresponding to the market needs.

CBN Bevel Gear Grinder (self-developed product)

Gleason PHOENIX II 275HC

HRH High Ratio Hypoid Gear

Spiral Bevel Gear

Helical Gear

brushless DC gearmotor. Reducer AGC/AFC type.

13

Parallel Shaft

Gearmotor

G-Type Gearmotor
Model and Type Designation Standard Model Lineup

G
Type
Parallel Shaft

Gearmotor/Gearmotor with Brake Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Water-Resistant (IP65) Gearmotor/Gearmotor with Brake Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Speed Control Gearmotor Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram Gearmotor with Clutch and Brake Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram GT-Type Gearmotor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram P. A147 P. A151 P. A157 P. A131 P. A135 P. A141 P. A107 P. A111 P. A79 P. A83 P. A97 P. P. A5 A9

P. A45

A1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity

G-TypeParallel Shaft

G-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

G G

L M F MN

12 40

50 1500

G GT L F

T25 S90 W C

T6

Series Name

: G-Type Parallel Shaft : GT-Type Parallel Shaft : Foot Mount : Flange Mount : Small Flange Mount Frame No.2232 : Flange Dimension80 GT-Type only : Flange Dimension90 GT-Type only : With Motor : With Brake Motor : With Brake Motor GT-Type only : With Water-resistant Motor : With Clutch/Brake : With Speed Control Gearmotor U-Type With Controller : With Speed Control Gearmotor P-Type Controller Sells Separately Output Shaft material:SUS420J2 Output Shaft material:SUS420J2 : With Water-resistant Brake Motor

Classification by Mount Form

K 8 9 M MN B W V MA U P

Classification by Motor Type

Frame No. and Diameter of Output shaft Reduction Ratio

Output Shaft Diameter 5 : 15 1800 : 11800 T15 T25 T40 T60 T90 S15 S25 S40 S60 S90 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W

Motor Designation and Capacity

Option
Note 1: For the types stated below, manufacturing with double voltage is not feasible. Water-resistant motors 3-phase (Single-phase can be acceptable as a special order.) All models with clutch/brake GT-Type 3-phase Note 2: Since the water-resistant motors are specifications with exclusive cab tyre cable, the optional terminal box cannot be attached. Note 3: Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

Blank : Standard Specifications 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase100V50Hz 100V60Hz W : High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase200V50Hz 200V60Hz : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Terminal box for Speed Control type motor Blank : Standard Specs. X : Mark for Additional Specs.

T K C

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Position indicator for lead-wire, terminal box and cab tyre cable Refer to the indication mark list in P. E54 for details.

A2

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A3

Model and Type Designation

A4

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake


ModelType Designation Standard Model Lineup

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start 4 Continuous Rating Helical gear

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Totally Enclosed non-ventilated or Totally Enclosed fan-cooled

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

A5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity

G-TypeParallel Shaft

G-Type gearmotors and gearmotor with brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

G G

L M F MN

12 40

50 1500

G L F K M MN

T25 S90 W C

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: G-Type Parallel Shaft : Foot Mount : Flange Mount : Small Flange Mount Frame No.2232 : With Motor : With Brake Motor

Output Shaft Diameter 5 : 15 1800 : 11800 T15 T25 T40 T60 T90 S15 S25 S40 S60 S90 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz W : High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase 200V50Hz 200V60Hz T K C : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Mark for Additional Specs.

Motor Designation and Capacity

Blank : Standard Specifications

Option

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

A6

Model and Type Designation

Standard Model Lineup


Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/5 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

3-Phase 15W 3-Phase 15W

12

1/40

1/100 1/120

1/160 1/200 1/240 22 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

12 3-Phase 25W 1-Phase 25W 15 22 28 12 15 Gearmotor GLM GFM Note 1 GKM


Frame Number 2232

1/100 1/120

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/80 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

Gearmotor with Brake

1/100 1/120

3-Phase 40W 1-Phase 40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

18 22 28 32
Note 2

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/80 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

Gearmotor with Brake GLMN GFMN Note 1 GKMN


Frame Number 2232

12 15

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

3-Phase 60W 1-Phase 60W

18 22 28 32 15

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

3-Phase 90W 1-Phase 90W

18 28 32 40

1/100 1/120

Speed Control Gearmotor with Brake Technical Information

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800

Standard Motors

Cautions for Safety

Option

Note 1The models GKM/GKMN(small flange mount type) are available in the frame number 22, 28 and 32. (Not available in the frame number 12, 15, 18 and 40.) 2The frame number will be "15" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "15" only. 3 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

A7

A8

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A9

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T15 15W T15W

200/200/220

50/60/60

12 22 12 22

0.14/0.13/0.13 0.14/0.13/0.13 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11

1350/1550/1600 1350/1550/1600 1400/1400/1700/1700 1400/1400/1700/1700 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 3-phase 15W 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m kgf m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98.0 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

N 98 196 245 343 441 490 539 588 637 686 735 735 784 784 784 784 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 80 80 80 180 180 180 180 180 180 180 180 180

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A11 Fig.A-1 2kg

P.A11 Fig.A-3 2kg

P.A12 Fig.A-6 2kg

P.A12 Fig.A-8 2kg

1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 22 1/ 750 1/ 900 1/1200 1/1500 1/1800

P.A11 Fig.A-2 5kg

P.A11 Fig.A-4 5kg

P.A11 Fig.A-5 5kg

P.A12 Fig.A-7 5kg

P.A12 P.A12 Fig.A-9 Fig.A-10 5kg 5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A9.

A10

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR MINI SERIES

Gearmotor
G-TypeParallel Shaft3-Phase 15W
Foot Mount Type Gearmotor
Fig.A-1
300
Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

GLM-12-5240-T15 GLM-12-5240-T15W
162

Fig.A-2

GLM-22-3001800-T15 GLM-22-3001800-T15W
260

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

22 20 300
12h6

40 35
22h6

24.5

Waterresistant Gearmotor with Brake Speed Control Gearmotor

11 76 7 35 50 35

4 82 13.5 55 76

30

6 139 12 90

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

65 90

55

4-11

130 154

Round Weight 2kg

CAD Data GLM-12-T15 GLM-12-T15W

Round Weight 5kg

CAD Data GLM-22-T15 GLM-22-T15W

Flange Mount Type Gearmotor


Fig.A-3
300

With Waterresistant Brake Motor

GFM-12-5240-T15 GFM-12-5240-T15W
162

Fig.A-4

GFM-22-3001800-T15 GFM-22-3001800-T15W
260 40 35

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

22 20
12h6

35

300 21 4 76 13.5 43 76 30 22h6 148h7 6

24.5

11 76

185

82.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

89

3.5 27.5

4-6.5

32 76

32

12

4 47

4-11

164

Round Weight 2kg

GFM-12-T15 CAD Data GFM-12-T15W

Round Weight 5kg

GFM-22-T15 CAD Data GFM-22-T15W

Small Flange Mount Type Gearmotor


Fig.A-5
GKM-22-3001800-T15 GKM-22-3001800-T15W
260 12 300 30 76 24.5 4-8.6 61 140 61

Standard Motors

47 5 40 35 22h6
60h7

Cautions for Safety

Option

42 51 80 89

Round Weight 5kg

GKM-22-T15 CAD Data GKM-22-T15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A11

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-TypeParallel Shaft3-Phase 15W
Foot Mount Type Gearmotor with Brake
Fig.A-6
300
Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

GLMN-12-5240-T15 GLMN-12-5240-T15W
200

Fig.A-7

GLMN-22-3001800-T15 GLMN-22-3001800-T15W
298

22 20 300
12h6

40 35
22h6

24.5

11 80 7 35 50 35

4 84 13.5 55 80

30

6 139 12 90

300

4-6.5

76 90

300

65 90

55

4-11

130 154

Round Weight 2kg

CAD Data GLMN-12-T15 GLMN-12-T15W

Round Weight 5kg

CAD Data GLMN-22-T15 GLMN-22-T15W

Flange Mount Type Gearmotor with Brake


Fig.A-8
GFMN-12-5240-T15 GFMN-12-5240-T15W

Fig.A-9

GFMN-22-3001800-T15 GFMN-22-3001800-T15W
298

200 300

22 20
12h6

35

40 35

300 21 4 76 13.5 43 80 30 22h6 148h7 6

24.5

11 80

185

82.5

89

300

3.5 27.5 4-6.5

32 76

32

300

12

4 47

4-11

164

Round Weight 2kg

GFMN-12-T15 CAD DataGFMN-12-T15W

Round Weight 5kg

GFMN-22-T15 CAD DataGFMN-22-T15W

Small Flange Mount Type Gearmotor with Brake


Fig.A-10
GKMN-22-3001800-T15 GKMN-22-3001800-T15W
298 300 30 80 24.5 300 4-8.6 61 140 61

12

47 5 40 35 22h6 6
60h7

42 51 80 89

Round Weight 5kg

GKMN-22-T15 CAD Data GKMN-22-T15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A12

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A13

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 25W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

12
Standard Voltage (Continuous Rated 4 Poles)

0.21/0.19/0.19 0.18/0.17/0.17 0.21/0.19/0.19 0.18/0.17/0.17 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09

1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1350/1400/1600/1650 1350/1350/15501600 E


Totally Enclosed or Totally Enclosed Fan-cooled

T25 25W

200/200/220

50/60/60

15 22 28 12 15 22 28

Double Voltage (Continuous Rated 4 Poles)

T25W

380/400/400/440 50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 1/ 3-phase 25W 15 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2

N m kgf m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110 180 180 180 180 180 180 280 280 280

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A15 P.A16 Fig.A-11 Fig.A-15 2kg 2kg

P.A18 P.A17 Fig.A-21 Fig.A-25 2kg 2kg

1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 22 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 28 1/1500 1/1800

P.A15 P.A16 Fig.A-12 Fig.A-16 3kg 3kg

P.A18 P.A17 Fig.A-22 Fig.A-26 3kg 3kg

P.A15 P.A16 P.A16 P.A17 P.A18 P.A18 Fig.A-13 Fig.A-17 Fig.A-19 Fig.A-23 Fig.A-27 Fig.A-29 5kg 5kg 5kg 5kg 5kg 5kg

1.5 108 1.2 137 1 167

P.A15 P.A16 P.A16 P.A17 P.A18 P.A18 Fig.A-14 Fig.A-18 Fig.A-20 Fig.A-24 Fig.A-28 Fig.A-30 7kg 7kg 7kg 7kg 7kg 7kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A9.

A14

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR MINI SERIES

Gearmotor
G-Type Parallel Shaft3-Phase 25W
Foot Mount Type Gearmotor
Fig.M-11
GLM-12-5120-T25 GLM-12-5120-T25W
Foot Mount type

Fig.M-12

GLM-15-160240-T25 GLM-15-160240-T25W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

162 300

22 20
12h6

172.5 300

27 24
15h6

Waterresistant Gearmotor with Brake Speed Control Gearmotor

11 76 7 35 50 35

4 82 13.5 55 90

13

5 97 8 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

4-6.5

76 90

40 56

41

4-6.5

90 104

Round Weight 2kg

GLM-12-T25 CAD Data GLM-12-T25W

Round Weight 3kg

GLM-15-T25 CAD Data GLM-15-T25W

Gearmotor with Brake

Fig.M-13

GLM-22-300900-T25 GLM-22-300900-T25W

Fig.M-14
282.5

GLM-28-12001800-T25 GLM-28-12001800-T25W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

260 300

40 35
22h6

24.5 300

45 40
28h6

31

Gearmotor with Brake

30 76 12 65 90 55

6 139 90 90

36.5 8 15 90 125 65 140 175 110 167

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-11

130 154

4-11

Round Weight 5kg

GLM-22-T25 CAD Data GLM-22-T25W

Round Weight 7kg

GLM-28-T25 CAD DataGLM-28-T25W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A15

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 25W
Flange Mount Type Gearmotor
Fig.A-15
GFM-12-5120-T25 GFM-12-5120-T25W
Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-16

GFM-15-160240-T25 GFM-15-160240-T25W

162 300

22 20
12h6

300
35

172.5

27 24
15h6

40

11 76

21 4 76 13.5 43 90

13

5 17

25 51 90

3.5 27.5

4-6.5

32 76

32

4 33

4-6.5

38 90

38

Round Weight 2kg

GFM-12-T25 CAD Data GFM-12-T25W

Round Weight 3kg

GFM-15-T25 CAD Data GFM-15-T25W

Fig.A-17

GFM-22-300900-T25 GFM-22-300900-T25W
260

Fig.A-18

GFM-28-12001800-T25 GFM-28-12001800-T25W

40 35 300

282.5

45 40

300 30 76 22h6 148h7 6

24.5

185

82.5 36.5 89 90

170h7 28h6

31 8

215

93

105.5 4-11

12

4 47

4-11

164

15

4 50

186

Round Weight 5kg

CAD DataGFM-22-T25 GFM-22-T25W

Round Weight 7kg

CAD Data GFM-28-T25 GFM-28-T25W

Small Flange Mount Type Gearmotor


Fig.A-19
GKM-22-300900-T25 GKM-22-300900-T25W

Fig.A-20

GKM-28-12001800-T25 GKM-28-12001800-T25W

260 12 300 30 76

282.5 47 5 40 35 22h6
60h7

15 300 6 42 51 80 89 90 36.5

52 5 45 40 28h6 8
80h7

47.5

58.5

94.5 31 4-11 71 164 71 105.5

24.5 4-8.6 61 140 61

Round Weight 5kg

CAD Data GKM-22-T25 GKM-22-T25W

Round Weight 7kg

CAD DataGKM-28-T25 GKM-28-T25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A16

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 25W


Foot Mount Type Gearmotor with Brake
Fig.A-21
GLMN-12-5120-T25 GLMN-12-5120-T25W
Foot Mount type

Fig.A-22

GLMN-15-160240-T25 GLMN-15-160240-T25W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

200 300

22 20
12h6

209 300

27 24
15h6

11 80 7 300 35 50 35

4 84 13.5 55 94

13

Speed Control Gearmotor

5 99 8 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

4-6.5

76 90

300

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLMN-12-T25 GLMN-12-T25W

Round Weight 3kg

CAD Data GLMN-15-T25 GLMN-15-T25W

Gearmotor with Brake

Fig.A-23

GLMN-22-300900-T25 GLMN-22-300900-T25W

Fig.A-24

GLMN-28-12001800-T25 GLMN-28-12001800-T25W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

298 300

40 35
22h6

319 24.5 300

45 40
28h6

31
Gearmotor with Brake

30 80 12 300 65 90 55

6 139 90 94

36.5 8 15 300 90 125 65 140 175 110 167


With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4-11

130 154

4-11

Round Weight 5kg

CAD Data GLMN-22-T25 GLMN-22-T25W

Round Weight 7kg

CAD Data GLMN-28-T25 GLMN-28-T25W

Standard Motors

Cautions for Safety

Option

A17

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 25W
Flange Mount Type Gearmotor with Brake
Fig.A-25
GFMN-12-5120-T25 GFMN-12-5120-T25W
Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-26

GFMN-15-160240-T25 GFMN-15-160240-T25W

200 300

22 20
12h6

35

300

209

27 24
15h6

40

11 80

21 4 13.5 43 76 94

13

5 17

25 51 90

300

3.5 27.5 4-6.5

32 76

32

9 300

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD Data GFMN-12-T25 GFMN-12-T25W

Round Weight 3kg

CAD Data GFMN-15-T25 GFMN-15-T25W

Fig.A-27

GFMN-22-300900-T25 GFMN-22-300900-T25W
298

Fig.A-28

GFMN-28-12001800-T25 GFMN-28-12001800-T25W

40 35 300

319

45 40

300 30 80 22h6 148h7 6

24.5

185

82.5 36.5 89 94

170h7 28h6

31 8

215

93

105.5 4-11

300

12

4 47

4-11

164

300

15

4 50

186

Round Weight 5kg

CAD Data GFMN-22-T25 GFMN-22-T25W

Round Weight 7kg

CAD Data GFMN-28-T25 GFMN-28-T25W

Small Flange Mount Type Gearmotor with Brake


Fig.A-29
GKMN-22-300900-T25 GKMN-22-300900-T25W

Fig.A-30

GKMN-28-12001800-T25 GKMN-28-12001800-T25W

298 300

12

47 5 40 35 22h6 6 42 51 80 89 94
60h7

319 15 300 36.5

52 5 45 28h6 40 8
80h7

30 80

47.5

58.5

94.5 31 300 4-11 71 71 105.5

24.5 300 4-8.6 61 140 61

164

Round Weight 5kg

CAD Data GKMN-22-T25 GKMN-22-T25W

Round Weight 7kg Option P.E110

CAD DataGKMN-28-T25 GKMN-28-T25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A18

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A19

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 25W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

12 15
Standard Voltage (Continuous Rated 4 Poles)

0.29/0.27/0.27 0.27/0.26/0.26 0.21/0.21/0.21 0.29/0.27/0.27 0.27/0.26/0.26 0.27/0.26/0.26 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.10/0.10/0.10/0.10 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14

1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1500 1300/1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 E
Totally Enclosed or Totally Enclosed Fan-cooled

T40

200/200/220

50/60/60

18 22 28 32 12 15 18 22 28 32

40W

Double Voltage (Continuous Rated 4 Poles)

T40W

380/400/400/440 50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3-phase 40W 15 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2

N m kgf m 0.88 1.37 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 137 0.09 0.14 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

N 98 196 245 343 441 490 539 588 637 686 980 980 1080 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 60 65 70 100 100 110 140 140 140 180 180 180 280 280 280 520 520 520

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A21 P.A22 Fig.A-31 Fig.A-39 Fig.A-32 Fig.A-40


400V 400V

2kg

2kg

P.A25 P.A24 Fig.A-51 Fig.A-57 2kg 2kg

1/ 100 1/ 120 1/ 160

P.A21 P.A22 Fig.A-33 Fig.A-41 3kg 3kg P.A22 P.A21 Fig.A-34 Fig.A-42 4kg 4kg

P.A25 P.A24 Fig.A-52 Fig.A-58 3kg 3kg P.A25 P.A24 Fig.A-53 Fig.A-59 4kg 4kg

18

1/ 200 1/ 240 1/ 300

22

1/ 375 1/ 450 1/ 600

P.A21 P.A22 P.A23 P.A25 P.A26 Fig.A-35 Fig.A-43 Fig.A-47 P.A24 Fig.A-36 Fig.A-44 Fig.A-48 Fig.A-54 Fig.A-60 Fig.A-63
400V 400V
400V

5kg

5kg

5kg

5kg

5kg

5kg

28

1/ 750 1/ 900 1/1200

2.4 118 1.5 176 1.2 225 1 274

P.A21 P.A23 P.A23 P.A24 P.A25 P.A26 Fig.A-37 Fig.A-45 Fig.A-49 Fig.A-55 Fig.A-61 Fig.A-64 7kg 7kg 7kg 7kg 7kg 7kg P.A21 P.A23 P.A23 P.A24 P.A25 P.A26 Fig.A-38 Fig.A-46 Fig.A-50 Fig.A-56 Fig.A-62 Fig.A-65 11kg 11kg 11kg 11kg 11kg 11kg

32

1/1500 1/1800

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A9.

A20

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 40W
Foot Mount Type Gearmotor
Fig.A-31
300
Foot Mount type

GLM-12-560-T40
162 22 20
12h6

Fig.A-32
300

GLM-12-560-T40W
200 22 20
12h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

11 76 7 35 50 35

4 82 13.5 55 80

11

4 84 7 13.5 55
Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

35 50

35

4-6.5

76 90

Round Weight 2kg

CAD DataGLM-12-T40

Round Weight 2kg

CAD DataGLM-12-T40W

Fig.A-33
300

GLM-15-80120-T40 GLM-15-80120-T40W
172.5 27 24
15h6

Fig.A-34
300

GLM-18-160240-T40 GLM-18-160240-T40W
187.5 30 27
18h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

13 90 8 40 56 41

5 97 17 65

15 106 10 40 60 47 6 20.5 113 75

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

GLM-15-T40 CAD Data GLM-15-T40W

Round Weight 4kg

GLM-18-T40 CAD Data GLM-18-T40W

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Fig.A-35
300

GLM-22-300450-T40
260 40 35
22h6

Fig.A-36
300

GLM-22-300450-T40W
298 40 35
22h6

24.5

24.5

30 76 12 65 90 55

6 139 90 80

30

6 139 12 90

Speed Control Gearmotor with Brake Technical Information

4-11

130 154

65 90

55

4-11

130 154

Round Weight 5kg

CAD DataGLM-22-T40

Round Weight 5kg

CAD DataGLM-22-T40W

Standard Motors

Fig.A-37
300

GLM-28-600900-T40 GLM-28-600900-T40W
282.5 45 40
28h6

Fig.A-38
300

GLM-32-12001800-T40 GLM-32-12001800-T40W
313 55 50
32h6

Cautions for Safety

Option

31

35

36.5 90 15 90 125 65 140 175 8 110 167 90

41.5 10 18 130 168 70 170 208 130 198

4-11

4-13

Round Weight 7kg

GLM-28-T40 CAD Data GLM-28-T40W

Round Weight 11kg

GLM-32-T40 CAD Data GLM-32-T40W

A21

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 40W
Flange Mount Type Gearmotor
Fig.A-39
GFM-12-560-T40
Flange Mount type

Fig.A-40

GFM-12-560-T40W

162 300

22 20
12h6

200
35

300

22 20
12h6

35

11 76

21 4 76 13.5 43 80

11

21 4 76 13.5 43

3.5 27.5

4-6.5

32 76

32

3.5 27.5 4-6.5

32 76

32

Round Weight 2kg

CAD DataGFM-12-T40

Round Weight 2kg

CAD DataGFM-12-T40W

Fig.A-41

GFM-15-80120-T40 GFM-15-80120-T40W

Fig.A-42

GFM-18-160240-T40 GFM-18-160240-T40W

300

172.5

27 24
15h6

300
40

187.5

30 27
18h6

47

13 90

5 17

25 51 90 106

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

GFM-15-T40 CAD Data GFM-15-T40W

Round Weight 4kg

GFM-18-T40 CAD Data GFM-18-T40W

Fig.A-43

GFM-22-300450-T40

Fig.A-44

GFM-22-300450-T40W

260

40 35 300

298

40 35

300 30 76 22h6 148h7 6

24.5

185

82.5 30 89 80

24.5 22h6 148h7 6

185

82.5

89

12

4 47

4-11

164

300

12

4 47

4-11

164

Round Weight 5kg

CAD DataGFM-22-T40

Round Weight 5kg Option P.E110

CAD DataGFM-22-T40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A22

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Flange Mount Type Gearmotor


Fig.A-45
GFM-28-600900-T40 GFM-28-600900-T40W

Fig.A-46

GFM-32-12001800-T40 GFM-32-12001800-T40W
313

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

282.5

45 40 300

55 50

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

300 36.5 90 170h7 28h6 31 8

215

93 41.5 105.5 90

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

GFM-28-T40 CAD Data GFM-28-T40W

Round Weight 11kg

GFM-32-T40 CAD Data GFM-32-T40W

Gearmotor with Brake

Small Flange Mount Type Gearmotor


Fig.A-47
GKM-22-300450-T40

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Fig.A-48

GKM-22-300450-T40W

260 12 300 30 76 24.5 4-8.6 61 140 61 47 5 40 35 22h6 6


60h7

298 12 300 42 51 80 89 80 30

47 5 40 35 22h6 6
60h7

Gearmotor with Brake

42 51 80 89

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

24.5 4-8.6 61 140 61

Round Weight 5kg

CAD DataGKM-22-T40

Round Weight 5kg

CAD DataGKM-22-T40W

Fig.A-49

GKM-28-600900-T40 GKM-28-600900-T40W

Fig.A-50

GKM-32-12001800-T40 GKM-32-12001800-T40W

Standard Motors

282.5 15 300 36.5 90

52 5 45 40 28h6 8
80h7

313 15 300 47.5 58.5 41.5 90

63 5 55 50 32h6 10
88h7

Cautions for Safety

Option

71.5 58.5 113.5 35 126.5 86 198

94.5 31 4-11 71 164 71 105.5

4-13

86

Round Weight 7kg

CAD Data GKM-28-T40 GKM-28-T40W

Round Weight 11kg

CAD Data GKM-32-T40 GKM-32-T40W

A23

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.A-51
GLMN-12-560-T40 GLMN-12-560-T40W
Foot Mount type

Fig.A-52

GLMN-15-80120-T40 GLMN-15-80120-T40W

200 300

22 20
12h6

209 300

27 24
15h6

11 80 7 300 35 50 35

4 84 13.5 55 94

13

5 99 8 17 65

4-6.5

76 90

300

40 56

41

4-6.5

90 104

Round Weight 2kg

GLMN-12-T40 CAD Data GLMN-12-T40W

Round Weight 3kg

CAD Data GLMN-15-T40 GLMN-15-T40W

Fig.A-53

GLMN-18-160240-T40 GLMN-18-160240-T40W

Fig.A-54

GLMN-22-300450-T40 GLMN-22-300450-T40W

224.5 300

30 27 300
18h6

298

40 35
22h6

24.5

15 110 10 300 40 60 47

6 20.5 75 115 80

30

6 139 12 90

4-8.5

110 130

300

65 90

55

4-11

130 154

Round Weight 4kg

CAD Data GLMN-18-T40 GLMN-18-T40W

Round Weight 5kg

GLMN-22-T40 CAD DataGLMN-22-T40W

Fig.A-55

GLMN-28-600900-T40 GLMN-28-600900-T40W

Fig.A-56

GLMN-32-12001800-T40 GLMN-32-12001800-T40W

319 300

45 40
28h6

349.5 31 300 41.5 8 167 110 94

55 50
32h6

35

36.5 94 15 300 90 125 65 140 175

10 18 300 130 168 70 170 208

198 130

4-11

4-13

Round Weight 7kg

GLMN-28-T40 CAD Data GLMN-28-T40W

Round Weight 11kg Option P.E110

GLMN-32-T40 CAD DataGLMN-32-T40W

A24

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor with Brake


Fig.A-57
GFMN-12-560-T40 GFMN-12-560-T40W

Fig.A-58

GFMN-15-80120-T40 GFMN-15-80120-T40W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

200 300

22 20
12h6

35

300

209

27 24
15h6

40

11 80

21 4 76 13.5 43 94

13

5 17

25 51 90

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

300

3.5 27.5 4-6.5

32 76

32

9 300

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD DataGFMN-12-T40 GFMN-12-T40W

Round Weight 3kg

GFMN-15-T40 CAD Data GFMN-15-T40W

Gearmotor with Brake

Fig.A-59

GFMN-18-160240-T40 GFMN-18-160240-T40W

Fig.A-60

GFMN-22-300450-T40 GFMN-22-300450-T40W
298

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

300

224.5

30 27
18h6

40 35

47

300 15 110 29 6 20.5 10 300 5 37 44 106 44 59 106 80 30 22h6 148h7 6

24.5

185

82.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

89

300

12

4 47

4-11

4-8.5

164

Round Weight 4kg

CAD DataGFMN-18-T40 GFMN-18-T40W

Round Weight 5kg

GFMN-22-T40 CAD Data GFMN-22-T40W

Speed Control Gearmotor with Brake Technical Information

Fig.A-61

GFMN-28-600900-T40 GFMN-28-600900-T40W
319 45 40

Fig.A-62

GFMN-32-12001800-T40 GFMN-32-12001800-T40W
55 50

349.5

Standard Motors

Cautions for Safety

300 36.5 94 170h7 28h6 8

31

300

215

93 41.5 105.5 94

180h7 32h6

35 10

250

107.5

Option

126.5 4- 13

300

15

4 50

4-11

186

300

15

4 60

215

Round Weight 7kg

CAD Data GFMN-28-T40 GFMN-28-T40W

Round Weight 11kg

GFMN-32-T40 CAD Data GFMN-32-T40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A25

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 40W
Small Flange Mount Type Gearmotor with Brake
Fig.A-63
GKMN-22-300450-T40 GKMN-22-300450-T40W
Small Flange Mount type (Frame Number 2232)

Fig.A-64

GKMN-28-600900-T40 GKMN-28-600900-T40W

298 300

12

47 5 40 35 22h6 6 42 51 80 89 94
60h7

319 15 300 36.5

52 5 45 28h6 40 8
80h7

30 80

47.5

58.5

94.5 31 300 4-11 71 71 105.5

24.5 300 4-8.6 61 140 61

164

Round Weight 5kg

CAD Data GKMN-22-T40 GKMN-22-T40W

Round Weight 7kg

CAD Data GKMN-28-T40 GKMN-28-T40W

Fig.A-65

GKMN-32-12001800-T40 GKMN-32-12001800-T40W

349.5 15 300 41.5 94

63 5 55 50 32h6
88h7

10

71.5 58.5 113.5 35 126.5 86

300 4-13 86 198

Round Weight 11kg

CAD Data GKMN-32-T40 GKMN-32-T40W

A26

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A27

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 60W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

12 15
Standard Voltage (Continuous Rated 4 Poles)

0.42/0.39/0.39 0.40/0.36/0.36 0.33/0.33/0.33 0.42/0.39/0.39 0.40/0.36/0.36 0.40/0.36/0.36 0.17/0.17/0.17/0.17 0.16/0.16/0.16/0.16 0.20/0.20/0.20/0.20 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17

1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1250/1300/1500/1550 1300/1350/1550/1600 1300/1350/1550/1600 E
Totally Enclosed or Totally Enclosed Fan-cooled

T60

200/200/220

50/60/60

18 22 28 32 15 18

60W

Double Voltage (Continuous Rated 4 Poles)

T60W

380/400/400/440 50/50/60/60

22 28 32

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 12 15 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 3-phase 60W 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2

N m kgf m 1.37 2.06 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 216 0.14 0.21 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

N 98 196 245 343 441 490 539 784 882 882 1270 1270 1370 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 80 90 90 130 130 140 140 140 140 180 180 180 280 280 280 520 520 520

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A29 P.A30 Fig.A-66 Fig.A-72 2kg 2kg P.A29 P.A30 Fig.A-66 Fig.A-73
Frame No.15 Frame No.15

P.A32 P.A33 Fig.A-81 Fig.A-87 2kg 2kg P.A32 P.A33 Fig.A-82 Fig.A-88
Frame No.15Frame No.15

3kg

3kg

3kg

3kg

P.A29 P.A30 Fig.A-67 Fig.A-73 3kg 3kg

P.A33 P.A32 Fig.A-82 Fig.A-88 3kg 3kg

1/ 100 18 1/ 120 1/ 160 1/ 200


1/ 240

P.A29 P.A30 Fig.A-68 Fig.A-74 4kg 4kg

P.A33 P.A32 Fig.A-83 Fig.A-89 4kg 4kg

1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.A29 P.A30 P.A31 P.A32 P.A33 P.A34 Fig.A-69 Fig.A-75 Fig.A-78 Fig.A-84 Fig.A-90 Fig.A-93 5kg 5kg 5kg 5kg 5kg 5kg P.A29 P.A30 P.A31 P.A32 P.A33 P.A34 Fig.A-70 Fig.A-76 Fig.A-79 Fig.A-85 Fig.A-91 Fig.A-94 7kg 7kg 7kg 7kg 7kg 7kg P.A29 P.A30 P.A31 P.A32 P.A33 P.A34 Fig.A-71 Fig.A-77 Fig.A-80 Fig.A-86 Fig.A-92 Fig.A-95 11kg 11kg 11kg 11kg 11kg 11kg

2.4 176 1.5 284 1.2 353 1 421

Note) As for reduction ratio 1/5 to 1/30, the frame number will be "12" for the standard voltage, "15" for other voltages. The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A9.

A28

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 60W
Foot Mount Type Gearmotor
Fig.A-66
GLM-12-530-T60
Foot Mount type

Fig.A-67

GLM-15-4060-T60 GLM-15-5 60-T60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

200 300

22 20
12h6

172.5 300

27 24
15h6

11 80 7 35 50 35

4 84 13.5 55 90

13

5 97 8 17 65

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD DataGLM-12-T60

Round Weight 3kg

GLM-15-T60 CAD DataGLM-15-T60W

Fig.A-68

GLM-18-80240-T60 GLM-18-80240-T60W

Fig.A-69

GLM-22-300450-T60 GLM-22-300450-T60W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

187.5 300

30 27 300
18h6

298

40 35
22h6

24.5

Gearmotor with Brake

15 106 10 40 60 47 6 20.5 113 75 80

30

6 139 12 90

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-8.5

110 130

65 90

55

4-11

130 154

Round Weight 4kg

GLM-18-T60 CAD Data GLM-18-T60W

Round Weight 5kg

GLM-22-T60 CAD Data GLM-22-T60W

Speed Control Gearmotor with Brake Technical Information

Fig.A-70

GLM-28-600900-T60 GLM-28-600900-T60W

Fig.A-71

GLM-32-12001800-T60 GLM-32-12001800-T60W

Standard Motors

282.5 300

45 40
28h6

313 31 300 41.5 8 167 110 90

55 50
32h6

Cautions for Safety

35
Option

36.5 90 15 90 125 65 140 175

10 18 130 168 70 170 208 130

198

4-11

4-13

Round Weight 7kg

CAD Data GLM-28-T60 GLM-28-T60W

Round Weight 11kg

CAD Data GLM-32-T60 GLM-32-T60W

A29

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 60W
Flange Mount Type Gearmotor
Fig.A-72
GFM-12-530-T60
Flange Mount type

Fig.A-73

GFM-15-4060-T60 GFM-15-5 60-T60W

200 300

22 20
12h6

35

300

172.5

27 24
15h6

40

11 80

21 4 76 13.5 43 90

13

5 17

25 51 90

3.5 27.5 4-6.5

32 76

32

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD DataGFM-12-T60

Round Weight 3kg

GFM-15-T60 CAD Data GFM-15-T60W

Fig.A-74

GFM-18-80240-T60 GFM-18-80240-T60W

Fig.A-75

GFM-22-300450-T60 GFM-22-300450-T60W

300

187.5

298 30 27
18h6 47

40 35

300 29 6 20.5 59 106 80 30 22h6 148h7 6

15 106

24.5

185

82.5

89

10

5 37

4-8.5

44 106

44

12

4 47

4-11

164

Round Weight 4kg

GFM-18-T60 CAD Data GFM-18-T60W

Round Weight 5kg

GFM-22-T60 CAD Data GFM-22-T60W

Fig.A-76

GFM-28-600900-T60 GFM-28-600900-T60W

Fig.A-77

GFM-32-12001800-T60 GFM-32-12001800-T60W

282.5

45 40 300

313

55 50

300 36.5 90 170h7 28h6 8

31

215

93 41.5 105.5 90

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

CAD Data GFM-28-T60 GFM-28-T60W

Round Weight 11kg

GFM-32-T60 CAD Data GFM-32-T60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A30

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mount Type Gearmotor


Fig.A-78
GKM-22-300450-T60 GKM-22-300450-T60W

Fig.A-79

GKM-28-600900-T60 GKM-28-600900-T60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

298 12 300 30 80 24.5 4-8.6 61 140 61 47 5 40 35 22h6 6


60h7

282.5 15 300 42 51 80 89 90 31 4-11 71 164 71 36.5 52 5 45 40 28h6 8


80h7

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

47.5

58.5

94.5 105.5

Round Weight 5kg

GKM-22-T60 CAD Data GKM-22-T60W

Round Weight 7kg

CAD Data GKM-28-T60 GKM-28-T60W

Fig.A-80

GKM-32-12001800-T60 GKM-32-12001800-T60W
313 15 63 5 55 50 32h6 10 41.5
88h7

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

300

71.5 58.5 113.5 35 126.5 86 198

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

90

4-13

86

Round Weight 11kg

GKM-32-T60 CAD Data GKM-32-T60W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A31

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 60W
Foot Mount Type Gearmotor with Brake
Fig.A-81
GLMN-12-530-T60
Foot Mount type

Fig.A-82

GLMN-15-4060-T60 GLMN-15-5 60-T60W

200 300

22 20
12h6

209 300

27 24
15h6

11 80 7 35 50 35

4 84 13.5 55 94

13

5 99 8 17 65

300

4-6.5

76 90

300

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD DataGLMN-12-T60

Round Weight 3kg

GLMN-15-T60 CAD DataGLMN-15-T60W

Fig.A-83

GLMN-18-80240-T60 GLMN-18-80240-T60W

Fig.A-84

GLMN-22-300450-T60 GLMN-22-300450-T60W

224.5 300

30 27 300
18h6

298

40 35
22h6

24.5

15 110 10 300 40 60 47

6 20.5 75 115 80

30

6 139 12 90

4-8.5

110 130

300

65 90

55

4-11

130 154

Round Weight 4kg

GLMN-18-T60 CAD DataGLMN-18-T60W

Round Weight 5kg

GLMN-22-T60 CAD DataGLMN-22-T60W

Fig.A-85

GLMN-28-600900-T60 GLMN-28-600900-T60W

Fig.A-86

GLMN-32-12001800-T60 GLMN-32-12001800-T60W

319 300

45 40
28h6

349.5 31 300 41.5 8 167 110 94

55 50
32h6

35

36.5 94 15 300 90 125 65 140 175

10 18 300 130 168 70 170 208

198 130

4-11

4-13

Round Weight 7kg

GLMN-28-T60 CAD DataGLMN-28-T60W

Round Weight 11kg Option P.E110

GLMN-32-T60 CAD DataGLMN-32-T60W

A32

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor with Brake


Fig.A-87
GFMN-12-530-T60

Fig.A-88

GFMN-15-4060-T60 GFMN-15-5 60-T60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

200 300

22 20
12h6

35

300

209

27 24
15h6

40

Waterresistant Gearmotor with Brake Speed Control Gearmotor

11 80

21 4 13.5 43 76 94

13

5 17

25 51 90

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

300

3.5 27.5 4-6.5

32 76

32

9 300

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD DataGFMN-12-T60

Round Weight 3kg

CAD DataGFMN-15-T60 GFMN-15-T60W

Gearmotor with Brake

Fig.A-89

GFMN-18-80240-T60 GFMN-18-80240-T60W

Fig.A-90

GFMN-22-300450-T60 GFMN-22-300450-T60W
298 40 35

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

300

225.5

30 27
18h6

47

300 29 6 20.5 59 106 80 30 22h6 148h7 6

24.5

15 110

185

82.5
With Waterresistant Brake Motor

89

10 300

5 37

4-8.5

44 106

44

300

12

4 47

4-11

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

164

Round Weight 4kg

GFMN-18-T60 CAD DataGFMN-18-T60W

Round Weight 5kg

GFMN-22-T60 CAD DataGFMN-22-T60W

Speed Control Gearmotor with Brake Technical Information

Fig.A-91

GFMN-28-600900-T60 GFMN-28-600900-T60W
319

Fig.A-92

GFMN-32-12001800-T60 GFMN-32-12001800-T60W

Standard Motors

45 40 300

349.5

55 50

Cautions for Safety

300 36.5 94 170h7 28h6 8

31

215

93 41.5 105.5 94

180h7 32h6

35 10

250

107.5

Option

126.5 4- 13

300

15

4 50

4-11

186

300

15

4 60

215

Round Weight 7kg

GFMN-28-T60 CAD DataGFMN-28-T60W

Round Weight 11kg

GFMN-32-T60 CAD DataGFMN-32-T60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A33

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 60W
Small Flange Mount Type Gearmotor with Brake
Fig.A-93
GKMN-22-300450-T60 GKMN-22-300450-T60W
Small Flange Mount type (Frame Number 2232)

Fig.A-94

GKMN-28-600900-T60 GKMN-28-600900-T60W

298 300

12

47 5 40 35 22h6 6 42 51 80 89 94
60h7

319 15 300 36.5

52 5 45 28h6 40 8
80h7

30 80

47.5

58.5

94.5 31 300 4-11 71 164 71 105.5

24.5 300 4-8.6 61 140 61

Round Weight 5kg

GKMN-22-T60 CAD DataGKMN-22-T60W

Round Weight 7kg

GKMN-28-T60 CAD DataGKMN-28-T60W

Fig.A-95

GKMN-32-12001800-T60 GKMN-32-12001800-T60W

349.5 15 300 41.5 94

63 5 55 50 32h6
88h7

10

71.5 58.5 113.5 35 126.5 86 198

300 4-13 86

Round Weight 11kg

CAD DataGKMN-32-T60 GKMN-32-T60W

A34

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A35

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 90W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

15 18
Standard Voltage (Continuous Rated 4 Poles)

0.51/0.48/0.48 0.47/0.47/0.47 0.51/0.48/0.48 0.51/0.48/0.48 0.47/0.47/0.47 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24

1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 E
Totally Enclosed or Totally Enclosed Fan-cooled

T90

200/200/220

50/60/60

28 32 40 15 18

90W

Double Voltage (Continuous Rated 4 Poles)

T90W

380/400/400/440 50/50/60/60

28 32 40

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 15 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3-phase 90W 18 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m kgf m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

N 147 245 343 441 539 588 686 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 15 25 35 45 55 60 70 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A37 P.A39 Fig.A-96 Fig.A-104 P.A37 P.A39 Fig.A-97 Fig.A-105


400V 400V

P.A43 P.A42 Fig.A-116 Fig.A-121 4kg 3kg

3kg

3kg

1/ 100 1/ 120
1/ 160 1/ 200 1/ 240

P.A37 P.A39 Fig.A-98 Fig.A-106 4kg 4kg

P.A43 P.A42 Fig.A-117 Fig.A-122 4kg 4kg

1/ 300 28 1/ 375 1/ 450 1/ 600 32 1/ 750 1/ 900 1/1200 40 1/1500 1/1800

P.A37 P.A39 P.A41 Fig.A-99 Fig.A-107 Fig.A-112 P.A37 P.A39 P.A41 Fig.A-100 Fig.A-108 Fig.A-113
400V

7kg

400V

7kg

400V

7kg

P.A42 P.A43 P.A43 Fig.A-118 Fig.A-123 Fig.A-126 7kg 7kg 7kg P.A42 P.A43 P.A43 Fig.A-119 Fig.A-124 Fig.A-127 11kg 11kg 11kg P.A42 P.A43 Fig.A-120 Fig.A-125 15kg 15kg

P.A40 P.A41 P.A38 Fig.A-101 Fig.A-109 Fig.A-114 P.A40 P.A41 P.A338 Fig.A-102 Fig.A-110 Fig.A-115
400V

11kg

400V

11kg

400V

11kg

P.A38 P.A40 Fig.A-103 Fig.A-111 15kg 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A9.

A36

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 90W
Foot Mount Type Gearmotor
Fig.A-96
GLM-15-530-T90
Foot Mount type

Fig.A-97

GLM-15-530-T90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

173 300

27 24
15h6

209 300

27 24
15h6

13 90 8 40 56 41

5 97 17 65

13 94 8 40 56 41

Speed Control Gearmotor

5 99 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

90 104

4-6.5

90 104

Round Weight 3kg

CAD Data GLM-15-T90

Round Weight 3kg

CAD Data GLM-15-T90W

Fig.A-98

GLM-18-40240-T90 GLM-18-40240-T90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

187.5 300

30 27
18h6

15 106 10 40 60 47 6 20.5 113 75

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-8.5

110 130

Round Weight 4kg

GLM-18-T90 CAD Data GLM-18-T90W

Speed Control Gearmotor with Brake

Fig.A-99

GLM-28-300450-T90

Fig.A-100

GLM-28-300450-T90W

Technical Information

Standard Motors

282.5 300

45 40
28h6

319 31 300

45 40
28h6

31

Cautions for Safety

Option

36.5 90 15 90 125 65 140 175 8 110 167 94

36.5 8 15 90 125 65 140 175 110 167

4-11

4-11

Round Weight 7kg

CAD Data GLM-28-T90

Round Weight 7kg

CAD Data GLM-28-T90W

A37

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 90W
Foot Mount Type Gearmotor
Fig.A-101
GLM-32-600900-T90
Foot Mount type

Fig.A-102

GLM-32-600900-T90W

313

55 50
32h6

349.5 35 300 41.5 10 198 130 94

55 50
32h6

35

300 41.5 90 18 130 168 70

10 18 130 168 70 170 208

198 130

4-13

170 208

4-13

Round Weight 11kg

CAD Data GLM-32-T90

Round Weight 11kg

CAD Data GLM-32-T90W

Fig.A-103

GLM-40-12001800-T90 GLM-40-12001800-T90W

357

65 60
40h6

43

300 49 106 20 150 196 90

12

230 150

4-15

210 254

Round Weight 15kg

CAD Data GLM-40-T90 GLM-40-T90W

A38

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor


Fig.A-104
GFM-15-530-T90

Fig.A-105

GFM-15-530-T90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

300

172.5

27 24
15h6

300
40

209

27 24
15h6

40

Waterresistant Gearmotor with Brake Speed Control Gearmotor

13 90

5 17

25 51 90 94

13

5 17

25 51 90

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4 33

4-6.5

38 90

38

4 33

4-6.5

38 90

38

Round Weight 3kg

CAD Data GFM-15-T90

Round Weight 3kg

CAD Data GFM-15-T90W

Fig.A-106

GFM-18-40240-T90 GFM-18-40240-T90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

300

187.5

30 27
18h6

47

Gearmotor with Brake

15 106

29 6 20.5 59 106

With Waterresistant Brake Motor Speed Control Gearmotor

10

5 37

4-8.5

44 106

44

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Round Weight 4kg

CAD Data GFM-18-T90 GFM-18-T90W

Speed Control Gearmotor with Brake

Fig.A-107

GFM-28-300450-T90

Fig.A-108

GFM-28-300450-T90W

Technical Information

Standard Motors

282.5

45 40 300

319

45 40

Cautions for Safety

300 36.5 90 170h7 28h6 8

31

215

93 36.5 105.5 94

170h7 28h6

31 8

Option

215

93

105.5 4-11

15

4 50

4-11

186

15

4 50

186

Round Weight 7kg

CAD Data GFM-28-T90

Round Weight 7kg

CAD Data GFM-28-T90W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A39

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft3-Phase 90W
Flange Mount Type Gearmotor
Fig.A-109
GFM-32-600900-T90
Flange Mount type

Fig.A-110

GFM-32-600900-T90W

313

55 50 300

349.5

55 50

300 41.5 90 180h7 32h6 10

35

250

107.5 41.5 126.5 94

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 60

4- 13

215

15

4 60

215

Round Weight 11kg

CAD Data GFM-32-T90

Round Weight 11kg

CAD Data GFM-32-T90W

Fig.A-111

GFM-40-12001800-T90 GFM-40-12001800-T90W

357

65 60

300 230h7 49 106 40h6 12

43

310

135

149 4-18

18

5 71

270

Round Weight 15kg

GFM-40-T90 CAD Data GFM-40-T90W

A40

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mount Type Gearmotor


Fig.A-112
GKM-28-300450-T90

Fig.A-113

GKM-28-300450-T90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

282.5 15 300 36.5 90 31 4-11 71 164 71 52 5 45 40 28h6 8


80h7

319 15 300 47.5 58.5 36.5 94 31 4-11 71 164 71 52 5 45 28h6 40 8


80h7

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

47.5

58.5

94.5 105.5

94.5 105.5

Round Weight 7kg

CAD Data GKM-28-T90

Round Weight 7kg

CAD Data GKM-28-T90W

With Waterresistant Brake Motor

Fig.A-114

GKM-32-600900-T90

Fig.A-115

GKM-32-600900-T90W

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

313 15 300 41.5 90 35 4-13 86 198 86 63 5 55 50 32h6 10


88h7

349.5 15 300 71.5 58.5 113.5 126.5 86 198 94 35 4-13 86 41.5 63 5 55 50 32h6
88h7

10

71.5 58.5 113.5 126.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Round Weight 11kg

CAD Data GKM-32-T90

Round Weight 11kg

CAD Data GKM-32-T90W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A41

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 90W
Foot Mount Type Gearmotor with Brake
Fig.A-116
GLMN-15-530-T90 GLMN-15-530-T90W
Foot Mount type

Fig.A-117

GLMN-18-40240-T90 GLMN-18-40240-T90W

209 300

27 24
15h6

224.5 300

30 27
18h6

13 94 8 300 40 56 41

5 99 17 65

15 110 10 300 40 60 47

6 20.5 75 115

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLMN-15-T90 GLMN-15-T90W

Round Weight 4kg

CAD Data GLMN-18-T90 GLMN-18-T90W

Fig.A-118

GLMN-28-300450-T90 GLMN-28-300450-T90W

Fig.A-119

GLMN-32-600900-T90 GLMN-32-600900-T90W

319 300

45 40
28h6

349.5 31 300 41.5 8 167 110 94

55 50
32h6

35

36.5 94 15 300 90 125 65 140 175

10 18 300 130 168 70 170 208

198 130

4-11

4-13

Round Weight 7kg

GLMN-28-T90 CAD Data GLMN-28-T90W

Round Weight 11kg

GLMN-32-T90 CAD Data GLMN-32-T90W

Fig.A-120

GLMN-40-12001800-T90 GLMN-40-12001800-T90W

394

65 60
40h6

43

300 49 110 20 300 150 196 90

12

230 150

4-15

210 254

Round Weight 15kg

CAD Data GLMN-40-T90 GLMN-40-T90W

A42

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Flange Mount Type Gearmotor with Brake


Fig.A-121
300

Flange Mount type

GFMN-15-530-T90 GFMN-15-530-T90W
209 27 24 15h6 13 5 17 9 4 33 38 90 38 40 25 51 90

Fig.A-122
300

GFMN-18-40240-T90 GFMN-18-40240-T90W
224.5 30 27
18h6 47

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

15 110

29 6 20.5 59 106

94

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

300

4-6.5

10 300

5 37

4-8.5

44 106

44

Round Weight 3kg

GFMN-15-T90 CAD Data GFMN-15-T90W

Round Weight 4kg

GFMN-18-T90 CAD Data GFMN-18-T90W

Fig.A-123

GFMN-28-300450-T90 GFMN-28-300450-T90W
319 45 40 31 8

Fig.A-124

GFMN-32-600900-T90 GFMN-32-600900-T90W
349.5 55 50 35 10

300 36.5 94 300 15 4 50


170h7 28h6

300
21

With Waterresistant Brake Motor

93 41.5 105.5 94

180h7 32h6

25

0 107.5
Speed Control Gearmotor

126.5 4-13
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

4-11

186

300

15

4 60

215

Round Weight 7kg

GFMN-28-T90 CAD Data GFMN-28-T90W

Round Weight 11kg

GFMN-32-T90 CAD Data GFMN-32-T90W

Fig.A-125

GFMN-40-12001800-T90 GFMN-40-12001800-T90W
394 65 60 43 12

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

300 49 110 300 18 5 71


230h7 40h6

31

135

149 4-18

270

Speed Control Gearmotor with Brake Technical Information

Round Weight 15kg

CAD Data GFMN-40-T90 GFMN-40-T90W

Small Flange Mount Type Gearmotor with Brake


Fig.A-126
300 36.5 94 31 300 4-11 71 164 71

Standard Motors

GKMN-28-300450-T90 GKMN-28-300450-T90W
319 15 52 5 45 28h6 40 8
80h7

Fig.A-127
300 47.5 58.5

GKMN-32-600900-T90 GKMN-32-600900-T90W
349.5 15 63 5 55 50 32h6 10 41.5
88h7

Cautions for Safety

Option

71.5 58.5 113.5 35 126.5 86 198

94.5 105.5

94 300 4-13 86

Round Weight 7kg

GKMN-28-T90 CAD Data GKMN-28-T90W

Round Weight 11kg

GKMN-32-T90 CAD Data GKMN-32-T90W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A43

A44

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A45

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

12 22 12 22

0.39/0.35 0.39/0.35 0.21/0.19 0.21/0.19

1350/1650 1350/1650 1350/1650 1350/1650

5 5 1.2 1.2 E
Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 1-phase 15W 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m kgf m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98.0 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

N 98 196 245 343 441 490 539 588 637 686 735 735 784 784 784 784 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 80 80 80 180 180 180 180 180 180 180 180 180

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A47 P.A47 Fig.A-128 Fig.A-130 2kg 2kg

P.A48 P.A48 Fig.A-133 Fig.A-135 2kg 2kg

1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 22 1/ 750 1/ 900 1/1200 1/1500 1/1800

P.A47 P.A47 P.A47 P.A48 P.A48 P.A48 Fig.A-129 Fig.A-131 Fig.A-132 Fig.A-134 Fig.A-136 Fig.A-137 5kg 5kg 5kg 5kg 5kg 5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A45.

A46

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-TypeParallel Shaft1-Phase 15W
Foot Mount Type Gearmotor
Fig.A-128
300
Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

GLM-12-5240-S15 GLM-12-5240-S15W
162 22 20
12h6

Fig.A-129

GLM-22-3001800-S15 GLM-22-3001800-S15W
260

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

40 35
22h6

24.5

300 4 82 30 13.5 55 76 12 6 139 90

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

11 76 7 35 50 35

4-6.5

76 90

65 90

55

4-11

130 154

Round Weight 2kg

CAD Data GLM-12-S15 GLM-12-S15W

Round Weight 5kg

CAD Data GLM-22-S15 GLM-22-S15W

Flange Mount Type Gearmotor


Fig.A-130
300

With Waterresistant Brake Motor

GFM-12-5240-S15 GFM-12-5240-S15W
162

Fig.A-131

GFM-22-3001800-S15 GFM-22-3001800-S15W
260

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

22 20
12h6

35

40 35

Gearmotor with Brake

11 76

21 4 76 13.5 43 76

300 30 22h6 148h7 6

24.5

185

82.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

89

3.5 27.5

4-6.5

32 76

32 12

4 47

4-11

164

Round Weight 2kg

GFM-12-S15 CAD Data GFM-12-S15W

Round Weight 5kg

GFM-22-S15 CAD Data GFM-22-S15W

Small Flange Mount Type Gearmotor


Fig.A-132
GKM-22-3001800-S15 GKM-22-3001800-S15W
260 12 300 30 76 24.5 4-8.6 61 140 61

Standard Motors

47 5 40 35 22h6 6
60h7

Cautions for Safety

Option

42 51 80 89

Round Weight 5kg

CAD Data GKM-22-S15 GKM-22-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A47

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-TypeParallel Shaft1-Phase 15W
Foot Mount Type Gearmotor with Brake
Fig.A-133
300
Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

GLMN-12-5240-S15 GLMN-12-5240-S15W
200

Fig.A-134

GLMN-22-3001800-S15 GLMN-22-3001800-S15W
298

22 20 300
12h6

40 35
22h6

24.5

11 80 7 300 35 50 35

4 84 13.5 55 80

30

6 139 12 90

4-6.5

76 90

300

65 90

55

4-11

130 154

Round Weight 2kg

GLMN-12-S15 CAD Data GLMN-12-S15W

Round Weight 5kg

GLMN-22-S15 CAD Data GLMN-22-S15W

Flange Mount Type Gearmotor with Brake


Fig.A-135
300

GFMN-12-5240-S15 GFMN-12-5240-S15W
200

Fig.A-136

GFMN-22-3001800-S15 GFMN-22-3001800-S15W
298

22 20
12h6

35

40 35

11 80

21 4 76 13.5 43 80

300 30 22h6 148h7 6

24.5

185

82.5

89

300

3.5 27.5 4-6.5

32 76

32 300 12

4 47

4-11

164

Round Weight 2kg

GFMN-12-S15 CAD Data GFMN-12-S15W

Round Weight 5kg

GFMN-22-S15 CAD Data GFMN-22-S15W

Small Flange Mount Type Gearmotor with Brake


Fig.A-137
GKMN-22-3001800-S15 GKMN-22-3001800-S15W
298 300 30 80 24.5 300 4-8.6 61 140 61

12

47 5 40 35 22h6 6
60h7

42 51 80 89

Round Weight 5kg

CAD Data GKMN-22-S15 GKMN-22-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A48

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A49

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 25W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

12
Standard Voltage (Continuous Rated 4 Poles)

0.48/0.48 0.44/0.45 0.48/0.48 0.44/0.45 0.26/0.25 0.23/0.24 0.26/0.25 0.23/0.24

1350/1600 1350/1650 1350/1600 1350/1650 1350/1600 1350/1650 1350/1600 1350/1650

7 7 7 7 1.7 1.7 1.7 1.7 E


Totally Enclosed or Totally Enclosed Fan-cooled

S25 25W

100/100

50/60

15 22 28 12 15 22 28

Double Voltage (Continuous Rated 4 Poles)

S25W

200/200

50/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 1/ 1-phase 25W 15 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2

N m kgf m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110 180 180 180 180 180 180 280 280 280

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A51 P.A52 Fig.A-138 Fig.A-142 2kg 2kg

P.A54 P.A53 Fig.A-148 Fig.A-152 2kg 2kg

1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 22 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 28 1/1500 1/1800

P.A51 P.A52 Fig.A-139 Fig.A-143 3kg 3kg

P.A54 P.A53 Fig.A-149 Fig.A-153 3kg 3kg

P.A51 P.A52 P.A52 P.A53 P.A54 P.A54 Fig.A-140 Fig.A-144 Fig.A-146 Fig.A-150 Fig.A-154 Fig.A-156 5kg 5kg 5kg 5kg 5kg 5kg

1.5 108 1.2 137 1 167

P.A51 P.A52 P.A52 P.A53 P.A54 P.A54 Fig.A-141 Fig.A-145 Fig.A-147 Fig.A-151 Fig.A-155 Fig.A-157 7kg 7kg 7kg 7kg 7kg 7kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A45.

A50

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
Foot Mount Type Gearmotor with Brake
Fig.A-138
GLM-12-5120-S25 GLM-12-5120-S25W
Foot Mount type

Fig.A-139

GLM-15-160240-S25 GLM-15-160240-S25W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

162 300

22 20
12h6

172.5 300

27 24
15h6

11 76 7 35 50 35

4 82 13.5 55

13 90 8 40 56 41

5 97 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

4-6.5

90 104

Round Weight 2kg

CAD Data GLM-12-S25 GLM-12-S25W

Round Weight 3kg

CAD Data GLM-15-S25 GLM-15-S25W

Fig.A-140

GLM-22-300900-S25 GLM-22-300900-S25W

Fig.A-141

GLM-28-12001800-S25 GLM-28-12001800-S25W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

260 300

40 35
22h6

282.5 24.5 300

45 40
28h6

31

Gearmotor with Brake

30 76 12 65 90 55

6 139 90 90

36.5 8 15 90 125 65 140 175 110 167

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-11

130 154

4-11

Round Weight 5kg

GLM-22-S25 CAD Data GLM-22-S25W

Round Weight 7kg

GLM-28-S25 CAD Data GLM-28-S25W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A51

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 25W
Flange Mount Type Gearmotor
Fig.A-142
GFM-12-5120-S25 GFM-12-5120-S25W
Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-143

GFM-15-160240-S25 GFM-15-160240-S25W

162 300

22 20
12h6

35

300

172.5

27 24
15h6

40

11 76

21 4 76 13.5 43 90

13

5 17

25 51 90

3.5 27.5

4-6.5

32 76

32

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD Data GFM-12-S25 GFM-12-S25W

Round Weight 3kg

CAD Data GFM-15-S25 GFM-15-S25W

Fig.A-144

GFM-22-300900-S25 GFM-22-300900-S25W
260

Fig.A-145

GFM-28-12001800-S25 GFM-28-12001800-S25W

40 35 300

282.5

45 40

300 30 76 22h6 148h7 6

24.5

185

82.5 36.5 89 90

170h7 28h6

31 8

215

93

105.5 4-11

12

4 47

4-11

164

15

4 50

186

Round Weight 5kg

CAD Data GFM-22-S25 GFM-22-S25W

Round Weight 7kg

CAD Data GFM-28-S25 GFM-28-S25W

Small Flange Mount Type Gearmotor


Fig.A-146
GKM-22-300900-S25 GKM-22-300900-S25W
260 12 300 30 76 24.5 4-8.6 61 140 61

Fig.A-147

GKM-28-12001800-S25 GKM-28-12001800-S25W
282.5 15

47 5 40 35 22h6 6
60h7

300 42 51 80 89 90 36.5

52 5 45 40 28h6 8
80h7

47.5

58.5

94.5 31 4-11 71 164 71 105.5

Round Weight 5kg

GKM-22-S25 CAD Data GKM-22-S25W

Round Weight 7kg

CAD Data GKM-28-S25 GKM-28-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A52

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 25W
Foot Mount Type Gearmotor with Brake
Fig.A-148
300
Foot Mount type

GLMN-12-5120-S25 GLMN-12-5120-S25W
200

Fig.A-149
300

GLMN-15-160240-S25 GLMN-15-160240-S25W
209

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

22 20
12h6

27 24
15h6

Waterresistant Gearmotor with Brake Speed Control Gearmotor

11 80 7 300 35 50 35

4 84 13.5 55 94

13

5 99 8 17 65

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

4-6.5

76 90

300

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLMN-12-S25 GLMN-12-S25W

Round Weight 3kg

CAD Data GLMN-15-S25 GLMN-15-S25W

Gearmotor with Brake

Fig.A-150

GLMN-22-300900-S25 GLMN-22-300900-S25W

Fig.A-151

GLMN-28-12001800-S25 GLMN-28-12001800-S25W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

298 300

40 35
22h6

319 24.5 300

45 40
28h6

31

30 80 12 300 65 90 55

6 139 90 94

36.5 8 15 300 90 125 65 140 175 110 167


With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4-11

130 154

4-11

Round Weight 5kg

GLMN-22-S25 CAD Data GLMN-22-S25W

Round Weight 7kg

GLMN-28-S25 CAD Data GLMN-28-S25W

Standard Motors

Cautions for Safety

Option

A53

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 25W
Flange Mount Type Gearmotor with Brake
Fig.A-152
GFMN-12-5120-S25 GFMN-12-5120-S25W
Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-153

GFMN-15-160240-S25 GFMN-15-160240-S25W

200 300

22 20
12h6

35

300

209

27 24
15h6

40

11 80

21 4 76 13.5 43 94

13

5 17

25 51 90

300

3.5 27.5 4-6.5

32 76

32

9 300

4 33

4-6.5

38 90

38

Round Weight 2kg

GFMN-12-S25 CAD Data GFMN-12-S25W

Round Weight 3kg

GFMN-15-S25 CAD Data GFMN-15-S25W

Fig.A-154

GFMN-22-300900-S25 GFMN-22-300900-S25W
298

Fig.A-155

GFMN-28-12001800-S25 GFMN-28-12001800-S25W

40 35 300

319

45 40

300 30 80 22h6 148h7 6

24.5

185

82.5 36.5 89 94

170h7 28h6

31 8

215

93

105.5 4-11

300

12

4 47

4-11

164

300

15

4 50

186

Round Weight 5kg

GFMN-22-S25 CAD Data GFMN-22-S25W

Round Weight 7kg

GFMN-28-S25 CAD Data GFMN-28-S25W

Small Flange Mount Type Gearmotor with Brake


Fig.A-156
GKMN-22-300900-S25 GKMN-22-300900-S25W
298 300 30 80 24.5 300 4-8.6 61 140 61

Fig.A-157

GKMN-28-12001800-S25 GKMN-28-12001800-S25W
319 15

12

47 5 40 35 22h6 6
60h7

300 42 51 80 89 94 36.5

52 5 45 28h6 40 8
80h7

47.5

58.5

94.5 31 300 4-11 71 164 71 105.5

Round Weight 5kg

GKMN-22-S25 CAD Data GKMN-22-S25W

Round Weight 7kg

GKMN-28-S25 CAD Data GKMN-28-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A54

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A55

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 40W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

12 15
Standard Voltage (Continuous Rated 4 Poles)

0.67/0.80 0.61/0.66 0.63/0.64 0.67/0.80 0.61/0.66 0.61/0.66 0.34/0.33 0.29/0.34 0.31/0.32 0.34/0.33 0.29/0.34 0.29/0.34

1400/1650 1350/1650 1400/1650 1400/1650 1350/1650 1350/1650 1350/1600 1350/1600 1400/1650 1350/1600 1350/1600 1350/1600

12 10 10 12 10 10 2.5 2.5 2.5 2.5 2.5 2.5 E


Totally Enclosed or Totally Enclosed Fan-cooled

S40

100/100

50/60

18 22 28 32 12 15 18 22 28 32

40W

Double Voltage (Continuous Rated 4 Poles)

S40W

200/200

50/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 12 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1-phase 40W 15 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2

N m kgf m 0.88 1.37 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 137 0.09 0.14 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

N 98 196 245 343 441 490 539 588 637 686 980 980 1080 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 60 65 70 100 100 110 140 140 140 180 180 180 280 280 280 520 520 520

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A57 P.A58 Fig.A-158 Fig.A-164 2kg 2kg

P.A61 P.A60 Fig.A-173 Fig.A-179 2kg 2kg

1/ 100 1/ 120 1/ 160

P.A57 P.A58 Fig.A-159 Fig.A-165 3kg 3kg P.A57 P.A58 Fig.A-160 Fig.A-166 4kg 4kg

P.A61 P.A60 Fig.A-174 Fig.A-180 3kg 3kg P.A61 P.A60 Fig.A-175 Fig.A-181 4kg 4kg

18

1/ 200 1/ 240 1/ 300

22

1/ 375 1/ 450 1/ 600

P.A57 P.A58 P.A59 P.A60 P.A61 P.A62 Fig.A-161 Fig.A-167 Fig.A-170 Fig.A-176 Fig.A-182 Fig.A-185 5kg 5kg 5kg 5kg 5kg 5kg P.A57 P.A58 P.A59 P.A60 P.A61 P.A62 Fig.A-162 Fig.A-168 Fig.A-171 Fig.A-177 Fig.A-183 Fig.A-186 7kg 7kg 7kg 7kg 7kg 7kg P.A57 P.A58 P.A59 P.A60 P.A61 P.A62 Fig.A-163 Fig.A-169 Fig.A-172 Fig.A-178 Fig.A-184 Fig.A-187 11kg 11kg 11kg 11kg 11kg 11kg

28

1/ 750 1/ 900 1/1200

2.4 118 1.5 176 1.2 225 1 274

32

1/1500 1/1800

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A45.

A56

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 40W
Foot Mount Type Gearmotor
Fig.A-158
GLM-12-560-S40 GLM-12-560-S40W
Foot Mount type

Fig.A-159

GLM-15-80120-S40 GLM-15-80120-S40W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

200 300

22 20
12h6

172.5 300

27 24
15h6

11 80 7 35 50 35

4 84 13.5 55 90

13

5 97 8 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLM-12-S40 GLM-12-S40W

Round Weight 3kg

CAD Data GLM-15-S40 GLM-15-S40W

Fig.A-160

GLM-18-160240-S40 GLM-18-160240-S40W

Fig.A-161

GLM-22-300450-S40 GLM-22-300450-S40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

187.5 300

30 27 300
18h6

298

40 35
22h6

24.5

Gearmotor with Brake

15 106 10 40 60 47 6 20.5 113 75 80

30

6 139 12 90

With Waterresistant Brake Motor Speed Control Gearmotor

4-8.5

110 130

65 90

55

4-11

130 154

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Round Weight 4kg

GLM-18-S40 CAD Data GLM-18-S40W

Round Weight 5kg

GLM-22-S40 CAD Data GLM-22-S40W

Speed Control Gearmotor with Brake Technical Information

Fig.A-162

GLM-28-600900-S40 GLM-28-600900-S40W

Fig.A-163

GLM-32-12001800-S40 GLM-32-12001800-S40W

Standard Motors

282.5 300

45 40
28h6

313 31 300 41.5 8 167 110 90

55 50
32h6

35

Cautions for Safety

Option

36.5 90 15 90 125 65 140 175

10 18 130 168 70 170 208 130

198

4-11

4-13

Round Weight 7kg

GLM-28-S40 CAD Data GLM-28-S40W

Round Weight 11kg

GLM-32-S40 CAD Data GLM-32-S40W

A57

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 40W
Flange Mount Type Gearmotor
Fig.A-164
GFM-12-560-S40 GFM-12-560-S40W
Flange Mount type

Fig.A-165

GFM-15-80120-S40 GFM-15-80120-S40W

200 300

22 20
12h6

35

300

172.5

27 24
15h6

40

11 80

21 4 76 13.5 43 90

13

5 17

25 51 90

3.5 27.5 4-6.5

32 76

32

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD Data GFM-12-S40 GFM-12-S40W

Round Weight 3kg

CAD Data GFM-15-S40 GFM-15-S40W

Fig.A-166

GFM-18-160240-S40 GFM-18-160240-S40W

Fig.A-167

GFM-22-300450-S40 GFM-22-300450-S40W

300

187.5

298 30 27
18h6 47

40 35

300 29 6 20.5 59 106 80 30 22h6 148h7 6

15 106

24.5

185

82.5

89

10

5 37

4-8.5

44 106

44

12

4 47

4-11

164

Round Weight 4kg

GFM-18-S40 CAD Data GFM-18-S40W

Round Weight 5kg

GFM-22-S40 CAD Data GFM-22-S40W

Fig.A-168

GFM-28-600900-S40 GFM-28-600900-S40W

Fig.A-169

GFM-32-12001800-S40 GFM-32-12001800-S40W

282.5

45 40 300

313

55 50

300 36.5 90 170h7 28h6 8

31

215

93 41.5 105.5 90

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

GFM-28-S40 CAD Data GFM-28-S40W

Round Weight 11kg

GFM-32-S40 CAD Data GFM-32-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A58

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mount Type Gearmotor


Fig.A-170
GKM-22-300450-S40 GKM-22-300450-S40W

Fig.A-171

GKM-28-600900-S40 GKM-28-600900-S40W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

298 12 300 30 80

47 5 40 35 22h6 6
60h7

282.5 15 300 42 51 80 89 90 36.5

52 5 45 40 28h6 8
80h7

47.5

58.5

94.5 31 4-11 71 164 71 105.5

24.5 4-8.6 61 140 61

Round Weight 5kg

GKM-22-S40 CAD Data GKM-22-S40W

Round Weight 7kg

GKM-28-S40 CAD Data GKM-28-S40W

Gearmotor with Brake

Fig.A-172

GKM-32-12001800-S40 GKM-32-12001800-S40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

313 15 300 41.5 90

63 5 55 50 32h6 10
88h7

71.5 58.5 113.5 35 126.5 86 198

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-13

86

Round Weight 11kg

GKM-32-S40 CAD Data GKM-32-S40W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A59

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.A-173
GLMN-12-560-S40 GLMN-12-560-S40W
Foot Mount type

Fig.A-174

GLMN-15-80120-S40 GLMN-15-80120-S40W

200 300

22 20
12h6

209 300

27 24
15h6

11 80 7 300 35 50 35

4 84 13.5 55 94

13

5 99 8 17 65

4-6.5

76 90

300

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLMN-12-S40 GLMN-12-S40W

Round Weight 3kg

CAD Data GLMN-15-S40 GLMN-15-S40W

Fig.A-175

GLMN-18-160240-S40 GLMN-18-160240-S40W

Fig.A-176

GLMN-22-300450-S40 GLMN-22-300450-S40W

224.5 300

30 27 300
18h6

298

40 35
22h6

24.5

15 110 10 300 40 60 47

6 20.5 75 115 80

30

6 139 12 90

4-8.5

110 130

300

65 90

55

4-11

130 154

Round Weight 4kg

GLMN-18-S40 CAD Data GLMN-18-S40W

Round Weight 5kg

GLMN-22-S40 CAD Data GLMN-22-S40W

Fig.A-177

GLMN-28-600900-S40 GLMN-28-600900-S40W

Fig.A-178

GLMN-32-12001800-S40 GLMN-32-12001800-S40W

319 300

45 40
28h6

349.5 31 300

55 50
32h6

35

36.5 94 15 300 90 125 65 140 175 8 110 167 94

41.5 10 18 300 130 168 70 170 208 198 130

4-11

4-13

Round Weight 7kg

GLMN-28-S40 CAD Data GLMN-28-S40W

Round Weight 11kg Option P.E110

GLMN-32-S40 CAD Data GLMN-32-S40W

A60

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor with Brake


Fig.A-179
GFMN-12-560-S40 GFMN-12-560-S40W

Fig.A-180

GFMN-15-80120-S40 GFMN-15-80120-S40W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200 300

22 20 12h6 11 4

300 35 21 76 13.5 43 94

209

27 24
15h6

40

13

5 17

25 51 90

80

300

3.5 27.5 4-6.5

32 76

32 300

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD Data GFMN-12-S40 GFMN-12-S40W

Round Weight 3kg

CAD Data GFMN-15-S40 GFMN-15-S40W

Fig.A-181

GFMN-18-160240-S40 GFMN-18-160240-S40W

Fig.A-182

GFMN-22-300450-S40 GFMN-22-300450-S40W
298

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

300

224.5

30 27
18h6

40 35

47

300 15 110 29 6 20.5 10 300 5 37 44 106 44 59 106 80 30 22h6 148h7 6

24.5

185

82.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

89

300

12

4 47

4-11

4-8.5

164

Round Weight 4kg

CAD Data GFMN-18-S40 GFMN-18-S40W

Round Weight 5kg

CAD Data GFMN-22-S40 GFMN-22-S40W

Speed Control Gearmotor with Brake Technical Information

Fig.A-183

GFMN-28-600900-S40 GFMN-28-600900-S40W
319

Fig.A-184

GFMN-32-12001800-S40 GFMN-32-12001800-S40W
349.5

Standard Motors

45 40 300

55 50

Cautions for Safety

300 36.5 94 170h7 28h6 8

31

215

93 41.5 105.5 94

180h7 32h6

35 10

250

107.5

Option

126.5 4- 13

300

15

4 50

4-11

186

300

15

4 60

215

Round Weight 7kg

GFMN-28-S40 CAD Data GFMN-28-S40W

Round Weight 11kg

GFMN-32-S40 CAD Data GFMN-32-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A61

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 40W
Small Flange Mount Type Gearmotor with Brake
Fig.A-185
GKMN-22-300450-S40 GKMN-22-300450-S40W
Small Flange Mount type (Frame Number 2232)

Fig.A-186

GKMN-28-600900-S40 GKMN-28-600900-S40W

298 300

12

47 5 40 35 22h6 6 42 51 80 89 94
60h7

319 15 300 36.5

52 5 45 28h6 40 8
80h7

30 80

47.5

58.5

94.5 31 300 4-11 71 164 71 105.5

24.5 300 4-8.6 61 140 61

Round Weight 5kg

CAD Data GKMN-22-S40 GKMN-22-S40W

Round Weight 7kg

GKMN-28-S40 CAD Data GKMN-28-S40W

Fig.A-187

GKMN-32-12001800-S40 GKMN-32-12001800-S40W

349.5 15 300 41.5 94

63 5 55 50 32h6
88h7

10

71.5 58.5 113.5 35 126.5 86 198

300 4-13 86

Round Weight 11kg

CAD Data GKMN-32-S40 GKMN-32-S40W

A62

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A63

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 60W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15 18
Standard Voltage (Continuous Rated 4 Poles)

0.90/1.00 0.90/1.00 0.90/1.10 0.90/1.00 0.90/1.00 0.45/0.48 0.42/0.45 0.43/0.50 0.45/0.48 0.45/0.48

1350/1600 1400/1650 1300/1500 1350/1600 1350/1600 1350/1600 1400/1650 1300/1500 1350/1600 1350/1600

15 15 15 15 15 3.5 3.5 3.5 3.5 3.5 E


Totally Enclosed or Totally Enclosed Fan-cooled

S60

100/100

50/60

22 28 32 15 18

60W

Double Voltage (Continuous Rated 4 Poles)

S60W

200/200

50/60

22 28 32

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1-phase 60W 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2

N m kgf m 1.37 2.06 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 216 0.14 0.21 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

N 98 196 245 343 441 490 539 784 882 882 1270 1270 1370 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 80 90 90 130 130 140 140 140 140 180 180 180 280 280 280 520 520 520

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A65 P.A66 Fig.A-188 Fig.A-193 3kg 3kg

P.A69 P.A68 Fig.A-201 Fig.A-206 3kg 3kg

1/ 100 18 1/ 120 1/ 160 1/ 200


1/ 240

P.A65 P.A66 Fig.A-189 Fig.A-194 4kg 4kg

P.A69 P.A68 Fig.A-202 Fig.A-207 4kg 4kg

1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.A65 P.A66 P.A67 P.A68 P.A69 P.A70 Fig.A-190 Fig.A-195 Fig.A-198 Fig.A-203 Fig.A-208 Fig.A-211 5kg 5kg 5kg 5kg 5kg 5kg P.A65 P.A66 P.A67 P.A68 P.A69 P.A70 Fig.A191 Fig.A-196 Fig.A-199 Fig.A-204 Fig.A-209 Fig.A-212 7kg 7kg 7kg 7kg 7kg 7kg P.A65 P.A66 P.A67 P.A68 P.A69 P.A70 Fig.A-192 Fig.A-197 Fig.A-200 Fig.A-205 Fig.A-210 Fig.A-213 11kg 11kg 11kg 11kg 11kg 11kg

2.4 176 1.5 284 1.2 353 1 421

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A45.

A64

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
Foot Mount Type Gearmotor
Fig.A-188
GLM-15-560-S60 GLM-15-560-S60W
Foot Mount type

Fig.A-189

GLM-18-80240-S60 GLM-18-80240-S60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

209 300

27 24
15h6

300

187.5

30 27
18h6

13 94 8 40 56 41

5 99 17 65

15 106 10 40 60 47 6 20.5 113 75

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLM-15-S60 GLM-15-S60W

Round Weight 4kg

CAD Data GLM-18-S60 GLM-18-S60W

Fig.A-190

GLM-22-300450-S60 GLM-22-300450-S60W

Fig.A-191

GLM-28-600900-S60 GLM-28-600900-S60W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

298 300

40 35
22h6

319 24.5 300

45 40
28h6

31

Gearmotor with Brake

30 80 12 65 90 55

6 139 90 94

36.5 8 15 90 125 65 140 175 110 167

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-11

130 154

4-11

Round Weight 5kg

GLM-22-S60 CAD Data GLM-22-S60W

Round Weight 7kg

GLM-28-S60 CAD Data GLM-28-S60W

Speed Control Gearmotor with Brake Technical Information

Fig.A-192

GLM-32-12001800-S60 GLM-32-12001800-S60W

Standard Motors

349.5

55 50
32h6

35

Cautions for Safety

300 41.5 94 18 130 168 70

Option

10

198 130

4-13

170 208

Round Weight 11kg

CAD Data GLM-32-S60 GLM-32-S60W

A65

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 60W
Flange Mount Type Gearmotor
Fig.A-193
GFM-15-560-S60 GFM-15-560-S60W
Flange Mount type

Fig.A-194

GFM-18-80240-S60 GFM-18-80240-S60W

300

209

27 24
15h6

40

300

187.5

30 27
18h6

47

13 94

5 17

25 51 90 106

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

CAD Data GFM-15-S60 GFM-15-S60W

Round Weight 4kg

CAD Data GFM-18-S60 GFM-18-S60W

Fig.A-195

GFM-22-300450-S60 GFM-22-300450-S60W

Fig.A-196

GFM-28-600900-S60 GFM-28-600900-S60W

298

40 35 300

319

45 40

300 30 80 22h6 148h7 6

24.5

185

82.5 36.5 89 94

170h7 28h6

31 8

215

93

105.5 4-11

12

4 47

4-11

164

15

4 50

186

Round Weight 5kg

GFM-22-S60 CAD Data GFM-22-S60W

Round Weight 7kg

GFM-28-S60 CAD Data GFM-28-S60W

Fig.A-197

GFM-32-12001800-S60 GFM-32-12001800-S60W

349.5

55 50

300 41.5 94 180h7 32h6 10

35

250

107.5

126.5 4- 13

15

4 60

215

Round Weight 11kg

GFM-32-S60 CAD Data GFM-32-S60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A66

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mount Type Gearmotor


Fig.A-198
GKM-22-300450-S60 GKM-22-300450-S60W

Fig.A-199

GKM-28-600900-S60 GKM-28-600900-S60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

298 12 300 30 80 24.5 4-8.6 61 140 61 47 5 40 35 22h6 6


60h7

319 15 300 42 51 80 89 94 31 4-11 71 164 71 36.5 52 5 45 28h6 40 8


80h7

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

47.5

58.5

94.5 105.5

Round Weight 5kg

CAD Data GKM-22-S60 GKM-22-S60W

Round Weight 7kg

GKM-28-S60 CAD Data GKM-28-S60W

Fig.A-200

GKM-32-12001800-S60 GKM-32-12001800-S60W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

349.5 15 300 41.5 94 35 4-13 86 198 86 63 5 55 50 32h6


88h7

Gearmotor with Brake

10

71.5 58.5 113.5 126.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Round Weight 11kg

CAD Data GKM-32-S60 GKM-32-S60W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A67

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 60W
Foot Mount Type Gearmotor with Brake
Fig.A-201
GLMN-15-560-S60 GLMN-15-560-S60W
Foot Mount type

Fig.A-202

GLMN-18-80240-S60 GLMN-18-80240-S60W

209 300

27 24
15h6

224.5 300

30 27
18h6

13 94 8 300 40 56 41

5 99 17 65

15 110 10 300 40 60 47

6 20.5 75 115

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

GLMN-15-S60 CAD Data GLMN-15-S60W

Round Weight 4kg

GLMN-18-S60 CAD Data GLMN-18-S60W

Fig.A-203

GLMN-22-300450-S60 GLMN-22-300450-S60W

Fig.A-204

GLMN-28-600900-S60 GLMN-28-600900-S60W

298 300

40 35
22h6

319 24.5 300

45 40
28h6

31

30 80 12 300 65 90 55

6 139 90 94

36.5 8 15 300 90 125 65 140 175 110 167

4-11

130 154

4-11

Round Weight 5kg

CAD Data GLMN-22-S60 GLMN-22-S60W

Round Weight 7kg

CAD Data GLMN-28-S60 GLMN-28-S60W

Fig.A-205

GLMN-32-12001800-S60 GLMN-32-12001800-S60W

349.5

55 50
32h6

35

300 41.5 94 18 300 130 168 70

10

198 130

4-13

170 208

Round Weight 11kg

CAD Data GLMN-32-S60 GLMN-32-S60W

A68

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor with Brake


Fig.A-206
GFMN-15-560-S60 GFMN-15-560-S60W

Fig.A-207

GFMN-18-80240-S60 GFMN-18-80240-S60W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

300

209

27 24
15h6

300
40

224.5

30 27
18h6

47

13 94

5 17

25 51 90 110

15

29 6 20.5 59 106

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

9 300

4 33

4-6.5

38 90

38

10 300

5 37

4-8.5

44 106

44

Round Weight 3kg

GFMN-15-S60 CAD Data GFMN-15-S60W

Round Weight 4kg

GFMN-18-S60 CAD Data GFMN-18-S60W

Fig.A-208

GFMN-22-300450-S60 GFMN-22-300450-S60W
298

Fig.A-209

GFMN-28-600900-S60 GFMN-28-600900-S60W
319

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

40 35 300

45 40

300 30 80 22h6 148h7 6

24.5

185

82.5 36.5 89 94

170h7 28h6

31 8

215

93

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

105.5 4-11

300

12

4 47

4-11

164

300

15

4 50

186

Round Weight 5kg

GFMN-22-S60 CAD Data GFMN-22-S60W

Round Weight 7kg

GFMN-28-S60 CAD Data GFMN-28-S60W

Speed Control Gearmotor with Brake Technical Information

Fig.A-210

GFMN-32-12001800-S60 GFMN-32-12001800-S60W

Standard Motors

349.5

55 50

Cautions for Safety

300 41.5 94 180h7 32h6 10

35

Option

250

107.5

126.5 4- 13

300

15

4 60

215

Round Weight 11kg

CAD Data GFMN-32-S60 GFMN-32-S60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A69

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 60W
Small Flange Mount Type Gearmotor with Brake
Fig.A-211
GKMN-22-300450-S60 GKMN-22-300450-S60W
Small Flange Mount type (Frame Number 2232)

Fig.A-212

GKMN-28-600900-S60 GKMN-28-600900-S60W

298 12 300 30 80 24.5 300 4-8.6 61 140 61 47 5 40 35 22h6 6


60h7

319 15 300 42 51 80 89 94 31 300 4-11 71 164 71 36.5 52 5 45 28h6 40 8


80h7

47.5

58.5

94.5 105.5

Round Weight 5kg

GKMN-22-S60 CAD Data GKMN-22-S60W

Round Weight 7kg

GKMN-28-S60 CAD Data GKMN-28-S60W

Fig.A-213

GKMN-32-12001800-S60 GKMN-32-12001800-S60W
349.5 15 63 5 55 50 32h6
88h7

300 41.5 94

10

71.5 58.5 113.5 35 126.5 86 198

300 4-13 86

Round Weight 11kg

CAD Data GKMN-32-S60 GKMN-32-S60W

A70

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A71

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 90W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15 18
Standard Voltage (Continuous Rated 4 Poles)

1.30/1.40 1.20/1.40 1.30/1.40 1.30/1.40 1.20/1.40 0.65/0.66 0.59/0.65 0.65/0.66 0.65/0.66 0.59/0.65

1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1400/1650 1350/1600 1350/1600 1400/1650

20 20 20 20 20 5 5 5 5 5 E
Totally Enclosed Fan-cooled

S90

100/100

50/60

28 32 40 15 18

90W

Double Voltage (Continuous Rated 4 Poles)

S90W

200/200

50/60

28 32 40

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 15 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1-phase 90W 18 5 7.5 10 15 20 25 30 40 50 60 80 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m kgf m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

N 147 245 343 441 539 588 686 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 15 25 35 45 55 60 70 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

GLM

GFM

GKM

GLMN

GFMN

GKMN

P.A73 P.A74 Fig.A-214 Fig.A-219 3kg 3kg

P.A77 P.A76 Fig.A-226 Fig.A-231 3kg 3kg

1/ 100 1/ 120
1/ 160 1/ 200 1/ 240

P.A73 P.A74 Fig.A-215 Fig.A-220 4kg 4kg

P.A77 P.A76 Fig.A-227 Fig.A-232 4kg 4kg

1/ 300 28 1/ 375 1/ 450 1/ 600 32 1/ 750 1/ 900 1/1200 40 1/1500 1/1800

P.A73 P.A74 P.A75 P.A76 P.A77 P.A77 Fig.A-216 Fig.A-221 Fig.A-224 Fig.A-228 Fig.A-233 Fig.A-236 7kg 7kg 7kg 7kg 7kg 7kg P.A73 P.A74 P.A75 P.A76 P.A77 P.A77 Fig.A-217 Fig.A-222 Fig.A-225 Fig.A-229 Fig.A-234 Fig.A-237 11kg 11kg 11kg 11kg 11kg 11kg P.A73 P.A74 Fig.A-218 Fig.A-223 15kg 15kg P.A76 P.A77 Fig.A-230 Fig.A-235 15kg 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A45.

A72

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 90W
Foot Mount Type Gearmotor
Fig.A-214
GLM-15-530-S90 GLM-15-530-S90W
Foot Mount type

Fig.A-215

GLM-18-40240-S90 GLM-18-40240-S90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

209 300

27 24
15h6

224.5 300

30 27
18h6

13 94 8 40 56 41

5 99 17 65

15 110 10 40 60 47

6 20.5 75 115

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLM-15-S90 GLM-15-S90W

Round Weight 4kg

CAD Data GLM-18-S90 GLM-18-S90W

Fig.A-216

GLM-28-300450-S90 GLM-28-300450-S90W

Fig.A-217

GLM-32-600900-S90 GLM-32-600900-S90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

319 300

45 40
28h6

349.5 31 300 41.5 8 167 110 94

55 50
32h6

35

Gearmotor with Brake

36.5 94 15 90 125 65 140 175

10 18 130 168 70 170 208

198 130

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-11

4-13

Round Weight 7kg

CAD Data GLM-28-S90 GLM-28-S90W

Round Weight 11kg

CAD Data GLM-32-S90 GLM-32-S90W

Speed Control Gearmotor with Brake Technical Information

Fig.A-218

GLM-40-12001800-S90 GLM-40-12001800-S90W

Standard Motors

394

65 60
40h6

Cautions for Safety

43
Option

300 49 110 20 150 196 90

12

230 150

4-15

210 254

Round Weight 15kg

GLM-40-S90 CAD Data GLM-40-S90W

A73

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
G-Type Parallel Shaft1-Phase 90W
Flange Mount Type Gearmotor
Fig.A-219
GFM-15-530-S90 GFM-15-530-S90W
Flange Mount type

Fig.A-220

GFM-18-40240-S90 GFM-18-40240-S90W

300

209

27 24
15h6

40

300

224.5

30 27
18h6

47

13 94

5 17

25 51 90 110

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

GFM-15-S90 CAD Data GFM-15-S90W

Round Weight 4kg

GFM-18-S90 CAD Data GFM-18-S90W

Fig.A-221

GFM-28-300450-S90 GFM-28-300450-S90W

Fig.A-222

GFM-32-600900-S90 GFM-32-600900-S90W

319

45 40 300

349.5

55 50

300 36.5 94 170h7 28h6 8

31

215

93 41.5 105.5 94

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

GFM-28-S90 CAD Data GFM-28-S90W

Round Weight 11kg

GFM-32-S90 CAD Data GFM-32-S90W

Fig.A-223

GFM-40-12001800-S90 GFM-40-12001800-S90W

394

65 60

300 230h7 49 110 40h6 12

43

310

135

149 4-18

18

5 71

270

Round Weight 15kg

CAD Data GFM-40-S90 GFM-40-S90W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A74

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mount Type Gearmotor


Fig.A-224
GKM-28-300450-S90 GKM-28-300450-S90W

Fig.A-225

GKM-32-600900-S90 GKM-32-600900-S90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

319 15 300 36.5 94 31 4-11 71 164 71 52 5 45 28h6 40 8


80h7

349.5 15 300 47.5 58.5 41.5 94 35 4-13 86 198 86 63 5 55 50 32h6


88h7

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

10

71.5 58.5 113.5 126.5

94.5 105.5

Round Weight 7kg

CAD Data GKM-28-S90 GKM-28-S90W

Round Weight 11kg

CAD Data GKM-32-S90 GKM-32-S90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A75

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 90W
Foot Mount Type Gearmotor with Brake
Fig.A-226
GLMN-15-530-S90 GLMN-15-530-S90W
Foot Mount type

Fig.A-227

GLMN-18-40240-S90 GLMN-18-40240-S90W

209 300

27 24
15h6

224.5 300

30 27
18h6

13 94 8 300 40 56 41

5 99 17 65

15 110 10 300 40 60 47

6 20.5 75 115

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLMN-15-S90 GLMN-15-S90W

Round Weight 4kg

CAD Data GLMN-18-S90 GLMN-18-S90W

Fig.A-228

GLMN-28-300450-S90 GLMN-28-300450-S90W

Fig.A-229

GLMN-32-600900-S90 GLMN-32-600900-S90W

319 300

45 40
28h6

349.5 31 300 41.5 8 167 110 94

55 50
32h6

35

36.5 94 15 300 90 125 65 140 175

10 18 300 130 168 70 170 208

198 130

4-11

4-13

Round Weight 7kg

CAD Data GLMN-28-S90 GLMN-28-S90W

Round Weight 11kg

CAD Data GLMN-32-S90 GLMN-32-S90W

Fig.A-230

GLMN-40-12001800-S90 GLMN-40-12001800-S90W

394

65 60
40h6

43

300 49 110 20 300 150 196 90

12

230 150

4-15

210 254

Round Weight 15kg

CAD Data GLMN-40-S90 GLMN-40-S90W

A76

Model Code P.A6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Flange Mount Type Gearmotor with Brake


Fig.A-231
300

Flange Mount type

GFMN-15-530-S90 GFMN-15-530-S90W
209 27 24 15h6 13 5 17 9 300 4 33 38 90 38 40 25 51 90

Fig.A-232
300

GFMN-18-40240-S90 GFMN-18-40240-S90W
224.5 30 27 18h6 15 47 29 6 20.5 10 300 5 37 44 106 44 59 106

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

94

110

4-6.5

4- 8.5

Round Weight 3kg

CAD Data GFMN-15-S90 GFMN-15-S90W

Round Weight 4kg

CAD Data GFMN-18-S90 GFMN-18-S90W

Fig.A-233

GFMN-28-300450-S90 GFMN-28-300450-S90W
319 45 40 31 8

Fig.A-234

GFMN-32-600900-S90 GFMN-32-600900-S90W
349.5 55 50 35 10

300 36.5 94 300 15 4 50


170h7 28h6

300
21

With Waterresistant Brake Motor

93 41.5 105.5 94

180h7 32h6

25

0 107.5
Speed Control Gearmotor

126.5 4-13
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

4-11

186

300

15

4 60

215

Round Weight 7kg

CAD Data GFMN-28-S90 GFMN-28-S90W

Round Weight 11kg

GFMN-32-S90 CAD Data GFMN-32-S90W

Fig.A-235

GFMN-40-12001800-S90 GFMN-40-12001800-S90W
394 65 60 43 12

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

300 49 110 300 18 5 71


230h7 40h6

31

135

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

149 4-18

270

Round Weight 15kg

CAD Data GFMN-40-S90 GFMN-40-S90W

Small Flange Mount Type Gearmotor with Brake


Fig.A-236
GKMN-28-300450-S90 GKMN-28-300450-S90W
319 15 300 36.5 94 31 300 4-11 71 164 71 52 5 45 28h6 40 8
80h7

Standard Motors

Fig.A-237
300 47.5 58.5

GKMN-32-600900-S90 GKMN-32-600900-S90W
349.5 15 63 5 55 50 32h6
88h7

Cautions for Safety

Option

10

41.5 94

71.5 58.5 113.5 35 126.5 86 198

94.5 105.5

300 4-13 86

Round Weight 7kg

GKMN-28-S90 CAD Data GKMN-28-S90W

Round Weight 11kg

GKMN-32-S90 CAD Data GKMN-32-S90W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A77

A78

Parallel Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


ModelType Designation Standard Model Lineup

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start Totally Enclosed 4 Continuous Rating Helical gear

1-Phase
15W60W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) SUS420J2 Aluminium die-cast 1040 100% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

A79

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity Auxiliary Mark

G-TypeParallel Shaft IP-65 Water-Resistant

G-Type Water-resistant(IP65) Gearmotor/Brake Motor are classified by codes as shown below. Specify these codes in your inquiry and order.
Spec. Designation

G G

L F

W V

12 18

50 200

G L F W V

T25 S90

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: G-Type Parallel Shaft : Foot Mount : Flange Mount With Water-resistant IP65 Motor Output Shaft material:SUS420J2 : With Water-resistant IP65 Brake Motor Output Shaft material:SUS420J2

Output Shaft Diameter 5 : 15 240 : 1240 T15 T25 T40 T60 T90 S15 S25 S40 S60 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W

Motor Designation and Capacity or Standard Volatage/ Frequency

Standard Volatage/Frequency 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz Auxiliary Mark Spec. Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position Indicator for cab tyre cable Refer to the indication mark list in P. E54 for details.

A80

Model and Type Designation

Standard Model Lineup


Foot Mount type Flange Mount type

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/5 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 15W 12 1-Phase 15W

1/40

1/100 1/120 1/160

1/200 1/240 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

3-Phase 25W 1-Phase 25W

12 15

1/100 1/120

1/160 1/200 1/240 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

12 3-Phase 40W 15 18 Gearmotor GLW GFW Gearmotor with Brake GLV GFV 1-Phase 40W 18 15

1/80

1/100 1/120

1/160 1/200 1/240 1/5 1/40 1/80 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30
With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120

1/160 1/200 1/240 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

15 3-Phase 60W 18

1/80 1/5

1/100 1/120 1/160 1/200 1/240 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

1-Phase 60W

18

1/40 1/80 1/5

1/100 1/120 1/160 1/200 1/240 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

3-Phase 90W

18

1/40

1/100 1/120 1/160

Speed Control Gearmotor with Brake Technical Information

1/200 1/240

Standard Motors

Note 190W 1ph is not available. 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Cautions for Safety

Option

Water-resistant gearmotors with the motor capacity of more than 0.1kW are also available. For details, refer to the catalogue of Midi Sereies.

A81

A82

Parallel Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired according to the diagram shown on page E44, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A83

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

15W

T15

200/200/220

50/60/60

12

0.14/0.13/0.13

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 98 196 245 343 441 490 539 588 637 686 735 735 784 784 784 784

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 80 80 80

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 3-phase 15W 12 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240

P.A85 P.A85 P.A85 P.A85 Fig.A-238 Fig.A-239 Fig.A-240 Fig.A-241 2kg 2kg 2kg 2kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A83.

A84

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Foot Mount type

Foot Mount Type Gearmotor


Fig.A-238
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 22 20 12h6 76 11 4 82 7 55 9.5 35 50 35 4-6.5 76 90 22

Flange Mount Type Gearmotor


Fig.A-239
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 8 3.5 22 20 46

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GLW-12-5240-T15

GFW-12-5240-T15

13.5 103

59 76

11

13.5 12h635 4 64 76

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

9.5

4-6.5

64 76

Round Weight 2kg

CAD Data GLW-12-T15

Round Weight 2kg

CAD Data GFW-12-T15

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.A-240
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 22 20 12h6 61.5 76 11 4 7 55 35 50 35 4-6.5 76 90 82 46

Flange Mount Type Gearmotor with Brake


Fig.A-241
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 8 3.5 22 20 11 76

GLV-12-5240-T15

GFV-12-5240-T15

46

With Waterresistant Brake Motor Speed Control Gearmotor

13.5 103

59 61.5

13.5 12h6 35 4 64 76

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

4-6.5

64 76

Round Weight 2kg

CAD Data GLV-12-T15

Round Weight 2kg

CAD Data GFV-12-T15


Technical Information

Standard Motors

Cautions for Safety

Option

A85

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

25W

T25

200/200/220

50/60/60

12 15

0.21/0.19/0.19 0.18/0.17/0.17

1350/1550/1600 1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 12 3-phase 25W 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240

P.A86 P.A87 P.A87 P.A87 Fig.A-242 Fig.A-244 Fig.A-246 Fig.A-248 2kg 2kg 2kg 2kg

P.A86 P.A87 P.A87 P.A87 Fig.A-243 Fig.A-245 Fig.A-247 Fig.A-249 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A83.

Foot Mount Type Gearmotor


Fig.A-242
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 22 20 12h6 76 11 4 82 7 55 9.5 35 50 35 4-6.5 76 90 7.5 40 56 41 4-6.5 90 104 22

GLW-12-5120-T25

Fig.A-243
Cab tyre cable 7.6 2000mm

GLW-15-160240-T25

186.5 153.5 34

33 27 24 15h6

46 17 5 8 65 97 117.5

13.5 103 90 13

Round Weight 2kg

CAD Data GLW-12-T25

Round Weight 3kg

CAD Data GLW-15-T25

A86

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Foot Mount type

Flange Mount Type Gearmotor


Fig.A-244
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 8 3.5 22 20 34 46

Parallel Shaft Performance Table/ Dimension

GFW-12-5120-T25

Fig.A-245
Cab tyre cable 7.6 2000mm

GFW-15-160240-T25

Gearmotor with Brake Waterresistant Gearmotor with Brake

186.5 153.5

33 4 27 24

46 17

Speed Control Gearmotor Gearmotor with Clutch /Brake

59 76

11

13.5 12h6 35 4 64 76

65.5 90 13 15h6 40 5

76 90

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

9.5

4-6.5

64 76

7.5

4-6.5

76 90

Round Weight 2kg

CAD Data GFW-12-T25

Round Weight 3kg

CAD Data GFW-15-T25

Foot Mount Type Gearmotor with Brake


Fig.A-246
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 23.5 22 20 12h6 61.5 76 11 4 7 55 35 50 35 4-6.5 76 90 82 46 34

With Waterresistant Brake Motor Speed Control Gearmotor

GLV-12-5120-T25

Fig.A-247
Cab tyre cable 7.7 2000mm

GLV-15-160240-T25

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

210 177 33 27 24 15h6 103 77 90 13 5 97 8 65 40 56 41 90 104 46 17 117.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

13.5

4-6.5

Round Weight 2kg

CAD Data GLV-12-T25

Round Weight 3kg

CAD Data GLV-15-T25

Flange Mount Type Gearmotor with Brake


Fig.A-248
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 8 3.5 22 20 11 76

GFV-12-5120-T25

Fig.A-249
Cab tyre cable 7.7 2000mm 23.5 46

GFV-15-160240-T25

Standard Motors

Cautions for Safety

210 177 34

33 4 27 24

Option

46 17

59 61.5

13.5 12h6 35 4 64 76

65.5 77 90 13 15h6 40 5

76 90

4-6.5

64 76

4-6.5

76 90

Round Weight 2kg

CAD Data GFV-12-T25

Round Weight 3kg

CAD Data GFV-15-T25

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A87

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 40W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

12
Standard Voltage (Continuous Rated 4 Poles)

0.29/0.27/0.27 0.27/0.26/0.26 0.21/0.21/0.21

1350/1550/1600 1350/1550/1550 1350/1550/1600 E


Totally Enclosed non-ventilated

40W

T40

200/200/220

50/60/60

15 18

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.88 1.37 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.09 0.14 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 98 196 245 343 441 490 539 588 637 686 980 980 1080 1370 1370 1370

kgf 10 20 25 35 45 50 55 60 65 70 100 100 110 140 140 140

GLW

GFW

GLV

GFV

1/ 10 1/ 15 12 1/ 20 1/ 25 1/ 30 3-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 15 1/100 1/120 1/160 18 1/200 1/240

P.A89 P.A89 P.A90 P.A90 Fig.A-250 Fig.A-253 Fig.A-256 Fig.A-259 2kg 2kg 2kg 2kg

P.A89 P.A89 P.A90 P.A90 Fig.A-251 Fig.A-254 Fig.A-257 Fig.A-260 3kg 3kg 3kg 3kg P.A89 P.A89 P.A90 P.A90 Fig.A-252 Fig.A-255 Fig.A-258 Fig.A-261 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A83.

A88

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Water-Resistant Gearmotor
Foot Mount Type Gearmotor
Fig.A-250
7.6 2000mm Foot Mount type Flange Mount type

GLW-12-560-T40

Fig.A-251
7.6 2000mm

GLW-15-80120-T40
186.5 153.5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Cab tyre cable 176 148.5 27.5 22 20 11


12h6

Cab tyre cable 33 27 24


15h6

34

22 13.5 4 7 55 103 82

34

46 17 5 8 65 117.5 97

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

76

90

13

9.5

35 50

35

4-6.5

76 90

7.5

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLW-12-T40

Round Weight 3kg

CAD Data GLW-15-T40

Fig.A-252
7.6 2000mm

GLW-18-160240-T40

Cab tyre cable 201.5 164.5 34 15 106 37 30 27


18h6

46 20.5 6 113130.5 10 75 110 130

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

7.5

40 60

47

4-8.5

Round Weight 4kg

CAD Data GLW-18-T40

Flange Mount Type Gearmotor


Fig.A-253
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 8 3.5 22 20 11 76

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

GFW-12-560-T40

Fig.A-254
7.6 2000mm

GFW-15-80120-T40
186.5 153.5

Cab tyre cable 33 4 27 24


15h640

46 13.5
12h635

34

46 17

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

59

65.5 64 76 90 13 5

76 90

9.5

4-6.5

64 76

7.5

4-6.5

76 90
Standard Motors

Round Weight 2kg

CAD Data GFW-12-T40

Round Weight 3kg

CAD Data GFW-15-T40

Fig.A-255
7.6 2000mm

Cautions for Safety

GFW-18-160240-T40
Option

Cab tyre cable 201.5 164.5 37 10 5 30 27


18h647

34

46 20.5 6 88 106

70.5 106

15

7.5

4-8.5

88 106

Round Weight 4kg

CAD Data GFW-18-T40

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A89

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Water-Resistant Gearmotor with Brake


G-Type Parallel Shaft3-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.A-256
22 34
Foot Mount type Flange Mount type

GLV-12-560-T40
27.5

Fig.A-257
23.5 46

GLV-15-80120-T40
33 27 24
15h6

198 170.5 Cab tyre cable 7.7 2000mm

22 20
12h6

210 177 Cab tyre cable 34 7.7 2000mm

46 17 5 8 65 117.5 97

13.5 4 7 55 103 82
77

61.5

76

11

90

13

35 50

35

4-6.5

76 90

40 56

41

4-6.5

90 104

Round Weight 2kg

CAD Data GLV-12-T40

Round Weight 3kg

CAD Data GLV-15-T40

Fig.A-258

GLV-18-160240-T40
37 30 27
18h6

225 188 23.5 Cab tyre cable 34 7.7 2000mm 15


77

46 20.5 6 130.5 113 10 75 110 130

106

40 60

47

4-8.5

Round Weight 4kg

CAD Data GLV-18-T40

Flange Mount Type Gearmotor with Brake


Fig.A-259
22

GFV-12-560-T40
27.5 8 3.5 22 20 11 76

Fig.A-260
46 13.5 65.5 64 76
77

GFV-15-80120-T40
33 4 27 24
15h640

198 170.5 34 Cab tyre cable 7.7 2000

210 177 23.5 34 Cab tyre cable 7.7 2000

46 17

59
61.5

12h635

90

13

76 90

4-6.5

64 76

4-6.5

76 90

Round Weight 2kg

CAD Data GFV-12-T40

Round Weight 3kg

CAD Data GFV-15-T40

Fig.A-261

GFV-18-160240-T40

225 37 188 10 5 23.5 34 Cab tyre cable 30 7.7 2000 27 70.5


77

46 20.5
18h647

15 106

88 106

4-8.5

88 106

Round Weight 4kg

CAD Data GFV-18-T40

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A90

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A91

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

60W

T60

200/200/220

50/60/60

15 18

0.40/0.36/0.36 0.33/0.33/0.33

1350/1550/1600 1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.37 2.06 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.14 0.21 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 98 196 245 343 441 490 539 784 882 882 1270 1270 1370 1370 1370 1370

kgf 10 20 25 35 45 50 55 80 90 90 130 130 140 140 140 140

GLW

GFW

GLV

GFV

1/ 10 1/ 15 15 1/ 20 1/ 25 1/ 30 3-phase 60W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 18 1/120 1/160 1/200


1/240

P.A92 P.A93 P.A93 P.A93 Fig.A-262 Fig.A-264 Fig.A-266 Fig.A-268 3kg 3kg 3kg 3kg

P.A92 P.A93 P.A93 P.A93 Fig.A-263 Fig.A-265 Fig.A-267 Fig.A-269 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A83.

Foot Mount Type Gearmotor


Fig.A-262
Cab tyre cable 7.6 2000mm 186.5 153.5 34 33 27 24 15h6 90 13 5 8 65 7.5 40 56 41 90 104 97

GLW-15-560-T60

Fig.A-263
Cab tyre cable 7.6 2000mm 201.5 164.5 46 17 117.5 106 34

GLW-18-80240-T60

37 30 27 15 18h6 6

46 20.5 130.5 113 10 75

4-6.5

7.5

40 60

47

4-8.5

110 130

Round Weight 3kg

CAD Data GLW-15-T60

Round Weight 4kg

CAD Data GLW-18-T60

A92

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor


Fig.A-264
Cab tyre cable 7.6 2000mm 186.5 153.5 34 33 9 4 27 24

Foot Mount type

GFW-15-560-T60

Fig.A-265
Cab tyre cable 7.6 2000mm

GFW-18-80240-T60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

201.5 164.5 34 46

10

37 5 30 27

Waterresistant Gearmotor with Brake

46 20.5 18h6 47 6 88 106

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 13 15h6 40 5

17 76 90

70.5 106

15

7.5

4-6.5

76 90

7.5

4-8.5

88 106

Round Weight 3kg

CAD Data GFW-15-T60

Round Weight 4kg

CAD Data GFW-18-T60

Foot Mount Type Gearmotor with Brake


Fig.A-266
Cab tyre cable 7.7 2000mm 210 23.5 177 34 33 27 24 15h6 77 90 13 5 97 8 65 40 56 41 90 104 40 60 47 110 130 46 17 117.5 77 106 23.5 34

With Waterresistant Brake Motor

GLV-15-560-T60

Fig.A-267
Cab tyre cable 7.7 2000mm

GLV-18-80240-T60

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

225 188

37 30 27 15 18h6 6 10 75 46 20.5 130.5 113

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-6.5

4-8.5

Round Weight 3kg

CAD Data GLV-15-T60

Round Weight 4kg

CAD Data GLV-18-T60


Speed Control Gearmotor with Brake Technical Information

Flange Mount Type Gearmotor with Brake


Fig.A-268
Cab tyre cable 7.7 2000mm 23.5 210 177 34 33 9 4 27 24

GFV-15-560-T60

Fig.A-269
Cab tyre cable 7.7 2000mm 23.5 46

GFV-18-80240-T60

Standard Motors

225 188 34

Cautions for Safety

37 10 5 30 27 15

46

Option

65.5 77 90 13 15h6 40 5

17 76 90

70.5 77 106

20.5 18h6 47 6 88 106

4-6.5

76 90

4-8.5

88 106

Round Weight 3kg

CAD Data GFV-15-T60

Round Weight 4kg

CAD Data GFV-18-T60

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A93

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft3-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

90W

T90

200/200/220

50/60/60

18

0.47/0.47/0.47

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 147 245 343 441 539 588 686 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 15 25 35 45 55 60 70 110 120 120 130 130 140 140 140 140

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 3-phase 90W 18 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

P.A95 P.A95 P.A95 P.A95 Fig.A-270 Fig.A-271 Fig.A-272 Fig.A-273 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A83.

A94

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Foot Mount type

Foot Mount Type Gearmotor


Fig.A-270
Cab tyre cable 7.6 2000mm 201.5 164.5 34 15 106 37 30 27 18h6 6 113 10 75 40 60 47 110 130

Flange Mount Type Gearmotor


Fig.A-271
Cab tyre cable 7.6 2000mm 201.5 164.5 34 10 37 5 30 27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GLW-18-5240-T90

GFW-18-5240-T90

46 20.5 130.5

46 20.5 18h6 47 6 88 106

70.5 106

15

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

7.5

4-8.5

7.5

4-8.5

88 106

Round Weight 4kg

CAD Data GLW-18-T90

Round Weight 4kg

CAD Data GFW-18-T90

Foot Mount Type Gearmotor with Brake


Fig.A-272
Cab tyre cable 7.7 2000mm 23.5 225 188 34 37 30 27 15 77 106 18h6 6 10 75 40 60 47 110 130 46 20.5 130.5 113

Flange Mount Type Gearmotor with Brake


Fig.A-273
Cab tyre cable 7.7 2000mm 23.5 225 188 34 10 37 5 30 27

With Waterresistant Brake Motor Speed Control Gearmotor

GLV-18-5240-T90

GFV-18-5240-T90

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

46

With Waterresistant Brake Motor Speed Control Gearmotor

70.5 77 106

15 18h6 47 6

20.5 88 106

4-8.5

4-8.5

106 88

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Round Weight 4kg

CAD Data GLV-18-T90

Round Weight 4kg

CAD Data GFV-18-T90

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Standard Motors

Cautions for Safety

Option

A95

A96

Parallel Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired according to the diagram shown on page E44, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A97

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15W

S15

100/100

50/60

12

0.39/0.35

1350/1650

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 98 196 245 343 441 490 539 588 637 686 735 735 784 784 784 784

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 80 80 80

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 15W 12 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240

P.A99 P.A99 P.A99 P.A99 Fig.A-274 Fig.A-275 Fig.A-276 Fig.A-277 2kg 2kg 2kg 2kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A97.

A98

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Foot Mount type

Foot Mount Type Gearmotor


Fig.A-274
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 22 20 12h6 76 11 4 82 7 55 9.5 35 50 35 76 90 46

Flange Mount Type Gearmotor


Fig.A-275
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 8 3.5 22 20

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GLW-12-5240-S15

GFW-12-5240-S15

46

13.5 103

59 76 11 12h6 35 4

13.5 64 76

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

9.5

4-6.5

64 76

Round Weight 2kg

CAD Data GLW-12-S15

Round Weight 2kg

CAD Data GFW-12-S15

Foot Mount Type Gearmotor with Brake


Fig.A-276
Cab tyre cable 7.7 2000mm 198 170.5 34 27.5 22 20 12h6 61.5 76 11 4 7 55 35 50 35 76 90 82 46

Flange Mount Type Gearmotor with Brake


Fig.A-277
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 8 3.5 22 20 35 76 11 12h6 4

With Waterresistant Brake Motor Speed Control Gearmotor

GLV-12-5240-S15

GFV-12-5240-S15

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

22

46

With Waterresistant Brake Motor Speed Control Gearmotor

13.5 103

59 61.5

13.5 64 76

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4-6.5

4-6.5

64 76

Round Weight 2kg

CAD Data GLV-12-S15

Round Weight 2kg

CAD Data GFV-12-S15

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Standard Motors

Cautions for Safety

Option

A99

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

25W

S25

100/100

50/60

12 15

0.48/0.48 0.44/0.45

1350/1600 1350/1650

7 7

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 12 1-phase 25W 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240

P.A100 P.A101 P.A101 P.A101 Fig.A-278 Fig.A-280 Fig.A-282 Fig.A-284 2kg 2kg 2kg 2kg

P.A100 P.A101 P.A101 P.A101 Fig.A-279 Fig.A-281 Fig.A-283 Fig.A-285 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A97.

Foot Mount Type Gearmotor


Fig.A-278
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 22 20 12h6 76 11 4 82 7 55 9.5 35 50 35 76 90 7.5 40 56 41 90 104 46

GLW-12-5120-S25

Fig.A-279
Cab tyre cable 7.6 2000mm

GLW-15-160240-S25

186.5 153.5 34

33 27 24 15h6

46 17 5 8 65 97 117.5

13.5 103 90 13

4-6.5

4-6.5

Round Weight 2kg

CAD Data GLW-12-S25

Round Weight 3kg

CAD Data GLW-15-S25

A100

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor


Fig.A-280
Cab tyre cable 7.6 2000mm 176 148.5 34 27.5 8 3.5 22 20

Foot Mount type

GFW-12-5120-S25

Fig.A-281
Cab tyre cable 7.6 2000mm

GFW-15-160240-S25

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

186.5 153.5 34 46

33 4 27 24

Waterresistant Gearmotor with Brake

46

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

59 76 11 12h6 35 4

13.5 64 76

65.5 90 13 15h6 40 5

17 76 90

9.5

4-6.5

64 76

7.5

4-6.5

76 90

Round Weight 2kg

CAD Data GFW-12-S25

Round Weight 3kg

CAD Data GFW-15-S25

Foot Mount Type Gearmotor with Brake


Fig.A-282
Cab tyre cable 7.7 2000mm 198 170.5 34 27.5 23.5 22 20 12h6 61.5 76 11 4 7 55 35 50 35 76 90 82 46 34

With Waterresistant Brake Motor

GLV-12-5120-S25

Fig.A-283
Cab tyre cable 7.7 2000mm

GLV-15-160240-S25

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

210 177 33 27 24 15h6 103 77 90 13 5 97 8 65 40 56 41 90 104 46 17 117.5

22

Gearmotor with Brake

13.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-6.5

4-6.5

Round Weight 2kg

CAD Data GLV-12-S25

Round Weight 3kg

CAD Data GLV-15-S25

Flange Mount Type Gearmotor with Brake


Fig.A-284
Cab tyre cable 7.7 2000mm 22 198 170.5 34 27.5 8 3.5 22 20

Speed Control Gearmotor with Brake Technical Information

GFV-12-5120-S25

Fig.A-285
Cab tyre cable 7.7 2000mm 23.5 46

GFV-15-160240-S25

Standard Motors

210 177 34

Cautions for Safety

33 4 27 24

Option

46

59 61.5 76 11 12h6 35 4

13.5 64 76

65.5 77 90 13 15h6 40 5

17 76 90

4-6.5

64 76

4-6.5

76 90

Round Weight 2kg

CAD Data GFV-12-S25

Round Weight 3kg

CAD Data GFV-15-S25

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A101

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

40W

S40

100/100

50/60

15 18

0.61/0.66 0.63/0.64

1350/1650 1400/1650

10 10

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.88 1.37 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.09 0.14 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 98 196 245 343 441 490 539 784 882 882 980 980 1080 1370 1370 1370

kgf 10 20 25 35 45 50 55 80 90 90 100 100 110 140 140 140

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 15 1-phase 40W 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 18 1/160 1/200 1/240

P.A102 P.A103 P.A103 P.A103 Fig.A-286 Fig.A-288 Fig.A-290 Fig.A-292 3kg 3kg 3kg 3kg

P.A102 P.A103 P.A103 P.A103 Fig.A-287 Fig.A-289 Fig.A-291 Fig.A-293 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A97.

Foot Mount Type Gearmotor


Fig.A-286
Cab tyre cable 7.6 2000mm 186.5 153.5 34 33 27 24 15h6 90 13 5 8 65 7.5 40 56 41 90 104 97

GLW-15-5120-S40

Fig.A-287
Cab tyre cable 7.6 2000mm 201.5 164.5

GLW-18-160240-S40

46 17 117.5

34 15 106

37 30 27 18h6 6

46 20.5 113 130.5 10 75

4-6.5

7.5

40 60

47

4-8.5

110 130

Round Weight 3kg

CAD Data GLW-15-S40

Round Weight 4kg

CAD Data GLW-18-S40

A102

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Flange Mount Type Gearmotor


Fig.A-288
Cab tyre cable 7.6 2000mm 186.5 153.5 34 33 9 4 27 24

Foot Mount type

GFW-15-5120-S40

Fig.A-289
Cab tyre cable 7.6 2000mm

GFW-18-160240-S40

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

201.5 164.5 34 46

10

37 5 30 27

Waterresistant Gearmotor with Brake

46

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 13 15h6 40 5

17 76 90

70.5 106

15 18h6 47 6

20.5 88 106

7.5

4-6.5

76 90

7.5

4-8.5

88 106

Round Weight 3kg

CAD Data GFW-15-S40

Round Weight 4kg

CAD Data GFW-18-S40

Foot Mount Type Gearmotor with Brake


Fig.A-290
Cab tyre cable 7.7 2000mm 210 23.5 177 34 33 27 24 15h6 77 90 13 5 97 8 65 40 56 41 90 104 40 60 47 110 130 46 17 117.5 77 106 23.5 34

With Waterresistant Brake Motor

GLV-15-5120-S40

Fig.A-291
Cab tyre cable 7.7 2000mm

GLV-18-160240-S40

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

225 188

37 30 27 15 18h6 6 46 20.5 113 130.5 10 75

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-6.5

4-8.5

Round Weight 3kg

CAD Data GLV-15-S40

Round Weight 4kg

CAD Data GLV-18-S40


Speed Control Gearmotor with Brake Technical Information

Flange Mount Type Gearmotor with Brake


Fig.A-292
Cab tyre cable 7.7 2000mm 210 177 34 33 9 4 27 24

GFV-15-5120-S40

Fig.A-293
Cab tyre cable 7.7 2000mm

GFV-18-160240-S40

Standard Motors

225 23.5 46 188 34 37 10 5 30 27 15 106 18h6 47 6

Cautions for Safety

23.5

46

Option

65.5 77 90 13 15h6 40 5

17 76 90

70.5 77

20.5 88 106

4-6.5

76 90

4-8.5

88 106

Round Weight 3kg

CAD Data GFV-15-S40

Round Weight 4kg

CAD Data GFV-18-S40

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A103

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

G-Type Parallel Shaft1-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

60W

S60

100/100

50/60

18

0.91/1.00

1400/1650

15

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.37 2.06 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.14 0.21 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 147 245 343 441 539 588 686 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 15 25 35 45 55 60 70 110 120 120 130 130 140 140 140 140

GLW

GFW

GLV

GFV

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 60W 18 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

P.A105 P.A105 P.A105 P.A105 Fig.A-294 Fig.A-295 Fig.A-296 Fig.A-297 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A97.

A104

Model Code P.A80

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension


Flange Mount type

Foot Mount type

Foot Mount Type Gearmotor


Fig.A-294
Cab tyre cable 7.6 2000mm 201.5 164.5 34 15 106 37 30 27 18h6 6 10 75 7.5 40 60 47 110 130

Flange Mount Type Gearmotor


Fig.A-295
Cab tyre cable 7.6 2000mm 201.5 164.5 34 10 37 5 30 27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GLW-18-5240-S60

GFW-18-5240-S60

46 20.5 113 130.5 70.5 106 15

46

20.5 18h6 47 6 88 106

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-8.5

7.5

4-8.5

88 106

Round Weight 4kg

CAD Data GLW-18-S60

Round Weight 4kg

CAD Data GFW-18-S60

Foot Mount Type Gearmotor with Brake


Fig.A-296
Cab tyre cable 7.7 2000mm 23.5 225 188 34 37 30 27 15 77 106 18h6 6 46 20.5 113 130.5 10 75 40 60 47 110 130

Flange Mount Type Gearmotor with Brake


Fig.A-297
Cab tyre cable 7.7 2000mm 225 23.5 188 34 10 37 5 30 27

With Waterresistant Brake Motor Speed Control Gearmotor

GLV-18-5240-S60

GFV-18-5240-S60

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

46

With Waterresistant Brake Motor Speed Control Gearmotor

70.5 77 106

15 18h6 47 6

20.5 88 106

4-8.5

4-8.5

88 106

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Round Weight 4kg

CAD Data GLV-18-S60

Round Weight 4kg

CAD Data GFV-18-S60

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Standard Motors

Cautions for Safety

Option

A105

A106

Parallel Shaft

Gearmotor

Speed Control Gearmotor


Model and Type Designation Standard Model Lineup

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part Insulation Classification Starting Method Protective cooling Method Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft Output Shaft Material Case Material Ambient Temperature Ambient Humidity Ambient Conditions Altitude Environment Installation Location Painting Painting Method Painting Color Mounting Direction

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start Totally Enclosed (6090W models are forced fan attached.) 4 Continuous Rating Helical gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

A107

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity

G-TypeParallel Shaft

G-Type Speed Control Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

G G

L F

U P

12 40

50 1500

G L F K U P

S25 S90 W C

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: G-Type Parallel Shaft : Foot Mount : Flange Mount : Small Flange Mount Frame No.2232 With Controller : With Speed Control Gearmotor U-Type Controller Sells Separately : With Speed Control Gearmotor P-Type

Output Shaft Diameter 5 : 15 1800 : 11800 S15 S25 : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W

Motor Designation and Capacity

S40 S60 S90

Blank : Standard Specifications 1-phase100V50Hz 100V60Hz Option W C Auxiliary Mark Spec. Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

: High Voltage 1-phase200V50Hz 200V60Hz : P-Type Terminal Box : Mark for Additional Specs.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

A108

Model and Type Designation

Standard Model Lineup


GLU GFP Controller Sells Separately GKP Controller Sells Separately

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/5 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

12 1-Phase 15W 22

1/40

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

12 15 22 28

1/100 1/120

1-Phase 25W

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

15 Speed Control Gearmotor GLU GFU GLP GFP GKU Note 1 GKP
Frame Number 2232

1/100 1/120

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 40W

18 28 32

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

15

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

1-Phase 60W

18 28 32 15 18

1/80

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

1/100 1/120 1/160 1/200 1/240

1-Phase 90W

28 32 40

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800

Standard Motors

Cautions for Safety

Option

Note 1The models GKM/GKMN(small flange mount type) are available in the frame number 22, 28 and 32. (Not available in the frame number 12, 15, 18 and 40.) 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

A109

A110

Parallel Shaft

Gearmotor

Speed Control Gearmotor


Performance Table Dimension diagram

G
Type
Parallel Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N m{kgf m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A111

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 15W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

S15 15W S15W

100/100 200/200

50/60 50/60

12 22 12 22

0.6/0.6 0.6/0.6 0.3/0.3 0.3/0.3

5001350/5501650 5001350/5501650 6001400/7501700 6001400/7501700

6 6 1.5 1.5 E
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 98 196 245 343 441 490 539 588 637 686 735 735 784 784 784 784 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 80 80 80 180 180 180 180 180 180 180 180 180

N m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98

kgf m 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

50rpm GLU GLP

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

GFU GFP GKU GKP

70 100V P.A113 Fig.A-298 60 2kg 200V P.A113 Fig.A-300 2kg

12

1-phase 15W

22

70 100V P.A113 Fig.A-299 60 5kg 200V

P.A113 Fig.A-301 5kg

P.A113 Fig.A-302 5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A111

Torque-Rotation Speed Characteristic Graph


1-Phase 15W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

A112

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Foot Mount Type


Fig.A-298
GLU-12-5240-S15 GLU-12-5240-S15W GLP-12-5240-S15 GLP-12-5240-S15W
173 300 22 20

Foot Mount type

Flange Mount type

Fig.A-299

GLU-22-3001800-S15 GLU-22-3001800-S15W GLP-22-3001800-S15 GLP-22-3001800-S15W


271 40 35
22h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

24.5

300
12h6

11 76 40 7 35 50 35

4 82 13.5 55 76 40

30

6 139 12 90

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

65 90

55

4-11

130 154

Round Weight 2kg

CAD Data GLU-12-S15 GLU-12-S15W

GLP-12-S15 GLP-12-S15W

Round Weight 5kg

CAD Data GLU-22-S15 GLP-22-S15 GLU-22-S15W GLP-22-S15W

Flange Mount Type


Fig.A-300
GFU-12-5240-S15 GFU-12-5240-S15W GFP-12-5240-S15 GFP-12-5240-S15W
173 22 20 12h6 11 76 40 4 13.5 8 3.5 27.5 32 76 32 35 21 43 76 76 40 12 4 47 300 30
22h6 148h7

With Waterresistant Brake Motor

Fig.A-301

GFU-22-3001800-S15 GFU-22-3001800-S15W GFP-22-3001800-S15 GFP-22-3001800-S15W


271 40 35 24.5 6

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

300

18

82.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

89 164

4-6.5

4-11

Round Weight 2kg

CAD Data GFU-12-S15 GFU-12-S15W

GFP-12-S15 GFP-12-S15W

Round Weight 5kg

CAD Data GFU-22-S15 GFU-22-S15W

GFP-22-S15 GFP-22-S15W

Small Flange Mount Type


Fig.A-302
GKU-22-3001800-S15 GKU-22-3001800-S15W GKP-22-3001800-S15 GKP-22-3001800-S15W
271 12 300 30
76 40

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 42 80 51

Standard Motors

Cautions for Safety

47 5 40 35 22h6 6
60h7

Option

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

24.5 4-8.6 61 140 61

89

Round Weight 5kg

CAD Data GKU-22-S15 GKU-22-S15W

GKP-22-S15 GKP-22-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A113

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 25W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S25 25W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S25W

200/200

50/60

12 15 22 28 12 15 22 28

0.6/0.6 0.7/0.7 0.6/0.6 0.7/0.7 0.4/0.4 0.4/0.4 0.4/0.4 0.4/0.4

7501350/10001650 5501400/6501650 7501350/10001650 5501400/6501650 8501350/10001650 6001350/8001650 8501350/10001650 6001350/8001650

8 8 8 8 2 2 2 2

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 98 196 245 343 441 490 539 588 637 686 735 735 784 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80 110 110 110 180 180 180 180 180 180 280 280 280

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 108 137 167

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

50rpm GLU GLP

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

GFU GFP GKU GKP

12

50 100V P.A115 Fig.A-303 45 2kg 200V

P.A116 Fig.A-307 2kg

1-phase 25W 15

60 P.A115 100V Fig.A-304 200V 3kg 50 P.A115 100V Fig.A-305 45 5kg 200V 60 P.A115 100V Fig.A-306 200V 7kg

P.A116 Fig.A-308 3kg

22

P.A116 Fig.A-309 5kg

P.A116 Fig.A-311 5kg

28

P.A116 Fig.A-310 7kg

P.A116 Fig.A-312 7kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A111

Torque-Rotation Speed Characteristic Graph


1-Phase 25W
Frame No.12 22/100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.12 22/200V


50Hz 60Hz 200

Frame No.15 28/100V


50Hz 60Hz 200

Frame No.15 28/200V


50Hz 60Hz

150

150

150

150

Torque

Torque

Torque

Torque

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

A114

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Foot Mount type

Foot Mount Type


Fig.A-303
GLU-12-5120-S25 GLU-12-5120-S25W GLP-12-5120-S25 GLP-12-5120-S25W
173 300 22 20
12h6

Fig.A-304

GLU-15-160240-S25 GLU-15-160240-S25W GLP-15-160240-S25 GLP-15-160240-S25W


183.5 27 24
15h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

300

11 76 40 7 35 50 35

4 82 13.5 55

13 90 40 8 40 56 41

5 97 17 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

76 90

4-6.5

90 104

Round Weight 2kg

CAD Data GLU-12-S25 GLU-12-S25W

GLP-12-S25 GLP-12-S25W

Round Weight 3kg

CAD Data GLU-15-S25 GLU-15-S25W

GLP-15-S25 GLP-15-S25W

Fig.A-305

GLU-22-300900-S25 GLU-22-300900-S25W GLP-22-300900-S25 GLP-22-300900-S25W


271 40 35
22h6

Fig.A-306

GLU-28-12001800-S25 GLU-28-12001800-S25W GLP-28-12001800-S25 GLP-28-12001800-S25W


293.5 45 40
28h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

24.5 300

31
Gearmotor with Brake

300 30 76 40 12 65 90 55 130 154 6 139 90 90 40

36.5 8 15 90 125 65 140 175 110 167

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

4-11

4-11

Round Weight 5kg

CAD Data GLU-22-S25 GLU-22-S25W

GLP-22-S25 GLP-22-S25W

Round Weight 7kg

CAD Data GLU-28-S25 GLU-28-S25W

GLP-28-S25 GLP-28-S25W

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

Technical Information

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Standard Motors

Cautions for Safety

Option

A115

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 25W
Flange Mount Type
Fig.A-307
GFU-12-5120-S25 GFU-12-5120-S25W GFP -12-5120-S25 GFP -12-5120-S25W
173 300 22 20 12h6 11 76 40 4 13.5 8 3.5 27.5 32 76 32
Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-308

GFU-15-160240-S25 GFU-15-160240-S25W GFP-15-160240-S25 GFP-15-160240-S25W


183.5 27 24
15h6

300 35 21 43 76 90 40

40

13

5 17

25 51 90

4-6.5

4 33

4-6.5

38 90

38

Round Weight 2kg

CAD Data GFU-12-S25 GFU-12-S25W

GFP-12-S25 GFP-12-S25W

Round Weight 3kg

CAD Data GFU-15-S25 GFU-15-S25W

GFP-15-S25 GFP-15-S25W

Fig.A-309

GFU-22-300900-S25 GFU-22-300900-S25W GFP-22-300900-S25 GFP-22-300900-S25W


271 40 35

Fig.A-310

GFU-28-12001800-S25 GFU-28-12001800-S25W GFP-28-12001800-S25 GFP-28-12001800-S25W


293.5 45 40

300 30 76 40 22h6 148h7 6

24.5

300

185

82.5 40 89 90 36.5

170h7 28h6

31 8

215

93

105.5 4-11

12

4 47

4-11

164

15

4 50

186

Round Weight 5kg

CAD Data GFU-22-S25 GFU-22-S25W

GFP-22-S25 GFP-22-S25W

Round Weight 7kg

CAD Data GFU-28-S25 GFU-28-S25W

GFP-28-S25 GFP-28-S25W

Small Flange Mount Type


Fig.A-311
GKU-22-300900-S25 GKU-22-300900-S25W GKP-22-300900-S25 GKP-22-300900-S25W
271 12 300 30
76 40

Fig.A-312

GKU-28-12001800-S25 GKU-28-12001800-S25W GKP-28-12001800-S25 GKP-28-12001800-S25W


293.5 15 52 5 45 40 28h6 8 36.5
80h7

47 5 40 35 22h6 6
60h7

42 80 24.5

51

300

58.5 47.5 94.5 31 105.5 71 164

90 40

89 61 71

4-8.6

61 140

4-11

Round Weight 5kg

CAD Data GKU-22-S25 GKU-22-S25W

GKP-22-S25 GKP-22-S25W

Round Weight 7kg

CAD Data GKU-28-S25 GKU-28-S25W

GKP-28-S25 GKP-28-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A116

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A117

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 40W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S40 40W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S40W

200/200

50/60

15 18 28 32 15 18 28 32

0.9/0.9 1.1/0.9 0.9/0.9 0.9/0.9 0.5/0.5 0.6/0.6 0.5/0.5 0.5/0.5

8001350/10501650 6501400/12001700 8001350/10501650 8001350/10501650 9001350/13001650 8501400/11001700 9001350/13001650 9001350/13001650

12 12 12 12 3 3 3 3

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 98 196 245 343 441 490 539 784 882 882 980 980 1080 1370 1370 1370 2740 2740 2740 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 80 90 90 100 100 110 140 140 140 280 280 280 280 280 280 520 520 520

N m 0.88 1.37 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 118 137 176 225 274

kgf m 0.09 0.14 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

50rpm GLU GLP

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

GFU GFP GKU GKP

15

40 P.A119 100V Fig.A-313 3kg 200V

P.A120 Fig.A-317 3kg

1-phase 40W 18

50 P.A119 100V Fig.A-314 40 200V 4kg

P.A120 Fig.A-318 4kg

28

40 P.A119 100V Fig.A-315 200V 7kg

P.A120 Fig.A-319 7kg

P.A120 Fig.A-321 7kg

32

40 P.A119 100V Fig.A-316 200V 11kg

P.A120 Fig.A-320 11kg

P.A120 Fig.A-322 11kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A111

Torque-Rotation Speed Characteristic Graph


1-Phase 40W
Frame No.15 28 32/100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.15 28 32/200V Frame No.18/100V


50Hz 60Hz 200 50Hz 60Hz 200

Frame No.18/200V
50Hz 60Hz

150 Torque Torque

150 Torque

150 Torque

150

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

A118

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Foot Mount type

Foot Mount Type


Fig.A-313
GLU-15-5120-S40 GLU-15-5120-S40W GLP-15-5120-S40 GLP-15-5120-S40W
183.5 300 27 24
15h6 40

Fig.A-314

GLU-18-160240-S40 GLU-18-160240-S40W GLP-18-160240-S40 GLP-18-160240-S40W


198.5 30 27
18h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

300

13 90 40 8 40 56 41

5 97 17 65

15 6 10 40 60 47 20.5 113 75

106

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLU-15-S40 GLU-15-S40W

GLP-15-S40 GLP-15-S40W

Round Weight 4kg

CAD Data GLU-18-S40 GLU-18-S40W

GLP-18-S40 GLP-18-S40W

Gearmotor with Brake

Fig.A-315

GLU-28-300900-S40 GLU-28-300900-S40W GLP-28-300900-S40 GLP-28-300900-S40W


293.5 45 40
28h6

Fig.A-316

GLU-32-12001800-S40 GLU-32-12001800-S40W GLP-32-12001800-S40 GLP-32-12001800-S40W


324 55 50
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

31 300

35
Gearmotor with Brake

300 36.5 90 40 15 90 125 65 140 175 8 110 167 90

40

41.5 10 18 130 168 70 170 208 130 198

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

4-11

4-13

Round Weight 7kg

CAD Data GLU-28-S40 GLU-28-S40W

GLP-28-S40 GLP-28-S40W

Round Weight 11kg

CAD Data GLU-32-S40 GLU-32-S40W

GLP-32-S40 GLP-32-S40W

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

Technical Information

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Standard Motors

Cautions for Safety

Option

A119

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 40W
Flange Mount Type
Fig.A-317
GFU-15-5120-S40 GFU-15-5120-S40W GFP-15-5120-S40 GFP-15-5120-S40W
183.5 27 24
15h6 Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-318

GFU-18-160240-S40 GFU-18-160240-S40W GFP-18-160240-S40 GFP-18-160240-S40W


198.5 30 27
18h6

300

300
40

47

13 90 40

5 17

25 51 90 106 40

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

CAD Data GFU-15-S40 GFU-15-S40W

GFP-15-S40 GFP-15-S40W

Round Weight 4kg

CAD Data GFU-18-S40 GFU-18-S40W

GFP-18-S40 GFP-18-S40W

Fig.A-319

GFU-28-300900-S40 GFU-28-300900-S40W GFP-28-300900-S40 GFP-28-300900-S40W


293.5 45 40

Fig.A-320

GFU-32-12001800-S40 GFU-32-12001800-S40W GFP-32-12001800-S40 GFP-32-12001800-S40W


324 55 50

300 36.5 170h7 28h6 8

31

300

215

93 40 105.5 90 41.5

180h7 32h6

35 10

250

107.5

40 90

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

CAD Data GFU-28-S40 GFU-28-S40W

GFP-28-S40 GFP-28-S40W

Round Weight 11kg

CAD Data GFU-32-S40 GFU-32-S40W

GFP-32-S40 GFP-32-S40W

Small Flange Mount Type


Fig.A-321
GKU-28-300900-S40 GKU-28-300900-S40W GKP-28-300900-S40 GKP-28-300900-S40W
293.5 15 300 36.5
90 40

Fig.A-322

GKU-32-12001800-S40 GKU-32-12001800-S40W GKP-32-12001800-S40 GKP-32-12001800-S40W


324 15 63 5 55 50 32h6 10 41.5
88h7

52 5 45 40 28h6 8
80h7

58.5 47.5 94.5 31 105.5 71 164


90 40

300

71.5 58.5 113.5 35 126.5 86 198

4-11

71

4-13

86

Round Weight 7kg

CAD Data GKU-28-S40 GKU-28-S40W

GKP-28-S40 GKP-28-S40W

Round Weight 11kg

CAD Data GKU-32-S40 GKU-32-S40W

GKP-32-S40 GKP-32-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A120

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A121

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 60W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S60 60W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S60W

200/200

50/60

15 18 28 32 15 18 28 32

1.0/1.7 1.3/1.3 1.0/1.7 1.0/1.7 0.8/0.9 0.8/0.9 0.8/0.9 0.8/0.9

7001350/8001650 5001400/6501650 7001350/8001650 7001350/8001650 7001350/8001650 7501400/8501650 7001350/8001650 7001350/8001650

20 20 20 20 5 5 5 5

Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 98 196 245 343 441 490 539 784 882 882 1270 1270 1370 1370 1370 1370 2740 2740 2740 2740 2740 2740 5100 5100 5100

kgf 10 20 25 35 45 50 55 80 90 90 130 130 140 140 140 140 280 280 280 280 280 280 520 520 520

N m 1.37 2.06 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 176 216 284 353 421

kgf m 0.14 0.21 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

50rpm GLU GLP

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

GFU GFP GKU GKP

60 100V 55 200V P.A123 Fig.A-323 3kg P.A124 Fig.A-327 3kg

15

70 100V 55 200V 60 100V 55 200V 60 P.A123 100V Fig.A-326 55 11kg 200V P.A124 Fig.A-330 11kg P.A124 Fig.A-332 11kg P.A123 Fig.A-325 7kg P.A124 Fig.A-329 7kg P.A124 Fig.A-331 7kg P.A123 Fig.A-324 4kg P.A124 Fig.A-328 4kg

1-phase 60W

18

28

32

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A111.

Torque-Rotation Speed Characteristic Graph


1-Phase 60W Frame No.15 28 32/100V Frame No.15 28 32/200V
50Hz 60Hz 200 200 50Hz 60Hz 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.18/100V
50Hz 60Hz

Frame No.18/200V
50Hz 60Hz 200

150 Torque

150 Torque Torque

150 Torque

150

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

A122

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Foot Mount type

Foot Mount Type


Fig.A-323
GLU-15-560-S60 GLU-15-560-S60W GLP-15-560-S60 GLP-15-560-S60W
217 300 27 24
15h6

Fig.A-324

GLU-18-80240-S60 GLU-18-80240-S60W GLP-18-80240-S60 GLP-18-80240-S60W


232 30 27
18h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

300

13 92 8 40 56 41

5 98 17 65

15 108 10 40 60 47

6 20.5 75 114

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLU-15-S60 GLU-15-S60W

GLP-15-S60 GLP-15-S60W

Round Weight 4kg

CAD Data GLP-18-S60 GLU-18-S60 GLU-18-S60W GLP-18-S60W

Fig.A-325

GLU-28-300900-S60 GLU-28-300900-S60W GLP-28-300900-S60 GLP-28-300900-S60W


327 45 40
28h6

Fig.A-326

GLU-32-12001800-S60 GLU-32-12001800-S60W GLP-32-12001800-S60 GLP-32-12001800-S60W


357.5 55 50
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

4 300

4 31 300

35
Gearmotor with Brake

36.5 92 15 90 125 65 140 175 8 110 167 92

41.5 10 18 130 168 70 170 208 198 130

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

4-11

4-13

Round Weight 7kg

CAD Data GLU-28-S60 GLU-28-S60W

GLP-28-S60 GLP-28-S60W

Round Weight 11kg

CAD Data GLU-32-S60 GLU-32-S60W

GLP-32-S60 GLP-32-S60W

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.

Technical Information

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

Standard Motors

Cautions for Safety

Option

A123

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 60W
Flange Mount Type
Fig.A-327
GFU-15-560-S60 GFU-15-560-S60W GFP-15-560-S60 GFP-15-560-S60W
217 27 24
15h6 Flange Mount type Small Flange Mount type (Frame Number 2232)

Fig.A-328

GFU-18-80240-S60 GFU-18-80240-S60W GFP-18-80240-S60 GFP-18-80240-S60W


232 30 27
18h6

300

4
40

300

47

13 92

5 17

25 51 90 108

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

CAD Data GFU-15-S60 GFU-15-S60W

GFP-15-S60 GFP-15-S60W

Round Weight 4kg

CAD Data GFU-18-S60 GFU-18-S60W

GFP-18-S60 GFP-18-S60W

Fig.A-329

GFU-28-300900-S60 GFU-28-300900-S60W GFP-28-300900-S60 GFP-28-300900-S60W


327 45 40

Fig.A-330

GFU-32-12001800-S60 GFU-32-12001800-S60W GFP-32-12001800-S60 GFP-32-12001800-S60W


357.5 55 50

300 36.5 92 170h7 28h6 8

31

300

215

93 41.5 105.5 92

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

CAD Data GFU-28-S60 GFU-28-S60W

GFP-28-S60 GFP-28-S60W

Round Weight 11kg

CAD Data GFU-32-S60 GFU-32-S60W

GFP-32-S60 GFP-32-S60W

Small Flange Mount Type


Fig.A-331
GKU-28-300900-S60 GKU-28-300900-S60W GKP-28-300900-S60 GKP-28-300900-S60W
327 15 300 36.5 92 31 4-11 71 164 71 52 5 45 40 28h6
80h7

Fig.A-332

GKU-32-12001800-S60 GKU-32-12001800-S60W GKP-32-12001800-S60 GKP-32-12001800-S60W


357.5 15 63 5 55 50 32h6
88h7

300 8 58.5 47.5 94.5 105.5 92 41.5

10

71.5 58.5 113.5 35 126.5 86 198

4-13

86

Round Weight 7kg

CAD Data GKU-28-S60 GKU-28-S60W

GKP-28-S60 GKP-28-S60W

Round Weight 11kg

CAD Data GKU-32-S60 GKU-32-S60W

GKP-32-S60 GKP-32-S60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A124

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A125

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 90W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S90 90W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S90W

200/200

50/60

15 18 28 32 40 15 18 28 32 40

1.4/2.0 1.4/2.0 1.4/2.0 1.4/2.0 1.4/2.0 0.9/1.0 1.0/1.1 0.9/1.0 0.9/1.0 1.0/1.1

9501300/11501600 9501350/11001650 9501300/11501600 9501300/11501600 9501350/11001650 10001350/11501600 9001350/11001650 10001350/11501600 10001350/11501600 9001350/11001650

20 20 20 20 20 5 5 5 5 5

Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 147 245 343 441 539 588 686 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 15 25 35 45 55 60 70 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

N m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637

kgf m 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

50rpm GLU GLP

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

GFU GFP GKU GKP

15

40 P.A127 100V Fig.A-333 200V 3kg

P.A128 Fig.A-338 3kg

1-phase 90W

18

40 P.A127 100V Fig.A-334 200V 4kg

P.A128 Fig.A-339 4kg

28

32

40

40 P.A127 100V Fig.A-335 200V 7kg 40 P.A127 100V Fig.A-336 200V 11kg 40 P.A127 100V Fig.A-337 200V 15kg

P.A128 Fig.A-340 7kg P.A128 Fig.A-341 11kg P.A128 Fig.A-342 15kg

P.A129 Fig.A-343 7kg P.A129 Fig.A-344 11kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A111.

Torque-Rotation Speed Characteristic Graph


1-Phase 90W Frame No.15 28 32/100V Frame No.15 28 32/200V
50Hz 60Hz 200 200 50Hz 60Hz 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.18 40/100V


50Hz 60Hz

Frame No.18 40/200V


50Hz 60Hz 200

150

150

150

150

Torque

Torque

Torque

Torque

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

A126

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Foot Mount type

Foot Mount Type


Fig.A-333
GLU-15-530-S90 GLU-15-530-S90W GLP-15-530-S90 GLP-15-530-S90W
217 300 27 24
15h6

Fig.A-334

GLU-18-40240-S90 GLU-18-40240-S90W GLP-18-40240-S90 GLP-18-40240-S90W


232 30 27
18h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

300

13 92 8 40 56 41

5 98 17 65

15 108 10 40 60 47

6 20.5 75 114

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-6.5

90 104

4-8.5

110 130

Round Weight 3kg

CAD Data GLU-15-S90 GLU-15-S90W

GLP-15-S90 GLP-15-S90W

Round Weight 4kg

CAD Data GLU-18-S90 GLU-18-S90W

GLP-18-S90 GLP-18-S90W

Fig.A-335

GLU-28-300450-S90 GLU-28-300450-S90W GLP-28-300450-S90 GLP-28-300450-S90W


327 45 40
28h6

Fig.A-336

GLU-32-600900-S90 GLU-32-600900-S90W GLP-32-600900-S90 GLP-32-600900-S90W


357.5 55 50
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

4 300

4 31 300

35

36.5 92 15 90 125 65 140 175 8 110 167 92

41.5 10 18 130 168 70 170 208 198 130

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

4-11

4-13

Round Weight 7kg

CAD Data GLU-28-S90 GLU-28-S90W

GLP-28-S90 GLP-28-S90W

Round Weight 11kg

CAD Data GLU-32-S90 GLU-32-S90W

GLP-32-S90 GLP-32-S90W

Speed Control Gearmotor with Brake Technical Information

Fig.A-337

GLU-40-12001800-S90 GLU-40-12001800-S90W GLP -40-12001800-S90 GLP -40-12001800-S90W


401.5 65 60
40h6

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled. 230 150

Standard Motors

4 300

Cautions for Safety

43

Option

49 108 20 150 196 90 210 254 12

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

4-15

Round Weight 15kg

CAD Data GLU-40-S90 GLU-40-S90W

GLP-40-S90 GLP-40-S90W

A127

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


G-Type Parallel Shaft1-Phase 90W
Flange Mount Type
Fig.A-338
GFU-15-530-S90 GFU-15-530-S90W GFP-15-530-S90 GFP-15-530-S90W
217
Flange Mount type

Fig.A-339

GFU-18-40240-S90 GFU-18-40240-S90W GFP-18-40240-S90 GFP-18-40240-S90W


232 30 27
18h6

300

27 24 15h6 13

4 40 25 51 90 108

300

47

92

5 17

15

29 6 20.5 59 106

4 33

4-6.5

38 90

38

10

5 37

4-8.5

44 106

44

Round Weight 3kg

CAD Data GFU-15-S90 GFU-15-S90W

GFP-15-S90 GFP-15-S90W

Round Weight 4kg

CAD Data GFU-18-S90 GFU-18-S90W

GFP-18-S90 GFP-18-S90W

Fig.A-340

GFU-28-300450-S90 GFU-28-300450-S90W GFP-28-300450-S90 GFP-28-300450-S90W


327 45 40

Fig.A-341

GFU-32-600900-S90 GFU-32-600900-S90W GFP-32-600900-S90 GFP-32-600900-S90W


357.5 55 50

300 36.5 92 170h7 28h6 8

31

300

215

93 41.5 105.5 92

180h7 32h6

35 10

250

107.5

126.5 4- 13

15

4 50

4-11

186

15

4 60

215

Round Weight 7kg

CAD Data GFU-28-S90 GFU-28-S90W

GFP-28-S90 GFP-28-S90W

Round Weight 11kg

CAD Data GFU-32-S90 GFU-32-S90W

GFP-32-S90 GFP-32-S90W

Fig.A-342

GFU-40-12001800-S90 GFU-40-12001800-S90W GFP -40-12001800-S90 GFP -40-12001800-S90W


401.5 65 60 43 12

300 49 108 18 5 71
230h7 40h6

31

135

149 4-18

270

Round Weight 15kg

CAD Data GFU-40-S90 GFU-40-S90W

GFP-40-S90 GFP-40-S90W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A128

Model Code P.A108

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension


Small Flange Mount type (Frame Number 2232)

Small Flange Mounted Type


Fig.A-343
GKU-28-300450-S90 GKU-28-300450-S90W GKP-28-300450-S90 GKP-28-300450-S90W
327 15 300 36.5 92 31 4-11 71 164 71 52 5 45 40 28h6
80h7

Fig.A-344

GKU-32-600900-S90 GKU-32-600900-S90W GKP-32-600900-S90 GKP-32-600900-S90W


357.5 15 63 5 55 50 32h6
88h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

300 8 58.5 47.5 94.5 105.5 92 41.5

10

71.5 58.5 113.5 35 126.5 86 198

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-13

86

Round Weight 7kg

CAD Data GKP-28-S90 GKU-28-S90 GKU-28-S90W GKP-28-S90W

Round Weight 11kg

CAD Data GKU-32-S90 GKP-32-S90 GKU-32-S90W GKP-32-S90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A129

A130

Parallel Shaft

Gearmotor

Gearmotor with Clutch and Brake


Model and Type Designation Standard Model Lineup

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start Totally Enclosed 4 Continuous Rating Helical gear

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 100% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

A131

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity Auxiliary Mark

G-TypeParallel Shaft

G-Type gearmotors with Clutch and Brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Spec. Designation

G G

L MA L MA

15 18

G L

50 60

T25 S60

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: G-Type Parallel Shaft : Foot Mount : With Clutch/Brake

MA

Output Shaft Diameter 5 : 15 1800 : 11800 T15 T25 T50 T90 : 3-phase 15W : 3-phase 25W : 3-phase 50W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 50W : 1-phase 90W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz

Motor Designation and Capacity or Standard Volatage/ Frequency

S15 S25 S50 S90

Standard Volatage/Frequency

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position indicator for lead-wire Refer to the indication mark list in P. E54 for details.

A132

Model and Type Designation

Standard Model Lineup


Type
4P Motor Capacity Frame Number

Reduction Ratio
1/5 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

12 15W 15W 15 18 25W Gearmotor with Clutch and Brake GT-PACK GLMA 25W 50W 50W 90W 18 90W 12 15 18 15 18

1/40 1/80

1/100 1/120

1/160 1/200 1/240 1/100 1/120 1/160 1/200 1/240 1/5 1/40 1/80 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

1/100 1/120

1/5 1/40

1/7.5 1/50

1/10 1/60

1/15

1/20

1/25

1/30

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Note 1) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A133

A134

Parallel Shaft

Gearmotor

Gearmotor with Clutch and Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

3-Phase 200V
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A135

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft3-Phase 15W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

12
Standard Voltage (Continuous Rated 4 Poles)

0.14/0.13/0.13 0.14/0.13/0.13 0.18/0.17/0.17

1350/1550/1600 1350/1550/1600 1350/1550/1600


Page, Diagram No. of the Outer Dimension Diagram, Round Weight

15W

T15

200/200/220

50/60/60

15 18

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 1/ 80 1/100 1/120 1/160 1/200 1/240 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 22.5 18 15 11.2 9 7.5

12 3-phase 15W

15

18

N m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 3.92 3.92 3.92 3.92 3.92 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 98 196 245 343 441 490 539 539 539 539 539 539 539 539 539 539 735 735 735 882 882 882

kgf 10 20 25 35 45 50 55 55 55 55 55 55 55 55 55 55 75 75 75 90 90 90

GLMA

P.A136 Fig.A-345 5kg

P.A136 Fig.A-346 6kg P.A136 Fig.A-347 8kg

Foot Mount Type


Fig.A-345
300

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A135.

GLMA-12-5240-T15
265.5 131 22 20
12h6 114.5

Fig.A-346
300

GLMA-15-80120-T15
289 154.5 27 24
15h6 128

13.5 4 5 122.3 65 100 114 200 40 57 76 11

17 5 5 70 110 127 134

76

11

200

40 54

48

4-7

58

4-9

Round Weight 5kg

CAD Data GLMA-12-T15

Round Weight 6kg

CAD Data GLMA-15-T15

Fig.A-347
300

GLMA-18-160240-T15
299 159.5 30 27
18h6 142

20.5 6 5 75 110 127 146

90

13

200

40 57

65

4-9

A136

Round Weight 8kg

CAD Data GLMA-18-T15

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

Performance Table/ Dimension

GTR MINI SERIES

Gearmotor with Clutch and Brake


G-Type Parallel Shaft3-Phase 25W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

12
Standard Voltage (Continuous Rated 4 Poles)

0.21/0.19/0.19 0.21/0.19/0.19 0.18/0.17/0.17

1350/1550/1600 1350/1550/1600 1350/1550/1600


Page, Diagram No. of the Outer Dimension Diagram, Round Weight

25W

T25

200/200/220

50/60/60

15 18

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

50Hz 1/ 1/ 12 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3

N 98 196 245 343 441 490 539 588 637 686 735 735 784

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80

GLMA

1/ 10 1/ 15 1/ 20 1/ 25 3-phase 25W 15 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 18 1/100 1/120

P.A137 Fig.A-348 5kg

P.A137 Fig.A-349 6kg P.A137 Fig.A-350 8kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A135.

Foot Mount Type


Fig.A-348
300

With Waterresistant Brake Motor

GLMA-12-530-T25
265.5 131 22 20
12h6 114.5

Fig.A-349
300

GLMA-15-4060-T25
289 154.5 27 24
15h6 128

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

13.5 4 5 122.3 65 100 114 200 40 57 76 11

17 5 5 70 110 127 134

76

11

Speed Control Gearmotor with Brake Technical Information

200

40 54

48

4-7

58

4-9

Round Weight 5kg

CAD Data GLMA-12-T25

Round Weight 6kg

CAD Data GLMA-15-T25

Standard Motors

Fig.A-350
300

GLMA-18-80120-T25
299 159.5 30 27
18h6 142

Cautions for Safety

Option

20.5 6 5 75 110 127 146

90

13

200

40 57

65

4-9

Round Weight 8kg

CAD Data GLMA-18-T25

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

A137

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft3-Phase 50W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

50W

T50

200/200/220

50/60/60

15 18

0.29/0.27/0.27 0.27/0.26/0.26

1350/1550/1600 1350/1550/1600

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

50Hz 1/ 1/ 15 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15

N m 1.18 1.76 2.16 3.33 4.51 5.49 6.66 8.82 10.8 12.7 14.7 14.7 14.7

kgf m 0.12 0.18 0.22 0.34 0.46 0.56 0.68 0.90 1.1 1.3 1.5 1.5 1.5

N 98 196 245 343 441 490 539 784 882 882 882 882 882

kgf 10 20 25 35 45 50 55 80 90 90 90 90 90

GLMA

1/ 10 1/ 15 1/ 20 3-phase 50W 1/ 25 1/ 30 1/ 40 1/ 50 18 1/ 60
1/ 80 1/100 1/120

P.A138 Fig.A-351 6kg

P.A138 Fig.A-352 8kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A135.

Foot Mount Type


Fig.A-351
GLMA-15-530-T50

Fig.A-352

GLMA-18-40120-T50

289 300 154.5 27 24


15h6 128

299 300 159.5 30 27


18h6

142

17 5 5 70 110 127 134 13

20.5 6 5 75 110 127 146

76

11

90

200

40 57

58

200

4-9

40 57

65

4-9

Round Weight 6kg

CAD Data GLMA-15-T50

Round Weight 8kg

CAD Data GLMA-18-T50

A138

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft3-Phase 90W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

90W

T90

200/200/220

50/60/60

18

0.51/0.48/0.48

1350/1550/1550

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25

60Hz 360 240 180 120 90 72 60 45 36 30

N m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 14.7 14.7 14.7

kgf m 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.5 1.5 1.5

N 147 245 343 441 539 588 686 882 882 882

kgf 15 25 35 45 55 60 70 90 90 90

GLMA

1/ 10 1/ 15 3-phase 90W 18 1/ 20 1/ 25 1/ 30
1/ 40 1/ 50 1/ 60

P.A139 Fig.A-353 8kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A135.

Foot Mount Type


Fig.A-353
GLMA-18-560-T90

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

299 300 159.5 30 27


18h6

142

20.5 6 5 75 110 127 146

90

13

Technical Information

200

40 57

65

4-9

Standard Motors

Cautions for Safety

Round Weight 8kg

CAD Data GLMA-18-T90

Option

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

A139

A140

Parallel Shaft

Gearmotor

Gearmotor with Clutch and Brake


Performance Table Dimension diagram

G
Type
Parallel Shaft

1-Phase 100V
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A141

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft1-Phase 15W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

12
Standard Voltage (Continuous Rated 4 Poles)

0.39/0.35 0.39/0.35 0.44/0.45

1350/1650 1350/1650 1350/1650

5 5 5
Page, Diagram No. of the Outer Dimension Diagram, Round Weight

15W

S15

100/100

50/60

15 18

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

50Hz 1/ 5 1/ 7.5 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 1/ 80 1/100 1/120 1/160 1/200 1/240 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 18.8 15 12.5 9.4 7.5 6.3

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 22.5 18 15 11.2 9 7.5

12 1-phase 15W

15

18

N m 0.29 0.49 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 3.92 3.92 3.92 3.92 3.92 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.03 0.05 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 98 196 245 343 441 490 539 539 539 539 539 539 539 539 539 539 735 735 735 882 882 882

kgf 10 20 25 35 45 50 55 55 55 55 55 55 55 55 55 55 75 75 75 90 90 90

GLMA

P.A142 Fig.A-354 5kg

P.A142 Fig.A-355 6kg P.A142 Fig.A-356 8kg

Foot Mount Type


Fig.A-354
300

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A141.

GLMA-12-5240-S15
265.5 131 22 20
12h6 114.5

Fig.A-355
300

GLMA-15-80120-S15
289 154.5 27 24
15h6 128

13.5 4 5 122.3 65 100 114 200 40 57 76 11

17 5 5 70 110 127 134

76

11

200

40 54

48

4-7

58

4-9

Round Weight 5kg

CAD Data GLMA-12-S15

Round Weight 6kg

CAD Data GLMA-15-S15

Fig.A-356
300

GLMA-18-160240-S15
299 159.5 30 27
18h6 142

20.5 6 5 75 110 127 146

90

13

200

40 57

65

4-9

A142

Round Weight 8kg

CAD Data GLMA-18-S15

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft1-Phase 25W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

Standard Voltage (Continuous Rated 4 Poles)

12 25W S25 100/100 50/60 15 18


Output Shaft Rotation Speed rpm

0.48/0.48 0.48/0.48 0.44/0.45

1350/1600 1350/1600 1350/1650

7 7 7
Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

50Hz 1/ 1/ 12 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15

N m 0.59 0.78 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7

kgf m 0.06 0.08 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3

N 98 196 245 343 441 490 539 588 637 686 735 735 784

kgf 10 20 25 35 45 50 55 60 65 70 75 75 80

GLMA

1/ 10 1/ 15 1/ 20 1/ 25 1-phase 25W 15 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 18 1/100 1/120

P.A143 Fig.A-357 5kg

P.A143 Fig.A-358 6kg P.A143 Fig.A-359 8kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page A141.

Foot Mount Type


Fig.A-357
300

With Waterresistant Brake Motor

GLMA-12-530-S25
265.5 131 22 20
12h6 114.5

Fig.A-358
300

GLMA-15-4060-S25
289 154.5 27 24
15h6 128

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

13.5 4 5 122.3 65 100 114 200 40 57 76 11

17 5 5 70 110 127 134

76

11

Speed Control Gearmotor with Brake Technical Information

200

40 54

48

4-7

58

4-9

Round Weight 5kg

CAD Data GLMA-12-S25

Round Weight 6kg

CAD Data GLMA-15-S25

Standard Motors

Fig.A-359
300

GLMA-18-80120-S25
299 159.5 30 27
18h6 142

Cautions for Safety

Option

20.5 6 5 75 110 127 146

90

13

200

40 57

65

4-9

Round Weight 8kg

CAD Data GLMA-18-S25

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

A143

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft1-Phase 50W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

50W

S50

100/100

50/60

15 18

0.67/0.80 0.61/0.66

1400/1650 1350/1650

12 10

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

50Hz 1/ 1/ 15 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15

N m 1.18 1.76 2.16 3.33 4.51 5.49 6.66 8.82 10.8 12.7 14.7 14.7 14.7

kgf m 0.12 0.18 0.22 0.34 0.46 0.56 0.68 0.90 1.1 1.3 1.5 1.5 1.5

N 98 196 245 343 441 490 539 784 882 882 882 882 882

kgf 10 20 25 35 45 50 55 80 90 90 90 90 90

GLMA

1/ 10 1/ 15 1/ 20 1-phase 50W 1/ 25 1/ 30 1/ 40 1/ 50 18 1/ 60
1/ 80 1/100 1/120

P.A144 Fig.A-360 6kg

P.A144 Fig.A-361 8kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A141.

Foot Mount Type


Fig.A-360
GLMA-15-530-S50

Fig.A-361

GLMA-18-40120-S50

327 300 154.5 27 24


15h6 128

299 300 159.5 17 5 5 70 110 127 200 40 57 65 134 90 13 5 4-9 110 127 30 27
18h6 142

20.5 6 75 146

80

11

200

40 57

58

4-9

Round Weight 6kg

CAD Data GLMA-15-S50

Round Weight 8kg

CAD Data GLMA-18-S50

A144

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Clutch and Brake


G-Type Parallel Shaft1-Phase 90W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

90W

S90

100/100

50/60

18

1.3/1.4

1350/1600

20

Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25

60Hz 360 240 180 120 90 72 60 45 36 30

N m 2.06 3.14 4.12 6.17 8.33 10.8 12.7 14.7 14.7 14.7

kgf m 0.21 0.32 0.42 0.63 0.85 1.1 1.3 1.5 1.5 1.5

N 147 245 343 441 539 588 686 882 882 882

kgf 15 25 35 45 55 60 70 90 90 90

GLMA

1/ 10 1/ 15 1-phase 90W 18 1/ 20 1/ 25 1/ 30
1/ 40 1/ 50 1/ 60

P.A145 Fig.A-362 8kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A141.

Foot Mount Type


Fig.A-362
GLMA-18-560-S90

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

335.5 300 159.5 30 27


18h6 142

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

20.5 6 5 75 110 127 146

94

13

200

40 57

65

4-9

Standard Motors

Cautions for Safety

Round Weight 8kg

CAD Data GLMA-18-S90

Option

Model Code P.A132

Lead-Wire Position Mark P.E54

Option P.E110

A145

A146

Parallel Shaft

GT-Type

Gearmotor

Gearmotor Gearmotor with Brake


ModelType Designation Standard Model Lineup

GT
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W60W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start 4 Continuous Rating Helical gear

1-Phase
15W60W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Totally Enclosed non-ventilated or Totally Enclosed fan-cooled

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

A147

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity

GT-TypeParallel Shaft

GT-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

GT 8 GT 9

M B

8 15

50 130

GT 8 9 M B

T15 S60 W T

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: GT-Type Parallel Shaft Flange Dimension80 Flange Dimension90 : With Motor : With Brake Motor

Output Shaft Diameter 5 : 15 200 : 1200 T15 T25 T40 T60 S15 S25 S40 S60 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz W : High Voltage 1-phase only 1-phase 200V50Hz 200V60Hz T K C : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Mark for Additional Specs.

Motor Designation and Capacity

Blank : Standard Specifications

Option

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

A148

Model and Type Designation

Standard Model Lineup


Type
4P Motor Capacity Shaft Diameter

Reduction Ratio
1/5 1/50 1/7.5 1/60 1/10 1/80 1/15 1/20 1/25 1/30 1/40

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

3-Phase 15W Gearmotor GT8M Gearmotor with Brake GT8B 3-Phase 25W 10 1-Phase 25W 8 1-Phase 15W

1/100 1/120 1/160 1/200

1/5 1/50

1/7.5 1/60

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/100 1/120 1/160 1/200

Speed Control Gearmotor Gearmotor with Clutch /Brake

3-Phase 40W Gearmotor GT9M Gearmotor with Brake GT9B 3-Phase 60W 15 1-Phase 60W 12 1-Phase 40W

1/5 1/50

1/7.5 1/60

1/10 1/80

1/15

1/20

1/30

1/40

1/100 1/120

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

1/5 1/50

1/7.5 1/60

1/10 1/80

1/15

1/20

1/30

1/40

1/100 1/120

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor

Note 1) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

A149

A150

Parallel Shaft

GT-Type

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

GT
Type
Parallel Shaft

Gearmotors with the flange mounting dimension compatible with the products of other domestic Japanese manufacturers.

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A151

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

15W

T15

200/200/220

50/60/60

0.17/0.15/0.15

1390/1660/1680

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 0.49 0.69 0.88 1.37 1.86 2.25 2.74 3.72 4.61 5.49 6.86 6.86 6.86 6.86 6.86 kgf m 0.05 0.07 0.09 0.14 0.19 0.23 0.28 0.38 0.47 0.56 0.7 0.7 0.7 0.7 0.7

60Hz N m 0.39 0.59 0.78 1.18 1.47 1.86 2.25 3.04 3.82 4.51 6.08 6.86 6.86 6.86 6.86 kgf m 0.04 0.06 0.08 0.12 0.15 0.19 0.23 0.31 0.39 0.46 0.62 0.7 0.7 0.7 0.7

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.3 9

N 343 343 343 343 343 343 343 343 343 343 343 343 343 343 343

kgf 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

Gearmotor

Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 3-phase 15W 80 8 1/ 40 1/ 50 1/ 60
1/ 80 1/100 1/120 1/160 1/200

P.A152 P.A152 Fig.A-363 Fig.A-364 2kg 2.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A151.

Gearmotor
Fig.A-363
GT8M-8-5200-T15

Gearmotor with Brake


Fig.A-364
GT8B-8-5200-T15

300

168 28 12 34

300

206 28 12 34

76

15

8h6

94

80

80

15

8h6

94

80

3 32

4-5.5

80

8 300

3 32

4-5.5

80

Round Weight 2kg

CAD Data GT8M-8-T15

Round Weight 2.5kg

CAD Data GT8B-8-T15

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A152

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

25W

T25

200/200/220

50/60/60

0.24/0.22/0.22

1380/1640/1680

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 0.78 1.18 1.57 2.25 3.04 3.82 4.61 6.17 7.64 9.21 11.8 14.7 14.7 14.7 14.7 kgf m 0.08 0.12 0.16 0.23 0.31 0.39 0.47 0.63 0.78 0.94 1.2 1.5 1.5 1.5 1.5

60Hz N m 0.59 0.98 1.27 1.86 2.55 3.14 3.82 5.10 6.27 7.55 9.80 12.7 14.7 14.7 14.7 kgf m 0.06 0.10 0.13 0.19 0.26 0.32 0.39 0.52 0.64 0.77 1.0 1.3 1.5 1.5 1.5

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.3 9

N 392 441 490 588 588 588 588 588 588 588 588 588 588 588 588

kgf 40 45 50 60 60 60 60 60 60 60 60 60 60 60 60

Gearmotor

Gearmotor with Brake

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 3-phase 25W 80 10 1/ 40 1/ 50 1/ 60 1/ 80
1/100 1/120 1/160 1/200

P.A153 P.A153 Fig.A-365 Fig.A-366 2kg 2.5kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A151.

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Gearmotor
Fig.A-365
GT8M-10-5200-T25

Gearmotor with Brake


Fig.A-365
GT8B-10-5200-T25

300

168 28 25
10h6

34 11.5 4
94

300

206 28 25
10h6

34 11.5 4
94

76

15

80

80

15

80

Standard Motors

3 32

4-5.5

80

8 300

3 32

4-5.5

80

Cautions for Safety

Option

Round Weight 2kg

CAD Data GT8M-10-T25

Round Weight 2.5kg

CAD Data GT8B-10-T25

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

A153

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

40W

T40

200/200/220

50/60/60

0.35/0.29/0.13

1350/1620/1660

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 1.18 1.86 2.45 3.72 4.90 7.35 9.80 11.8 14.7 19.6 24.5 24.5 kgf m 0.12 0.19 0.25 0.38 0.5 0.75 1.0 1.2 1.5 2.0 2.5 2.5

60Hz N m 0.98 1.47 2.06 3.04 4.02 6.08 8.04 9.80 11.8 15.7 20.6 24.5 kgf m 0.1 0.15 0.21 0.31 0.41 0.62 0.82 1.0 1.2 1.6 2.1 2.5

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 60 45 36 30 22.5 18 15

N 441 490 539 588 637 686 735 735 735 735 735 735

kgf 45 50 55 60 65 70 75 75 75 75 75 75

Gearmotor

Gearmotor with Brake

1/ 10 1/ 15 1/ 20 3-phase 40W 90 12 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100


1/120

P.A154 P.A154 Fig.A-367 Fig.A-368 3kg 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A151.

Gearmotor
Fig.A-367
GT9M-12-5120-T40

Gearmotor with Brake


Fig.A-368
GT9B-12-5120-T40

300

172.5 27 25
12h6

36 13.5 4

300

209 27 25
12h6

36 13.5 4
10

90

18

4 10
9 3 32 4-6.5

90

94

18

90

90

9 300

3 32

4-6.5

90

Round Weight 3kg

CAD Data GT9M-12-T40

Round Weight 3.5kg

CAD Data GT9B-12-T40

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A154

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

60W

T60

200/200/220

50/60/60

0.45/0.38/0.40

1350/1620/1660

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 1.86 2.74 3.72 5.49 7.35 10.8 14.7 18.6 21.6 29.4 29.4 29.4 kgf m 0.19 0.28 0.38 0.56 0.75 1.1 1.5 1.9 2.2 3.0 3.0 3.0

60Hz N m 1.47 2.25 3.04 4.51 6.08 9.11 11.8 14.7 18.6 24.5 29.4 29.4 kgf m 0.15 0.23 0.31 0.46 0.62 0.93 1.2 1.5 1.9 2.5 3.0 3.0

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 60 45 36 30 22.5 18 15

N 490 490 539 588 637 686 735 735 735 735 735 735

kgf 50 50 55 60 65 70 75 75 75 75 75 75

Gearmotor

Gearmotor with Brake

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/ 10 1/ 15 1/ 20 3-phase 60W 90 15 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80
1/100 1/120

P.A155 Fig.A-369 3kg

P.A155 Fig.A370 3.5kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A151.

Gearmotor
Fig.A-369
GT9M-15-5120-T60

Gearmotor with Brake


Fig.A-370
GT9B-15-5120-T60

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

300

178.5 33 24
15h6

300 36 17 5 94 90

215 33 24
15h6

36 17 5
10

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

18

90

18

4 10
9 3 38 4-6.5

90

9 90 300

3 38

4-6.5

90
Standard Motors

Cautions for Safety

Round Weight 3kg

CAD Data GT9M-15-T60

Round Weight 3.5kg

CAD Data GT9B-15-T60

Option

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

A155

A156

Parallel Shaft

GT-Type

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

GT
Type
Parallel Shaft

Gearmotors with the flange mounting dimension compatible with the products of other domestic Japanese manufacturers.

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

A157

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed rpm Capacitor F Insulation Protective Classification system

S15 15W S15W

100/100 200/200

50/60 50/60

0.40/0.40 0.23/0.22

1380/1690 1380/1690

7 E 1.7

Double Voltage (Continuous Rated 4 Poles)

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 0.49 0.69 0.88 1.37 1.86 2.25 2.74 3.72 4.61 5.49 6.86 6.86 6.86 6.86 6.86 kgf m 0.05 0.07 0.09 0.14 0.19 0.23 0.28 0.38 0.47 0.56 0.7 0.7 0.7 0.7 0.7

60Hz N m 0.39 0.59 0.78 1.18 1.47 1.86 2.25 3.04 3.82 4.51 6.08 6.86 6.86 6.86 6.86 kgf m 0.04 0.06 0.08 0.12 0.15 0.19 0.23 0.31 0.39 0.46 0.62 0.7 0.7 0.7 0.7

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.3 9

N 343 343 343 343 343 343 343 343 343 343 343 343 343 343 343

kgf 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

Gearmotor

Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 15W 80 8 1/ 40 1/ 50 1/ 60
1/ 80 1/100 1/120 1/160 1/200

P.A158 P.A158 Fig.A-371 Fig.A-372 2kg 2.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A157.

Gearmotor
Fig.A-371
GT8M-8-5200-S15 GT8M-8-5200-S15W

Gearmotor with Brake


Fig.A-372
GT8B-8-5200-S15 GT8B-8-5200-S15W

300

168 28 12 34 300

206 28 12 34

76

15

8h6

94

80

80

15

8h6

94

80

3 32

4-5.5

80 300

3 32

4-5.5

80

Round Weight 2kg

CAD Data GT8M-8-S15 GT8M-8-S15W

Round Weight 2.5kg

CAD Data GT8B-8-S15 GT8B-8-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A158

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed rpm Capacitor F Insulation Protective Classification system
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

S25 25W S25W

100/100 200/200

50/60 50/60

0.55/0.54 0.30/0.27

1370/1680 1380/1680

9 E 2.2

Double Voltage (Continuous Rated 4 Poles)

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 0.78 1.18 1.57 2.25 3.04 3.82 4.61 6.17 7.64 9.21 11.8 14.7 14.7 14.7 14.7 kgf m 0.08 0.12 0.16 0.23 0.31 0.39 0.47 0.63 0.78 0.94 1.2 1.5 1.5 1.5 1.5

60Hz N m 0.59 0.98 1.27 1.86 2.55 3.14 3.82 5.10 6.27 7.55 9.80 12.7 14.7 14.7 14.7 kgf m 0.06 0.10 0.13 0.19 0.26 0.32 0.39 0.52 0.64 0.77 1.0 1.3 1.5 1.5 1.5

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 360 240 180 120 90 72 60 45 36 30 22.5 18 15 11.3 9

N 392 441 490 588 588 588 588 588 588 588 588 588 588 588 588

kgf 40 45 50 60 60 60 60 60 60 60 60 60 60 60 60

Gearmotor

Gearmotor with Brake

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 25W 80 10 1/ 40 1/ 50 1/ 60 1/ 80
1/100 1/120 1/160 1/200

P.A159 P.A159 Fig.A-373 Fig.A-374 2kg 2.5kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A157.

Gearmotor
Fig.A-373
GT8M-10-5200-S25 GT8M-10-5200-S25W

Gearmotor with Brake


Fig.A-374
GT8B-10-5200-S25 GT8B-10-5200-S25W

300

168 28 25
10h6

34 11.5 4
94

300

206 28 25
10h6

34 11.5 4
94

Standard Motors

76

15

80

80

15

80

Cautions for Safety

3 32

4-5.5

80 300

3 32

4-5.5

80

Option

Round Weight 2kg

GT8M-10-S25 CAD Data GT8M-10-S25W

Round Weight 2.5kg

CAD Data GT8B-10-S25 GT8B-10-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

A159

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed rpm Capacitor F Insulation Protective Classification system

S40 40W S40W

100/100 200/200

50/60 50/60

0.78/0.76 0.38/0.37

1390/1690 1400/1700

13 E 3.7

Double Voltage (Continuous Rated 4 Poles)

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 1.18 1.86 2.45 3.72 4.90 7.35 9.80 11.8 14.7 19.6 24.5 24.5 kgf m 0.12 0.19 0.25 0.38 0.5 0.75 1.0 1.2 1.5 2.0 2.5 2.5

60Hz N m 0.98 1.47 2.06 3.04 4.02 6.08 8.04 9.80 11.8 15.7 20.6 24.5 kgf m 0.1 0.15 0.21 0.31 0.41 0.62 0.82 1.0 1.2 1.6 2.1 2.5

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 60 45 36 30 22.5 18 15

N 441 490 539 588 637 686 735 735 735 735 735 735

kgf 45 50 55 60 65 70 75 75 75 75 75 75

Gearmotor

Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1-phase 40W 90 12 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100


1/120

P.A160 P.A160 Fig.A-375 Fig.A-376 3kg 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A157.

Gearmotor
Fig.A-375
GT9M-12-5120-S40 GT9M-12-5120-S40W

Gearmotor with Brake


Fig.A-376
GT9B-12-5120-S40 GT9B-12-5120-S40W

300

172.5 27 25
12h6

36 13.5 4
10

300

209 27 25
12h6

36 13.5

90

18

90

94

18

4
10

90

3 32

4-6.5

90 300

3 32

4-6.5

90

Round Weight 3kg

CAD Data GT9M-12-S40 GT9M-12-S40W

Round Weight 3.5kg

CAD Data GT9B-12-S40 GT9B-12-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

A160

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor Gearmotor with Brake


GTR Mini Series

GT-Type Parallel Shaft1-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Rated Current A Rated Rotation Speed rpm Capacitor F Insulation Protective Classification system
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

S60 60W S60W

100/100 200/200

50/60 50/60

1.20/1.18 0.60/0.57

1370/1680 1370/1670

20 E 5

Double Voltage (Continuous Rated 4 Poles)

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Size

Diameter of Output Reduction Ratio shaft

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

50Hz N m 1.86 2.74 3.72 5.49 7.35 10.8 14.7 18.6 21.6 29.4 29.4 29.4 kgf m 0.19 0.28 0.38 0.56 0.75 1.1 1.5 1.9 2.2 3.0 3.0 3.0

60Hz N m 1.47 2.25 3.04 4.51 6.08 9.11 11.8 14.7 18.6 24.5 29.4 29.4 kgf m 0.15 0.23 0.31 0.46 0.62 0.93 1.2 1.5 1.9 2.5 3.0 3.0

Output Shaft Allowable Page, Diagram No. of the Outer Dimension Diagram, Round Weight O.H.L

50Hz 1/ 1/ 5 7.5 300 200 150 100 75 50 37.5 30 25 18.8 15 12.5

60Hz 360 240 180 120 90 60 45 36 30 22.5 18 15

N 490 490 539 588 637 686 735 735 735 735 735 735

kgf 50 50 55 60 65 70 75 75 75 75 75 75

Gearmotor

Gearmotor with Brake

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/ 10 1/ 15 1/ 20 1-phase 60W 90 15 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80
1/100 1/120

P.A161 Fig.A-377 3kg

P.A161 Fig.A378 3.5kg

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page A157.

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Gearmotor
Fig.A-377
GT9M-15-5120-S60 GT9M-15-5120-S60W

Gearmotor with Brake


Fig.A-378
GT9B-15-5120-S60 GT9B-15-5120-S60W

300

215 33 24
15h6

36 17

300

215 33 24
15h6

36 17

Speed Control Gearmotor with Brake Technical Information

94

18

5
10

90

94

18

5
10

90
Standard Motors

3 38

4-6.5

90

9 300

3 38

4-6.5

90

Cautions for Safety

Option

Round Weight 3kg

CAD Data GT9M-15-S60 GT9M-15-S60W

Round Weight 3.5kg

CAD Data GT9B-15-S60 GT9B-15-S60W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole.

Model Code P.A148

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

A161

Right Angle Shaft

Gearmotor

H Type Gearmotor
Model and Type Designation Standard Model Lineup

Type
Right Angle Shaft

Gearmotor/Brake Motor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Water-Resistant(IP65) Gearmotor/Brake Motor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Speed Control Gearmotor Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram P. B85 P. B89 P. B59 P. B63 P. B77 P. B5 P. B9 P. B35

B1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Shaft Reduction Ratio Motor Capacity

H-TypeRight Angle Shaft

H-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

H H

L M F MN

15 22

L T

H L F M MN

30 450

: Foot Mount

T25 W K S40 C

T6

Series Name Classification by Mount Form

: H-Type Right Angle Shaft : Flange Mount Up to Frame 22 : With Motor : With Brake Motor : With Water-resistant Motor Output Shaft material:SUS420J2 : With Water-resistant Brake Motor Output Shaft material:SUS420J2 : With Speed Control Gearmotor U-Type With Controller : With Speed Control Gearmotor P-Type Controller Sells Separately

Classification by Motor Type

W V U P

Frame No. and Diameter of Output shaft

Output Shaft Diameter


L: Output shaft on the left viewing from input shaft side.
gearhead

Shaft Arrangement

Motor

R: Output shaft on the right viewing from input shaft side.

T: Output shaft on both side viewing from input shaft side.

Reduction Ratio

10 : 110 1800 : 11800 T15 T25 T40 T60 T90 S15 S25 S40 S60 S90 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz W : High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase 200V50Hz 200V60Hz T K C : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor Terminal box for Speed Control type motor

Motor Designation and Capacity

Option
Note 1: For the types stated below, manufacturing with double voltage is not feasible. Water-resistant motors 3-phase (Single-phase can be acceptable as a special order.) Note 2: Since the water-resistant motors are specifications with exclusive cab tyre cable, the optional terminal box cannot be attached. Note 3: Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

Blank : Standard Specifications

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position indicator for lead-wire, terminal box and cab tyre cable Refer to the indication mark list in P. E54 for details.

B2

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B3

Model and Type Designation

B4

Right Angle Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Model and Type Designation Standard Model Lineup

Type
Right Angle Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start 4 Continuous Rating

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Totally Enclosed non-ventilated or Totally Enclosed fan-cooled

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

B5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Shaft Reduction Ratio Motor Capacity

H-TypeRight Angle Shaft

H-Type gearmotors and gearmotor with brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

H H

L M F MN

15 22

L T

H L F M MN

30 450

: Foot Mount

T25 W K S40 C

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft

: H-Type Right Angle Shaft : Flange Mount Up to Frame 22 : With Motor : With Brake Motor

Output Shaft Diameter


L: Output shaft on the left viewing from input shaft side.
gearhead

Shaft Arrangement

Motor

R: Output shaft on the right viewing from input shaft side.

T: Output shaft on both side viewing from input shaft side.

Reduction Ratio

10 : 110 1800 : 11800 T15 T25 T40 T60 T90 S15 S25 S40 S60 S90 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz W : High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase 200V50Hz 200V60Hz : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Mark for Additional Specs.

Motor Designation and Capacity

Blank : Standard Specifications

Option T K C Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

B6

Model and Type Designation

Standard Model Lineup


Foot Mount type Flange Mount type Up to Frame 22

Type

4P Motor Capacity

Frame Number

Output Shaft Arrangement

Reduction Ratio
1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

3-Phase 15W 1-Phase 15W

15 22

L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

15 3-Phase 25W 22 1-Phase 25W 28

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

15 18 3-Phase 40W 22 Gearmotor HLMHFM


Note 1

1/100 1/120

Gearmotor with Brake

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 40W 28 32
Note 2

Gearmotor with Brake HLMNHFMN


Note 1

With Waterresistant Brake Motor

15 18 3-Phase 60W 22 1-Phase 60W 28 32

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Standard Motors

18 3-Phase 90W 1-Phase 90W 28 32 40

1/100 1/120 1/160 1/200 1/240

Cautions for Safety

1/300 1/375 1/450


Option

1/600 1/750 1/900 1/1200 1/1500 1/1800

Note 1) The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) 2) The frame number will be "18" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "18" only. 3) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

B7

B8

Right Angle Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

Type
Right Angle Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E30, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)

L-shaft

R-shaft

T-shaft

B9

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T15 15W T15W

200/200/220 380/400/400/440

50/60/60 50/50/60/60

15 22 15 22

0.14/0.13/0.13 0.14/0.13/0.13 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11

1350/1550/1600 1350/1550/1600 1400/1400/1700/1700 1400/1400/1700/1700 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98.0

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 180 180 180

HLM

HFM

HLMN

HFMN

P.B11 Fig.B-1 3kg

P.B11 Fig.B-3 3kg

P.B12 Fig.B-5 3kg

P.B12 Fig.B-7 3kg

1/ 100 1/ 120 3-phase 15W 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 22 1/ 750 1/ 900 1/1200 1/1500 1/1800

P.B11 Fig.B-2 6kg

P.B11 Fig.B-4 6kg

P.B12 Fig.B-6 6kg

P.B12 Fig.B-8 6kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.

B10

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 15W
Foot Mount Type Gearmotor
Fig.B-1
HLM-15 R -10240-T15 T L HLM-15 R -10240-T15W T
128 178 300 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-2

HLM-22 R -3001800-T15 T L HLM-22 R -3001800-T15W T


180

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

27 24

64

64

27 24
15h6

304.5 300 53
22h6

40 35

90

90

40 35
22h6

76

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

LRT -T15 CAD Data HLM-15 HLM-15 LRT -T15W

Round Weight 6kg

LRT -T15 CAD Data HLM-22 HLM-22 LRT -T15W

Gearmotor with Brake

Flange Mount Type Gearmotor


Fig.B-3
HFM-15 R -10240-T15 T L HFM-15 R -10240-T15W T
L

With Waterresistant Brake Motor


L

Fig.B-4

HFM-22 R -3001800-T15 T L HFM-22 R -3001800-T15W T

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

24 178 300 42.5 30 76 22.3 17 32 85 32 5 102 56 4-6.5


15h6

128 40 64 27 24
15h6

32 308.5 57 300 42 76 41.5 24.5 45 114 45 6 144 78 4-11


22h6

180 58 90 40 35
22h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

24 27 9

35 40

1 1

4.5

12

Round Weight 3kg

LRT -T15 CAD Data HFM-15 HFM-15 LRT -T15W

Round Weight 6kg

LRT -T15 CAD Data HFM-22 HFM-22 LRT -T15W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B11

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 15W
Foot Mount Type Gearmotor with Brake
Fig.B-5
HLMN-15R -10240-T15 T L HLMN-15R -10240-T15W T
128 216 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-6
64

HLMN-22R -3001800-T15 T L HLMN-22R -3001800-T15W T


180

300

27 24

64

27 24
15h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 80

41.5 24.5 300

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

LRT -T15 CAD Data HLMN-15 HLMN-15 LRT -T15W

Round Weight 6kg

LRT -T15 CAD Data HLM-22 HLM-22 LRT -T15W

Flange Mount Type Gearmotor with Brake


Fig.B-7
HFMN-15R -10240-T15 T L HFMN-15R -10240-T15W T
L

Fig.B-8

HFMN-22R -3001800-T15 T L HFMN-22R -3001800-T15W T

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

128 40 64 27 24
15h6

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

102

24 27 9

144

35 40

1 1

4.5

12

Round Weight 3kg

LRT -T15 CAD Data HFMN-15 HFMN-15 LRT -T15W

Round Weight 6kg

LRT -T15 CAD Data HFMN-22 HFMN-22 LRT -T15W

B12

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B13

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 25W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

15
Standard Voltage (Continuous Rated 4 Poles)

0.21/0.19/0.19 0.21/0.19/0.19 0.18/0.17/0.17 0.11/0.12/0.11/0.12 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09

1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1400/1600/1650 1350/1400/1600/1650 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

T25 25W

200/200/220

50/60/60

22 28 15

Double Voltage (Continuous Rated 4 Poles)

T25W

380/400/400/440

50/50/60/60

22 28

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 108 137 167

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 280 280 280

HLM

HFM

HLMN

HFMN

P.B15 Fig.B-9 3kg

P.B15 Fig.B-12 3kg

P.B16 Fig.B-14 3kg

P.B16 Fig.B-17 3kg

1/ 100 1/ 120 3-phase 25W 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 22 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 28 1/1500 1/1800

P.B15 Fig.B-10 6kg

P.B15 Fig.B-13 6kg

P.B16 Fig.B-15 6kg

P.B16 Fig.B-18 6kg

P.B15 Fig.B-11 9kg

P.B16 Fig.B-16 9kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.

B14

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 25W
Foot Mount Type Gearmotor
Fig.B-9
HLM-15 R -10240-T25 T L HLM-15 R -10240-T25W T
128 178 300 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-10

HLM-22 R -300900-T25 T L HLM-22 R -300900-T25W T


180

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

27 24

64

64

27 24
15h6

304.5 300 53
22h6

40 35

90

90

40 35
22h6

76

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg


L

HLM-15 LRT -T25 CAD Data HLM-15 LRT -T25W

Round Weight 6kg

HLM-22 LRT -T25 CAD Data HLM-22 LRT -T25W

Gearmotor with Brake

Fig.B-11

HLM-28 R -12001800-T25 T L HLM-28 R -12001800-T25W T

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

200 339 300 62.5


28h6

45 40

100

100 45 40
28h6

49 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake
L

80 125

Round Weight 9kg

HLM-28 LRT -T25 CAD Data HLM-28 LRT -T25W

Flange Mount Type Gearmotor


Fig.B-12
HFM-15 R -10240-T25 T L HFM-15 R -10240-T25W T
128 40 64 27 24 300 30 76 22.3 17 32 85 32 5 102 56 4-6.5
15h6 15h6
L

Fig.B-13

HFM-22 R -300900-T25 T L HFM-22 R -300900-T25W T


180 58 90 40 35

Technical Information

Standard Motors

24 178 300 42.5

32 308.5 57 42 76 41.5 24.5 45 114 45 6 144 78 4-11


22h6

Cautions for Safety

Option

22h6

24 27 9

35 40

1 1

4.5

12

Round Weight 3kg

HFM-15 LRT -T25 CAD Data HFM-15 LRT -T25W

Round Weight 6kg

HFM-22 LRT -T25 CAD Data HFM-22 LRT -T25W

B15

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 25W
Foot Mount Type Gearmotor with Brake
Fig.B-14
HLMN-15R -10240-T25 T L HLMN-15R -10240-T25W T
128 216 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-15
64

HLMN-22 R -300900-T25 T L HLMN-22 R -300900-T25W T


180

300

27 24

64

27 24
15h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 80

41.5 24.5 300

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

HLMN-15 LRT -T25 CAD Data HLMN-15 LRT -T25W


L

Round Weight 6kg

LRT -T25 CAD Data HLMN-22 HLMN-22 LRT -T25W

Fig.B-16

HLMN-28 R -12001800-T25 T L HLMN-28 R -12001800-T25W T


200 375.5 62.5
28h6

45 40

100

100 45 40
28h6

300

49 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 9kg

HLMN-28 LRT -T25 CAD Data HLMN-28 LRT -T25W

Flange Mount Type Gearmotor with Brake


Fig.B-17
HFMN-15R -10240-T25 T L HFMN-15R -10240-T25W T
128 40 64 27 24
15h6
L

Fig.B-18

HFMN-22R -300900-T25 T L HFMN-22R -300900-T25W T


180 58 90 40 35
22h6

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

102

24 27 9

144

35 40

1 1

4.5

12

Round Weight 3kg

HFMN-15 LRT -T25 CAD Data HFMN-15 LRT -T25W

Round Weight 6kg Option P.E110

HFMN-22 LRT -T25 CAD Data HFMN-22 LRT -T25W

B16

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B17

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 40W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

15 18
Standard Voltage (Continuous Rated 4 Poles)

0.29/0.27/0.27 0.27/0.26/0.26 0.29/0.27/0.27 0.27/0.26/0.26 0.27/0.26/0.26 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14

1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1550 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 E
Totally Enclosed or Totally Enclosed Fan-cooled

T40

200/200/220

50/60/60

22 28 32 15 18

40W

Double Voltage (Continuous Rated 4 Poles)

T40W

380/400/400/440

50/50/60/60

22 28 32

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 118 137 176 225 274

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140 180 180 180 280 280 280 520 520 520

HLM

HFM

HLMN

HFMN

P.B19 Fig.B-19 Fig.B-20


400V

P.B20 Fig.B-26 Fig.B-27


400V

3kg

3kg

P.B21 Fig.B-31 3kg

P.B22 Fig.B-36 3kg

1/ 100 1/ 120 3-phase 40W 18 1/ 160 1/ 200 1/ 240 1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.B19 Fig.B-21 4kg


P.B19 Fig.B-22 Fig.B-23
400V

P.B20 Fig.B-28 4kg


P.B20 Fig.B-29 Fig.B-30
400V

P.B21 Fig.B-32 4kg P.B21 Fig.B-33 6kg P.B21 Fig.B-34 9kg P.B21 Fig.B-35 15kg

P.B22 Fig.B-37 4kg P.B22 Fig.B-38 6kg

6kg

6kg

P.B19 Fig.B-24 9kg P.B19 Fig.B-25 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.

B18

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 40W
Foot Mount Type Gearmotor
Fig.B-19
300
Foot Mount type

HLM-15 -10120-T40
128 178 42.5
15h6

L R T

Fig.B-20
64 27 24
15h6

HLM-15 -10120-T40W
128 216 42.5
15h6

L R T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

27 24

64

300

27 24

64

64

27 24
15h6

76

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 80

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65

24

24

Round Weight 3kg

CAD Data HLM-15 LRT -T40


L R T L R T

Round Weight 3kg

CAD Data HLM-15 LRT -T40W

Fig.B-21
300

HLM-18 -160240-T40 HLM-18 -160240-T40W


148 194 50.5
18h6

30 27

74

74

30 27
18h6

With Waterresistant Brake Motor Speed Control Gearmotor

90

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Round Weight 4kg

LRT -T40 CAD Data HLM-18 HLM-18 LRT -T40W

With Waterresistant Brake Motor

Fig.B-22
300

HLM-22 R -300450-T40 T
180 304.5 53
22h6

Fig.B-23
90 40 35
22h6

HLM-22 R -300450-T40W T
180 342.5 40 35
22h6

Speed Control Gearmotor

40 35

90

90

90

300

53

40 35
22h6

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76

41.5 24.5

6 150

.5 114

41.5 12 105 80 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

70 106

45 4-11

90 116

45

70 106

Round Weight 6kg


L

CAD Data HLM-22 LRT -T40

Round Weight 6kg


L

CAD Data HLM-22 LRT -T40W

Standard Motors

Fig.B-24
300

HLM-28 R -600900-T40 T L HLM-28 R -600900-T40W T


200 339 62.5
28h6

Fig.B-25
300

HLM-32 R -12001800-T40 T L HLM-32 R -12001800-T40W T


240 76 10 58
32h6

Cautions for Safety

Option

45 40

100

100 45 40

358
28h6

120 55 50

120

55 50

32h6

49 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

90

205 35 60 4-13

1 27
18 120 150 60 140

80 125

95 152

Round Weight 9kg

LRT -T40 CAD Data HLM-28 HLM-28 LRT -T40W

Round Weight 15kg

LRT -T40 CAD Data HLM-32 HLM-32 LRT -T40W

B19

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 40W
Flange Mount Type Gearmotor
Fig.B-26
HFM-15 R -10120-T40 T
L

Flange Mount type Up to Frame 22

Fig.B-27

HFM-15 R -10120-T40W T

24 178 300 42.5 30 76 22.3 17 32 85 32 5 102 56 4-6.5


15h6

128 40 64 27 24
15h6

24 216 300 42.5 30 80 22.3 17 5 102 56 4-6.5


15h6

128 40 64 27 24
15h6

24 27 9

24 27 9

32 85

32

Round Weight 3kg


L

CAD Data HFM-15 LRT -T40

Round Weight 3kg

CAD Data HFM-15 LRT -T40W

Fig.B-28

HFM-18 R -160240-T40 T L HFM-18 R -160240-T40W T

26 194 300 50.5 35 90 25.7 20.5 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

27 30 10

Round Weight 4kg

LRT -T40 CAD Data HFM-18 HFM-18 LRT -T40W

Fig.B-29

HFM-22 R -300450-T40 T

Fig.B-30
180

HFM-22 R -300450-T40W T

32 308.5 57 300 42 76 41.5 24.5 45 114 45 6 144 78 4-11


22h6

58

90

32 40 35
22h6

180 58 90 40 35
22h6

346.5 57 300 42 80 41.5 24.5 45 114 45 6 78 4-11


22h6

35 40

1 1

4.5

144

35 40

1 1

4.5

12

12

Round Weight 6kg

CAD Data HFM-22 LRT -T40

Round Weight 6kg Option P.E110

CAD Data HFM-22 LRT -T40W

B20

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.B-31
HLMN-15R -10120-T40 T L HLMN-15R -10120-T40W T
L L

Foot Mount type

Fig.B-32

HLMN-18R -160240-T40 T L HLMN-18R -160240-T40W T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

128 216 42.5


15h6

300

27 24

64

64

27 24
15h6

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

24

Round Weight 3kg

LRT -T40 CAD Data HLMN-15 HLMN-15 LRT -T40W


L R T L R T

Round Weight 4kg

LRT -T40 CAD Data HLMN-18 HLMN-18 LRT -T40W


L R T L R T

Fig.B-33

HLMN-22 -300450-T40 HLMN-22 -300450-T40W

Fig.B-34

HLMN-28 -600900-T40 HLMN-28 -600900-T40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

180 342.5 300 53


22h6

200 90 40 35
22h6

40 35

90

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

Gearmotor with Brake

41.5 80 24.5 300

6 150

.5 114

49 12 105 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

70 106

45 4-11

90 116

45

80 125

Round Weight 6kg

LRT -T40 CAD Data HLMN-22 HLMN-22 LRT -T40W


L

Round Weight 9kg

LRT -T40 CAD Data HLMN-28 HLMN-28 LRT -T40W

Speed Control Gearmotor with Brake Technical Information

Fig.B-35

HLMN-32 R -12001800-T40 T L HLMN-32 R -12001800-T40W T

Standard Motors

240 394.5 300 10 58 94 35 300 60 4-13 205 76


32h6

120 55 50

120

55 50
32h6

Cautions for Safety

Option

1 27
18 120 150 60 140

95 152

Round Weight 15kg CAD Data HLMN-32 LRT -T40W

HLMN-32 LRT -T40

B21

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.B-36
HFMN-15R -10120-T40 T L HFMN-15R -10120-T40W T
L L

Flange Mount type Up to Frame 22

Fig.B-37

HFMN-18R -160240-T40 T L HFMN-18R -160240-T40W T

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

128 40 64 27 24
15h6

26 230.5 300 50.5 35 94 25.7 20.5 300 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

102

24 27 9

27 30 10

Round Weight 3kg

LRT -T40 CAD Data HFMN-15 HFMN-15 LRT -T40W


L

Round Weight 4kg

LRT -T40 CAD Data HFMN-18 HFMN-18 LRT -T40W

Fig.B-38

HFMN-22R -300450-T40 T L HFMN-22R -300450-T40W T

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

144

35 40

1 1

4.5

12

Round Weight 6kg

LRT -T40 CAD Data HFMN-22 HFMN-22 LRT -T40W

B22

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B23

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 60W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

15 18
Standard Voltage (Continuous Rated 4 Poles)

0.42/0.39/0.39 0.40/0.36/0.36 0.42/0.39/0.39 0.40/0.36/0.36 0.40/0.36/0.36 0.17/0.17/0.17/0.17 0.20/0.20/0.20/0.20 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17

1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1300/1350/1550/1600 1250/1300/1500/1550 1300/1350/1550/1600 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

T60

200/200/220

50/60/60

22 28 32 18 22 28 32

60W
Double Voltage (Continuous Rated 4 Poles)

T60W

380/400/400/440

50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 15 18 1/ 1/ 1/ 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 176 216 284 353 421

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140 180 180 180 280 280 280 520 520 520

HLM

HFM

HLMN

HFMN

P.B25 Fig.B-39 3kg Fig.B-40 4kg

P.B26 Fig.B-44 3kg Fig.B-45 4kg

P.B27 Fig.B-47 3kg Fig.B-48 4kg

P.B28 Fig.B-52 3kg Fig.B-53 4kg

Frame No.18 Frame No.18 Frame No.18 Frame No.18

1/ 100 3-phase 60W 18 1/ 120 1/ 160 1/ 200


1/ 240

P.B25 Fig.B-40 4kg

P.B26 Fig.B-45 4kg

P.B27 Fig.B-48 4kg

P.B28 Fig.B-53 4kg

1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.B25 Fig.B-41 6kg P.B25 Fig.B-42 9kg P.B25 Fig.B-43 15kg

P.B26 Fig.B-46 6kg

P.B27 Fig.B-49 6kg P.B27 Fig.B-50 9kg P.B27 Fig.B-51 15kg

P.B28 Fig.B-54 6kg

Note) As for reduction ratio 1/15 to 1/60, the frame number will be "15" for the standard voltage, "18" for the other voltage. The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.

B24

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 60W
Foot Mount Type Gearmotor
Fig.B-39
HLM-15 -1060-T60
L R T

Foot Mount type

Fig.B-40
128

HLM-18 R -80240-T60 T L HLM-18 R -10240-T60W T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

300

216

42.5
15h6

27 24

64

64

27 24
15h6

148 300 194 50.5


18h6

30 27

74

74

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

80

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 90

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

24

Round Weight 3kg

CAD Data HLM-15 LRT -T60


L R T L R T

Round Weight 4kg

HLM-18 LRT -T60 CAD Data HLM-18 LRT -T60W


L R T L R T

Fig.B-41

HLM-22 -300450-T60 HLM-22 -300450-T60W

Fig.B-42

HLM-28 -600900-T60 HLM-28 -600900-T60W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

180 342.5 300 53


22h6

200 90 40 35
22h6

40 35

90

339 300

62.5
28h6

45 40

100

100 45 40
28h6

Gearmotor with Brake

41.5 80 24.5

6 150

.5 114

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

49 12 105 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

70 106

45 4-11

90 116

45

80 125

Round Weight 6kg


L

LRT -T60 CAD Data HLM-22 HLM-22 LRT -T60W

Round Weight 9kg

LRT -T60 CAD Data HLM-28 HLM-28 LRT -T60W

Speed Control Gearmotor with Brake Technical Information

Fig.B-43

HLM-32 R -12001800-T60 T L HLM-32 R -12001800-T60W T

Standard Motors

240 358 300 10 58 90 35 60 4-13 205 76


32h6

120 55 50

120

Cautions for Safety

55 50
32h6
Option

1 27
18 120 150 60 140

95 152

Round Weight 15kg

HLM-32 LRT -T60 CAD Data HLM-32 LRT -T60W

B25

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 60W
Flange Mount Type Gearmotor
L

Flange Mount type Up to Frame 22

Fig.B-44

HFM-15 -1060-T60

L R T

Fig.B-45
128 40 64 27 24
15h6

HFM-18 R -80240-T60 T L HFM-18 R -10240-T60W T

24 216 300 42.5 30 80 22.3 17 32 85 32 5 102 56 4-6.5


15h6

26 194 300 50.5 35 90 25.7 20.5 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

24 27 9

27 30 10

40

40 101

Round Weight 3kg


L

CAD Data HFM-15 LRT -T60

Round Weight 4kg

LRT -T60 CAD Data HFM-18 HFM-18 LRT -T60W

Fig.B-46

HFM-22 R -300450-T60 T L HFM-22 R -300450-T60W T

32 346.5 57 300 42 80 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

144

35 40

1 1

4.5

12

Round Weight 6kg

LRT -T60 CAD Data HFM-22 HFM-22 LRT -T60W

B26

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 60W
Foot Mount Type Gearmotor with Brake
Fig.B-47
HLMN-15 -1060-T60
L R T

Foot Mount type

Fig.B-48
128

HLMN-18R -80240-T60 T L HLMN-18R -10240-T60W T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

300

216

42.5
15h6

27 24

64

64

27 24
15h6

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

24

Round Weight 3kg

CAD Data HLMN-15 LRT -T60


L R T L R T

Round Weight 4kg

HLMN-18 LRT -T60 CAD Data HLMN-18 LRT -T60W


L R T L R T

Fig.B-49

HLMN-22 -300450-T60 HLMN-22 -300450-T60W

Fig.B-50

HLMN-28 -600900-T60 HLMN-28 -600900-T60W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

180 342.5 300 53


22h6

200 90 40 35
22h6

40 35

90

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

Gearmotor with Brake

41.5 80 24.5 300

6 150

.5 114

49 12 105 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

70 106

45 4-11

90 116

45

80 125

Round Weight 6kg

HLMN-22 LRT -T60 CAD Data HLMN-22 LRT -T60W


L

Round Weight 9kg

HLMN-28 LRT -T60 CAD Data HLMN-28 LRT -T60W

Speed Control Gearmotor with Brake Technical Information

Fig.B-51

HLMN-32 R -12001800-T60 T L HLMN-32 R -12001800-T60W T

Standard Motors

240 394.5 300 10 58 94 35 300 60 4-13 205 76


32h6

120 55 50

120

Cautions for Safety

55 50
32h6
Option

1 27
18 120 150 60 140

95 152

Round Weight 15kg

LRT -T60 CAD Data HLMN-32 HLMN-32 LRT -T60W

B27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 60W
Flange Mount Type Gearmotor with Brake
L

Flange Mount type Up to Frame 22

Fig.B-52

HFMN-15 -1060-T60

L R T

Fig.B-53
128

HFMN-18R -80240-T60 T L HFMN-18R -10240-T60W T

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

40

64

26 27 24
15h6

148 48 74 30 27
18h6

230.5 300

50.5 35
18h6

102

24 27 9

94

25.7 20.5 300 40

118 65 4-8.5

27 30 10

40 101

Round Weight 3kg


L

CAD Data HFMN-15 LRT -T60

Round Weight 4kg

LRT -T60 CAD Data HFMN-18 HFMN-18 LRT -T60W

Fig.B-54

HFMN-22R -300450-T60 T L HFMN-22R -300450-T60W T

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

144

35 40

1 1

4.5

12

Round Weight 6kg

LRT -T60 CAD Data HFMN-22 HFMN-22 LRT -T60W

B28

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B29

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 90W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

18
Standard Voltage (Continuous Rated 4 Poles)

0.51/0.48/0.48 0.51/0.48/0.48 0.51/0.48/0.48 0.47/0.47/0.47 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24

1350/1550/1550 1350/1550/1550 1350/1550/1550 1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 E


Totally Enclosed or Totally Enclosed Fan-cooled

T90 90W

200/200/220

50/60/60

28 32 40 18 28 32 40

Double Voltage (Continuous Rated 4 Poles)

T90W

380/400/400/440

50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 18 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

HLM

HFM

HLMN

HFMN

P.B31 Fig.B-55 Fig.B-56


400V

P.B32 Fig.B-62 Fig.B-63


400V

4kg

4kg

P.B33 Fig.B-64 4kg

P.B33 Fig.B-68 4kg

1/ 100 1/ 120 3-phase 90W


1/ 160 1/ 200 1/ 240

1/ 300 28 1/ 375 1/ 450 1/ 600 32 1/ 750 1/ 900 1/1200 40 1/1500 1/1800

P.B31 Fig.B-57 Fig.B-58


400V

9kg P.B31 Fig.B-59 Fig.B-60


400V

P.B33 Fig.B-65 9kg P.B33 Fig.B-66 15kg P.B33 Fig.B-67 22kg

15kg

P.B31 Fig.B-61 22kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.

B30

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 90W
Foot Mount Type Gearmotor
Fig.B-55
300
Foot Mount type

HLM-18 -10240-T90
148 194 50.5
18h6

L R T

Fig.B-56
74 30 27
18h6

HLM-18 -10240-T90W
148 230.5 74 74

L R T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

30 27

74

300

50.5
18h6

30 27

30 27
18h6

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

90

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

94

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

Round Weight 4kg

CAD Data HLM-18 LRT -T90

Round Weight 4kg

CAD Data HLM-18 LRT -T90W

Fig.B-57
300

HLM-28 R -300450-T90 T
200 339 62.5
28h6

Fig.B-58
100 45 40
28h6

HLM-28 R -300450-T90W T
200 375.5 62.5
28h6

45 40

100

45 40

100

100 45 40
28h6

300

With Waterresistant Brake Motor Speed Control Gearmotor

49 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

49 94 31

8 174.5

1 27
15 50 4-11 100 126 50 120

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

80 125

80 125

Round Weight 9kg

CAD Data HLM-28 LRT -T90

Round Weight 9kg

CAD Data HLM-28 LRT -T90W


With Waterresistant Brake Motor

Fig.B-59
358 300

HLM-32 R -600900-T90 T
240 76 10 58
32h6

Fig.B-60
120 55 50
32h6

HLM-32 R -600900-T90W T
240 394.5 76 10 58
32h6

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

120 55 50

120 55 50

120

55 50
32h6

300

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

90

205 35 60 4-13

1 27
18 120 150 60 140

94

205 35 60 4-13

1 27
18 120 150 60 140

95 152

95 152

Round Weight 15kg


L

CAD Data HLM-32 LRT -T90

Round Weight 15kg

CAD Data HLM-32 LRT -T90W

Standard Motors

Fig.B-61
300

HLM-40 R -12001800-T90 T L HLM-40 R -12001800-T90W T


280 400 90 12
40h6

Cautions for Safety

Option

140 65 60

140

65 60

40h6

106

68.5 43

242.5

1 42
20 70 4-15 140 180 70 165

120 180

Round Weight 22kg

HLM-40 LRT -T90 CAD Data HLM-40 LRT -T90W

B31

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft3-Phase 90W
Flange Mount Type Gearmotor
Fig.B-62
HFM-18 R -10240-T90 T
L

Flange Mount type Up to Frame 22

Fig.B-63
148 74

HFM-18 R -10240-T90W T

26 194 300 50.5 35 90 25.7 20.5 40 40 101 6 118 65 4-8.5


18h6

48

26 30 27
18h6

148 48 74 30 27
18h6

230.5 300

50.5 35
18h6

27 30 10

94

25.7 20.5 40

118 65 4-8.5

27 30 10

40 101

Round Weight 4kg

CAD Data HFM-18 LRT -T90

Round Weight 4kg

CAD Data HFM-18 LRT -T90W

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

B32

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 90W
Foot Mount Type Gearmotor with Brake
Fig.B-64
HLMN-18R -10240-T90 T L HLMN-18R -10240-T90W T
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-65

HLMN-28R -300450-T90 T L HLMN-28R -300450-T90W T


200

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

49 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg

LRT -T90 CAD Data HLMN-18 HLMN-18 LRT -T90W


L

Round Weight 9kg

LRT -T90 CAD Data HLMN-28 HLMN-28 LRT -T90W


L

Gearmotor with Brake

Fig.B-66

HLMN-32R -600900-T90 T L HLMN-32R -600900-T90W T


240 394.5 76 10 58
32h6

Fig.B-67

HLMN-40 R -12001800-T90 T L HLMN-40 R -12001800-T90W T


280

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

120 55 50

120

55 50
32h6

437 300

90 12
40h6

140 65 60

140

65 60
40h6

300

94

205 35

1 27
18 60 4-13 120 150 60 140

68.5 110 43 300

242.5

1 42
20 70 4-15 140 180 70 165

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

300

95 152

120 180

Round Weight 15kg

LRT -T90 CAD Data HLMN-32 HLMN-32 LRT -T90W

Round Weight 22kg

HLMN-40 LRT -T90 CAD Data HLMN-40 LRT -T90W

Flange Mount Type Gearmotor with Brake


Fig.B-68
HFMN-18R -10240-T90 T L HFMN-18R -10240-T90W T
L

Standard Motors

26 230.5 300 50.5 35 94 25.7 20.5 300 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

Cautions for Safety

Option

27 30 10

Round Weight 4kg

LRT -T90 CAD Data HFMN-18 HFMN-18 LRT -T90W

B33

B34

Right Angle Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

Type
Right Angle Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E30, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)

L-shaft

R-shaft

T-shaft

B35

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

15 22 15 22

0.39/0.35 0.39/0.35 0.21/0.19 0.21/0.19

1350/1650 1350/1650 1350/1650 1350/1650

5 5 1.2 1.2 E
Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98.0

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 180 180 180

HLM

HFM

HLMN

HFMN

P.B37 Fig.B-69 3kg

P.B37 Fig.B-71 3kg

P.B38 Fig.B-73 3kg

P.B38 Fig.B-75 3kg

1/ 100 1/ 120 1-phase 15W 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 22 1/ 750 1/ 900 1/1200 1/1500 1/1800

P.B37 Fig.B-70 6kg

P.B37 Fig.B-72 6kg

P.B38 Fig.B-74 6kg

P.B38 Fig.B-76 6kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.

B36

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 15W
Foot Mount Type Gearmotor
Fig.B-69
HLM-15 R -10240-S15 T L HLM-15 R -10240-S15W T
128 178 300 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-70

HLM-22 R -3001800-S15 T L HLM-22 R -3001800-S15W T


180

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

27 24

64

64

27 24
15h6

304.5 300 53
22h6

40 35

90

90

40 35
22h6

76

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

HLM-15 LRT -S15 CAD Data HLM-15 LRT -S15W

Round Weight 6kg

HLM-22 LRT -S15 CAD Data HLM-22 LRT -S15W

Gearmotor with Brake

Flange Mount Type Gearmotor


Fig.B-71
HFM-15 R -10240-S15 T L HFM-15 R -10240-S15W T
128 40 64 27 24
15h6
L

With Waterresistant Brake Motor


L

Fig.B-72

HFM-22 R -3001800-S15 T L HFM-22 R -3001800-S15W T


180 58 90 40 35
22h6

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

24 178 300 42.5 30 76 22.3 17 32 85 32 5 102 56 4-6.5


15h6

32 308.5 57 300 42 76 41.5 24.5 45 114 45 6 144 78 4-11


22h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

24 27 9

35 40

1 1

4.5

12

Round Weight 3kg

LRT -S15 CAD Data HFM-15 HFM-15 LRT -S15W

Round Weight 6kg

LRT -S15 CAD Data HFM-22 HFM-22 LRT -S15W

Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B37

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 15W
Foot Mount Type Gearmotor with Brake
Fig.B-73
HLMN-15R -10240-S15 T L HLMN-15R -10240-S15W T
128 216 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-74
64

HLMN-22R -3001800-S15 T L HLMN-22R -3001800-S15W T


180

300

27 24

64

27 24
15h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 80

41.5 24.5 300

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

LRT -S15 CAD Data HLMN-15 HLMN-15 LRT -S15W

Round Weight 6kg

LRT -S15 CAD Data HLMN-22 HLMN-22 LRT -S15W

Flange Mount Type Gearmotor with Brake


Fig.B-75
HFMN-15R -10240-S15 T L HFMN-15R -10240-S15W T
24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5
15h6
L

Fig.B-76
64

HFMN-22R -3001800-S15 T L HFMN-22R -3001800-S15W T


32 180 58 90 40 35
22h6

128 40 27 24
15h6

346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

102

24 27 9

144

35 40

1 1

4.5

12

Round Weight 3kg

HFMN-15 LRT -S15 CAD Data HFMN-15 LRT -S15W

Round Weight 6kg

HFMN-22 LRT -S15 CAD Data HFMN-22 LRT -S15W

B38

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B39

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 25W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15
Standard Voltage (Continuous Rated 4 Poles)

0.48/0.48 0.48/0.48 0.44/0.45 0.26/0.25 0.26/0.25 0.23/0.24

1350/1600 1350/1600 1350/1650 1350/1600 1350/1600 1350/1650

7 7 7 1.7 1.7 1.7 E


Totally Enclosed or Totally Enclosed Fan-cooled

S25 25W

100/100

50/60

22 28 15

Double Voltage (Continuous Rated 4 Poles)

S25W

200/200

50/60

22 28

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 108 137 167

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 280 280 280

HLM

HFM

HLMN

HFMN

P.B41 Fig.B-77 3kg

P.B41 Fig.B-80 3kg

P.B42 Fig.B-82 3kg

P.B42 Fig.B-85 3kg

1/ 100 1/ 120 1-phase 25W 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 22 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 28 1/1500 1/1800

P.B41 Fig.B-78 6kg

P.B41 Fig.B-81 6kg

P.B42 Fig.B-83 6kg

P.B42 Fig.B-86 6kg

P.B41 Fig.B-79 9kg

P.B42 Fig.B-84 9kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.

B40

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 25W
Foot Mount Type Gearmotor
Fig.B-77
HLM-15 R -10240-S25 T L HLM-15 R -10240-S25W T
128 178 300 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-78
64

HLM-22 R -300900-S25 T L HLM-22 R -300900-S25W T


180

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

27 24

64

27 24
15h6

304.5 300 53
22h6

40 35

90

90

40 35
22h6

76

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg


L

LRT -S25 CAD Data HLM-15 HLM-15 LRT -S25W

Round Weight 6kg

LRT -S25 CAD Data HLM-22 HLM-22 LRT -S25W

Gearmotor with Brake

Fig.B-79

HLM-28 R -12001800-S25 T L HLM-28 R -12001800-S25W T


200 339 62.5
28h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

45 40

100

100 45 40
28h6

300

49 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake
L

80 125

Round Weight 9kg

LRT -S25 CAD Data HLM-28 HLM-28 LRT -S25W

Flange Mount Type Gearmotor


Fig.B-80
HFM-15 R -10240-S25 T L HFM-15 R -10240-S25W T
128 40 64 27 24
15h6
L

Fig.B-81

HFM-22 R -300900-S25 T L HFM-22 R -300900-S25W T


180 58 90 40 35

Technical Information

Standard Motors

24 178 300 42.5 30 76 22.3 17 32 85 32 5 102 56 4-6.5


15h6

32 308.5 57 300 42 76 41.5 24.5 45 114 45 6 144 78 4-11


22h6

Cautions for Safety

Option

22h6

24 27 9

35 40

1 1

4.5

12

Round Weight 3kg

LRT -S25 CAD Data HFM-15 HFM-15 LRT -S25W

Round Weight 6kg

LRT -S25 CAD Data HFM-22 HFM-22 LRT -S25W

B41

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 25W
Foot Mount Type Gearmotor with Brake
Fig.B-82
HLMN-15R -10240-S25 T L HLMN-15R -10240-S25W T
128 216 42.5
15h6
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-83

HLMN-22R -300900-S25 T L HLMN-22R -300900-S25W T


180

300

27 24

64

64

27 24
15h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 80

41.5 24.5 300

6 150

.5 114

12 45 4-11 90 116 45

105

24

70 106

Round Weight 3kg

HLMN-15 LRT -S25 CAD Data HLMN-15 LRT -S25W


L

Round Weight 6kg

HLMN-22 LRT -S25 CAD Data HLMN-22 LRT -S25W

Fig.B-84

HLMN-28R -12001800-S25 T L HLMN-28R -12001800-S25W T


200 375.5 62.5
28h6

45 40

100

100 45 40
28h6

300

49 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 9kg

LRT -S25 CAD Data HLMN-28 HLMN-28 LRT -S25W

Flange Mount Type Gearmotor with Brake


Fig.B-85
HFMN-15R -10240-S25 T L HFMN-15R -10240-S25W T
128 40 64 27 24
15h6
L

Fig.B-86

HFMN-22R -300900-S25 T L HFMN-22R -300900-S25W T


180 58 90 40 35
22h6

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

102

24 27 9

144

35 40

1 1

4.5

12

Round Weight 3kg

LRT -S25 CAD Data HFMN-15 HFMN-15 LRT -S25W

Round Weight 6kg Option P.E110

LRT -S25 CAD Data HFMN-22 HFMN-22 LRT -S25W

B42

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B43

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 40W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15 18
Standard Voltage (Continuous Rated 4 Poles)

0.67/0.80 0.61/0.66 0.67/0.80 0.61/0.66 0.61/0.66 0.34/0.33 0.29/0.34 0.34/0.33 0.29/0.34 0.29/0.34

1400/1650 1350/1650 1400/1650 1350/1650 1350/1650 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600

12 10 12 10 10 2.5 2.5 2.5 2.5 2.5 E


Totally Enclosed or Totally Enclosed Fan-cooled

S40

50/60

22 28 32 15 18

40W
Double Voltage (Continuous Rated 4 Poles)

S40W

50/60

22 28 32

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 118 137 176 225 274

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140 180 180 180 280 280 280 520 520 520

HLM

HFM

HLMN

HFMN

P.B45 Fig.B-87 3kg

P.B46 Fig.B-92 3kg

P.B47 Fig.B-95 3kg

P.B48 Fig.B-100 3kg

1/ 100 1/ 120 1-phase 40W 18 1/ 160 1/ 200 1/ 240 1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.B45 Fig.B-88 4kg P.B45 Fig.B-89 6kg P.B45 Fig.B-90 9kg P.B45 Fig.B-91 15kg

P.B46 Fig.B-93 4kg P.B46 Fig.B-94 6kg

P.B47 Fig.B-96 4kg P.B47 Fig.B-97 6kg P.B47 Fig.B-98 9kg P.B47 Fig.B-99 15kg

P.B48 Fig.B-101 4kg P.B48 Fig.B-102 6kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.

B44

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 40W
Foot Mount Type Gearmotor
Fig.B-87
HLM-15 R -10120-S40 T L HLM-15 R -10120-S40W T
128 216 42.5
15h6
L

Foot Mount type

Fig.B-88

HLM-18 R -160240-S40 T L HLM-18 R -160240-S40W T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

300

27 24

64

64

27 24
15h6

148 300 194 50.5


18h6

30 27

74

74

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

80

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 90

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

24

Round Weight 3kg

HLM-15 LRT -S40 CAD Data HLM-15 LRT -S40W


L R T L R T

Round Weight 4kg

HLM-18 LRT -S40 CAD Data HLM-18 LRT -S40W


L R T L R T

Gearmotor with Brake

Fig.B-89

HLM-22 -300450-S40 HLM-22 -300450-S40W


180 342.5 40 35
22h6

Fig.B-90
90

HLM-28 -600900-S40 HLM-28 -600900-S40W


200

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

90

300

53

40 35
22h6

339 300

62.5
28h6

45 40

100

100 45 40
28h6

41.5 80 24.5

6 150

.5 114

49 12 105 90 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

70 106

45 4-11

90 116

45

80 125

Round Weight 6kg


L

HLM-22 LRT -S40 CAD Data HLM-22 LRT -S40W

Round Weight 9kg

HLM-28 LRT -S40 CAD Data HLM-28 LRT -S40W

Speed Control Gearmotor with Brake Technical Information

Fig.B-91

HLM-32 R -12001800-S40 T L HLM-32 R -12001800-S40W T


240 358 76 10 58
32h6

Standard Motors

120 55 50

120

55 50
32h6

Cautions for Safety

300

Option

90

205 35 60 4-13

1 27
18 120 150 60 140

95 152

Round Weight 15kg

LRT -S40 CAD Data HLM-32 HLM-32 LRT -S40W

B45

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 40W
Flange Mount Type Gearmotor
Fig.B-92
HFM-15 R -10120-S40 T L HFM-15 R -10120-S40W T
L L

Flange Mount type Up to Frame 22

Fig.B-93
128

HFM-18 R -160240-S40 T L HFM-18 R -160240-S40W T

24 216 300 42.5 30 80 22.3 17 32 85 32 5 102 56 4-6.5


15h6

40

64

26 27 24
15h6

148 48 74 30 27
18h6

194 300

50.5 35
18h6

24 27 9

90

25.7 20.5 40

118 65 4-8.5

27 30 10

40 101

Round Weight 3kg


L

LRT -S40 CAD Data HFM-15 HFM-15 LRT -S40W

Round Weight 4kg

LRT -S40 CAD Data HFM-18 HFM-18 LRT -S40W

Fig.B-94

HFM-22 R -300450-S40 T L HFM-22 R -300450-S40W T

32 346.5 57 300 42 80 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

144

35 40

1 1

4.5

12

Round Weight 6kg

LRT -S40 CAD Data HFM-22 HFM-22 LRT -S40W

B46

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.B-95
HLMN-15 R -10120-S40 T L HLMN-15 R -10120-S40W T
L L

Foot Mount type

Fig.B-96

HLMN-18 R -160240-S40 T L HLMN-18 R -160240-S40W T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

128 216 42.5


15h6

300

27 24

64

64

27 24
15h6

148 300 230.5 50.5


18h6

30 27

74

74

Waterresistant Gearmotor with Brake

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

80

22.3 17 300 68 85

5 98 8 24 4-6.5 80 94 65 94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

24

Round Weight 3kg

LRT -S40 CAD Data HLMN-15 HLMN-15 LRT -S40W


L R T L R T

Round Weight 4kg

LRT -S40 CAD Data HLMN-18 HLMN-18 LRT -S40W


L R T L R T

Fig.B-97

HLMN-22 -300450-S40 HLMN-22 -300450-S40W

Fig.B-98

HLMN-28 -600900-S40 HLMN-28 -600900-S40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

180 342.5 300 53


22h6

200 90 40 35
22h6

40 35

90

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

Gearmotor with Brake

41.5 80 24.5 300

6 150

.5 114

49 12 105 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

70 106

45 4-11

90 116

45

80 125

Round Weight 6kg

LRT -S40 CAD Data HLMN-22 HLMN-22 LRT -S40W


L

Round Weight 9kg

LRT -S40 CAD Data HLMN-28 HLMN-28 LRT -S40W

Speed Control Gearmotor with Brake Technical Information

Fig.B-99

HLMN-32 R -12001800-S40 T L HLMN-32 R -12001800-S40W T

Standard Motors

240 394.5 300 10 58 94 35 300 60 4-13 205 76


32h6

120 55 50

120

55 50
32h6

Cautions for Safety

Option

1 27
18 120 150 60 140

95 152

Round Weight 15kg CAD Data HLMN-32 LRT -S40W

HLMN-32 LRT -S40

B47

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 40W
Flange Mount Type Gearmotor with Brake
Fig.B-100
HFMN-15R -10120-S40 T L HFMN-15R -10120-S40W T
L L

Flange Mount type Up to Frame 22

Fig.B-101

HFMN-18R -160240-S40 T L HFMN-18R -160240-S40W T

24 216 300 42.5 30 80 22.3 17 300 32 85 32 5 56 4-6.5


15h6

128 40 64 27 24
15h6

26 230.5 300 50.5 35 94 25.7 20.5 300 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

102

24 27 9

27 30 10

Round Weight 3kg

HFMN-15 LRT -S40 CAD Data HFMN-15 LRT -S40W


L

Round Weight 4kg

HFMN-18 LRT -S40 CAD Data HFMN-18 LRT -S40W

Fig.B-102

HFMN-22R -300450-S40 T L HFMN-22R -300450-S40W T

32 346.5 57 300 42 80 300 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

144

35 40

1 1

4.5

12

Round Weight 6kg

HFMN-22 LRT -S40 CAD Data HFMN-22 LRT -S40W

B48

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B49

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 60W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

18
Standard Voltage (Continuous Rated 4 Poles)

0.90/1.00 0.90/1.10 0.90/1.00 0.90/1.00 0.45/0.48 0.43/0.50 0.45/0.48 0.45/0.48

1350/1600 1300/1500 1350/1600 1350/1600 1350/1600 1300/1500 1350/1600 1350/1600

15 15 15 15 3.5 3.5 3.5 3.5 E


Totally Enclosed or Totally Enclosed Fan-cooled

S60 60W

100/100

50/60

22 28 32 18 22 28 32

Double Voltage (Continuous Rated 4 Poles)

S60W

200/200

50/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 18 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 176 216 284 353 421

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370 1760 1760 1760 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140 180 180 180 280 280 280 520 520 520

HLM

HFM

HLMN

HFMN

P.B51 P.B51 P.B52 P.B52 Fig.B-103 Fig.B-107 Fig.B-109 Fig.B-113 4kg 4kg 4kg 4kg

1/ 100 1/ 120 1-phase 60W 1/ 160 1/ 200


1/ 240

1/ 300 22 1/ 375 1/ 450 1/ 600 28 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

P.B51 P.B51 P.B52 P.B52 Fig.B-104 Fig.B-108 Fig.B-110 Fig.B-114 6kg 6kg 6kg 6kg P.B51 Fig.B-105 9kg P.B51 Fig.B-106 15kg P.B52 Fig.B-111 9kg P.B52 Fig.B-112 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.

B50

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 60W
Foot Mount Type Gearmotor
Fig.B-103
HLM-18 R -10240-S60 T L HLM-18 R -10240-S60W T
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-104

HLM-22 R -300450-S60 T L HLM-22 R -300450-S60W T


180

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

94

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75 80

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105

70 106

Round Weight 4kg


L

LRT -S60 CAD Data HLM-18 HLM-18 LRT -S60W

Round Weight 6kg


L

LRT -S60 CAD Data HLM-22 HLM-22 LRT -S60W

Fig.B-105

HLM-28 R -600900-S60 T L HLM-28 R -600900-S60W T


200 375.5 62.5
28h6

Fig.B-106
100 45 40
28h6

HLM-32 R -12001800-S60 T L HLM-32 R -12001800-S60W T


240 394.5 76 10 58
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

45 40

100

120 55 50

120

55 50
32h6

300

300

49 94 31

8 174.5

1 27
15 50 4-11 100 126 50 120

94

205 35 60 4-13

1 27
18 120 150 60 140

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

80 125

95 152

Round Weight 9kg

LRT -S60 CAD Data HLM-28 HLM-28 LRT -S60W

Round Weight 15kg

LRT -S60 CAD Data HLM-32 HLM-32 LRT -S60W

Flange Mount Type Gearmotor


Fig.B-107
HFM-18 R -10240-S60 T L HFM-18 R -10240-S60W T
148 48 74 30 27
18h6
L

Fig.B-108

HFM-22 R -300450-S60 T L HFM-22 R -300450-S60W T


32 346.5 57 180 58 90 40 35
22h6

Technical Information

Standard Motors

26 230.5 300 50.5 35 94 25.7 20.5 40 40 101 6 118 65 4-8.5


18h6

Cautions for Safety

300 42 80 41.5 24.5 45 114 45 6 78

Option

22h6

27 30 10

144

35 40

1 1

4.5

4-11

12

Round Weight 4kg

LRT -S60 CAD Data HFM-18 HFM-18 LRT -S60W

Round Weight 6kg

LRT -S60 CAD Data HFM-22 HFM-22 LRT -S60W

B51

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 60W
Foot Mount Type Gearmotor with Brake
Fig.B-109
HLMN-18R -10240-S60 T L HLMN-18R -10240-S60W T
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-110

HLMN-22R -300450-S60 T L HLMN-22R -300450-S60W T


180

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

342.5 300 53
22h6

40 35

90

90

40 35
22h6

94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

41.5 80 24.5 300

6 150

.5 114

12 45 4-11 90 116 45

105

70 106

Round Weight 4kg

HLMN-18 LRT -S60 CAD Data HLMN-18 LRT -S60W


L

Round Weight 6kg

HLMN-22 LRT -S60 CAD Data HLMN-22 LRT -S60W


L

Fig.B-111

HLMN-28 R -600900-S60 T L HLMN-28 R -600900-S60W T


200 375.5 62.5
28h6

Fig.B-112

HLMN-32R -12001800-S60 T L HLMN-32R -12001800-S60W T


240

45 40

100

100 45 40
28h6

394.5 300

76 10
32h6

120 55 50

120

55 50
32h6

300

49 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

58 94 35 300

205

1 27
18 60 4-13 120 150 60 140

80 125

95 152

Round Weight 9kg

HLMN-28 LRT -S60 CAD Data HLMN-28 LRT -S60W

Round Weight 15kg CAD Data HLMN-32 LRT -S60W

HLMN-32 LRT -S60

Flange Mount Type Gearmotor with Brake


Fig.B-113
HFMN-18R -10240-S60 T L HFMN-18R -10240-S60W T
L

Fig.B-114

HFMN-22 R -300450-S60 T L HFMN-22 R -300450-S60W T

26 230.5 300 50.5 35 94 25.7 20.5 300 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

32 346.5 57 300 42 80 41.5 24.5 45 114 45 6 78 4-11


22h6

180 58 90 40 35
22h6

27 30 10

144

35 40

1 1

4.5

12

Round Weight 4kg

LRT -S60 CAD Data HFMN-18 HFMN-18 LRT -S60W

Round Weight 6kg Option P.E110

LRT -S60 CAD Data HFMN-22 HFMN-22 LRT -S60W

B52

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B53

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 90W


Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

18
Standard Voltage (Continuous Rated 4 Poles)

1.30/1.40 1.30/1.40 1.30/1.40 1.20/1.40 0.65/0.66 0.65/0.66 0.65/0.66 0.59/0.65

1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1400/1650

20 20 20 20 5 5 5 5 E
Totally Enclosed or Totally Enclosed Fan-cooled

S90 90W

100/100

50/60

28 32 40 18 28 32 40

Double Voltage (Continuous Rated 4 Poles)

S90W

200/200

50/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 18 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

HLM

HFM

HLMN

HFMN

P.B55 P.B55 P.B56 P.B56 Fig.B-115 Fig.B-119 Fig.B-120 Fig.B-124 4kg 4kg 4kg 4kg

1/ 100 1/ 120 1-phase 90W


1/ 160 1/ 200 1/ 240

1/ 300 28 1/ 375 1/ 450 1/ 600 32 1/ 750 1/ 900 1/1200 40 1/1500 1/1800

P.B55 Fig.B-116 9kg P.B55 Fig.B-117 15kg P.B55 Fig.B-118 22kg

P.B56 Fig.B-121 9kg P.B56 Fig.B-122 15kg P.B56 Fig.B-123 22kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.

B54

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Gearmotor
H-Type Right Angel Shaft1-Phase 90W
Foot Mount Type Gearmotor
Fig.M-115
HLM-18 R -10240-S90 T L HLM-18 R -10240-S90W T
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.M-116

HLM-28 R -300450-S90 T L HLM-28 R -300450-S90W T


200

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

94

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

49 94 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg


L

HLM-18 LRT -S90 CAD Data HLM-18 LRT -S90W

Round Weight 9kg


L

HLM-28 LRT -S90 CAD Data HLM-28 LRT -S90W

Gearmotor with Brake

Fig.M-117

HLM-32 R -600900-S90 T L HLM-32 R -600900-S90W T


240 394.5 76 10 58
32h6

Fig.M-118

HLM-40 R -12001800-S90 T L HLM-40 R -12001800-S90W T


280

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

120 55 50

120

55 50
32h6

437 300

90 12
40h6

140 65 60

140

65 60
40h6

300

94

205 35 60 4-13

1 27
18 120 150 60 140

68.5 110 43

242.5

1 42
20 70 4-15 140 180 70 165

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

95 152

120 180

Round Weight 15kg

LRT -S90 CAD Data HLM-32 HLM-32 LRT -S90W

Round Weight 22kg

LRT -S90 CAD Data HLM-40 HLM-40 LRT -S90W

Flange Mount Type Gearmotor


Fig.M-119
HFM-18 R -10240-S90 T L HFM-18 R -10240-S90W T
L

Standard Motors

26 230.5 300 50.5 35 94 25.7 20.5 40 40 101 6 118 65 4-8.5


18h6

148 48 74 30 27
18h6

Cautions for Safety

Option

27 30 10

Round Weight 4kg

LRT -S90 CAD Data HFM-18 HFM-18 LRT -S90W

B55

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Gearmotor with Brake


H-Type Right Angel Shaft1-Phase 90W
Foot Mount Type Gearmotor with Brake
Fig.B-120
HLMN-18 R -10240-S90 T L HLMN-18 R -10240-S90W T
L

Foot Mount type

Flange Mount type Up to Frame 22

Fig.B-121

HLMN-28R -300450-S90 T L HLMN-28R -300450-S90W T


200

148 300 230.5 50.5


18h6

30 27

74

74

30 27
18h6

375.5 300

62.5
28h6

45 40

100

100 45 40
28h6

94

25.7 20.5 300 76 101

113 9 26 4-8.5 96 116 26 75

49 94 300 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg

LRT -S90 CAD Data HLMN-18 HLMN-18 LRT -S90W


L

Round Weight 9kg

LRT -S90 CAD Data HLMN-28 HLMN-28 LRT -S90W


L

Fig.B-122

HLMN-32R -600900-S90 T L HLMN-32R -600900-S90W T


240 394.5 76 10 58
32h6

Fig.B-123

HLMN-40 R -12001800-S90 T L HLMN-40 R -12001800-S90W T


280

120 55 50

120

55 50
32h6

437 300

90 12
40h6

140 65 60

140

65 60
40h6

300

94

205 35 60 4-13

1 27
18 120 150 60 140

68.5 110 43 300

242.5

1 42
20 70 4-15 140 180 70 165

95 152

120 180

Round Weight 15kg CAD Data HLMN-32 LRT -S90W

HLMN-32 LRT -S90

Round Weight 22kg CAD Data HLMN-40 LRT -S90W

HLMN-40 LRT -S90

Flange Mount Type Gearmotor with Brake


Fig.B-124
HFMN-18 R -10240-S90 T L HFMN-18 R -10240-S90W T
148 48 74 30 27
18h6
L

26 230.5 300 50.5 35 94 25.7 20.5 300 40 40 101 6 118 65 4-8.5


18h6

27 30 10

Round Weight 4kg

LRT -S90 CAD Data HFMN-18 HFMN-18 LRT -S90W

B56

Model Code P.B6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B57

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

B58

Right Angle Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Model and Type Designation Standard Model Lineup

Type
Right Angle Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start 4 Continuous Rating

1-Phase
15W40W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Totally Enclosed non-ventilated

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) SUS420J2 Aluminium die-cast 1040 100% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

B59

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Shaft Reduction Ratio Motor Capacity Auxiliary Mark

H-TypeRight Angle Shaft IP-65 Water-Resistant

H-Type Water-resistant(IP65) Gearmotor/Brake Motor are classified by codes as shown below. Specify these codes in your inquiry and order.
Spec. Designation

H H

L F

W V

15 18

L T

H L F W V

30 50

: Foot Mount

T25 S40

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft

: H-Type Right Angle Shaft : Flange Mount With Water-resistant IP65 Motor Output Shaft material:SUS420J2 : With Water-resistant IP65 Brake Motor Output Shaft material:SUS420J2

Output Shaft Diameter


L: Output shaft on the left viewing from input shaft side.
gearhead

Shaft Arrangement

Motor

R: Output shaft on the right viewing from input shaft side.

T: Output shaft on both side viewing from input shaft side.

Reduction Ratio

10 : 110 240 : 1240 T15 T25 T40 T60 T90 S15 S25 S40 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 3-phase 15W : 3-phase 25W : 3-phase 40W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz

Motor Designation and Capacity or Standard Volatage/ Frequency

Standard Volatage/Frequency

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position Indicator for cab tyre cable Refer to the indication mark list in P. E54 for details.

B60

Model and Type Designation

Standard Model Lineup


Foot Mount type Flange Mount type

Type

4P Motor Capacity

Frame Number

Output Shaft Arrangement

Reduction Ratio
1/10 1/15 1/50 1/20 1/60 1/25 1/30

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

3-Phase 15W 15 1-Phase 15W

L R T

1/40 1/80

1/100 1/120

1/160 1/200 1/240 1/10 3-Phase 25W 15 1-Phase 25W


L R T

1/15 1/50

1/20 1/60

1/25

1/30

1/40 1/80

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120

1/160 1/200 1/240 Gearmotor HLWHFW Gearmotor with Brake HLVHFV 3-Phase 40W 18 15
L R T L R T

1/10 1/40 1/80

1/15 1/50

1/20 1/60

1/25

1/30

1/100 1/120

1/160 1/200 1/240 1/10 1/15 1/50 1/20 1/60 1/25 1/30

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 40W

18

L R T

1/40 1/80

1/100 1/120

1/160 1/200 1/240 1/10 3-Phase 60W 18


L R T

1/15 1/50

1/20 1/60

1/25

1/30

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

1/40 1/80

1/100 1/120

1/160 1/200 1/240 3-Phase 90W 18


L R T

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

1/100 1/120 1/160 1/200 1/240

Note 1) Single-phase of 60W 90W is not available. 2) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Standard Motors

Cautions for Safety

Option

B61

B62

Right Angle Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

Type
Right Angle Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E44, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)

L-shaft

R-shaft

T-shaft

B63

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

15W

T15

200/200/220

50/60/60

15

0.14/0.13/0.13

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 15W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

HLW

HFW

HLV

HFV

P.B65 P.B65 P.B65 P.B65 Fig.B-125 Fig.B-126 Fig.B-127 Fig.B-128 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.

B64

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft3-Phase 15W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-125
Cab tyre cable 7.6 2000mm 192 149.5 34 59 76 22.3 15h6 42.5 27 24 64 46

Flange Mount Type Gearmotor


Fig.B-126
HFW-15 R -10240-T15 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-15 R -10240-T15 T

128 64 27 24 15h6

7.6 2000mm

Cab tyre cable

128 192 149.5 42.5 24 64 40 46 30 56 102


15h6

64 27 24
15h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

34 59 76 22.3 17

17 5

98

65

8 80 94 24

24 27 9

9.5

68 85

24 4-6.5

9.5

64 85

4-6.5

Round Weight 3kg

CAD Data HLW-15 LRT -T15

Round Weight 3kg

CAD Data HFW-15 LRT -T15

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-127
7.7 2000mm

HLV-15 R -10240-T15 T

Fig.B-128
7.7 2000mm

HFV-15 R -10240-T15 T

Cab tyre cable

Cab tyre cable

22

214 171.5 34

128 42.5 27 24
15h6

64 46

64

27 24
15h6

22

214 171.5 34

128 42.5 24 64 40 46 30
15h6

64 27 24
15h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

59 61.5 76 22.3 17 5 98

59 61.5 76 22.3 17 5

102 56

65

8 80 94 24 64 85 4- 6.5

24 27 9

68 85

24 4- 6.5

Round Weight 3kg

CAD Data HLV-15 LRT -T15

Round Weight 3kg

CAD Data HFV-15 LRT -T15

Technical Information

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B65

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

25W

T25

200/200/220

50/60/60

15

0.21/0.19/0.19

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 25W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

HLW

HFW

HLV

HFV

P.B67 P.B67 P.B67 P.B67 Fig.B-129 Fig.B-130 Fig.B-131 Fig.B-132 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.

B66

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft3-Phase 25W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-129
7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-130
HFW-15 R -10240-T25 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-15 R -10240-T25 T

Cab tyre cable

128 192 149.5 42.5 27 24


15h6

Cab tyre cable 7.6 2000mm

128 192 149.5 42.5 24 64 40 46 30 56 102


15h6

64 46

64

64 27 24
15h6

34 59 76 22.3 17 5 98

27 24
15h6

34 59 76 22.3 17

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65

8 80 94 24 9.5 64 85 4-6.5

24 27 9

9.5

68 85

24 4-6.5

Round Weight 3kg

CAD Data HLW-15 LRT -T25

Round Weight 3kg

CAD Data HFW-15 LRT -T25

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-131
7.7 2000mm

HLV-15 R -10240-T25 T

Fig.B-132
128
7.7 2000mm

HFV-15 R-10240-T25 T

Cab tyre cable

Cab tyre cable

128 214 171.5 42.5 24 64 40 46 30 76 22.3 17 5 102 56


15h6

22

214 171.5 34

42.5

27 24
15h6

64 46

64

64 27 24
15h6

27 24
15h6

22

34

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

59 61.5 76 22.3 17 5 98

59 61.5

65

8 80 94 24 64 85 4- 6.5

24 27 9

68 85

24 4- 6.5

Round Weight 3kg

CAD Data HLV-15 LRT -T25

Round Weight 3kg

CAD Data HFV-15 LRT -T25

Technical Information

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B67

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

40W

T40

200/200/220

50/60/60

15 18

0.29/0.27/0.27 0.27/0.26/0.26

1350/1550/1600 1350/1550/1550

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 15 3-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 18 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

HLW

HFW

HLV

HFV

P.B69 P.B69 P.B70 P.B70 Fig.B-133 Fig.B-135 Fig.B-137 Fig.B-139 3kg 3kg 3kg 3kg

P.B69 P.B69 P.B70 P.B70 Fig.B-134 Fig.B-136 Fig.B-138 Fig.B-140 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.

B68

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR Mini Series

Water-Resistant Gearmotor
H-Type Right Angel Shaft3-Phase 40W
Foot Mount Type Gearmotor
Fig.B-133
7.6 2000mm
Foot Mount type Flange Mount type

HLW-15 -10120-T40

L R T

Fig.B-134
128
7.6 2000mm

HLW-18 -160240-T40

L R T

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Cab tyre cable

Cab tyre cable

148 50.5 30 27
18h6

192 149.5 34 59 76 22.3

42.5

27 24
15h6

64 46

64

27 24
15h6

34

208 157.5

74 46

74

30 27
18h6

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 25.7

17 5

98

6 20.5 113 9 75

65

8 80 94 24 7.5 76 101 26 4-8.5 96 116

9.5

68 85

24 4-6.5

26

Round Weight 3kg

CAD Data HLW-15 LRT -T40

Round Weight 4kg

CAD Data HLW-18 LRT -T40

Flange Mount Type Gearmotor


Fig.B-135
7.6 2000mm

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

HFW-15 R -10120-T40 T

Fig.B-136
128
7.6 2000mm

HFW-18R -160240-T40 T

Cab tyre cable

Cab tyre cable

148 208 157.5 50.5 74 26 48 46 6 35 118 65


18h6

192 149.5 34 59 76 22.3

42.5

64 24 40 46 30 56 102
15h6

64 27 24
15h6

74

34

30 27
18h6

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

5 17

65.5 90 25.7

24 27 9 7.5

20.5

27 30 10

9.5

64 85

4-6.5

80 101

4-8.5

Round Weight 3kg

CAD Data HFW-15 LRT -T40

Round Weight 4kg

CAD Data HFW-18 LRT -T40

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Standard Motors

Cautions for Safety

Option

B69

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Water-Resistant Gearmotor with Brake


H-Type Right Angel Shaft3-Phase 40W
Foot Mount Type Gearmotor with Brake
Fig.B-137
7.7 2000mm
Foot Mount type Flange Mount type

HLV-15 R -10120-T40 T

Fig.B-138
7.7 2000mm

HLV-18 R -160240-T40 T

Cab tyre cable

Cab tyre cable

22

214 171.5 34

128 42.5 27 24
15h6

64 46

64

27 24
15h6

23.5

231.5 181 34

148 50.5 30 27
18h6

74 46

74

30 27
18h6

59 61.5 76 22.3 17 5 98

65.5 77 90 25.7

6 20.5 113 9 76 101 26 4- 8.5 96 116 26 75

65

8 80 94 24

68 85

24 4- 6.5

Round Weight 3kg

CAD Data HLV-15 LRT -T40

Round Weight 4kg

CAD Data HLV-18 LRT -T40

Flange Mount Type Gearmotor with Brake


Fig.B-139
7.7 2000mm

HFV-15 R -10120-T40 T

Fig.B-140
7.7 2000mm

HFV-18 R -160240-T40 T

Cab tyre cable

Cab tyre cable

22

214 171.5 34

128 42.5 64 24 40 46 30
15h6

64 27 24
15h6

23.5 34

231.5 181

148 50.5 74 26 48 46 6 35 65 118


18h6

74 30 27
18h6

59 61.5 76 22.3 17 5

65.5 77 90 25.7

102 56

24 27 9

20.5

27 30 10

64 85

4- 6.5

80 101

4- 8.5

Round Weight 3kg

CAD Data HFV-15 LRT -T40

Round Weight 4kg

CAD Data HFV-18 LRT -T40

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

B70

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B71

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

60W

T60

200/200/220

50/60/60

18

0.40/0.36/0.36

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 60W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

HLW

HFW

HLV

HFV

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.B73 P.B73 P.B73 P.B73 Fig.B-141 Fig.B-142 Fig.B-143 Fig.B-144 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.

B72

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft3-Phase 60W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-141
7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-142
HFW-18 R -10240-T60 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-18R -10240-T60 T

Cab tyre cable

148 50.5 30 27
18h6

7.6 2000mm

Cab tyre cable

148 208 50.5 74 26 48 46 6 35 65


18h6

34

208 157.5

74 46

74

74

30 27
18h6

157.5 34

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 25.7

6 20.5 113 9 75

65.5 90 25.7

20.5

118

27 30 10

7.5

76 101

26 4-8.5

96 116

26

7.5

80 101

4-8.5

Round Weight 4kg

HLW-18 LRT -T60 CAD Data HLW-18 LRT -T90

Round Weight 4kg

HLW-18 LRT -T60 CAD Data HLW-18 LRT -T90

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-143
7.7 2000mm

HLV-18 R -10240-T60 T

Fig.B-144
7.7 2000mm

HFV-18 R -10240-T60 T

Cab tyre cable

Cab tyre cable

23.5

231.5 181 34

148 50.5 30 27
18h6

74 46

74

30 27
18h6

23.5 34

231.5 181

148 50.5 26 74 48 46 6 35 65 118


18h6

74 30 27
18h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

65.5 77 90 25.7

6 20.5 113 9 76 101 26 4- 8.5 96 116 26 75

65.5 77 90 25.7

20.5

27 30 10

80 101

4- 8.5

Round Weight 4kg

LRT -T60 CAD Data HLV-18 HLV-18 LRT -T90

Round Weight 4kg

LRT -T60 CAD Data HFV-18 HFV-18 LRT -T90

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B73

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft3-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

90W

T90

200/200/220

50/60/60

18

0.51/0.48/0.48

1350/1550/1550

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 90W 18 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

HLW

HFW

HLV

HFV

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.B75 P.B75 P.B75 P.B75 Fig.B-145 Fig.B-146 Fig.B-147 Fig.B-148 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.

B74

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft3-Phase 90W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-145
7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-146
HFW-18 R -10240-T90 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-18R -10240-T90 T

Cab tyre cable

148 50.5 30 27
18h6

7.6 2000mm

Cab tyre cable

148 208 50.5 26 74 48 46 6 35 65


18h6

34

208 157.5

74 46

74

74

30 27
18h6

157.5 34

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 25.7

6 20.5 113 9 75

65.5 90 25.7

20.5

118

27 30 10

7.5

76 101

26 4-8.5

96 116

26

7.5

80 101

4-8.5

Round Weight 4kg

HLW-18 LRT -T60 CAD Data HLW-18 LRT -T90

Round Weight 4kg

HLW-18 LRT -T60 CAD Data HLW-18 LRT -T90

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-147
7.7 2000mm

HLV-18 R -10240-T90 T

Fig.B-148
7.7 2000mm

HFV-18 R -10240-T90 T

Cab tyre cable

Cab tyre cable

23.5

231.5 181 34

148 50.5 30 27
18h6

74 46

74

30 27
18h6

23.5 34

231.5 181

148 50.5 26 74 48 46 6 35 65 118


18h6

74 30 27
18h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

65.5 77 90 25.7

6 20.5 113 9 76 101 26 4- 8.5 96 116 26 75

65.5 77 90 25.7

20.5

27 30 10

80 101

4- 8.5

Round Weight 4kg

LRT -T60 CAD Data HLV-18 HLV-18 LRT -T90

Round Weight 4kg

LRT -T60 CAD Data HFV-18 HFV-18 LRT -T90

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B75

B76

Right Angle Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

Type
Right Angle Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E44, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)

L-shaft

R-shaft

T-shaft

B77

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15W

S15

100/100

50/60

15

0.39/0.35

1350/1650

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

HLW

HFW

HLV

HFV

P.B79 P.B79 P.B79 P.B79 Fig.B-149 Fig.B-150 Fig.B-151 Fig.B-152 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.

B78

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft1-Phase 15W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-149
Cab tyre cable 7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-150
HFW-15R -10240-S15 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-15R -10240-S15 T

128 192 149.5 42.5 27 24


15h6

Cab tyre cable 7.6 2000mm

128 192 149.5 42.5 64 24 40 46 30 56 102


15h6

64 46

64

64 27 24
15h6

34 59 76 22.3 17 5 98 65

27 24
15h6

34 59 76 22.3 17

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

8 80 94 24 9.5 64 85 4-6.5

24 27 9

9.5

68 85

24 4-6.5

Round Weight 3kg

CAD Data HLW-15 LRT -S15

Round Weight 3kg

CAD Data HFW-15 LRT -S15

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-151
7.7 2000mm

HLV-15 R -10240-S15 T

Fig.B-152
7.7 2000mm

HFV-15 R -10240-S15 T

Cab tyre cable

Cab tyre cable

22

214 171.5 34

128 42.5 27 24
15h6

64 46

64

27 24
15h6

22

214 171.5 34

128 42.5 24 64 40 46 30
15h6

64 27 24
15h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

59 61.5 76 22.3 17 5 98

59 61.5 76 22.3 17 5

102 56

65

8 80 94 24 64 85 4- 6.5

24 27 9

68 85

24 4- 6.5

Round Weight 3kg

CAD Data HLV-15 LRT -S15

Round Weight 3kg

CAD Data HFV-15 LRT -S15

Technical Information

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B79

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

25W

S25

100/100

50/60/60

15

0.48/0.48

1350/1600

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

HLW

HFW

HLV

HFV

P.B81 P.B81 P.B81 P.B81 Fig.B-153 Fig.B-154 Fig.B-155 Fig.B-156 3kg 3kg 3kg 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.

B80

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft1-Phase 25W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-153
7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-154
HFW-15R -10240-S25 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-15R -10240-S25 T

Cab tyre cable

128 192 149.5 42.5 27 24


15h6

7.6 2000mm

Cab tyre cable

128 192 149.5 42.5 64 24 40 46 30 56 102


15h6

64 46

64

64 27 24
15h6

34 59 76 22.3 17 5 98 65

27 24
15h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

34 59 76 22.3 17

8 80 94 24 9.5 64 85 4-6.5

24 27 9

9.5

68 85

24 4-6.5

Round Weight 3kg

CAD Data HLW-15 LRT -S25

Round Weight 3kg

CAD Data HFW-15 LRT -S25

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-155
7.7 2000mm

HLV-15 R -10240-S25 T

Fig.B-156
7.7 2000mm

HFV-15 R -10240-S25 T

Cab tyre cable

Cab tyre cable

22

214 171.5 34

128 42.5 27 24
15h6

64 46

64

27 24
15h6

22

214 171.5 34

128 42.5 64 24 40 46 30
15h6

64 27 24
15h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

59 61.5 76 22.3 17 5 98

59 61.5 76 22.3 17 5

102 56

65

8 80 94 24 64 85 4- 6.5

24 27 9

68 85

24 4- 6.5

Round Weight 3kg

CAD Data HLV-15 LRT -S25

Round Weight 3kg

CAD Data HFV-15 LRT -S25

Technical Information

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B81

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

H-Type Right Angel Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

40W

S40

100/100

50/60/60

18

0.61/0.66

1350/1650

10

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 40W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

HLW

HFW

HLV

HFV

P.B83 P.B83 P.B83 P.B83 Fig.B-157 Fig.B-158 Fig.B-159 Fig.B-160 4kg 4kg 4kg 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.

B82

Model Code P.B60

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

H-Type Right Angel Shaft1-Phase 40W


Foot Mount type Flange Mount type

Foot Mount Type Gearmotor


Fig.B-157
7.6 2000mm

Flange Mount Type Gearmotor


Fig.B-158
HFW-18R -10240-S40 T
L

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

HLW-18R -10240-S40 T

Cab tyre cable

148 50.5 30 27
18h6

7.6 2000mm

Cab tyre cable

148 208 50.5 26 74 48 46 6 35 118 65


18h6

34

208 157.5

74 46

74

74

30 27
18h6

157.5 34 65.5 90 25.7

30 27
18h6

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

65.5 90 25.7

6 20.5 113 9 75

20.5

27 30 10

7.5

76 101

26 48.5

96 116

26

7.5

80 101

4-8.5

Round Weight 4kg

CAD Data HLW-18 LRT -S40

Round Weight 4kg

CAD Data HFW-18 LRT -S40

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Fig.B-159
7.7 2000mm

HLV-18 R -10240-S40 T

Fig.B-160
7.7 2000mm

HFV-18 R -10240-S40 T

Cab tyre cable

Cab tyre cable

23.5

231.5 181 34

148 50.5 30 27
18h6

74 46

74

30 27
18h6

23.5 34

231.5 181

148 50.5 74 26 48 46 6 35 65 118


18h6

74 30 27
18h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

65.5 77 90 25.7

6 20.5 113 9 76 101 26 4- 8.5 96 116 26 75

65.5 77 90 25.7

20.5

27 30 10

80 101

4- 8.5

Round Weight 4kg

CAD Data HLV-18 LRT -S40

Round Weight 4kg

CAD Data HFV-18 LRT -S40

Technical Information

Standard Motors

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Cautions for Safety

Option

B83

B84

Right Angle Shaft

Gearmotor

Speed Control Gearmotor


Model and Type Designation Standard Model Lineup

Type
Right Angle Shaft

Number of phase Capacity Power Source Motor Part Insulation Classification Starting Method Protective cooling Method Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft Output Shaft Material Case Material Ambient Temperature Ambient Humidity Ambient Conditions Altitude Environment Installation Location Painting Painting Method Painting Color Mounting Direction

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start Totally Enclosed (6090W models are forced fan attached.) 4 Continuous Rating Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

B85

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Shaft Reduction Ratio Motor Capacity

H-TypeRight Angle Shaft

H-Type Speed Control Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

H H

L F

U P

15 22

L T

H L F U P

30 450

: Foot Mount

T25 S40 W C

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft

: H-Type Right Angle Shaft : Flange Mount Up to Frame 22 : With Speed Control Gearmotor U-Type With Controller : With Speed Control Gearmotor P-Type Controller Sells Separately

Output Shaft Diameter


L: Output shaft on the left viewing from input shaft side.
gearhead

Shaft Arrangement

Motor

Output shaft on the right viewing from input shaft side.

Output shaft on both side viewing from input shaft side.

Reduction Ratio

10 : 110 1800 : 11800 S15 S25 : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W

Motor Designation and Capacity

S40 S60 S90

Blank : Standard Specifications 1-phase100V50Hz 100V60Hz Option W C Auxiliary Mark Spec. Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

: High Voltage 1-phase200V50Hz 200V60Hz : P-Type Terminal Box : Mark for Additional Specs.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

Controller
Type Designation
GTR Mini-Series controllers are classified by codes as shown below. These codes are required for your inquiry and/or order.
Type
Voltage Function Motor Type

SC P

10 1

Blank : U-Type L : P-Type Function


0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running

Voltage

10 single-phase 100V 20 single-phase 200V

B86

U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors) SC: Speed Controller (generic name)

Model and Type Designation

Standard Model Lineup


U-Type P-Type Controller Sells Separately

Type

4P Motor Capacity

Frame Number

Output Shaft Arrangement

Reduction Ratio
1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15 1-Phase 15W 22

L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

15

1/100 1/120 1/160 1/200 1/240

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 25W

22

1/300 1/375 1/450 1/600 1/750 1/900

28

1/1200 1/1500 1/1800

18 Speed Control Gearmotor HLUHFU Note 1 HLP HFP

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

1/100 1/120 1/160 1/200 1/240

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

1-Phase 40W

28

1/300 1/375 1/450 1/600 1/750 1/900

32

1/1200 1/1500 1/1800

Gearmotor with Brake

18

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

1/100 1/120 1/160 1/200 1/240

1-Phase 60W

28

1/300 1/375 1/450 1/600 1/750 1/900

32

1/1200 1/1500 1/1800

18

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

1/100 1/120 1/160 1/200 1/240

28 1-Phase 90W 32

1/300 1/375 1/450

Standard Motors

1/600 1/750 1/900

Cautions for Safety

Option

40

1/1200 1/1500 1/1800

Note 1) The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) 2) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

B87

B88

Right Angle Shaft

Gearmotor

Speed Control Gearmotor


Performance Table Dimension diagram

Type
Right Angle Shaft

1-Phase
Remarks The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N m{kgf m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E30, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)

L-shaft

R-shaft

T-shaft

B89

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 15W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

S15 15W S15W

100/100 200/200

50/60 50/60

15 22 15 22

0.6/0.6 0.6/0.6 0.3/0.3 0.3/0.3

5001350/5501650 5001350/5501650 6001400/7501700 6001400/7501700

6 6 1.5 1.5 E
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 1760 1760 1760

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 180 180 180

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 16.7 20.6 25.5 33.3 42.1 50.0 66.6 83.3 98.0

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.7 2.1 2.6 3.4 4.3 5.1 6.8 8.5 10

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

HLU HLP

HFU HFP

70 100V 60 200V P.B91 Fig.B-161 3kg P.B91 Fig.B-162 3kg

1/ 100 1-phase 15W 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 22 1/ 750 1/ 900 1/1200 1/1500 1/1800

70 100V 60 200V P.B91 Fig.B-163 6kg P.B91 Fig.B-164 6kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.

Torque-Rotation Speed Characteristic Graph


1-Phase 15W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

B90

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type
Lead wire with connector 300mm

P-Type
Motor lead wire 300mm Lead wire for generator 300mm (white white)

Foot Mount Type


Fig.B-161
HLU-15 HLU-15 HLP-15 HLP-15
L R T L R T L R T L R T

Foot Mount type

Flange Mount type Up to Frame 22

-10240-S15 -10240-S15W -10240-S15 -10240-S15W


128 27 24
15h6

Fig.B-162

HLU-22 HLU-22 HLP-22 HLP-22

L R T L R T L R T L R T

-3001800-S15 -3001800-S15W -3001800-S15 -3001800-S15W


180 40 35
22h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

64

64

189 300

42.5

27 24
15h6

90

90

315.5 300 53

40 35
22h6

Speed Control Gearmotor Gearmotor with Clutch /Brake

76 40

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76 40

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105
GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

24

70 106

Round Weight 3kg

CAD Data HLU-15 LRT -S15 HLU-15 LRT -S15W

HLP-15 LRT -S15 HLP-15 LRT -S15W

Round Weight 6kg

CAD Data HLU-22 LRT -S15 HLU-22 LRT -S15W

HLP-22 LRT -S15 HLP-22 LRT -S15W

Flange Mount Type


Fig.B-163
HFU-15 HFU-15 HFP-15 HFP-15
189 300
L R T L R T L R T L R T

With Waterresistant Brake Motor


L R T L R T L R T L R T

-10240-S15 -10240-S15W -10240-S15 -10240-S15W


24 128 40 64 27 24
15h6

Fig.B-164

HFU-22 HFU-22 HFP-22 HFP-22


319.5

-3001800-S15 -3001800-S15W -3001800-S15 -3001800-S15W


32 57 180 58 90 40 35
22h6

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

42.5 30
15h6

300 42 76 40 41.5 24.5 45 114 45 6 78

22h6

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

76 40

22.3 17 32 85 32

102 56 4-6.5

24 27 9

144

35 40

1 1

4.5

4-11

12

Round Weight 3kg

CAD Data HFU-15 LRT -S15 HFU-15 LRT -S15W

HFP-15 LRT -S15 HFP-15 LRT -S15W

Round Weight 6kg

CAD Data HFU-22 LRT -S15 HFU-22 LRT -S15W

HFP-22 LRT -S15 HFP-22 LRT -S15W

Speed Control Gearmotor with Brake Technical Information

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

Standard Motors

Cautions for Safety

Option

B91

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 25W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S25 25W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S25W

200/200

50/60

15 22 28 15 22 28

0.6/0.6 0.6/0.6 0.7/0.7 0.4/0.4 0.4/0.4 0.4/0.4

7501350/10001650 7501350/10001650 5501400/6501650 8501350/10001650 8501350/10001650 6001350/8001650

8 8 8 2 2 2

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 15 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080 1760 1760 1760 1760 1760 1760 2740 2740 2740

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110 180 180 180 180 180 180 280 280 280

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 28.4 35.3 42.1 55.9 69.6 84.3 108 137 167

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.9 3.6 4.3 5.7 7.1 8.6 11 14 17

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

HLU HLP

HFU HFP

50 100V 45 200V P.B93 Fig.B-165 3kg P.B94 Fig.B-168 3kg

1/ 100 1-phase 25W 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 22 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 28 1/1500 1/1800

50 100V 45 200V P.B93 Fig.B-166 6kg P.B94 Fig.B-169 6kg

60 100V 200V

P.B93 Fig.B-167 9kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.

Torque-Rotation Speed Characteristic Graph


1-Phase 25W
200

Note) 100% torque shows the allowable torque at high speed.

Frame No.15 22/100V


50Hz 60Hz 200

Frame No.15 22/200V


50Hz 60Hz 200

Frame No.28/100V
50Hz 60Hz 200

Frame No.28/200V
50Hz 60Hz

150

150

150

150

Torque

Torque

Torque

Torque

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

B92

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Foot Mount Type


Fig.B-165
HLU-15 HLU-15 HLP-15 HLP-15
L R T L R T L R T L R T

Foot Mount type

-10240-S25 -10240-S25W -10240-S25 -10240-S25W


128 64 64

Fig.B-166

HLU-22 HLU-22 HLP-22 HLP-22

L R T L R T L R T L R T

-300900-S25 -300900-S25W -300900-S25 -300900-S25W


180 90 90

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

189 300

42.5
15h6

27 24

27 24
15h6

315.5 300 53
22h6

40 35

40 35
22h6

Speed Control Gearmotor Gearmotor with Clutch /Brake

76 40

22.3 17 68 85

5 98 8 24 4-6.5 80 94 65 76 40

41.5 24.5

6 150

.5 114

12 45 4-11 90 116 45

105
GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

24

70 106

Round Weight 3kg

CAD Data HLU-15 LRT -S25 HLP-15 LRT -S25 HLU-15 LRT -S25W HLP-15 LRT -S25W
L R T L R T L R T L R T

CAD Data HLU-22 LRT -S25 Round Weight 6kg HLU-22 LRT -S25W

HLP-22 LRT -S25 HLP-22 LRT -S25W

Fig.B-167

HLU-28 HLU-28 HLP-28 HLP-28

-12001800-S25 -12001800-S25W -12001800-S25 -12001800-S25W


200 45 40
28h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

100

350 300

62.5

100 45 40
28h6

49 90 40 31

8 174.5

1 27
15 50 4-11 100 126 50 120

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

80 125

Round Weight 9kg

CAD Data HLU-28 LRT -S25 HLU-28 LRT -S25W

HLP-28 LRT -S25 HLP-28 LRT -S25W

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Standard Motors

Cautions for Safety

Option

B93

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 25W
Flange Mount Type
Fig.B-168
HFU-15 HFU-15 HFP-15 HFP-15
L R T L R T L R T L R T

Flange Mount type Up to Frame 22

-10240-S25 -10240-S25W -10240-S25 -10240-S25W


24 128 40 64 27 24
15h6

Fig.B-169

HFU-22 HFU-22 HFP-22 HFP-22

L R T L R T L R T L R T

-300900-S25 -300900-S25W -300900-S25 -300900-S25W


32 180 58 90 40 35
22h6

189 300

42.5 30
15h6

319.5 57 300 42 76 40 41.5 24.5 45 114 45 6 78 4-11


22h6

76 40

22.3 17 32 85 32

102 56 4-6.5

24 27 9

144

35 40

1 1

4.5

12

Round Weight 3kg

CAD Data HFU-15 LRT -S25 HFP-15 LRT -S25 HFU-15 LRT -S25W HFP-15 LRT -S25W

CAD Data HFU-22 LRT -S25 Round Weight 6kg HFU-22 LRT -S25W

HFP-22 LRT -S25 HFP-22 LRT -S25W

Shaft Arrangement Diagram (Flange Mount)


L-shaft R-shaft T-shaft

B94

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

B95

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 40W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S40 40W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S40W

200/200

50/60

18 28 32 18 28 32

0.9/0.9 0.9/0.9 0.9/0.9 0.5/0.5 0.5/0.5 0.5/0.5

8001350/10501650 8001350/10501650 8001350/10501650 9001350/13001650 9001350/13001650 9001350/13001650

12 12 12 3 3 3

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 18 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370 2740 2740 2740 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140 280 280 280 280 280 280 520 520 520

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2 45.1 55.9 67.6 90.2 118 137 176 225 274

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1 4.6 5.7 6.9 9.2 12 14 18 23 28

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

HLU HLP

HFU HFP

40 100V 200V

P.B97 Fig.B-170 4kg

P.B97 Fig.B-173 4kg

1/ 100 1-phase 40W 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 28 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

40 100V 200V

P.B97 Fig.B-171 9kg

40 100V 200V

P.B97 Fig.B-172 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.

Torque-Rotation Speed Characteristic Graph


1-Phase 40W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

B96

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type
Lead wire with connector 300mm

P-Type
Motor lead wire 300mm Lead wire for generator 300mm (white white)

Foot Mount Type


Fig.B-170
HLU-18 HLU-18 HLP-18 HLP-18
205
L R T L R T L R T L R T

Foot Mount type

Flange Mount type Up to Frame 22

-10240-S40 -10240-S40W -10240-S40 -10240-S40W


148 74 74

Fig.B-171

HLU-28 HLU-28 HLP-28 HLP-28


350

L R T L R T L R T L R T

-300900-S40 -300900-S40W -300900-S40 -300900-S40W


200 45 40
28h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

100

300

50.5
18h6

30 27

30 27
18h6

62.5

100 45 40
28h6

300

90 40

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

49 90 40 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg

CAD Data HLU-18 LRT -S40 HLP-18 LRT -S40 HLU-18 LRT -S40W HLP-18 LRT -S40W
L R T L R T L R T L R T

Round Weight 9kg

CAD Data HLU-28 LRT -S40 HLU-28 LRT -S40W

HLP-28 LRT -S40 HLP-28 LRT -S40W

Fig.B-172

HLU-32 HLU-32 HLP-32 HLP-32


369

-12001800-S40 -12001800-S40W -12001800-S40 -12001800-S40W


240 120 55 50
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

120

76 10

55 50
32h6

300 58 35

Gearmotor with Brake

90 40

205

1 27
18 60 4-13 120 150 60 140

With Waterresistant Brake Motor Speed Control Gearmotor

95 152

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

CAD Data HLP-32 LRT -S40 HLU-32 LRT -S40 LRT -S40W Round Weight 15kg HLU-32 LRT -S40W HLP-32

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange Mount Type


Fig.B-173
HFU-18 HFU-18 HFP-18 HFP-18
L R T L R T L R T L R T

-10240-S40 -10240-S40W -10240-S40 -10240-S40W


26 148 48 74 30 27
18h6

Standard Motors

Cautions for Safety

205 300

Shaft Arrangement Diagram (Flange Mount)


Option

50.5 35
18h6

L-shaft
25.7 20.5 40 40 101 118 65 4-8.5 27 30 10

R-shaft

T-shaft

90 40

Round Weight 4kg

CAD Data HFU-18 LRT -S40 HFU-18 LRT -S40W

HFP-18 LRT -S40 HFP-18 LRT -S40W

B97

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 60W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S60 60W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S60W

200/200

50/60

18 28 32 18 28 32

1.0/1.7 1.0/1.7 1.0/1.7 0.8/0.9 0.8/0.9 0.8/0.9

7001350/8001650 7001350/8001650 7001350/8001650 7001350/8001650 7001350/8001650 7001350/8001650

20 20 20 5 5 5

Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 1/ 1/ 1/ 1/ 1/ 18 1/ 1/ 1/ 10 15 20 25 30 40 50 60 80 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370 2740 2740 2740 2740 2740 2740 5100 5100 5100

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140 280 280 280 280 280 280 520 520 520

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9 70.6 88.2 108 137 176 216 284 353 421

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5 7.2 9.0 11 14 18 22 29 36 43

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

HLU HLP

HFU HFP

60 100V 55 200V P.B97 Fig.B-174 4kg P.B97 Fig.B-177 4kg

1/ 100 1-phase 60W 1/ 120 1/ 160 1/ 200


1/ 240

1/ 300 1/ 375 28 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 32 1/1500 1/1800

60 100V 55 200V 60 100V 55 200V P.B97 Fig.B-175 9kg

P.B97 Fig.B-176 15kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.

Torque-Rotation Speed Characteristic Graph


1-Phase 60W
200

Note) 100% torque shows the allowable torque at high speed.

100V
50Hz 60Hz

200V
50Hz 60Hz 200

150 Torque Torque

150

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

B98

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fancooled.

U-Type
Lead wire with connector 300mm

P-Type
Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

Foot Mount Type


Fig.B-174
HLU-18 HLU-18 HLP-18 HLP-18
238.5
L R T L R T L R T L R T

Foot Mount type

Flange Mount type Up to Frame 22

-10240-S60 -10240-S60W -10240-S60 -10240-S60W


148 74 74

Fig.B-175

HLU-28 HLU-28 HLP-28 HLP-28

L R T L R T L R T L R T

-300900-S60 -300900-S60W -300900-S60 -300900-S60W


200 45 40
28h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

100

300

50.5
18h6

30 27

30 27
18h6

4 300

383.5

62.5

100 45 40
28h6

92

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

92

49 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg

CAD Data HLU-18 LRT -S60 HLP-18 LRT -S60 HLU-18 LRT -S60W HLP-18 LRT -S60W
L R T L R T L R T L R T

Round Weight 9kg

CAD Data HLU-28 LRT -S60 HLU-28 LRT -S60W

HLP-28 LRT -S60 HLP-28 LRT -S60W

Fig.B-176

HLU-32 HLU-32 HLP-32 HLP-32

-12001800-S60 -12001800-S60W -12001800-S60 -12001800-S60W


240 120 55 50
32h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

120

4 300

402.5

76 10 58

55 50
32h6

Gearmotor with Brake

92

205 35 60 4-13

1 27
18 120 150 60 140

With Waterresistant Brake Motor Speed Control Gearmotor

95 152

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

CAD Data HLP-32 LRT -S60 HLU-32 LRT -S60 Round Weight 15kg HLU-32 LRT -S60W LRT -S60W HLP-32

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange Mount Type


Fig.B-177
HFU-18 HFU-18 HFP-18 HFP-18
L R T L R T L R T L R T

-10240-S60 -10240-S60W -10240-S60 -10240-S60W


26 148 48 74 30 27
18h6

Standard Motors

Cautions for Safety

Shaft Arrangement Diagram (Flange Mount)


Option

230.5 300

50.5 35
18h6

L-shaft

R-shaft

T-shaft

92

25.7 20.5 40

118 65 4-8.5

27 30 10

40 101

Round Weight 4kg

CAD Data HFU-18 LRT -S60 HFU-18 LRT -S60W

HFP-18 LRT -S60 HFP-18 LRT -S60W

B99

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


H-Type Right Angel Shaft1-Phase 90W
Motor Specs. Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

Standard Voltage (Continuous Rated 4 Poles)

S90 90W

100/100

50/60

Double Voltage (Continuous Rated 4 Poles)

S90W

200/200

50/60

18 28 32 40 18 28 32 40

1.4/2.0 1.4/2.0 1.4/2.0 1.4/2.0 0.9/1.0 0.9/1.0 0.9/1.0 1.0/1.1

9501300/11501600 9501300/11501600 9501300/11501600 9501350/11001650 10001350/11501600 10001350/11501600 10001350/11501600 9001350/11001650

26 26 26 26 6.5 6.5 6.5 6.5

Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

HLU HLP

HFU HFP

40 100V 200V

18

P.B101 Fig.B-178 4kg

P.B101 Fig.B-182 4kg

1-phase 90W

28

40 100V 200V 40 100V 200V 40 100V 200V

P.B101 Fig.B-179 6kg P.B101 Fig.B-180 9kg P.B101 Fig.B-181 22kg

32

40

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.

Torque-Rotation Speed Characteristic Graph


1-Phase 90W
Frame No.18 28 32/100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.18 28 32/200V


50Hz 60Hz 200

Frame No.40/100V
50Hz 60Hz

Frame No.40/200V
50Hz 60Hz 200

150

150

150

150

Torque

Torque

Torque

Torque

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

B100

Model Code P.B86

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fancooled.

U-Type
Lead wire with connector 300mm

P-Type
Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm black black

Foot Mount Type


Fig.B-178
HLU-18 HLU-18 HLP-18 HLP-18
238.5
L R T L R T L R T L R T

Foot Mount type

Flange Mount type Up to Frame 22

-10240-S90 -10240-S90W -10240-S90 -10240-S90W


148 74 74

Fig.B-179

HLU-28 HLU-28 HLP-28 HLP-28

L R T L R T L R T L R T

-300450-S90 -300450-S90W -300450-S90 -300450-S90W


200 45 40
28h6

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

100

300

50.5
18h6

30 27

30 27
18h6

4 300

383.5

62.5

100 45 40
28h6

92

25.7 20.5 76 101

113 9 26 4-8.5 96 116 26 75

92

49 31

8 174.5

1 27
15 50 4-11 100 126 50 120

80 125

Round Weight 4kg

CAD Data HLU-18 LRT -S90 HLU-18 LRT -S90W


L R T L R T L R T L R T

HLP-18 LRT -S90 HLP-18 LRT -S90W

Round Weight 6kg

CAD Data HLU-28 LRT -S90 HLU-28 LRT -S90W


L R T L R T L R T L R T

HLP-28 LRT -S90 HLP-28 LRT -S90W

Fig.B-180

HLU-32 HLU-32 HLP-32 HLP-32

-600900-S90 -600900-S90W -600900-S90 -600900-S90W


240 120 55 50
32h6

Fig.B-181

HLU-40 HLU-40 HLP-40 HLP -40

-12001800-S90 -12001800-S90W -12001800-S90 -12001800-S90W


280 140 65 60
40h6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

120

4 300

402.5

76 10 58

55 50
32h6

140

4 300

444.5

90 12

65 60
40h6

Gearmotor with Brake

92

205 35 60 4-13

1 27
18 120 150 60 140

68.5 108 43

242.5

1 42
20 70 4-15 140 180 70 165

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

95 152

120 180

Round Weight 9kg

CAD Data HLP-32 LRT -S90 HLU-32 LRT -S90 LRT -S90W HLU-32 LRT -S90W HLP-32

Round Weight 22kg

CAD Data HLU-40 LRT -S90 HLU-40 LRT -S90W

HLP-40 LRT -S90 HLP-40 LRT -S90W

Flange Mount Type


Fig.B-182
HFU-18 HFU-18 HFP-18 HFP-18
L R T L R T L R T L R T

-10240-S90 -10240-S90W -10240-S90 -10240-S90W


26 148 48 74 30 27
18h6

Shaft Arrangement Diagram (Foot Mount)


L-shaft R-shaft T-shaft

Standard Motors

Cautions for Safety

238.5 300

50.5 35
18h6

Option

Shaft Arrangement Diagram (Flange Mount)


118 27 30 10

92

25.7 20.5 40

65 4-8.5

L-shaft

R-shaft

T-shaft

40 101

Round Weight 4kg

CAD Data HFP-18 LRT -S90 HFU-18 LRT -S90 LRT -S90W HFU-18 LRT -S90W HFP-18

B101

Concentric Hollow Shaft/ Concentric Solid Shaft

Gearmotor

F2-Type Gearmotor
Model and Type Designation Standard Model Lineup

F2
Type
F2S Concentric Hollow Shaft F2F Concentric Solid Shaft

F2S (Concentric Hollow Shaft) Gearmotor/Brake Motor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram F2F (Contentric Solid Shaft) Gearmotor/Brake Moter Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram F2S (Concentric Hollow Shaft) Water-resistant Gearmotor/Brake Motor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram F2S (Concentric Hollow Shaft) Speed Control Gearmotor Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram F2F (Concentric Solid Shaft) Speed Control Gearmotor Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram P. C95 P. C111 P. C95 P. C99 P. C69 P. C73 P. C87 P. C5 P. C39 P. C55 P. P. C5 C9

P. C25

C1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number

F2-Type Hollow Shaft/Solid Shaft

F2-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
Shaft
Reduction Ratio Motor Capacity

Option

Auxiliary Mark

Spec. Designation

F2 S F2 F

M B

12 18

F2 S F M B

30 200

F2-Type

T25 S60 W C

T6

Series Name Classification by Mount Form

: Flange Mount Concentric Hollow Shaft : Flange Mount Concentric Solid Shaft : With Motor : With Brake Motor : With Water-resistant Motor Output Shaft material:SUS420J2 Hollow Shaft Type only : With Water-resistant Brake Motor Output Shaft material:SUS420J2 Hollow Shaft Type only With Controller : With Speed Control Gearmotor U-Type Controller Sells Separately : With Speed Control Gearmotor P-Type

Classification by Motor Type

W V U P

Frame No. and Diameter of Output shaft Shaft Arrangement for Solid Shaft

Output Shaft Diameter


gearhead

L: Output shaft on the left viewing from input shaft side.

Motor

T: Output shaft on both side viewing from input shaft side.

Reduction Ratio

10 : 110 240 : 1240 T15 T25 T40 T60 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 60W : 1-phase 90W

Motor Designation and Capacity

T90 S15 S25 S60 S90

: S40 1-phase 40W

Option
Note 1: For the types stated below, manufacturing with double voltage is not feasible. Water-resistant motors 3-phase (Single-phase can be acceptable as a special order.) Note 2: Since the water-resistant motors are specifications with exclusive cab tyre cable, the optional terminal box cannot be attached. Note 3: Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

Blank : Standard Specifications 3-phase200V50Hz 200V60Hz 220V60Hz 1-phase100V50Hz 100V60Hz W : High Voltage 3-phase380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase200V50Hz 200V60Hz T K C : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Terminal box for Speed Control type motor

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position indicator for lead-wire, terminal box and cab tyre cable Refer to the indication mark list in P. E54 for details.

C2

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C3

Model and Type Designation

C4

Concentric Hollow Shaft/ Concentric Solid Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Model and Type Designation Standard Model Lineup

F2
Type
F2S Concentric Hollow Shaft F2F Concentric Solid Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start 4 Continuous Rating

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Totally Enclosed non-ventilated or Totally Enclosed fan-cooled

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

C5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number

F2-Type Hollow Shaft/Solid Shaft

F2-Type gearmotors and gearmotor with brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Shaft
Reduction Ratio Motor Capacity

Option

Auxiliary Mark

Spec. Designation

F2 S F2 F

M B

12 18

F2 S F M B

30 200

: F2-Type

T25 S60 W C

T6

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft

: Flange Mount Concentric Hollow Shaft : Flange Mount Concentric Solid Shaft : With Motor : With Brake Motor

Output Shaft Diameter


gearhead

Shaft Arrangement for Solid Shaft Reduction Ratio

L: Output shaft on the left viewing from input shaft side.

Motor

T: Output shaft on both side viewing from input shaft side.

10 : 110 240 : 1240 T15 T25 T40 T60 T90 S15 S25 S40 S60 S90 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W 3-phase200V50Hz 200V60Hz 220V60Hz 1-phase100V50Hz 100V60Hz 3-phase380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase200V50Hz 200V60Hz

Motor Designation and Capacity

Blank : Standard Specifications W Option T K C Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

: High Voltage

: T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Mark for Additional Specs.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 such case, indicateT6 In when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C6

Model and Type Designation

Standard Model Lineup


F2S Concentric Hollow Shaft
F2S F2F

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/10 1/80 1/10 1/80 1/10 1/80 1/15 1/100 1/15 1/100 1/15 1/100 1/200 1/15 1/100 1/15 1/100 1/20 1/120 1/20 1/120 1/20 1/120 1/240 1/20 1/120 1/20 1/120 1/25 1/160 1/25 1/160 1/30 1/200 1/30 1/200 1/40 1/240 1/40 1/240 1/50 1/60 1/50 1/60 1/25 1/160 1/25 1/160 1/25 1/30 1/200 1/30 1/200 1/30 1/40 1/240 1/40 1/240 1/40 1/50 1/60 1/50 1/60 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 15W 12 1-Phase 15W 3-Phase 25W 12 1-Phase 25W Gearmotor F2SM Gearmotor with Brake F2SB 3-Phase 40W 1-Phase 40W
Note 1

12

15 12 15

1/160 1/10 1/80 1/10 1/80

3-Phase 60W 1-Phase 60W 3-Phase 90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15 1-Phase 90W

Note 1The frame number will be "15" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "15" only. 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

F2F Concentric Solid Shaft


Type
4P Motor Capacity Frame Number Output Shaft Arrangement
L

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Reduction Ratio
1/10 1/80 1/10 1/80 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

3-Phase 15W 15 1-Phase 15W 3-Phase 25W 15 1-Phase 25W

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

L T

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Speed Control Gearmotor with Brake Technical Information

Gearmotor F2FM Gearmotor with Brake F2FB 3-Phase 40W 1-Phase 40W

15
T L

1/100 1/120

Standard Motors

18
T

1/160 1/200 1/240

Cautions for Safety

Option

Note 1

3-Phase 60W 1-Phase 60W

15
T L

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/60

18
T

1/80 1/10 1/80

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

3-Phase 90W 18 1-Phase 90W

L T

1/100 1/120 1/160 1/200 1/240

Note 1The frame number will be "18" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "18" only. 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

C7

C8

F2S Concentric Hollow Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2S Concentric Hollow Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Applied new JIS Key, JIS B1301-1976 (Standard) The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when A viewing from arrowfollowing diagram.

C9

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T15 15W T15W

200/200/220

50/60/60

12 12

0.14/0.13/0.13 0.11/0.12/0.10/0.11

1350/1550/1600 E 1400/1400/1700/1700

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SM

F2SB

P.C11 Fig.C-1 3kg

P.C11 Fig.C-2 3.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C9.

C10

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-1
F2SM-12-10240-T15 F2SM-12-10240-T15W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

194

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C11

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

F2SM-12-T15 CAD Data F2SM-12-T15W

Gearmotor with Brake


Fig.C-2
F2SB-12-10240-T15 F2SB-12-10240-T15W
5.5 20 8 70 20 8 40.5 33.5 5.5 39 32 4 232 100 61 54 300

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

13.8 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

33.5 40.5

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C11

Flange surface

300

Round Weight 3.5kg

CAD Data F2SB-12-T15 F2SB-12-T15W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C11

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T25 25W T25W

200/200/220

50/60/60

12 12

0.21/0.19/0.19 0.11/0.12/0.11/0.12

1350/1550/1600 E 1350/1400/1600/1650

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 25W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SM

F2SB

P.C13 Fig.C-3 3kg

P.C13 Fig.C-4 3.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C9.

C12

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-3
F2SM-12-10240-T25 F2SM-12-10240-T25W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

194

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C13

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

F2SM-12-T25 CAD Data F2SM-12-T25W

Gearmotor with Brake


Fig.C-4
F2SB-12-10240-T25 F2SB-12-10240-T25W
5.5 20 8 70 20 8 40.5 33.5 5.5 39 32 4 232 100 61 54 300

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

13.8 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

33.5 40.5

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C13

Flange surface

300

Round Weight 3.5kg

F2SB-12-T25 CAD Data F2SB-12-T25W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C13

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T40 40W T40W

200/200/220

50/60/60

12 15 12 15

0.29/0.27/0.27 0.27/0.26/0.26 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14

1350/1550/1600 1350/1550/1550 1300/1350/1550/1600 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 12 3-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

N 88 108 137 147 177 196 226 226 245 245 275 343 343 343

kgf 9 11 14 15 18 20 23 23 25 25 28 35 35 35

F2SM

F2SB

P.C14 Fig.C-5 P.C15 Fig.C-6


400V

P.C16 Fig.C-8 3.5kg

3kg

P.C15 Fig.C-7 4kg

P.C16 Fig.C-9 4.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C9.

Gearmotor
Fig.C-5
F2SM-12-10120-T40
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300 194

12H8 20 39 81 H8

40.5 33.5

13.8 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C15

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD DataF2SM-12-T40

C14

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-6
F2SM-12-10120-T40W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

232

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 80

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C15

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD DataF2SM-12-T40W

Fig.C-7

F2SM-15-160240-T40 F2SM-15-160240-T40W
4 21 9 114 88 21 9 4 44.5 35.5 5 69.5 60.5

210

With Waterresistant Brake Motor Speed Control Gearmotor

300
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C15

Flange surface

Round Weight 4kg

CAD DataF2SM-15-T40 F2SM-15-T40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

Standard Motors

48.5

410.5

Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

Option

38

C15

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 40W


Gearmotor with Brake
Fig.C-8
F2SB-12-10120-T40 F2SB-12-10120-T40W
5.5 20 8 70 20 8 40.5 33.5 81 33.5 40.5 5.5 39 32 4 232 100 61 54 300

12H8 20 39 H8

13.8 80

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C16

Flange surface

300

Round Weight 3.5kg

F2SB-12-T40 CAD DataF2SB-12-T40W

Fig.C-9

F2SB-15-160240-T40 F2SB-15-160240-T40W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5

246.5

300

15H8 24 39 H8 96

48 39 17.3 94 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C16

Flange surface

300

Round Weight 4.5kg

CAD DataF2SB-15-T40 F2SB-15-T40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

C16

Model Code P.C6

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C17

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T60 60W T60W

200/200/220

50/60/60

12 15 15

0.42/0.39/0.39 0.40/0.36/0.36 0.17/0.17/0.17/0.17

1350/1550/1550 1350/1550/1600 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load Frame No.12 Frame No.15

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 12 15 3-phase 60W 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 15 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N 88 108 137 147 177 196 226 226

kgf 9 11 14 15 18 20 23 23

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SM

F2SB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C19 P.C20 Fig.C-10 Fig.C-12 3kg 3.5kg P.C19 P.C20 Fig.C-11 Fig.C-13
400V 400V

4kg

4.5kg

P.C19 P.C20 Fig.C-11 Fig.C-13 4kg 4.5kg

Note) As for reduction ratio 1/10 to 1/60, the frame number will be "12" for the standard voltage, "15" for the other voltage. The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C9.

C18

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-10
F2SM-12-1060-T60
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

232

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 80

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C19

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD DataF2SM-12-T60

Gearmotor
Fig.C-11
F2SM-15-80240-T60 F2SM-15-10240-T60W
4 21 9 114 88 21 9 4 44.5 35.5 5 69.5 60.5 300 210

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C19

Flange surface

Round Weight 4kg

CAD Data F2SM-15-T60 F2SM-15-T60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

Standard Motors

Cautions for Safety

48.5

410.5

Option

12.5

20

6.8

32.5

13

25

8.6

38

C19

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 60W


Gearmotor with Brake
Fig.C-12
F2SB-12-1060-T60
100 5.5 20 8 70 20 8 40.5 33.5 81 33.5 40.5 5.5 39 32 4 61 54 300 232

12H8 20 39 H8

13.8 80

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C20

Flange surface

300

Round Weight 3.5kg

CAD DataF2SB-12-T60

Fig.C-13

F2SB-15-80240-T60 F2SB-15-10240-T60W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5

246.5

300

15H8 24 39 H8 96

48 39 17.3 94 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C20

Flange surface

300

Round Weight 4.5kg

CAD Data F2SB-15-T60 F2SB-15-T60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

C20

Model Code P.C6

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C21

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T90 90W T90W

200/200/220

50/60/60

15 15

0.51/0.48/0.48 0.26/0.26/0.26/0.26

1350/1550/1550 E 1300/1350/1550/1600

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 90W 15 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SM

F2SB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C22 Fig.C-14 P.C23 Fig.C-15


400V

P.C23 Fig.C-16 4.5kg

4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C9.

Gearmotor
C-14
F2SM-15-10240-T90
4 21 9 114 88 21 9 4 44.5 35.5 5 69.5 60.5 300 210

15H8 24 39H8 96

48 39 17.3 90 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C23

Flange surface

Round Weight 4kg

CAD DataF2SM-15-T90

C22

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-15
F2SM-15-10240-T90W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15H8 24 39 H8 96

48 39 17.3 94 48 39

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C23

Flange surface

Round Weight 4kg

CAD DataF2SM-15-T90W

Gearmotor with Brake


Fig.C-16
F2SB-15-10240-T90 F2SB-15-10240-T90W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39 H8 96

48 39 17.3 94 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C23

Flange surface

300

Round Weight 4.5kg

CAD Data F2SB-15-T90 F2SB-15-T90W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C23

C24

F2S Concentric Hollow Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2S Concentric Hollow Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Applied new JIS Key, JIS B1301-1976 (Standard) The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when A viewing from arrowfollowing diagram.

C25

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

12 12

0.39/0.35 0.21/0.19

1350/1650 1350/1650

5 E 1.2

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SM

F2SB

P.C27 Fig.C-17 3kg

P.C27 Fig.C-18 3.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C25.

C26

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-17
F2SM-12-10240-S15 F2SM-12-10240-S15W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

194

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C27

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD Data F2SM-12-S15 F2SM-12-S15W

Gearmotor with Brake


Fig.C-18
F2SB-12-10240-S15 F2SB-12-10240-S15W
5.5 20 8 70 20 8 40.5 33.5 5.5 39 32 4 232 100 61 54 300

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

13.8 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

33.5 40.5

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C27

Flange surface

300

Round Weight 3.5kg

CAD Data F2SB-12-S15 F2SB-12-S15W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S25 25W S25W

100/100 200/200

50/60 50/60

12 12

0.48/0.48 0.26/0.25

1350/1600 1350/1600

7 E 1.7

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SM

F2SB

P.C29 Fig.C-19 3kg

P.C29 Fig.C-20 3.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C25.

C28

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-19
F2SM-12-10240-S25 F2SM-12-10240-S25W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor

194

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

40.5 33.5

13.8 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C29

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD DataF2SM-12-S25 F2SM-12-S25W

Gearmotor with Brake


Fig.C-20
F2SB-12-10240-S25 F2SB-12-10240-S25W
5.5 20 8 70 20 8 40.5 33.5 5.5 39 32 4 232 100 61 54 300

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39 81 H8

13.8 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

33.5 40.5

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C29

Flange surface

300

Round Weight 3.5kg

CAD DataF2SB-12-S25 F2SB-12-S25W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C29

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S40 40W S40W

100/100 200/200

50/60 50/60

12 15 12 15

0.67/0.80 0.61/0.66 0.34/0.33 0.29/0.34

1400/1650 1350/1650 1350/1600 1350/1600

12 10 2.5 2.5 E
Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 12 1-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

N 88 108 137 147 177 196 226 226 245 245 275 343 343 343

kgf 9 11 14 15 18 20 23 23 25 25 28 35 35 35

F2SM

F2SB

P.C31 Fig.C-21 3kg

P.C32 Fig.C-23 3.5kg

P.C31 Fig.C-22 4kg

P.C32 Fig.C-24 4.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C25.

C30

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-21
F2SM-12-10120-S40 F2SM-12-10120-S40W
100 5.5 20 8 70 20 8 5.5 39 32 4 61 54 300 232
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

12H8 20 39 81 H8

40.5 33.5

13.8 80

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C31

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD DataF2SM-12-S40 F2SM-12-S40W

Fig.C-22

F2SM-15-160240-S40 F2SM-15-160240-S40W
4 21 9 114 88 21 9 4 44.5 35.5 5 69.5 60.5

210

With Waterresistant Brake Motor Speed Control Gearmotor

300
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C31

Flange surface

Round Weight 4kg

F2SM-15-S40 CAD Data F2SM-15-S40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

Standard Motors

48.5

410.5

Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

Option

38

C31

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 40W


Gearmotor with Brake
Fig.C-23
F2SB-12-10120-S40 F2SB-12-10120-S40W
5.5 20 8 70 20 8 40.5 33.5 81 33.5 40.5 5.5 39 32 4 232 100 61 54 300

12H8 20 39 H8

13.8 80

Flange surface Protective cap F2S Mini Attachment 51

81 51

4M8P1.25 Refer to the detailed diagram on P. C32

Flange surface

300

Round Weight 3.5kg

CAD Data F2SB-12-S40 F2SB-12-S40W

Fig.C-24

F2SB-15-160240-S40 F2SB-15-160240-S40W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5

246.5

300

15H8 24 39 H8 96

48 39 17.3 94 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C32

Flange surface

300

Round Weight 4.5kg

F2SB-15-S40 CAD Data F2SB-15-S40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

C32

Model Code P.C6

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C33

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S60 60W S60W

100/100 200/200

50/60 50/60

15 15

0.90/1.00 0.45/0.48

1350/1600 1350/1600

15 E 3.5

Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 60W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SM

F2SB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C35 Fig.C-25 4kg

P.C35 Fig.C-26 4.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C25.

C34

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-25
F2SM-15-10240-S60 F2SM-15-10240-S60W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15H8 24 39 H8 96

48 39 17.3 94 48 39

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C35

Flange surface

Round Weight 4kg

CAD Data F2SM-15-S60 F2SM-15-S60W

Gearmotor with Brake


Fig.C-26
F2SB-15-10240-S60 F2SB-15-10240-S60W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39 H8 96

48 39 17.3 94 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C35

Flange surface

300

Round Weight 4.5kg

CAD Data F2SB-15-S60 F2SB-15-S60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C35

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S90 90W S90W

100/100 200/200

50/60 50/60

15 15

1.30/1.40 0.65/0.66

1350/1600 1350/1600

20 E 5

Totally Enclosed Fan-cooled

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 90W 15 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SM

F2SB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C37 Fig.C-27 4kg

P.C37 Fig.C-28 4.5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C25.

C36

Model Code P.C6

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-27
F2SM-15-10240-S90 F2SM-15-10240-S90W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15H8 24 39 H8 96

48 39 17.3 94 48 39

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C37

Flange surface

Round Weight 4kg

CAD Data F2SM-15-S90 F2SM-15-S90W

Gearmotor with Brake


Fig.C-28
F2SB-15-10240-S90 F2SB-15-10240-S90W
114 4 21 9 88 21 9 4 44.5 35.5 5 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39 H8 96

48 39 17.3 94 48 39

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C37

Flange surface

300

Round Weight 4.5kg

CAD Data F2SB-15-S90 F2SB-15-S90W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C37

C38

F2F Concentric Solid Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2F Concentric Solid Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when A viewing from arrowfollowing diagram.

C39

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T15 15W T15W

200/200/220

50/60/60

15 15

0.14/0.13/0.13 0.11/0.12/0.10/0.11

1350/1550/1600 E 1400/1400/1700/1700

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 15W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

F2FM

F2FB

P.C41 Fig.C-29 3kg

P.C41 Fig.C-30 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C39.

C40

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-29
F2FM-15 L -10240-T15 T F2FM-15 L -10240-T15W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C41 17 Flange surface 100 61 54 300 194
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15h6

5 76

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

LT -T15 CAD DataF2FM-15 F2FM-15 LT -T15W

Gearmotor with Brake


Fig.C-30
F2FB-15 L -10240-T15 T F2FB-15 L -10240-T15W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C41 17 Flange surface 300 100 61 54 300 232

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15h6

15h6

5 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 3.5kg

LT -T15 CAD Data F2FB-15 F2FB-15 LT -T15W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Standard Motors

48.5

Cautions for Safety

12.5

20

6.8

32.5
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C41

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T25 25W T25W

200/200/220

50/60/60

15 15

0.21/0.19/0.19 0.11/0.12/0.11/0.12

1350/1550/1600 E 1350/1400/1600/1650

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 25W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

F2FM

F2FB

P.C43 Fig.C-31 3kg

P.C43 Fig.C-32 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C39.

C42

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-31
F2FM-15 L -10240-T25 T F2FM-15 L -10240-T25W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C43 17 Flange surface 100 61 54 300 194
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15h6

5 76

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

LT -T25 CAD Data F2FM-15 F2FM-15 LT -T25W

Gearmotor with Brake


Fig.C-32
F2FB-15 L -10240-T25 T F2FB-15 L -10240-T25W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C43 17 Flange surface 300 100 61 54 300 232

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15h6

15h6

5 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 3.5kg

LT -T25 CAD Data F2FB-15 F2FB-15 LT -T25W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Standard Motors

48.5

Cautions for Safety

12.5

20

6.8

32.5
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C43

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T40 40W T40W

200/200/220

50/60/60

15 18 15 18

0.29/0.27/0.27 0.27/0.26/0.26 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14

1350/1550/1600 1350/1550/1550 1300/1350/1550/1600 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 15 3-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 18 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

F2FM

F2FB

P.C44 Fig.C-33 P.C45 Fig.C-34


400V

P.C46 Fig.C-36 3.5kg

3kg

P.C45 Fig.C-35 4kg

P.C46 Fig.C-37 4.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C39.

Gearmotor
Fig.C-33
F2FM-15 L -10120-T40 T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C45 17 Flange surface 100 61 54 300 194

15h6

5 76

Flange surface

Round Weight 3kg

CAD DataF2FM-15 LT -T40

C44

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-34
F2FM-15 -10120-T40W
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C45 17 Flange surface 100 61 54 300 232
L T
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15h6

15h6

5 80

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

CAD DataF2FM-15 LT -T40W

Fig.C-35

F2FM-18 L -160240-T40 T F2FM-18 L -160240-T40W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C45 20.5 Flange surface 39 6 90 114 69.5 60.5 300 210

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4kg

LT -T40 CAD Data F2FM-18 F2FM-18 LT -T40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Frame number 18 output shaft inner diameter 18


4-M10P1.5

Standard Motors

48.5

410.5
Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

38

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C45

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 40W


Gearmotor with Brake
Fig.C-36
F2FB-15 L -10120-T40 T F2FB-15 L -10120-T40W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C46 17 Flange surface 300 100 61 54 300 232

15h6

15h6

5 80

Flange surface

Round Weight 3.5kg

LT -T40 CAD Data F2FB-15 F2FB-15 LT -T40W

Fig.C-37

F2FB-18 L -160240-T40 T F2FB-18 L -160240-T40W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 39 6 94 114 69.5 60.5 300 246.5

Flange surface

96

4M10P1.5 Refer to the detailed diagram on P. C46

20.5 Flange surface 300

Round Weight 4.5kg

F2FB-18 LT -T40 CAD Data F2FB-18 LT -T40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
48.5 4-M8P1.25

Frame number 18 output shaft inner diameter 18


410.5

4-M10P1.5

12.5

20

6.8

32.5

13

25

8.6

38

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C46

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C47

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T60 60W T60W

200/200/220

50/60/60

15 18 18

0.42/0.39/0.39 0.40/0.36/0.36 0.17/0.17/0.17/0.17

1350/1550/1550 1350/1550/1600 1300/1350/1550/1600 E


Totally Enclosed or Totally Enclosed Fan-cooled

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20
Note

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

F2FM

F2FB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

15 18 3-phase 60W

1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

P.C49 Fig.C-38 3kg P.C49 Fig.C-39


400V

P.C50 Fig.C-40 3.5kg P.C50 Fig.C-41


400V

4kg

4.5kg

18

P.C49 Fig.C-39 4kg

P.C50 Fig.C-41 4.5kg

Note) As for reduction ratio 1/10 to 1/60, the frame number will be "15" for the standard voltage, "18" for the other voltage. The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C39.

C48

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-38
F2FM-15 -1060-T60
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C49 17 Flange surface 100 61 54 300 232
L T
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15h6

15h6

5 80

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

CAD DataF2FM-15 LT -T60

Fig.C-39

F2FM-18 L -80240-T60 T F2FM-18 L -10240-T60W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C49 20.5 Flange surface 39 6 90 114 69.5 60.5 300 210

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4kg

LT -T60 CAD Data F2FM-18 F2FM-18 LT -T60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Frame number 18 output shaft inner diameter 18

4-M10P1.5

48.5

410.5

Standard Motors

Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

38
Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C49

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 60W


Gearmotor with Brake
Fig.C-40
F2FB-15 L -1060-T60 T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C50 17 Flange surface 300 100 61 54 300 232

15h6

15h6

5 80

Flange surface

Round Weight 3.5kg

CAD DataF2FB-15 LT -T60

Fig.C-41

F2FB-18 L -80240-T60 T F2FB-18 L -10240-T60W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C50 20.5 Flange surface 300 39 6 94 114 69.5 60.5 300 246.5

Flange surface

Round Weight 4.5kg

F2FB-18 LT -T60 CAD Data F2FB-18 LT -T60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Frame number 18 output shaft inner diameter 18

4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C50

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C51

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft3-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T90 90W T90W

200/200/220

50/60/60

18 18

0.51/0.48/0.48 0.26/0.26/0.26/0.26

1350/1550/1550 E 1300/1350/1550/1600

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 90W 18 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

F2FM

F2FB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C52 Fig.C-42 P.C53 Fig.C-43


400V

P.C53 Fig.C-44 4.5kg

4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C39.

Gearmotor
Fig.C-42
F2FM-18 L -10240-T90 T
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C53 20.5 Flange surface 39 6 90 114 69.5 60.5 300 210

Flange surface

Round Weight 4kg

CAD DataF2FM-18 LT -T90

C52

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor with Brake


Fig.C-43
F2FM-18 -10240-T90W
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C53 20.5 Flange surface 39 6 94 114 69.5 60.5 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

L T

Parallel Shaft Performance Table/ Dimension

246.5

Gearmotor with Brake

Flange surface

Round Weight 4kg

CAD DataF2FM-18 LT -T90W

Fig.C-44

F2FB-18 L -10240-T90 T F2FB-18 L -10240-T90W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C53 20.5 Flange surface 300 39 6 94 114 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4.5kg

F2FB-18 LT -T90 CAD Data F2FB-18 LT -T90W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

410.5

Standard Motors

13

25

8.6

38

Cautions for Safety

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C53

C54

F2F Concentric Solid Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2F Concentric Solid Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when A viewing from arrowfollowing diagram.

C55

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

15 15

0.39/0.35 0.21/0.19

1350/1650 1350/1650

5 E 1.2

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

F2FM

F2FB

P.C57 Fig.C-45 3kg

P.C57 Fig.C-46 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C55.

C56

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-45
F2FM-15 L -10240-S15 T F2FM-15 L -10240-S15W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C57 17 Flange surface 100 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor Parallel Shaft Performance Table/ Dimension

194

Gearmotor with Brake

15h6

5 76
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

F2FM-15 LT -S15 CAD Data F2FM-15 LT -S15W

Gearmotor with Brake


Fig.C-46
F2FB-15 L -10240-S15 T F2FB-15 L -10240-S15W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C57 17 Flange surface 300 100 61 54 300 232

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15h6

15h6

5 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 3.5kg

LT -S15 CAD Data F2FB-15 F2FB-15 LT -S15W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Standard Motors

48.5

Cautions for Safety

12.5

20

6.8

32.5
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C57

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S25 25W S25W

100/100 200/200

50/60 50/60

15 15

0.48/0.48 0.26/0.25

1350/1600 1350/1600

7 E 1.7

Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

F2FM

F2FB

P.C59 Fig.C-47 3kg

P.C59 Fig.C-48 3.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C55.

C58

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-47
F2FM-15 L -10240-S25 T F2FM-15 L -10240-S25W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C59 17 Flange surface 100 61 54 300
Waterresistant Gearmotor with Brake Speed Control Gearmotor Parallel Shaft Performance Table/ Dimension

194

Gearmotor with Brake

15h6

15h6

5 76
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

F2FM-15 LT -S25 CAD Data F2FM-15 LT -S25W

Gearmotor with Brake


Fig.C-48
F2FB-15 L -10240-S25 T F2FB-15 L -10240-S25W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C59 17 Flange surface 300 100 61 54 300 232

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15h6

15h6

5 80

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 3.5kg

LT -S25 CAD Data F2FB-15 F2FB-15 LT -S25W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Standard Motors

48.5

Cautions for Safety

12.5

20

6.8

32.5
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C59

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S40 40W S40W

100/100 200/200

50/60 50/60

15 18 15 18

0.67/0.80 0.61/0.66 0.34/0.33 0.29/0.34

1400/1650 1350/1650 1350/1600 1350/1600

12 10 2.5 2.5 E
Totally Enclosed or Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 15 1-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 18 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

F2FM

F2FB

P.C61 Fig.C-49 3kg

P.C62 Fig.C-51 3.5kg

P.C61 Fig.C-50 4kg

P.C62 Fig.C-52 4.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C55.

C60

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-49
F2FM-15 L -10120-S40 T F2FM-15 L -10120-S40W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C61 17 Flange surface 100 61 54 300 232
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

15h6

15h6

5 80

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface

Round Weight 3kg

LT -S40 CAD Data F2FM-15 F2FM-15 LT -S40W

Fig.C-50

F2FM-18 L -160240-S40 T F2FM-18 L -160240-S40W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C61 20.5 Flange surface 39 6 90 114 69.5 60.5 300 210

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4kg

LT -S40 CAD Data F2FM-18 F2FM-18 LT -S40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Frame number 18 output shaft inner diameter 18


4-M10P1.5

Standard Motors

48.5

410.5
Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

38

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C61

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 40W


Gearmotor with Brake
Fig.C-51
F2FB-15 L -10120-S40 T F2FB-15 L -10120-S40W T
137 68.5 27 24 68.5 27 24 39 32 40.5 33.5 81 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C62 17 Flange surface 300 100 61 54 300 232

15h6

15h6

5 80

Flange surface

Round Weight 3.5kg

F2FB-15 LT -S40 CAD Data F2FB-15 LT -S40W

Fig.C-52

F2FB-18 L -160240-S40 T F2FB-18 L -160240-S40W T


158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C62 20.5 Flange surface 300 39 6 94 114 69.5 60.5 300 246.5

Flange surface

Round Weight 4.5kg

LT -S40 CAD Data F2FB-18 F2FB-18 LT -S40W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

Frame number 18 output shaft inner diameter 18

4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C62

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C63

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S60 60W S60W

100/100 200/200

50/60 50/60

18 18

0.90/1.00 0.45/0.48

1350/1600 1350/1600

15 E 3.5

Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 60W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

F2FM

F2FB

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C65 Fig.C-53 4kg

P.C65 Fig.C-54 4.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C55.

C64

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-53
F2FM-18 L -10240-S60 T F2FM-18 L -10240-S60W T
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C65 20.5 Flange surface
GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

246.5 114 69.5 60.5 300

39

6 94
Gearmotor with Clutch /Brake

Flange surface

Round Weight 4kg

LT -S60 CAD Data F2FM-18 F2FM-18 LT -S60W

Gearmotor with Brake


Fig.C-54
F2FB-18 L -10240-S60 T F2FB-18 L -10240-S60W T
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C65 20.5 Flange surface 300 39 6 94 114 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4.5kg

LT -S60 CAD Data F2FB-18 F2FB-18 LT -S60W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

Standard Motors

410.5

Cautions for Safety

13

25

8.6

38
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C65

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR Mini Series

F2-Type F2F Concentric Solid Shaft1-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S90 90W S90W

100/100 200/200

50/60 50/60

18 18

1.30/1.40 0.65/0.66

1350/1600 1350/1600

20 E 5

Totally Enclosed Fan-cooled

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 90W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

F2FM

F2FB

P.C67 Fig.C-55 4kg

P.C67 Fig.C-56 4.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C55.

C66

Model Code P.C6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-55
F2FM-18 L -10240-S90 T F2FM-18 L -10240-S90W T
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C67 20.5 Flange surface
GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

246.5 114 69.5 60.5 300

39

6 94
Gearmotor with Clutch /Brake

Flange surface

Round Weight 4kg

LT -S90 CAD Data F2FM-18 F2FM-18 LT -S90W

Gearmotor with Brake


Fig.C-56
F2FB-18 L -10240-S90 T F2FB-18 L -10240-S90W T
158 79 30 27 79 30 27 44.5 35.5 48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C67 20.5 Flange surface 300 39 6 94 114 69.5 60.5 300 246.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface

Round Weight 4.5kg

LT -S90 CAD Data F2FB-18 F2FB-18 LT -S90W

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

Standard Motors

410.5

Cautions for Safety

13

25

8.6

38
In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Option

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

C67

C68

F2S Concentric Hollow Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Model and Type Designation Standard Model Lineup

F2
Type
F2S Concentric Hollow Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W90W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start Totally Enclosed 4 Continuous Rating

1-Phase
15W60W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) SUS420J2 Aluminium die-cast 1040 100% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

C69

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number Reduction Ratio Motor Capacity

F2-TypeConcentric Hollow Shaft IP-65 Water-Resistant

F2-Type Water-resistant(IP65) Gearmotor/Brake Motor are classified by codes as shown below. Specify these codes in your inquiry and order.
Auxiliary Mark Spec. Designation

F2 S F2 S

W V

12 15

30 200

F2 S W V

T25 S40

H3

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft Reduction Ratio

: F2-Type : Flange Mount Concentric Hollow Shat With Water-resistant IP65 Motor : With Water-resistant IP65 Brake Motor

Output Shaft Diameter 10 : 110 240 : 1240 T15 T25 T40 T60 T90 S15 S25 S40 : 3-phase 15W : 3-phase 25W : 3-phase 40W : 3-phase 60W : 3-phase 90W : 1-phase 15W : 1-phase 25W : 1-phase 40W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz Blank : Standard Specs. X : Mark for Additional Specs.

Motor Designation and Capacity

Standard Volatage/Frequency Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Position Indicator for cab tyre cable Refer to the indication mark list in P. E54 for details.

Only F2S (hollow shaft) is available in the FS-Type Water-resistant gearmotor. F2F (solid shaft) is not available, which please note.

C70

Model and Type Designation

Standard Model Lineup


Type
4P Motor Capacity Frame Number

Reduction Ratio
1/10 1/80 1/10 1/80 1/10 1/80 1/15 1/100 1/15 1/100 1/15 1/100 1/200 1/15 1/100 1/15 1/100 1/15 1/100 1/20 1/120 1/20 1/120 1/20 1/120 1/240 1/20 1/120 1/20 1/120 1/20 1/120 1/25 1/160 1/25 1/160 1/25 1/160 1/30 1/200 1/30 1/200 1/30 1/200 1/40 1/240 1/40 1/240 1/40 1/240 1/50 1/60 1/50 1/60 1/50 1/60 1/25 1/160 1/25 1/160 1/25 1/30 1/200 1/30 1/200 1/30 1/40 1/240 1/40 1/240 1/40 1/50 1/60 1/50 1/60 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 15W 12 1-Phase 15W 3-Phase 25W 12 1-Phase 25W Gearmotor F2SW 3-Phase 40W Gearmotor with Brake F2SV 1-Phase 40W 15 12

1/160 1/10 1/80 1/10 1/80 1/10 1/80

15

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 60W

15

3-Phase 90W

15

With Waterresistant Brake Motor Speed Control Gearmotor

Note 1Single-phase of 60W 90W is not available. 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C71

C72

F2S Concentric Hollow Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2S Concentric Hollow Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Applied new JIS Key, JIS B1301-1976 (Standard) The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired according to the diagram shown on page E30, the shaft rotates clock wise when viewing from arrow A following diagram.

C73

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

15W

T15

200/200/220

50/60/60

12

0.14/0.13/0.13

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SW

F2SV

P.C75 Fig.C-57 3.5kg

P.C75 Fig.C-58 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C73.

C74

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-57
F2SW-12-10240-T15
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.6 2000mm 208 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

12H8 20 39H8 81

40.5 33.5

59 13.8 76

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

33.5 40.5

Flange surface Protective cap F2S Mini Attachment


51

81 51

4M8P1.25

Refer to the detailed diagram on P. C75

Flange surface

9.5

Round Weight 3.5kg

CAD DataF2SW-12-T15

Gearmotor with Brake


Fig.C-58
F2SV-12-10240-T15
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.7 2000mm 230 34 22

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39H8 81

40.5 33.5

59 13.8 76 61.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

33.5 40.5 81 51 51 4M8P1.25

Flange surface Protective cap F2S Mini Attachment

Refer to the detailed diagram on P. C75

Flange surface

Round Weight 4kg

CAD DataF2SV-12-T15

Speed Control Gearmotor with Brake Technical Information

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C75

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

25W

T25

200/200/220

50/60/60

12

0.21/0.19/0.19

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 25W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SW

F2SV

P.C77 Fig.C-59 3.5kg

P.C77 Fig.C-60 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C73.

C76

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-59
F2SW-12-10240-T25
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.6 2000mm 208 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

12H8 20 39H8 81

40.5 33.5

59 13.8 76

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

33.5 40.5

Flange surface Protective cap F2S Mini Attachment


51

81 51

4M8P1.25

Refer to the detailed diagram on P. C77

Flange surface

9.5

Round Weight 3.5kg

CAD DataF2SW-12-T25

Gearmotor with Brake


Fig.C-60
F2SV-12-10240-T25
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.7 2000mm 230 34 22

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39H8 81

40.5 33.5

59 13.8 76 61.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

33.5 40.5 81 51 51 4M8P1.25

Flange surface Protective cap F2S Mini Attachment

Refer to the detailed diagram on P. C77

Flange surface

Round Weight 4kg

CAD DataF2SV-12-T25

Speed Control Gearmotor with Brake Technical Information

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C77

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

40W

T40

200/200/220

50/60/60

12 15

0.29/0.27/0.27 0.27/0.26/0.26

1350/1550/1600 1350/1550/1550

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 12 3-phase 40W 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 15 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

N 88 108 137 147 177 196 226 226 245 245 275 343 343 343

kgf 9 11 14 15 18 20 23 23 25 25 28 35 35 35

F2SW

F2SV

P.C79 Fig.C-61 3.5kg

P.C80 Fig.C-63 4kg

P.C79 C-62 4.5kg

P.C80 C-64 5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C73.

C78

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-61
F2SW-12-10120-T40
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.6 2000mm 208 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

12H8 20 39H8 81

40.5 33.5

59 13.8 76

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

33.5 40.5

Flange surface Protective cap F2S Mini Attachment


51

81 51

4M8P1.25

Refer to the detailed diagram on P. C79

Flange surface

9.5

Round Weight 3.5kg

CAD DataF2SW-12-T40

Fig.C-62

F2SW-15-160240-T40
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.6 2000mm 224 34

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

15H8 2439H8 96

48 39 17.3 90 48 39

65.5

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Flange surface Protective cap F2S Mini Attachment


60

96 60

4M10P1.5

Refer to the detailed diagram on P. C79

Flange surface

7.5

Round Weight 4.5kg

CAD DataF2SW-15-T40

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

Standard Motors

48.5

410.5

Cautions for Safety

12.5

20

6.8

32.5

13

25

8.6

Option

38

C79

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 40W


Gearmotor with Brake
Fig.C-63
F2SV-12-10120-T40
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.7 2000mm 230 34 22

12H8 20 39H8 81

40.5 33.5

59 13.8 76 61.5

33.5 40.5

Flange surface
51

81 51

4M8P1.25

Refer to the detailed diagram on P. C80

Flange surface

Protective cap F2S Mini Attachment

Round Weight 4kg

CAD DataF2SV-12-T40

Fig.C-64

F2SV-15-160240-T40
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.7 2000mm 247.5 34 23.5

15H8 24 39H8 96

48 39 17.3 90 48 39

65.5

77

Flange surface
60

96 60

4M10P1.5

Refer to the detailed diagram on P. C80

Flange surface

Protective cap F2S Mini Attachment

Round Weight 5kg

CAD DataF2SV-15-T40

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Frame number 15 output shaft inner diameter 15


4-M10P1.5

48.5

410.5

12.5

20

6.8

32.5

13

25

8.6

38

C80

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

C81

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 60W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

60W

T60

200/200/220

50/60/60

15

0.40/0.36/0.36

1350/1550/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 60W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SW

F2SV

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

P.C83 Fig.C-65 4.5kg

P.C83 Fig.C-66 5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C73.

C82

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-65
F2SW-15-10240-T60
4 21 9 46 88 21 9 44.5 35.5 5

F2SW-15-10240-T90
4 114 69.5 60.5 Cab tyre cable 7.6 2000mm 224 34

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

15H8 2439H8 96

48 39 17.3 90 48 39

65.5

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

96 60 60

4M10P1.5

Refer to the detailed diagram on P. C83

Flange surface

7.5

Round Weight 4.5kg

F2SW-15-T60 CAD Data F2SW-15-T90

Gearmotor with Brake


Fig.C-66
F2SV-15-10240-T60
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.7 2000mm

With Waterresistant Brake Motor

F2SV-15-10240-T90
247.5 34 23.5

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

65.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

77

Flange surface
60

96 60

4M10P1.5

Refer to the detailed diagram on P. C83

Flange surface

Protective cap F2S Mini Attachment

Round Weight 5kg

CAD Data F2SV-15-T60 F2SV-15-T90

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C83

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft3-Phase 90W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed Insulation Protective Classification system rpm

90W

T90

200/200/220

50/60/60

15

0.51/0.48/0.48

1350/1550/1550

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 90W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SW

F2SV

P.C85 Fig.C-67 4.5kg

P.C85 Fig.C-68 5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C73.

C84

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-67
F2SW-15-10240-T60
4 21 9 46 88 21 9 44.5 35.5 5

F2SW-15-10240-T90
4 114 69.5 60.5 Cab tyre cable 7.6 2000mm 224 34

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

15H8 2439H8 96

48 39 17.3 90 48 39

65.5

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

96 60 60

4M10P1.5

Refer to the detailed diagram on P. C85

Flange surface

7.5

Round Weight 4.5kg

CAD Data F2SW-15-T60 F2SW-15-T90

Gearmotor with Brake


Fig.C-68
F2SV-15-10240-T60
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.7 2000mm

With Waterresistant Brake Motor

F2SV-15-10240-T90
247.5 34 23.5

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

65.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

77

Flange surface
60

96 60

4M10P1.5

Refer to the detailed diagram on P. C85

Flange surface

Protective cap F2S Mini Attachment

Round Weight 5kg

CAD Data F2SV-15-T60 F2SV-15-T90

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C85

C86

F2S Concentric Hollow Shaft IP-65

Gearmotor

Water-Resistant Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

F2
Type
F2S Concentric Hollow Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Applied new JIS Key, JIS B1301-1976 (Standard) The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired according to the diagram shown on page E30, the shaft rotates clock wise when viewing from arrow A following diagram.

C87

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

15W

S15

100/100

50/60

12

0.39/0.35

1350/1650

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SW

F2SV

P.C89 Fig.C-69 3.5kg

P.C89 Fig.C-70 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C87.

C88

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-69
F2SW-12-10240-S15
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.6 2000mm 208 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

12H8 20 39H8 81

40.5 33.5

59 13.8 76

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

33.5 40.5

Flange surface Protective cap F2S Mini Attachment


51

81 51

4M8P1.25

Refer to the detailed diagram on P. C89

Flange surface

9.5

Round Weight 3.5kg

CAD DataF2SW-12-S15

Gearmotor with Brake


Fig.C-70
F2SV-12-10240-S15
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.7 2000mm 230 34 22

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39H8 81

40.5 33.5

59 13.8 76 61.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

33.5 40.5

Flange surface
51

81 51

4M8P1.25

Refer to the detailed diagram on P. C89

Flange surface

Protective cap F2S Mini Attachment

Round Weight 4kg

CAD DataF2SV-12-S15

Speed Control Gearmotor with Brake Technical Information

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C89

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

25W

S25

100/100

50/60

12

0.48/0.48

1350/1600

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

F2SW

F2SV

P.C91 Fig.C-71 3.5kg

P.C91 Fig.C-72 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C87.

C90

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-71
F2SW-12-10240-S25
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.6 2000mm 208 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

12H8 20 39H8 81

40.5 33.5

59 13.8 76

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

33.5 40.5

Flange surface Protective cap F2S Mini Attachment


51

81 51

4M8P1.25

Refer to the detailed diagram on P. C91

Flange surface

9.5

Round Weight 3.5kg

CAD DataF2SW-12-S25

Gearmotor with Brake


Fig.C-72
F2SV-12-10240-S25
5.5 20 8 46 70 20 8 39 32 4 5.5 100 61 54 Cab tyre cable 7.7 2000mm 230 34 22

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

12H8 20 39H8 81

40.5 33.5

59 13.8 76 61.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

33.5 40.5

Flange surface
51

81 51

4M8P1.25

Refer to the detailed diagram on P. C91

Flange surface

Protective cap F2S Mini Attachment

Round Weight 4kg

CAD DataF2SV-12-S25

Speed Control Gearmotor with Brake Technical Information

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

Standard Motors

Cautions for Safety

48.5

Option

12.5

20

6.8

32.5

C91

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor Water-Resistant Gearmotor with Brake


GTR Mini Series

F2-Type F2S Concentric Hollow Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

40W

S40

100/100

50/60

15

0.61/0.66

1350/1650

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor

Gearmotor with Brake

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 40W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

F2SW

F2SV

P.C93 Fig.C-73 4.5kg

P.C93 Fig.C-74 5kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C87.

C92

Model Code P.C70

Cab tyre cable Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Gearmotor
Fig.C-73
F2SW-15-10240-S40
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.6 2000mm 224 34
Gearmotor with Brake Waterresistant Gearmotor with Brake Parallel Shaft Performance Table/ Dimension

15H8 2439H8 96

48 39 17.3 90 48 39

65.5

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Flange surface Protective cap F2S Mini Attachment

96 60 60

Refer to the detailed diagram on P. C93

4M10P1.5

Flange surface

7.5

Round Weight 4.5kg

CAD DataF2SW-15-S40

Gearmotor with Brake


Fig.C-74
F2SV-15-10240-S40
4 21 9 46 88 21 9 44.5 35.5 5 4 114 69.5 60.5 Cab tyre cable 7.7 2000mm 247.5 34 23.5

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

15H8 24 39H8 96

48 39 17.3 90 48 39

65.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

77

Flange surface
60

96 60

4M10P1.5

Refer to the detailed diagram on P. C93

Flange surface

Protective cap F2S Mini Attachment

Round Weight 5kg

CAD DataF2SV-15-S40

Speed Control Gearmotor with Brake Technical Information

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

Standard Motors

Cautions for Safety

410.5

Option

13

25

8.6

38

C93

C94

Concentric Hollow Shaft/ Concentric Solid Shaft

Gearmotor

Speed Control Gearmotor


Model and Type Designation Standard Model Lineup

F2
Type
F2S Concentric Hollow Shaft F2F Concentric Solid Shaft

Number of phase Capacity Power Source Motor Part Insulation Classification Starting Method Protective cooling Method Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft Output Shaft Material Case Material Ambient Temperature Ambient Humidity Ambient Conditions Altitude Environment Installation Location Painting Painting Method Painting Color Mounting Direction

1-Phase
15W90W 100V 50/60Hz Class E Capacitor Start Totally Enclosed (6090W models are forced fan attached.) 4 Continuous Rating Hypoid Gear and Helical Gear Grease Lubrication(Maintenance Free) New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

C95

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR Mini Series

Model and Type Designation


Type
Frame Number

F2-Type Hollow Shaft/Solid Shaft

G-Type Speed Control Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
Shaft
Reduction Ratio Motor Capacity

Option

Auxiliary Mark

Spec. Designation

F2 S F2 F

U P

12 18

F2 S F U P

30 240

: F2-Type

S25 S90 W C

Series Name Classification by Mount Form Classification by Motor Type Frame No. and Diameter of Output shaft

Concentric Hollow Shaft Concentric Solid Shaft : With Speed Control Gearmotor : With Speed Control Gearmotor U-Type With Controller P-Type Controller Sells Separately

Output Shaft Diameter


gearhead

Shaft Arrangement for Solid Shaft Reduction Ratio

L: Output shaft on the left viewing from input shaft side.

Motor

T: Output shaft on both side viewing from input shaft side.

10 : 110 240 : 1240 S15 S25 : 1-phase 15W : 1-phase 25W : 1-phase 40W : 1-phase 60W : 1-phase 90W 1-phase100V50Hz 100V60Hz W C : High Voltage 1-phase200V50Hz 200V60Hz : P-Type Terminal Box : Mark for Additional Specs. Blank : Standard Specs. X

Motor Designation and Capacity

S40 S60 S90

Blank : Standard Specifications Option


Note 1: In case you require products with terminal box, indicate "C" at the end of capacity designation. (P-Type only)

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Position indicator for lead wire/terminal box. Refer to the indication mark list in P. E54 for details.

Controller
Type Designation
GTR Mini-Series controllers are classified by codes as shown below. These codes are required for your inquiry and/or order.
Type
Voltage Function Motor Type

SC P

10 1

Blank : U-Type L : P-Type Function


0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running

Voltage

10 single-phase 100V 20 single-phase 200V

U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors) SC: Speed Controller (generic name)

C96

Model and Type Designation

Standard Model Lineup


F2S Concentric Hollow Shaft
U-Type P-Type Controller Sells Separately

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/10 1/80 1/10 1/80 1/15 1/100 1/15 1/100 1/15 1/100 1/15 1/100 1/15 1/100 1/20 1/120 1/20 1/120 1/20 1/120 1/20 1/120 1/20 1/120 1/25 1/160 1/25 1/160 1/25 1/160 1/25 1/160 1/25 1/160 1/30 1/200 1/30 1/200 1/30 1/200 1/30 1/200 1/30 1/200 1/40 1/240 1/40 1/240 1/40 1/240 1/40 1/240 1/40 1/240 1/50 1/60 1/50 1/60 1/50 1/60 1/50 1/60 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 15W

12

1-Phase 25W

12

Speed Control Gearmotor F2SU F2SP

1-Phase 40W

15

1/10 1/80 1/10 1/80 1/10 1/80

1-Phase 60W

15

1-Phase 90W

15

With Waterresistant Brake Motor

Note 1 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

F2F Concentric Solid Shaft


U-Type

Speed Control Gearmotor

P-Type Controller Sells Separately


Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Type

4P Motor Capacity

Frame Number

Output Shaft Arrangement


L

Reduction Ratio
1/10 1/80 1/10 1/80 1/10 1/80 1/10 1/80 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

1-Phase 15W

15
T L

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

1-Phase 25W

15
T L

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Technical Information

Standard Motors

Speed Control Gearmotor F2FU F2FP

1-Phase 40W

18
T L

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Cautions for Safety

1-Phase 60W

18
T L

Option

1/100 1/120 1/160 1/200 1/240 1/15 1/20 1/25 1/30 1/40 1/50 1/60

1-Phase 90W

18
T

1/100 1/120 1/160 1/200 1/240

Note 1 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

C97

C98

F2S Concentric Hollow Shaft

Gearmotor

Speed Control Gearmotor


Performance Table Dimension diagram

F2
Type
F2S Concentric Hollow Shaft

1-Phase
Remarks The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N m{kgf m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. Applied new JIS Key, JIS B1301-1976 (Standard) The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from arrowfollowing diagram. A

C99

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2S Concentric Hollow Shaft1-Phase 15W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S15 15W S15W

100/100 200/200

50/60 50/60

12 12

0.6/0.6 0.3/0.3

5001350/5501650 6001400/7501700

6 E 1.5
Totally Enclosed

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2SU

F2SP

70 100V 60 200V

P.C100 Fig.C-75 3kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C99.

Fig.C-75

F2SU-12-10240-S15 F2SU-12-10240-S15W
5.5 20 8

F2SP-12-10240-S15 F2SP-12-10240-S15W
205 100 11 61 54 4 300 5.5 20 8

70

39 32

12H8 20 39 H8 81

40.5 33.5

13.8 40 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C101

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

F2SU-12-S15 CAD Data F2SU-12-S15W

F2SP-12-S15 F2SP-12-S15W

C100

Model Code P.C96

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 15W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

48.5

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

12.5

20

6.8

32.5

Technical Information

Standard Motors

Cautions for Safety

Option

C101

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2S Concentric Hollow Shaft1-Phase 25W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S25 25W S25W

100/100 200/200

50/60 50/60

12 12

0.6/0.6 0.4/0.4

7501350/10001650 8501350/10001650

8 E 2
Totally Enclosed

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N 88 108 137 147 177 196 226 226 245 245 275 275 275 275

kgf 9 11 14 15 18 20 23 23 25 25 28 28 28 28

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2SU

F2SP

50 100V 45 200V

P.C102 Fig.C-76 3kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C99.

Fig.C-76

F2SU-12-10240-S25 F2SU-12-10240-S25W
5.5 20 8

F2SP-12-10240-S25 F2SP-12-10240-S25W
205 100 11 61 54 4 300 5.5 20 8

70

39 32

12H8 20 39 H8 81

40.5 33.5

13.8 40 76

33.5 40.5 81 51 51 4M8P1.25 Refer to the detailed diagram on P. C103

Flange surface

Protective cap F2S Mini Attachment

Flange surface

Round Weight 3kg

CAD Data F2SU-12-S25 F2SU-12-S25W

F2SP-12-S25 F2SP-12-S25W

C102

Model Code P.C96

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 25W
Frame No.12 22/100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Frame No.12 22/200V


50Hz 60Hz

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 12 output shaft inner diameter 12
4-M8P1.25

48.5

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

12.5

20

6.8

32.5

Technical Information

Standard Motors

Cautions for Safety

Option

C103

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2S Concentric Hollow Shaft1-Phase 40W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S40 40W S40W

100/100 200/200

50/60 50/60

15 15

0.9/0.9 0.5/0.5

8001350/10501650 9001350/13001650

12 E 3
Totally Enclosed

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 40W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2SU

F2SP

40 100V 200V

P.C104 Fig.C-77 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. Be sure to read the cautions stated on Page C99.

Fig.C-77

F2SU-15-10240-S40 F2SU-15-10240-S40W
4 21 9 88

F2SP-15-10240-S40 F2SP-15-10240-S40W
221 114 4 21 9 44.5 35.5 5 69.5 60.5 300 11

15H8 24 39H8 96

48 39 17.3 40 90 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C105

Flange surface

Round Weight 4kg

F2SU-15-S40 CAD Data F2SU-15-S40W

F2SP-15-S40 F2SP-15-S40W

C104

Model Code P.C96

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 40W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150 Torque Torque

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

410.5

13

25

8.6

38

Technical Information

Standard Motors

Cautions for Safety

Option

C105

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2S Concentric Hollow Shaft1-Phase 60W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S60 60W S60W

100/100 200/200

50/60 50/60

15 15

1.0/1.7 0.8/0.9

7001350/8001650 7001350/8001650

20 E 5
Totally Enclosed
forced fan attached

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 60W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2SU

F2SP

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60 100V 55 200V

P.C106 Fig.C-78 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C99.

Fig.C-78

F2SU-15-10240-S60 F2SU-15-10240-S60W
4 21 9

F2SP-15-10240-S60 F2SP-15-10240-S60W
254 114 4 69.5 60.5 5 300 4 21 9

88

44.5 35.5

15H8 24 39 H8 96

48 39 17.3 92 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C107

Flange surface

Round Weight 4kg

CAD Data F2SU-15-S60 F2SU-15-S60W

F2SP-15-S60 F2SP-15-S60W

C106

Model Code P.C96

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm Black Black

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 60W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

150 Torque Torque

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

410.5

13

25

8.6

38

Technical Information

Standard Motors

Cautions for Safety

Option

C107

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2S Concentric Hollow Shaft1-Phase 90W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S90 90W S90W

100/100 200/200

50/60 50/60

15 15

1.4/2.0 0.9/1.0

9501300/11501600 10001350/11501600

26 E 6.5
Totally Enclosed
forced fan attached

Motor Capacity

Frame Reduction Ratio No.

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output shaft Allowable Thrust Load

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 90W 15 1/ 50 1/ 60 1/ 80 1/100 1/120


1/160 1/200 1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

N 108 147 186 226 245 275 294 294 324 324 343 343 343 343

kgf 11 15 19 23 25 28 30 30 33 33 35 35 35 35

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2SU

F2SP

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

40

P.C108 Fig.C-79 4kg

Note) The allowable O.H.L. are the values measured at the position of 10mm from the edge of output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C99.

Fig.C-79

F2SU-15-10240-S90 F2SU-15-10240-S90W
4 21 9

F2SP-15-10240-S90 F2SP-15-10240-S90W
254 114 4 69.5 60.5 5 300 4 21 9

88

44.5 35.5

15H8 24 39 H8 96

48 39 17.3 92 48 39

Flange surface Protective cap F2S Mini Attachment 60

96 60

4M10P1.5 Refer to the detailed diagram on P. C109

Flange surface

Round Weight 4kg

CAD Data F2SU-15-S90 F2SU-15-S90W

F2SP-15-S90 F2SP-15-S90W

C108

Model Code P.C96

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 90W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm Black Black

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 90W Frame No.18 28 32/100V Frame No.18 28 32/200V
50Hz 60Hz 200 200 50Hz 60Hz

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M10P1.5

410.5

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

13

25

8.6

38

Technical Information

Standard Motors

Cautions for Safety

Option

C109

C110

F2F Concentric Solid Shaft

Gearmotor

Speed Control Gearmotor


Performance Table Dimension diagram

F2
Type
F2F Concentric Solid Shaft

1-Phase
Remarks The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N m{kgf m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. The key for the output shaft is not attached to this model. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when A viewing from arrowfollowing diagram.

C111

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2F Concentric Solid Shaft1-Phase 15W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S15 15W S15W

100/100 200/200

50/60 50/60

15 15

0.6/0.6 0.3/0.3

5001350/5501650 6001400/7501700

6 E 1.5
Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N m 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7

kgf m 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2FU

F2FP

70 100V 60 200V

P.C112 Fig.C-80 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C111.

Fig.C-80

F2FU-15 L -10240-S15 T F2FU-15 L -10240-S15W T


137 68.5 27 24

F2FP-15 L -10240-S15 T F2FP-15 L -10240-S15W T


205 100 68.5 27 24 39 32 17 61 54 300 11

15h6 81

40.5 33.5 5 40 76 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C113

Flange surface

Flange surface

Round Weight 3kg

LT -S15 CAD Data F2FU-15 F2FU-15 LT -S15W

F2FP-15 LT -S15 F2FP-15 LT -S15W

C112

Model Code P.C96

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 15W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

48.5

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

12.5

20

6.8

32.5

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Standard Motors

Power source inlet Fig-2

Cautions for Safety

Option

Output shaft

Position when lotated 180 around the motor shaft

C113

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2F Concentric Solid Shaft1-Phase 25W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S25 25W S25W

100/100 200/200

50/60 50/60

15 15

0.6/0.6 0.4/0.4

7501350/10001650 8501350/10001650

8 E 2
Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 25W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1080 1080 1080

kgf 35 45 55 60 70 80 90 90 100 100 110 110 110 110

N m 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5

kgf m 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2FU

F2FP

50 100V 45 200V

P.C114 Fig.C-81 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C111.

Fig.C-81

F2FU-15 L -10240-S25 T F2FU-15 L -10240-S25W T


137 68.5 27 24

F2FP-15 L -10240-S25 T F2FP-15 L -10240-S25W T


205 100 68.5 27 24 39 32 17 61 54 300 11

15h6 81

40.5 33.5 5 40 76 33.5 40.5 81 4M8P1.25 Refer to the detailed diagram on P. C115

Flange surface

Flange surface

Round Weight 3kg

LT -S25 CAD Data F2FU-15 F2FU-15 LT -S25W

F2FP-15 LT -S25 F2FP-15 LT -S25W

C114

Model Code P.C96

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 25W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 15 output shaft inner diameter 15
4-M8P1.25

48.5

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

12.5

20

6.8

32.5

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Standard Motors

Power source inlet Fig-2

Cautions for Safety

Option

Output shaft

Position when lotated 180 around the motor shaft

C115

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2F Concentric Solid Shaft1-Phase 40W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S40 40W S40W

100/100 200/200

50/60 50/60

18 18

0.9/0.9 0.5/0.5

8001350/10501650 9001350/13001650

12 E 3
Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 40W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 980 980 1080 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 100 100 110 140 140 140

N m 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 33.3 40.2

kgf m 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 3.4 4.1

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2FU

F2FP

40 100V 200V

P.C116 Fig.C-82 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page C111.

Fig.C-82

F2FU-18 L -10240-S40 T F2FU-18 L -10240-S40W T


158 79 30 27

F2FP-18 L -10240-S40 T F2FP-18 L -10240-S40W T


221 114 79 30 27 44.5 35.5 20.5 69.5 60.5 300 11

48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C117 39 6 40 90

Flange surface

Flange surface

Round Weight 4kg

LT -S40 CAD Data F2FU-18 F2FU-18 LT -S40W

F2FP-18 LT -S40 F2FP-18 LT -S40W

C116

Model Code P.C96

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 40W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150 Torque Torque

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

410.5

13

25

8.6

38

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Standard Motors

Power source inlet Fig-2

Cautions for Safety

Option

Output shaft

Position when lotated 180 around the motor shaft

C117

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2F Concentric Solid Shaft1-Phase 60W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S60 60W S60W

100/100 200/200

50/60 50/60

18 18

1.0/1.7 0.8/0.9

7001350/8001650 7001350/8001650

20 E 5
Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 60W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200


1/240

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 343 441 539 588 686 784 882 882 1270 1270 1370 1370 1370 1370

kgf 35 45 55 60 70 80 90 90 130 130 140 140 140 140

N m 2.74 4.12 5.49 6.96 8.33 10.8 13.7 16.7 20.6 26.5 31.4 42.1 52.9 53.9

kgf m 0.28 0.42 0.56 0.71 0.85 1.1 1.4 1.7 2.1 2.7 3.2 4.3 5.4 5.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2FU

F2FP

150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60 100V 55 200V

P.C118 Fig.C-83 4kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C111.

Fig.C-83

F2FU-18 L -10240-S60 T F2FU-18 L -10240-S60W T


158 79 30 27

F2FP-18 L -10240-S60 T F2FP-18 L -10240-S60W T


246.5 114 79 30 27 44.5 35.5 20.5 69.5 60.5 300 4

48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C119 39 6 92

Flange surface

Flange surface

300

Round Weight 4kg

LT -S60 CAD Data F2FU-18 F2FU-18 LT -S60W

F2FP-18 LT -S60 F2FP-18 LT -S60W

C118

Model Code P.C96

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm Black Black

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 60W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

150 Torque Torque

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

410.5

13

25

8.6

38

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Standard Motors

Power source inlet Fig-2

Cautions for Safety

Option

Output shaft

Position when lotated 180 around the motor shaft

C119

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR Mini Series

Speed Control Gearmotor


F2-Type F2F Concentric Solid Shaft1-Phase 90W
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective system F Classification

S90 90W S90W

100/100 200/200

50/60 50/60

18 18

1.4/2.0 0.9/1.0

9501300/11501600 10001350/11501600

26 E 6.5
Totally Enclosed
forced fan attached

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

50Hz 1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 90W 18 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3

60Hz 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5

N 441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370

kgf 45 60 75 90 100 110 120 120 130 130 140 140 140 140

N m 4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9

kgf m 0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5

50rpm

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

F2FU

F2FP

40

P.C120 Fig.C-84 4.0kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page C111.

Fig.C-84

F2FU-18 L -10240-S90 T F2FU-18 L -10240-S90W T


158 79 30 27

F2FP-18 L -10240-S90 T F2FP-18 L -10240-S90W T


246.5 114 79 30 27 44.5 35.5 20.5 69.5 60.5 300 4

48 18h6 18h6 96 39 48 96 4M10P1.5 Refer to the detailed diagram on P. C121 39 6 92

Flange surface

Flange surface

300

Round Weight 4.5kg

LT -S90 CAD Data F2FU-18 F2FU-18 LT -S90W

F2FP-18 LT -S90 F2FP-18 LT -S90W

C120

Model Code P.C96

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 90W motor is totally enclosed fan-cooled.

U-Type

Lead wire with connector 300mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white) Lead wire for fan 400mm Black Black

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Torque-Rotation Speed Characteristic Graph


1-Phase 90W 100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

200V
50Hz 60Hz

150

150

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Detailed diagram of the tap hole for face mount (Standard Specification)
Frame number 18 output shaft inner diameter 18
4-M10P1.5

410.5

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P.E54.

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

13

25

8.6

38

Figure viewed from motor-side


Fig-1

In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Standard Motors

Power source inlet Fig-2

Cautions for Safety

Option

Output shaft

Position when lotated 180 around the motor shaft

C121

Parallel Shaft

Gearmotor

GTR-L Series Gearmotor


Model and Type Designation Standard Model Lineup

GTR-L
Series

G
Type
Parallel Shaft

Gearmotor/Gearmotor with Brake/Reversible Gearmotor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Speed Control Gearmotor/Speed Control Gearmotor with Brake Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram P. D33 P. D37 P. D5 P. D9 P. D19

D1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR-L Series

Model and Type Designation


Type
Frame Number Shaft Arrangement Reduction Ratio Motor Capacity

L SeriesParallel Shaft

GTR-L Series gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

L F F

G G G

N N

10 15 15

M M B

L F G N

3 240 360

: Foot Mount : Flange Mount : Parallel Shaft

S06 T25 W C S40


T6

Classification by Mount Form Series Name

Blank : With Motor : With Brake Motor : Reversible 1-phase only : With Speed Control Gearmotor : With Speed Control Gearmotor U-Type With Controller P-Type Controller Sells Separately Classification by Motor Type R U P PN Frame No. and Diameter of Output shaft Bearing type Reduction Ratio M B T15 T25 T40 Motor Designation and Capacity S06 S10 S15 S25 S40

: With Speed control brake motors P-Type Controller Sells Separately : Metal type : Bearing type : 3-phase 15W : 3-phase 25W : 3-phase 40W : 1-phase 6W : 1-phase 10W : 1-phase 15W : 1-phase 25W : 1-phase 40W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz

Output Shaft Diameter

3 : 13 360 : 1360

Blank : Standard Specifications

Option
Note 1: For the types stated below, manufacturing with double voltage is not feasible. Single-phase 6W Note 2: Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

: High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase 200V50Hz 200V60Hz except for 6W : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor Terminal box for Speed Control type motor

T K C

Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X : Mark for Additional Specs.

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

D2

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

D3

Model and Type Designation

D4

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake Reversible gearmotor


1-Phase only

GTR-L
Series

Model and Type Designation Standard Model Lineup

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part


Insulation Classification

3-Phase
15W40W 3 Rated Power Source 200V 50/60Hz, 220V/60Hz Class E Direct start Totally Enclosed 4 Continuous Rating Spur gear and Helical gear Grease Lubrication

1-Phase
6W40W 100V 50/60Hz Class E Capacitor Start

Starting Method
Protective cooling Method

Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft
Output Shaft Material

New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85% max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Case Material
Ambient Temperature

Ambient Humidity Ambient Conditions Altitude Environment


Installation Location

Painting

Painting Method Painting Color

Mounting Direction

D5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR-L Series

Model and Type Designation


Type
Frame Number Shaft Arrangement Reduction Ratio Motor Capacity

L SeriesParallel Shaft

GTR-L Series Gearmotor/Brake Motor/Reversible Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

L F F

G G G

N R

10 15 15

M M B

L F G N R

3 240 360

: Foot Mount : Flange Mount : Parallel Shaft

S06 T25 W C S40


T6

Classification by Mount Form Series Name Classification by Motor Type Frame No. and Diameter of Output shaft Bearing type Reduction Ratio

Blank : With Motor : With Brake Motor : Reversible 1-phase only : Metal type : Bearing type : 3-phase 15W : 3-phase 25W : 3-phase 40W : 1-phase 6W : 1-phase 10W : 1-phase 15W : 1-phase 25W : 1-phase 40W 3-phase 200V50Hz 200V60Hz 220V60Hz 1-phase 100V50Hz 100V60Hz W Option
Note: 1-ph

Output Shaft Diameter M B T15 T25 T40 S06 S10 S15 S25 S40

3 : 13 360 : 1360

Motor Designation and Capacity

Blank : Standard Specifications

6W type is not available for high voltage.

: High Voltage 3-phase 380V50Hz 400V50Hz 400V60Hz 440V60Hz 1-phase 200V50Hz 200V60Hz except for 6W : T-Type Terminal Box : K-Type Terminal Box : Rectifier built-in terminal box for brake motor : Mark for Additional Specs.

T K C Auxiliary Mark Spec. Designation


Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

D6

Model and Type Designation

Standard Model Lineup


Foot Mount type Flange Mount type

Type

4P Motor Capacity

Frame Number

Reduction Ratio

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 6W

10

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50
Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120 1/160 1/200

1-Phase 10W Gearmotor LGFG Gearmotor with Brake LGN FGN


Note 1

10

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120 1/160 1/200

3-Phase 15W 12 1-Phase 15W

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120 1/160 1/200 1/240 1/300 1/360

Reversible Gearmotor LGR FGR

3-Phase 25W 1-Phase 25W 3-Phase 40W

12 15

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120

With Waterresistant Brake Motor Speed Control Gearmotor

1/160 1/200 1/240 1/300 1/360

15 1-Phase 40W

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120 1/160 1/200 1/240 1/300 1/360

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Note 1) Reversible motors are available only in single-phase. 2) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Standard Motors

Cautions for Safety

Option

D7

D8

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake


Performance Table Dimension diagram

GTR-L
Series

G
Type
Parallel Shaft

3-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

D9

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft3-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T15 15W T15W

200/200/220 380/400/400/440

50/60/60 50/50/60/60

12 12

0.14/0.13/0.13 0.11/0.12/0.10/0.11

1350/1550/1600 E 1400/1400/1700/1700
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.20 0.29 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 14.7 14.7

kgf m 0.02 0.03 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.5 1.5

N 98 196 294 343 392 441 490 490 490 490 490 490 490 490 490 490 490 490

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 50 50 50 50 50

LG

FG

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240


1/300 1/360

P.D11 Fig.D-1 2kg

P.D11 Fig.D-2 2kg

P.D11 Fig.D-3 2kg

P.D11 Fig.D-4 2kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D10

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor


Fig.D-1
LG-12M-3360-T15 B LG-12M-3360-T15W B

Flange Mount Type Gearmotor


Fig.D-2
FG-12M-3360-T15 B FG-12M-3360-T15W B

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

153 300

22 20
12h7

153 300

22 20
12h7

35 21 4 77 13.5 43

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

76.5

11

4 82.5 13.5 7 55

76.5

11

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2kg

LG-12M-T15 CAD Data LG-12M-T15W

Round Weight 2kg

FG-12M-T15 CAD Data FG-12M-T15W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-3
LGN-12M-3360-T15 B LGN-12M-3360-T15W B

Flange Mount Type Gearmotor with Brake


Fig.D-4
FGN-12M-3360-T15 B FGN-12M-3360-T15W B

188 300 300

22 20
12h7

188 300 300

22 20
12h7

35 21 4 77 13.5 43

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76.5

11

4 82.5 13.5 7 55 76.5

11

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2kg

CAD Data LGN-12M-T15 LGN-12M-T15W

Round Weight 2kg

FGN-12M-T15 CAD Data FGN-12M-T15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D11

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft3-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T25 25W T25W

200/200/220 380/400/400/440

50/60/60 50/50/60/60

12 15 12 15

0.21/0.19/0.19 0.18/0.17/0.17 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09

1350/1550/1600 1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 E


Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.29 0.59 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 26.5 26.5

kgf m 0.03 0.06 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.7 2.7

N 98 196 294 343 392 441 490 490 490 490 490 490 490 686 686 686 686 686

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 70 70 70 70 70

LG

FG

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 12 1/ 30 1/ 40 3-phase 25W 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 15 1/240


1/300 1/360

P.D13 Fig.D-5 2kg

P.D13 Fig.D-7 2kg

P.D14 Fig.D-9 2.5kg

P.D14 Fig.D-11 2.5kg

P.D13 Fig.D-6 2.5kg

P.D13 Fig.D-8 2.5kg

P.D14 Fig.D-10 3kg

P.D14 Fig.D-12 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D12

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR-L Series

Gearmotor
G-Type Parallel Shaft3-Phase 25W
Foot Mount Type Gearmotor
Fig.D-5
LG-12M-3120-T25 B LG-12M-3120-T25W B
Foot Mount type Flange Mount type

Fig.D-6

LG-15M-160360-T25 B LG-15M-160360-T25W B

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

153 300

22 20
12h7

161 300

25 22
15h7

Speed Control Gearmotor

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2kg

CAD Data LG-12M-T25 LG-12M-T25W

Round Weight 2.5kg

CAD Data LG-15M-T25 LG-15M-T25W

Gearmotor with Brake

Flange Mount Type Gearmotor


Fig.D-7
FG-12M-3120-T25 B FG-12M-3120-T25W B

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Fig.D-8

FG-15M-160360-T25 B FG-15M-160360-T25W B

153 300

22 20
12h7

161 300 35 21 4 77 13.5 43 9 90.5 13

25 22
15h7

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

76.5

11

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2kg

FG-12M-T25 CAD Data FG-12M-T25W

Round Weight 2.5kg

FG-15M-T25 CAD Data FG-15M-T25W

Speed Control Gearmotor with Brake Technical Information

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D13

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR-L Series

Gearmotor with Brake


G-Type Parallel Shaft3-Phase 25W
Foot Mount Type Gearmotor with Brake
Fig.D-9
LGN-12M-3120-T25 B LGN-12M-3120-T25W B
Foot Mount type Flange Mount type

Fig.D-10

LGN-15M-160360-T25 B LGN-15M-160360-T25W B

188 300 300

22 20
12h7

196 300 300

25 22
15h7

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2.5kg

LGN-12M-T25 CAD Data LGN-12M-T25W

Round Weight 3kg

LGN-15M-T25 CAD Data LGN-15M-T25W

Flange Mount Type Gearmotor with Brake


Fig.D-11
FGN-12M-3120-T25 B FGN-12M-3120-T25W B

Fig.D-12

FGN-15M-160360-T25 B FGN-15M-160360-T25W B

188 300 300

22 20
12h7

196 300 35 21 4 77 13.5 43 9 90.5 13 300

25 22
15h7

40 25 91 17 51

76.5

11

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2.5kg

FGN-12M-T25 CAD Data FGN-12M-T25W

Round Weight 3kg

FGN-15M-T25 CAD Data FGN-15M-T25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

D14

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

D15

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft3-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame No. Rated Current A Rated Rotation Speed rpm Insulation Protective Classification system

T40 40W T40W

200/200/220

50/60/60

15 15

0.27/0.26/0.26 0.13/0.14/0.13/0.14

1350/1550/1550 E
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

380/400/400/440 50/50/60/60

1300/1350/1550/1600

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.49 0.88 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 26.5 26.5 26.5 26.5

kgf m 0.05 0.09 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 2.7 2.7 2.7 2.7

N 147 294 343 441 490 539 637 686 686 686 686 686 686 686 686 686 686 686

kgf 15 30 35 45 50 55 65 70 70 70 70 70 70 70 70 70 70 70

LG

FG

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 3-phase 40W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160


1/200 1/240 1/300 1/360

P.D17 Fig.D-13 3kg

P.D17 Fig.D-14 3kg

P.D17 Fig.D-15 3kg

P.D17 Fig.D-16 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D16

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor


Fig.D-13
LG-15M-3360-T40 B LG-15M-3360-T40W B

Flange Mount Type Gearmotor


Fig.D-14
FG-15M-3360-T40 B FG-15M-3360-T40W B

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

161 300

161 25 22
15h7

300

25 22
15h7

40 25 91 17 51

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

90.5

13

5 17 8 97.5 65

90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Round Weight 3kg

LG-15M-T40 CAD Data LG-15M-T40W

Round Weight 3kg

FG-15M-T40 CAD Data FG-15M-T40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-15
LGN-15M-3360-T40 B LGN-15M-3360-T40W B

Flange Mount Type Gearmotor with Brake


Fig.D-16
FGN-15M-3360-T40 B FGN-15M-3360-T40W B

196 300 300

196 25 22
15h7

300 300

25 22
15h7

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

90.5

13

5 17 8 97.5 65

90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Round Weight 3kg

LGN-15M-T40 CAD Data LGN-15M-T40W

Round Weight 3kg

CAD Data FGN-15M-T40 FGN-15M-T40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D17

D18

Parallel Shaft

Gearmotor

Gearmotor Gearmotor with Brake Reversible gearmotor


Performance Table Dimension diagram

GTR-L
Series

G
Type
Parallel Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

D19

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GearmotorReversible gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft1-Phase 6W


Gearmotor/Gearmotor with Brake
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

6W

S06

100/100

50/60

10

0.17/0.17

1300/1600

2.5

Totally Enclosed

Reversible gearmotor
Motor Specs. Standard Voltage 4 pole, 30min, rating Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

6W

S06

100/100

50/60

10

0.20/0.25

1300/1600

3.5

Totally Enclosed

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Reversible gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9

N m 0.078 0.098 0.294 0.392 0.490 0.686 0.784 1.08 1.27 1.57 1.96 2.55 3.04 4.02 5.00

kgf m 0.008 0.01 0.03 0.04 0.05 0.07 0.08 0.11 0.13 0.16 0.20 0.26 0.31 0.41 0.51

N 59 78 137 206 245 274 314 343 343 343 343 343 343 343 343

kgf 6 8 14 21 25 28 32 35 35 35 35 35 35 35 35

LG LGR

FG LGR

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 6W 10 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200

P.D21 Fig.D-17 1.5kg

P.D21 Fig.D-18 1.5kg

P.D21 Fig.D-19 1.5kg

P.D21 Fig.D-20 1.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

D20

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor/Reversible gearmotor


Fig.D-17
LG M-3200-S06 -10 B LGR-10M-3200-S06 B

Flange Mount Type Gearmotor/Reversible gearmotor


Fig.D-18
FG M-3200-S06 -10B FGR-10M-3200-S06 B

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

136 300

20 18
10h7

136 300

20 18
10h7

26

Speed Control Gearmotor

61.5

9 6 30 42 30

4 67 11.5 62 75 45

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-5.5

Round Weight 1.5kg

LG-10M-S06 CAD Data LGR-10M-S06

Round Weight 1.5kg

FG-10M-S06 CAD Data FGR-10M-S06

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-19
LGN-10M-3200-S06 B

Flange Mount Type Gearmotor with Brake


Fig.D-20
FGN-10M-3200-S06 B

300

171 300

20 18
10h7

171 300 300

20 18
10h7

26

With Waterresistant Brake Motor Speed Control Gearmotor

61.5

9 6 30 42 30

4 67 11.5 62 75 45

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

4-5.5

Round Weight 1.5kg

CAD Data LGN-10M-S06

Round Weight 1.5kg

CAD Data FGN-10M-S06

Technical Information

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D21

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GearmotorReversible gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft1-Phase 10W


Gearmotor/Gearmotor with Brake
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S10 10W S10W

100/100 200/200

50/60 50/60

10 10

0.30/0.30 0.17/0.17

1300/1550 1300/1600

3.5 E 1
Totally Enclosed

Reversible gearmotor
Motor Specs. Standard Voltage 4 pole, 30min, rating Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S10 10W S10W

100/100 200/200

50/60 50/60

10 10

0.29/0.29 0.17/0.16

1300/1600 1300/1600

4.5 E 1.2
Totally Enclosed

Double Voltage 4 pole, 30min, rating

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Reversible gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9

N m 0.10 0.20 0.39 0.69 0.88 1.08 1.27 1.76 2.16 2.65 3.33 4.21 5.00 6.66 7.84

kgf m 0.01 0.02 0.04 0.07 0.09 0.11 0.13 0.18 0.22 0.27 0.34 0.43 0.51 0.68 0.8

N 59 78 137 206 245 274 314 343 343 343 343 343 343 343 343

kgf 6 8 14 21 25 28 32 35 35 35 35 35 35 35 35

LG LGR

FG LGR

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 10W 10 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200

P.D23 Fig.D-21 1.5kg

P.D23 Fig.D-22 1.5kg

P.D23 Fig.D-23 1.5kg

P.D23 Fig.D-24 1.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

D22

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor/Reversible gearmotor


Fig.D-21
LG M-3200-S10 -10 B LG M-3200-S10W -10 B LGR-10M-3200-S10 B LGR-10M-3200-S10W B
136 300 20 18
10h7

Flange Mount Type Gearmotor/Reversible gearmotor


Fig.D-22
FG M-3200-S10 -10 B FG M-3200-S10W -10 B FGR-10M-3200-S10 B FGR-10M-3200-S10W B
136 300 20 18
10h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

26

61.5

9 6 30 42 30

4 67 11.5 62 75 45 61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-5.5

Round Weight 1.5kg

LG-10M-S10 CAD Data LG-10M-S10W LGR-10M-S10 LGR-10M-S10W

Round Weight 1.5kg

FG-10M-S10 CAD Data FG-10M-S10W FGR-10M-S10 FGR-10M-S10W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-23
LGN-10M-3200-S10 B LGN-10M-3200-S10W B

Flange Mount Type Gearmotor with Brake


Fig.D-24
FGN-10M-3200-S10 B FGN-10M-3200-S10W B

300

171 300

20 18
10h7

171 300 300

20 18
10h7

26

With Waterresistant Brake Motor

61.5

9 6 30 42 30

4 67 11.5 62 75 45

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4-5.5

Round Weight 1.5kg

CAD Data LGN-10M-S10 LGN-10M-S10W

Round Weight 1.5kg

CAD Data FGN-10M-S10 FGN-10M-S10W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D23

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GearmotorReversible gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft1-Phase 15W


Gearmotor/Gearmotor with Brake
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

12 12

0.39/0.35 0.21/0.19

1350/1650 1350/1650

5 E 1.2
Totally Enclosed

Reversible gearmotor
Motor Specs. Standard Voltage 4 pole, 30min, rating Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S15 15W S15W

100/100 200/200

50/60 50/60

12 12

0.35/0.40 0.20/0.20

1400/1700 1400/1700

6 E 1.5
Totally Enclosed

Double Voltage 4 pole, 30min, rating

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Reversible gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.20 0.29 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 14.7 14.7

kgf m 0.02 0.03 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.5 1.5

N 98 196 294 343 392 441 490 490 490 490 490 490 490 490 490 490 490 490

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 50 50 50 50 50

LG LGR

FG LGR

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 15W 12 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240


1/300 1/360

P.D25 Fig.D-25 2kg

P.D25 Fig.D-26 2kg

P.D25 Fig.D-27 2kg

P.D25 Fig.D-28 2kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D24

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor/Reversible gearmotor


Fig.D-25
LG M-3360-S15 -12 B LG M-3360-S15W -12 B LGR-12M-3360-S15 B LGR-12M-3360-S15W B
153 300 22 20
12h7

Flange Mount Type Gearmotor/Reversible gearmotor


Fig.D-26
FG M-3360-S15 -12B FG M-3360-S15W -12B FGR-12M-3360-S15 B FGR-12M-3360-S15W B
153 300 22 20
12h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

35 21 4 77 13.5 43

76.5

11

4 82.5 13.5 7 55 76.5

11

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2kg

LG-12M-S15 CAD Data LG-12M-S15W LGR-12M-S15 LGR-12M-S15W

Round Weight 2kg

FG-12M-S15 CAD Data FG-12M-S15W FGR-12M-S15 FGR-12M-S15W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-27
LGN-12M-3360-S15 B LGN-12M-3360-S15W B

Flange Mount Type Gearmotor with Brake


Fig.D-28
FGN-12M-3360-S15 B FGN-12M-3360-S15W B

188 300 300

22 20
12h7

188 300 300

22 20
12h7

35 21 4 77 13.5 43

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76.5

11

4 82.5 13.5 7 55

76.5

11

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2kg

LGN-12M-S15 CAD Data LGN-12M-S15W

Round Weight 2kg

FGN-12M-S15 CAD Data FGN-12M-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D25

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GearmotorReversible gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft1-Phase 25W


Gearmotor/Gearmotor with Brake
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S25 25W S25W

100/100 200/200

50/60 50/60

12 15 12 15

0.48/0.48 0.44/0.45 0.26/0.25 0.23/0.24

1350/1600 1350/1650 1350/1600 1350/1650

7 7 1.7 1.7 E
Totally Enclosed

Reversible gearmotor
Motor Specs. Standard Voltage 4 pole, 30min, rating Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S25 25W S25W

100/100 200/200

50/60 50/60

12 15 12 15

0.55/0.65 0.50/0.65 0.26/0.33 0.26/0.35

1400/1650 1400/1650 1400/1650 1400/1650

10 10 2.5 2.5 E
Totally Enclosed

Double Voltage 4 pole, 30min, rating

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Reversible gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.29 0.59 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 26.5 26.5

kgf m 0.03 0.06 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.7 2.7

N 98 196 294 343 392 441 490 490 490 490 490 490 490 686 686 686 686 686

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 70 70 70 70 70

LG LGR

FG LGR

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 12 1-phase 25W 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200 15 1/240


1/300 1/360

P.D27 Fig.D-29 2kg

P.D27 Fig.D-31 2kg

P.D28 Fig.D-33 2.5kg

P.D28 Fig.D-35 2.5kg

P.D27 Fig.D-30 2.5kg

P.D27 Fig.D-32 2.5kg

P.D28 Fig.D-34 3kg

P.D28 Fig.D-36 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D26

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

GTR-L Series

GearmotorReversible gearmotor
G-Type Parallel Shaft1-Phase 25W
Foot Mount Type Gearmotor/Reversible gearmotor
Fig.D-29
LG M-3120-S25 -12 B LG M-3120-S25W -12 B LGR-12M-3120-S25 B LGR-12M-3120-S25W B
153 300 22 20
12h7

Foot Mount type

Flange Mount type

Fig.D-30

LG M-160360-S25 -15B LG M-160360-S25W -15B LGR-15M-160360-S25 B LGR-15M-160360-S25W B


161 300 25 22
15h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2kg

LG-12M-S25 CAD Data LG-12M-S25W LGR-12M-S25 LGR-12M-S25W

Round Weight 2.5kg

LG-15M-S25 LG-15M-S25W CAD Data LGR-15M-S25 LGR-15M-S25W

Flange Mount Type Gearmotor/Reversible gearmotor


Fig.D-31
FG M-3120-S25 -12B FG M-3120-S25W -12B FGR-12M-3120-S25 B FGR-12M-3120-S25W B
153 300 22 20
12h7

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Fig.D-32

FG M-160360-S25 -15B FG M-160360-S25W -15B FGR-15M-160360-S25 B FGR-15M-160360-S25W B


161 300 25 22
15h7

35 21 4 77 13.5 43 9 90.5 13

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76.5

11

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2kg

FG-12M-S25 CAD Data FG-12M-S25W FGR-12M-S25 FGR-12M-S25W

Round Weight 2.5kg

FG-15M-S25 FG-15M-S25W CAD Data FGR-15M-S25 FGR-15M-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GTR-L Series

Gearmotor with Brake


G-Type Parallel Shaft1-Phase 25W
Foot Mount Type Gearmotor
Fig.D-33
LGN-12M-3120-S25 B LGN-12M-3120-S25W B
Foot Mount type Flange Mount type

Fig.D-34

LGN-15M-160360-S25 B LGN-15M-160360-S25W B

188 300 300

22 20
12h7

196 300 300

25 22
15h7

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2.5kg

LGN-12M-S25 CAD Data LGN-12M-S25W

Round Weight 3kg

LGN-15M-S25 CAD Data LGN-15M-S25W

Flange Mount Type Gearmotor


Fig.D-35
FGN-12M-3120-S25 B FGN-12M-3120-S25W B

Fig.D-36

FGN-15M-160360-S25 B FGN-15M-160360-S25W B

188 300 300

22 20
12h7

196 300 35 21 4 77 13.5 43 9 90.5 13 300

25 22
15h7

40 25 91 17 51

76.5

11

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2.5kg

FGN-12M-S25 CAD Data FGN-12M-S25W

Round Weight 3kg

FGN-15M-S25 CAD Data FGN-15M-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

D28

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

D29

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

GearmotorReversible gearmotor Gearmotor with Brake


GTR-L Series

G-Type Parallel Shaft1-Phase 40W


Gearmotor/Gearmotor with Brake
Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Double Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S40 40W S40W

100/100 200/200

50/60 50/60

15 15

0.61/0.66 0.29/0.34

1350/1650 1350/1600

10 E 2.5
Totally Enclosed

Reversible gearmotor
Motor Specs. Standard Voltage 4 pole, 30min, rating Capacity Motor Capacity Designation Voltage V Frequency Hz Frame Rated Current No. A Rated Rotation Speed Capacitor Insulation Protective F Classification system rpm

S40 40W S40W

100/100 200/200

50/60 50/60

15 15

0.75/0.88 0.37/0.41

1400/1650 1400/1650

14 E 3.5
Totally Enclosed

Double Voltage 4 pole, 30min, rating

Motor Capacity

Frame No.

Reduction Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor Reversible gearmotor Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N m 0.49 0.88 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 26.5 26.5 26.5 26.5

kgf m 0.05 0.09 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 2.7 2.7 2.7 2.7

N 147 294 343 441 490 539 637 686 686 686 686 686 686 686 686 686 686 686

kgf 15 30 35 45 50 55 65 70 70 70 70 70 70 70 70 70 70 70

LG LGR

FG LGR

LGN

FGN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1-phase 40W 15 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160


1/200 1/240 1/300 1/360

P.D31 Fig.D-37 2.5kg

P.D31 Fig.D-38 2.5kg

P.D31 Fig.D-39 3kg

P.D31 Fig.D-40 3kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

D30

Model Code P.D6

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Gearmotor/Reversible gearmotor


Fig.D-37
LG M-3360-S40 -15 B LG M-3360-S40W -15 B LGR-15M-3360-S40 B LGR-15M-3360-S40W B
161 300 25 22
15h7

Flange Mount Type Gearmotor/Reversible gearmotor


Fig.D-38
FG M-3360-S40 -15 B FG M-3360-S40W -15 B FGR-15M-3360-S40 B FGR-15M-3360-S40W B
161 300 25 22
15h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

40 25 91 17 51

90.5

13

5 17 8 97.5 65 90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Round Weight 2.5kg

LG-15M-S40 LG-15M-S40W CAD Data LGR-15M-S40 LGR-15M-S40W

Round Weight 2.5kg

FG-15M-S40 CAD Data FG-15M-S40W FGR-15M-S40 FGR-15M-S40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Gearmotor with Brake


Fig.D-39
LGN-15M-3360-S40 B LGN-15M-3360-S40W B

Flange Mount Type Gearmotor with Brake


Fig.D-40
FGN-15M-3360-S40 B FGN-15M-3360-S40W B

196 300 300

196 25 22
15h7

300 300

25 22
15h7

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

90.5

13

5 17 8 97.5 65

90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Round Weight 3kg

CAD Data LGN-15M-S40 LGN-15M-S40W

Round Weight 3kg

CAD Data FGN-15M-S40 FGN-15M-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

Option

D31

D32

Parallel Shaft

Gearmotor

Speed control Gearmotor Speed control Gearmotor with Brake


Model and Type Designation Standard Model Lineup

GTR-L
Series

G
Type
Parallel Shaft

Number of phase Capacity Power Source Motor Part Insulation Classification Starting Method Protective cooling Method Number of Pole Rating Reduction Method Lubrication Speed Reduction Part Output Shaft Output Shaft Material Case Material Ambient Temperature Ambient Humidity Ambient Conditions Altitude Environment Installation Location Painting Painting Method Painting Color Mounting Direction

1-Phase
6W40W 100V 50/60Hz Class E Capacitor Start Totally Enclosed 4 Continuous Rating Spur gear and Helical gear Grease Lubrication New JIS Key(JIS 1301-1976 class) S43C Aluminium die-cast 1040 85max.(without any dew condensation) 1,000m max. Well ventilated place free from corrosive gas, explosive gas vapor and/or dust. Indoors Anion painting, Acrylic paint Grey(Mansel code: 9B6/0.5) No restriction in the mounting angle.(horizontally, vertically or heeling angle)

D33

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Model and Type Designation


Standard Motors Cautions for Safety Option

GTR-L Series

Model and Type Designation


Type
Frame Number Shaft Arrangement Reduction Ratio Motor Capacity

L SeriesParallel Shaft

GTR-L Series Speed control Gearmotor/Speed control Gearmotor with Brake are lassified by codes as shown below. Specify these codes in your inquiry and order.
Option
Auxiliary Mark Spec. Designation

L F F

G U G N G PN

10 15 15

M M B

L F G U P PN

3 240 360

: Foot Mount : Flange Mount : Parallel Shaft

S06 S25 W C S40


T6

Classification by Mount Form Series Name

Blank : With Motor Classification by Motor Type Frame No. and Diameter of Output shaft Bearing type Reduction Ratio : With Speed control Gearmotor : With Speed control Gearmotor U-Type With Controller P-Type Controller Sells Separately

: With Speed control Gearmotor with Brake P-Type Controller Sells Separately : Metal type : Bearing type : 1-phase 6W : 1-phase 10W : 1-phase 15W : 1-phase 25W : 1-phase 40W

Output Shaft Diameter M B S06 S10

3 : 13 360 : 1360

Motor Designation and Capacity

S15 S25 S40

Blank : Standard Specifications 1-phase 100V50Hz 100V60Hz Option W C Auxiliary Mark Spec. Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

: High Voltage 1-phase 200V50Hz 200V60Hz except for 6W : P-Type Terminal Box : Mark for Additional Specs.

Blank : Standard Specs. X

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

Controller
Type Designation
GTR-L Series controllers are classified by codes as shown below. These codes are required for your inquiry and/or order.
Type
Voltage Function Motor Type

SC P

10 1

Blank : U-Type L : P-Type Function


0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running

Voltage

10 single-phase 100V 20 single-phase 200V

D34

U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors) SC: Speed Controller (generic name)

Model and Type Designation

Standard Model Lineup


U-Type P-Type Controller Sells Separately

Type

4P Motor Capacity

Frame Number

Reduction Ratio

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

1-Phase 6W

10

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50
Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120 1/160 1/200

1-Phase 10W

10

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120 1/160 1/200

Speed control Gearmotor LGU FGU LGP FGP Speed control Gearmotor with Brake LGPN FGPN

1-Phase 15W

12

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120 1/160 1/200 1/240 1/300 1/360

12 1-Phase 25W 15

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

1/100 1/120

With Waterresistant Brake Motor Speed Control Gearmotor

1/160 1/200 1/240 1/300 1/360

1-Phase 40W

15

1/3 1/60

1/5 1/80

1/10

1/15

1/20

1/25

1/30

1/40

1/50

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1/100 1/120 1/160 1/200 1/240 1/300 1/360

With Waterresistant Brake Motor

Note 1) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

D35

D36

Parallel Shaft

Gearmotor

Speed control Gearmotor Speed control Gearmotor with Brake


Performance Table Dimension diagram

GTR-L
Series

G
Type
Parallel Shaft

1-Phase
Remarks

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N m{kgf m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

D37

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 6W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

6W

S06

100/100

50/60

10

0.25/0.25

5001300/501600

2.5

Totally Enclosed

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9

N 59 78 137 206 245 274 314 343 343 343 343 343 343 343 343

kgf 6 8 14 21 25 28 32 35 35 35 35 35 35 35 35

N m 0.078 0.098 0.294 0.392 0.490 0.686 0.784 1.08 1.27 1.57 1.96 2.55 3.04 4.02 5.0

kgf m 0.008 0.01 0.03 0.04 0.05 0.07 0.08 0.11 0.13 0.16 0.20 0.26 0.31 0.41 0.51

Gearmotor 50rpm LGU LGP FGU FGP

LGPN

FGPN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 6W 10 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200

100

P.D39 Fig.D-41 1.5kg

P.D39 Fig.D-42 1.5kg

P.D39 Fig.D-43 1.5kg

P.D39 Fig.D-44 1.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Torque-Rotation Speed Characteristic Graph


1-Phase 6W
100V
50Hz 60Hz 200

Note) 100% torque shows the allowable torque at high speed.

150

Torque

100

50

500 1000 1500 Rotation Speed rpm

D38

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor
Fig.D-41
LGU-10M-3200-S06 B LGP-10M-3200-S06 B

Fig.D-42

FGU-10M-3200-S06 B FGP-10M-3200-S06 B

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

146.8 300 300

20 18
10h7

146.8 300 300

20 18
10h7

26

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

61.5

9 6 30 42 30

4 11.5 62 75 45 67

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

4-5.5

Round Weight 1.5kg

LGU-10M-S06 CAD Data LGP-10M-S06

Round Weight 1.5kg

FGU-10M-S06 CAD Data FGP-10M-S06

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake
Fig.D-43
LGPN-10M-3200-S06 B

Fig.D-44

FGPN-10M-3200-S06 B

300

300

181.3 300

20 18
10h7

181.3 300 300 300

20 18
10h7

26

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

61.5

9 6 30 42 30

4 67 11.5 62 75 45

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

4-5.5

Round Weight 1.5kg

CAD Data LGPN-10M-S06

Round Weight 1.5kg

CAD Data FGPN-10M-S06

Technical Information

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Option

D39

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 10W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

S10 10W S10W

100/100 200/200

50/60 50/60

10 10

0.35/0.35 0.2/0.2

5001300/5001600 4501300/5001600

3.5 E 1
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9

N 59 78 137 206 245 274 314 343 343 343 343 343 343 343 343

kgf 6 8 14 21 25 28 32 35 35 35 35 35 35 35 35

N m 0.10 0.20 0.39 0.69 0.88 1.08 1.27 1.76 2.16 2.65 3.33 4.21 5.00 6.66 7.84

kgf m 0.01 0.02 0.04 0.07 0.09 0.11 0.13 0.18 0.22 0.27 0.34 0.43 0.51 0.68 0.8

Gearmotor 50rpm LGU LGP FGU FGP

LGPN

FGPN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1-phase 10W 10 1/ 40 1/ 50 1/ 60 1/ 80 1/100 1/120 1/160 1/200

70
100V 200V

P.D41 Fig.D-45 1.5kg

P.D41 Fig.D-46 1.5kg

P.D41 Fig.D-47 1.5kg

P.D41 Fig.D-48 1.5kg

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Torque-Rotation Speed Characteristic Graph


1-Phase 10W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

D40

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor
Fig.D-45
LGU-10M-3200-S10 B LGU-10M-3200-S10W B LGP-10M-3200-S10 B LGP-10M-3200-S10W B
146.8 300 300 20 18
10h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Fig.D-46

FGU-10M-3200-S10 B FGU-10M-3200-S10W B FGP-10M-3200-S10 B FGP-10M-3200-S10W B


146.8 300 20 18
10h7

300

26

61.5

9 6 30 42 30

4 11.5 62 75 45 67 61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

4-5.5

Round Weight 1.5kg

LGU-10M-S10 CAD Data LGU-10M-S10W LGP-10M-S10 LGP-10M-S10W

Round Weight 1.5kg

FGU-10M-S10 CAD Data FGU-10M-S10W FGP-10M-S10 FGP-10M-S10W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake
Fig.D-47
LGPN-10M-3200-S10 B LGPN-10M-3200-S10W B

Fig.D-48

FGPN-10M-3200-S10 B FGPN-10M-3200-S10W B

300

300

181.3 300

20 18
10h7

181.3 300 300 300

20 18
10h7

26

With Waterresistant Brake Motor

61.5

9 6 30 42 30

4 67 11.5 62 75 45

61.5

4 11.5 7 3.5 24 4-5.5 25 62 25

16 62 34

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4-5.5

Round Weight 1.5kg

CAD Data LGPN-10M-S10 LGPN-10M-S10W

Round Weight 1.5kg

CAD Data FGPN-10M-S10 FGPN-10M-S10W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Option

D41

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 15W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

50/60 15W 50/60

S15 S15W

100/100 200/200

12 12

0.6/0.6 0.3/0.3

5001350/5501650 6001400/7501700

6 E 1.5
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N 98 196 294 343 392 441 490 490 490 490 490 490 490 490 490 490 490 490

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 50 50 50 50 50

N m 0.20 0.29 0.69 0.98 1.27 1.67 1.96 2.65 3.33 3.92 5.00 6.27 7.45 9.80 12.7 14.7 14.7 14.7

kgf m 0.02 0.03 0.07 0.10 0.13 0.17 0.20 0.27 0.34 0.40 0.51 0.64 0.76 1.0 1.3 1.5 1.5 1.5

Gearmotor 50rpm LGU LGP FGU FGP

LGPN

FGPN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1-phase 15W 12 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240


1/300

70
100V

60
200V

P.D43 Fig.D-49 2kg

P.D43 Fig.D-50 2kg

P.D43 Fig.D-51 2.5kg

P.D43 Fig.D-52 2.5kg

90
100V

1/360

75
200V

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Torque-Rotation Speed Characteristic Graph


1-Phase 15W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

D42

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor
Fig.D-49
LGU-12M-3360-S15 B LGU-12M-3360-S15W B LGP-12M-3360-S15 B LGP-12M-3360-S15W B
163.8 300 300 22 20
12h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Fig.D-50

FGU-12M-3360-S15 B FGU-12M-3360-S15W B FGP-12M-3360-S15 B FGP-12M-3360-S15W B


163.8 300 22 20
12h7

300

35 21 4 77 13.5 43

76.5

11

4 82.5 13.5 7 55

76.5

11

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2kg

LGU-12M-S15 CAD Data LGU-12M-S15W LGP-12M-S15 LGP-12M-S15W

Round Weight 2kg

FGU-12M-S15 CAD Data FGU-12M-S15W FGP-12M-S15 FGP-12M-S15W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake
Fig.D-51
LGPN-12M-3360-S15 B LGPN-12M-3360-S15W B

Fig.D-52

FGPN-12M-3360-S15 B FGPN-12M-3360-S15W B
198.3

198.3 300 300 300

22 20
12h7

300

300

300

22 20
12h7

35 21 4 77 13.5 43

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76.5

11

4 82.5 13.5 7 55

76.5

11

35 50

33.5

4-6.5

76 90

3 26 4-6.5

32 77

32

Round Weight 2.5kg

CAD Data LGPN-12M-S15 LGPN-12M-S15W

Round Weight 2.5kg

CAD Data FGPN-12M-S15 FGPN-12M-S15W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Option

D43

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 25W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

S25 25W S25W

100/100 200/200

50/60 50/60

12 15 12 15

0.6/0.6 0.7/0.7 0.4/0.4 0.4/0.4

7501350/10001650 5501400/6501650 8501350/10001650 6001350/8001650

8 8 2 2 E
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N 98 196 294 343 392 441 490 490 490 490 490 490 490 686 686 686 686 686

kgf 10 20 30 35 40 45 50 50 50 50 50 50 50 70 70 70 70 70

N m 0.29 0.59 1.08 1.67 2.25 2.74 3.33 4.41 5.49 6.66 8.43 10.8 12.7 16.7 20.6 25.5 25.5 25.5

kgf m 0.03 0.06 0.11 0.17 0.23 0.28 0.34 0.45 0.56 0.68 0.86 1.1 1.3 1.7 2.1 2.6 2.7 2.7

Gearmotor 50rpm LGU LGP FGU FGP

LGPN

FGPN

1/ 10 1/ 15 1/ 20 1/ 25 12 1/ 30 1/ 40 1/ 50 1-phase 25W 1/ 60 1/ 80 1/100 1/120 1/160 1/200 1/240 15


1/300

50
100V

45
200V

P.D45 Fig.D-53 2kg

P.D45 Fig.D-55 2kg

P.D43 Fig.D-57 2.5kg

P.D43 Fig.D-59 2.5kg

60
100V 200V

75
100V 200V

P.D45 Fig.D-54 2.5kg

P.D45 Fig.D-56 2.5kg

P.D43 Fig.D-58 3kg

P.D43 Fig.D-60 3kg

1/360

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Torque-Rotation Speed Characteristic Graph


1-Phase 25W
Frame No.12/100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

Frame No.12/200V
50Hz 60Hz 200

Frame No.15/100V
50Hz 60Hz 200

Frame No.15/200V
50Hz 60Hz

150

150

150

150

Torque

Torque

Torque

Torque

100

100

100

100

50

50

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

D44

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Speed control gearmotor


Fig.D-53
LGU-12M-3120-S25 B LGU-12M-3120-S25W B LGP-12M-3120-S25 B LGP-12M-3120-S25W B
163.8 300 300 22 20
12h7

Parallel Shaft Performance Table/ Dimension

Fig.D-54

LGU-15M-160360-S25 B LGU-15M-160360-S25W B LGP-15M-160360-S25 B LGP-15M-160360-S25W B


171.8 300 25 22
15h7

Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

300

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2kg

LGU-12M-S25 CAD Data LGU-12M-S25W LGP-12M-S25 LGP-12M-S25W

Round Weight 2.5kg

LGU-15M-S25 CAD Data LGU-15M-S25W LGP-15M-S25 LGP-15M-S25W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Flange Mount Type Speed control gearmotor


Fig.D-55
FGU-12M-3120-S25 B FGU-12M-3120-S25W B FGP-12M-3120-S25 B FGP-12M-3120-S25W B
163.8 300 300 22 20
12h7

Fig.D-56

FGU-15M-160360-S25 B FGU-15M-160360-S25W B FGP-15M-160360-S25 B FGP-15M-160360-S25W B


171.8 300 25 22
15h7

35 21 4 77 13.5 43 90.5

300

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

76.5

11

13

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2kg

FGU-12M-S25 CAD Data FGU-12M-S25W FGP-12M-S25 FGP-12M-S25W

Round Weight 2.5kg

FGU-15M-S25 CAD Data FGU-15M-S25W FGP-15M-S25 FGP-15M-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Option

D45

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 25W


Foot Mount Type Speed control gearmotor with Brake
Fig.D-57
LGPN-12M-3120-S25 B LGPN-12M-3120-S25W B
Foot Mount type Flange Mount type

Fig.D-58

LGPN-15M-160360-S25 B LGPN-15M-160360-S25W B

198.3 300 300 300

22 20
12h7

206.3 300 300 300

25 22
15h7

76.5

11

4 82.5 13.5 7 55

90.5

13

5 17 8 97.5 65

35 50

33.5

4-6.5

76 90

40 56

37

4-6.5

90 104

Round Weight 2.5kg

CAD Data LGPN-12M-S25 LGPN-12M-S25W

Round Weight 3kg

CAD Data LGPN-15M-S25 LGPN-15M-S25W

Flange Mount Type Speed control gearmotor with Brake


Fig.D-59
FGPN-12M-3120-S25 B FGPN-12M-3120-S25W B

Fig.D-60

FGPN-15M-160360-S25 B FGPN-15M-160360-S25W B

198.3 300 300 300

22 20
12h7

206.3 300 35 21 4 77 13.5 43 9 90.5 13 300 300

25 22
15h7

40 25 91 17 51

76.5

11

3 26 4-6.5

32 77

32

3 29 4-6.5

38 91

38

Round Weight 2.5kg

CAD Data FGPN-12M-S25 FGPN-12M-S25W

Round Weight 3kg

CAD Data FGPN-15M-S25 FGPN-15M-S25W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

D46

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

D47

Performance Table/ Dimension


With Waterresistant Brake Motor Speed Control Gearmotor With Waterresistant Brake Motor Speed Control Gearmotor

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Performance Table/ Dimension


Standard Motors Cautions for Safety Option

Speed control gearmotors Speed control brake motors


GTR-L Series

G-Type Parallel Shaft1-Phase 40W


Motor Specs. Standard Voltage (Continuous Rated 4 Poles) Capacity Motor Capacity Designation Voltage V Frequency Hz Frame MAX Current No. A High speed rotation range rpm Capacitor Insulation Protective F Classification system

S40 40W S40W

100/100 200/200

50/60 50/60

15 15

0.9/0.9 0.5/0.5

8001350/10501650 9001350/13001650

12 E 3
Totally Enclosed

Double Voltage (Continuous Rated 4 Poles)

Motor Capacity

Frame Reduction No. Ratio

Output Shaft Rotation Speed rpm

Output Shaft Allowable O.H.L

Output Shaft Allowable Torque high speed

Page, Diagram No. of the Outer Dimension Diagram, Round Weight Gearmotor with Brake

50Hz 1/ 1/ 3 5 500 300 150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4.2

60Hz 600 360 180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 5

N 147 294 343 441 490 539 637 686 686 686 686 686 686 686 686 686 686 686

kgf 15 30 35 45 50 55 65 70 70 70 70 70 70 70 70 70 70 70

N m 0.49 0.88 1.76 2.65 3.53 4.41 5.29 7.06 8.82 10.8 13.7 16.7 20.6 26.5 26.5 26.5 26.5 26.5

kgf m 0.05 0.09 0.18 0.27 0.36 0.45 0.54 0.72 0.90 1.1 1.4 1.7 2.1 2.7 2.7 2.7 2.7 2.7

Gearmotor 50rpm LGU LGP FGU FGP

LGPN

FGPN

1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1-phase 40W 15 1/ 80 1/100 1/120 1/160


1/200

40
100V 200V

P.D49 Fig.D-61 3kg

P.D49 Fig.D-62 3kg

P.D49 Fig.D-63 3kg

P.D49 Fig.D-64 3kg

50
100V 200V

1/240

1/300

75
100V 200V

1/360

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Torque-Rotation Speed Characteristic Graph


1-Phase 40W
100V
50Hz 60Hz 200 200

Note) 100% torque shows the allowable torque at high speed.

200V
50Hz 60Hz

150

150

Torque

Torque

100

100

50

50

500 1000 1500 Rotation Speed rpm

500 1000 1500 Rotation Speed rpm

D48

Model Code P.D34

Lead-Wire/Terminal Box Position Mark

P.E54

Option P.E110E112

Performance Table/ Dimension

Foot Mount type

Flange Mount type

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor
Fig.D-61
LGU-15M-3360-S40 B LGU-15M-3360-S40W B LGP-15M-3360-S40 B LGP-15M-3360-S40W B
171.8 300 300 25 22
15h7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Fig.D-62

FGU-15M-3360-S40 B FGU-15M-3360-S40W B FGP-15M-3360-S40 B FGP-15M-3360-S40W B


171.8 300 25 22
15h7

300

40 25 91 17 51

90.5

13

5 17 8 97.5 65

90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Round Weight 3kg

LGU-15M-S40 CAD Data LGU-15M-S40W LGP-15M-S40 LGP-15M-S40W

Round Weight 3kg

FGU-15M-S40 CAD Data FGU-15M-S40W FGP-15M-S40 FGP-15M-S40W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake
Fig.D-63
LGPN-15M-3360-S40 B LGPN-15M-3360-S40W B

Fig.D-64

FGPN-15M-3360-S40 B FGPN-15M-3360-S40W B

206.3 300 300 300

25 22
15h7

206.3 300 300 300

25 22
15h7

40 25 91 17 51

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

90.5

13

5 17 8 97.5 65 90.5

13

40 56

37

4-6.5

90 104

3 29 4-6.5

38 91

38

Round Weight 3kg

CAD Data LGPN-15M-S40 LGPN-15M-S40W

Round Weight 3kg

CAD Data FGPN-15M-S40 FGPN-15M-S40W

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Standard Motors

Cautions for Safety

As for motor-type:
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type

Lead wire with connector 150mm

P-Type

Motor lead wire 300mm Lead wire for generator 300mm (white white)

Option

D49

Gearmotor

Technical Information

C O N TE N TS
Selection Braking time and lifetime frequency of Gearmotor with Brake and with Clutch/Brake Construction Drawings How to read the nameplate Motor characteristics Inertia moment (product itself) Gearmotor Indoor Specification Gearmotor with Brake (Indoor) Terminal Box Speed Control Gearmotor Speed Control Gearmotor with brake GTR-L Series only Speed Control Gearmotor Controller Gearmotor with Clutch/Brake Combination of Gearmotor and Inverter Lead Wire Specifications Detailed Dimension Diagram of Output Shaft Attachment of Hollow Shaft Type Standard Motor Caution for Safe Operation Option P. E2 P. E10 P. E12 P. E13 P. E14 P. E26 P. E30 P. E34 P. E50 P. E56 P. E57 P. E60 P. E74 P. E76 P. E77 P. E78 P. E80 P. E88 P. E108 P. E110

GearmotorGearmotor with Brake Water-Resistant Specification P. E44

E1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Process of selection and example of selection


Example of Selection
Application Conveyor Speed Weight of Work Mass of Work Type of Drive Operating Time Starting & Stopping Frequency Area of Use Coefficient of Friction

In case of Shaft Mount

Conveyor (Moderate shock load) 10m/min 50kg 50kgf Chain 12 hours/day 720 times/day Area of Power Supply Frequency of 60Hz Supposed to be 0.2

Sprocket PCD 150 3kg/unit 3kgf/unit

V=10m/min

M=50kg W=50kgf

r Chain5kg 5kgf

Chain(1), Sprocket(1) and other conditions were neglected for this calculation.

Process of Selection
Deciding Type Determining Reduction Ratio
Selection of hollow shaft, right angle shaft, or parallel shaft Determine Reduction Ratio:

Example of Selection SI Unit Gravimetric Unit

Decide on Mini Series F2-Type, F2S-Type (hollow shaft) model considering from the shaft mounting. Required Rotation Speed of Conveyor Shaft 21.2 1 75 1600 150 9.0N m 21000 i 1 80 150 0.92kgf m 21000 101000 150 21.2 rpm

Required Rotation Speed of Output Shaft i 1600 assumption


Calculate Actual Load Torque(TL) Calculate equivalent torque(TLE) of output shaft from service factor: (sf given in Table-1 on page E6)

Since the rotation speed of the conveyor shaft and that of the reducer's output shaft are the same.

Note Rotation speed of the motor changes in between cynchronous rotation speed and rated rotation speed as load changes.

Checking Torque

TL9.8 50325 0.2

TL 50325 0.2

Adjust Actual Load Torque(TL) using a Service Factor (Sf). TLE9.01.2511.25N m TLE0.921.251.15kg f m

TLETLSf
Choose the allowable torque(TA) of output shaft from the performance table, which should be greater than TLE

Select an appropriate model of TLETA F2SM-12-80-T40 Calculate Actual Load Inertia Moment(IL) 0.15 2 1 0.15 2 0.15 2 I L 3 50 25 2 2 2 2 0.33kg m2 Convert IL into the equivalent value at the motor shaft I I I L i 1 2 I 0.33 80 0.000052kg m2
2 2 Calculate Actual load GDGD 2 L 2 1 GD L 500.152 30.1522 50.152 2 2 1.31kgf m

Checking Inertia

Calculate Actual Load Inertia

Calculate Load Inertia converted to Motor Shaft

Convert GD 2 into the equivalent value at the motor shaftGD L GD GD i 1 2 2 GD 1.31 80 0.000205kgf m2
2 2 L 2

Calculate Equivalent Inertia using the correction factor corresponding to the operating condition.

Correction factor from the operating condition is 3. Calculate Equivalent Inertia Moment I I
E 2 Calculate Equivalent GDGD 2 2 2 E

I E I Correction factor I E 0.00005230.000156kg m2


Choose the model which satisfy I E Allowable Inertia Moment IA
From Table-2 on page E6, choose the model which satisfy Equivalent Inertia Allowable Inertia.

GDGD Correction factor E 2 GD0.00020530.000615kgf m2 E


2 2 Choose the model which satisfy GDAllowable GDGD2 A E

F2SM-15-80-T60 Finally we can determine the model F2SM-15-80-T60 Torque Arm TAF2S-15(Option Number) is recommended. Refer to page E85. In case the torque arm is to be made by customer, the distance(r) from the center of the output shaft to the fixing point, should be no less than 9.1mm by the calculation below: r Actual Load Torque1000 Allowable O.H.L. mass of Reducer 11.25 1.15 1000 9.1 1274 130 9.84 4

Final Decision

Select the most appropriate model which satisfy all the conditions required from torque, inertia and O.H.L.

For the calculation formula of Torque Arm, refer to page E85.

E2

Technical Information

Example of Selection
Application Conveyor Speed Weight of Work Mass of Work Type of Drive Operating Time Starting & Stopping Frequency Area of Use Coefficient of Friction

Gearmotor(with motor)

Sprocket 2 PCD 150 3kg/unit 3kgf/unit

Sprocket 1 50

V=10m/min
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

Conveyor (Moderate shock load) 10m/min 40kg 40kgf Chain (Located on the center of shaft) 12 hours/day 720 times/day Area of Power Supply Frequency of 60Hz Supposed to be 0.2

M=40kg W=40kg f

Chain 1
50

Chain 2
5kg 5kgf

Chain(1), Sprocket(1) and other conditions were neglected for this calculation.

Process of Selection
Deciding Type Determining Reduction Ratio
Selection of right angle shaft or parallel shaft Determine Reduction Ratio:

Example of Selection SI Unit Gravimetric Unit

Decide on a GTR Mini Series H-Type (right angle shaft) considering the mounting space. Required Rotation Speed of Conveyor Shaft 21.2 1 75 1600 150 7.5N m 21000 i 1 80 150 0.77kgf m 21000 101000 150 21.2 rpm

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Required Rotation Speed of Output Shaft i 1600 assumption


Calculate Actual Load Torque(TL) Calculate equivalent torque(TLE) of output shaft from service factor: (sf given in Table-1 on page E6)

Since the diameter of sprocket for conveyor shaft and that of reducer output shaft are the same, we obtain.

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note Rotation speed of the motor changes in between cynchronous rotation speed and rated rotation speed as load changes.

Checking Torque

TL9.8 40325 0.2

TL 40325 0.2

Adjust Actual Load Torque(TL) using a Service Factor (Sf). TLE7.51.259.4N m TLE0.771.250.96kgf m
L

TLETLSf
Choose the allowable torque(TA) of output shaft from the performance table, which should be greater than TLE

Select an appropriate model of TLETA HLM-15 R -80-T40 T Calculate Actual Load Inertia Moment(IL) 0.15 2 1 0.15 2 0.15 2 I L 3 40 25 2 2 2 2 0.27kg 2 m Convert IL into the equivalent value at the motor shaft I I I L i 2 1 2 I 0.27 80 0.000042kg m2
2 Calculate Actual load GDGD 2 L 2 1 GD L 400.152 30.1522 50.152 2 2 1.08kgf m

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information E

Checking Inertia

Calculate Actual Load Inertia

Calculate Load Inertia converted to Motor Shaft

Convert GD into the equivalent value at the motor shaftGD 2 GD 2 GD 2 i L 1 2 GD 2 1.08 80 0.000169kgf m2

2 L

Calculate Equivalent Inertia using the correction factor corresponding to the operating condition.

Correction factor from the operating condition is 3. Calculate Equivalent Inertia Moment I I
E

2 Calculate Equivalent GDGD

Standard Motors

I E I Correction factor I E 0.00004230.000126kg m2


Choose the model which satisfy I E Allowable Inertia Moment IA
From Table-2 on page E6, choose the model which satisfy Equivalent Inertia Allowable Inertia.
L

2 GDGD 2 Correction factor E 2 GD0.00016930.000507kgf m2 E 2 2 Choose the model which satisfy GDAllowable GDGD2 A E

Cautions for Safety

HLM-18R -80-T60 T K11 K21 O.H.L. 9.411 376N 50 21000 O.H.L. 0.9611 38.4kgf 50 21000

Option

Checking O.H.L.

Determine K1 by the type of drive Table-5 on page E8 Determine k2 by the location of the load Table-6 on page E8

O.H.L.

TLE K1K2 R

R: Pitch Circle Radius of sprocket, etc. equipped to reducer shaft Select O.H.L.Allowable O.H.L. from the performance table

Select the model which satisfy O.H.L.Allowable O.H.L., then found HLM-15 R -80-T15 T

Final Decision

Select the most appropriate model which satisfy all the conditions required from torque, inertia and O.H.L.

The most appropriate model is HLM-18 R -80-T60 T

E3

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Process of selection and example of selection


An example of Selection
Application Conveyor Speed Weight of Work (Mass of Work Type of Drive Operating Time Starting & Stopping Frequency Area of Use Coefficient of Friction

Speed Control Gearmotor


Sprocket 2PCD 150 3kg/unit 3kgf/unit

Sprocket 1 50 V=210m/min M=20kg W=20kgf

Conveyor (Moderate shock load) 210m/min 20kg 20kgf Chain(Located on the center of shaft) 12 hours/day 10 times/day Area of Power Supply Frequency of 60Hz Supposed to be 0.2

Chain 1

50

Chain 2 5kg 5kgf

Chain(1), Sprocket(1) and other conditions were neglected for this calculation.

Process of Selection
Deciding Type Determining Reduction Ratio
Decide on Right Angle Shaft or Parallel Shaft

Example of Selection SI Unit Gravimetric Unit

Decide on a GTR Mini Series G-Type (parallel shaft) considering the mounting space. Required Rotation Speed of Conveyor Shaft 21000 101000 150 150 4.221.2rpm

Determine Reduction Ratio:

Required Rotation Speed of Output Shaft i 1550 assumption

Required Rotation Speed of gearmotor is also 4.221.2rpm. Calculate ratio i using larger rpm, 21.2rpm. 21.2 1 1300 1550 73 for 50Hz, use 1 1 From model chart, take ratio i = , less than i = and the closest. 60 73 i

Checking Torque

Calculate Actual Load Torque(TL) Calculate equivalent torque(TLE) of output shaft from service factor: (sf given in Table-1 on page E6)

TL9.8 20325 0.2

150 4.6N m 21000

TL 20325 0.2

150 0.47kgf m 21000

Adjust Actual Load Torque(TL) using a Service Factor (Sf). TLE4.61.255.8N m Select an appropriate model of TLETA Consider from loading torque GLP-12-60-S25 GLP-15-60-S40 or select GLP-15-60-S60 1 0.59kgf m and ratio i , 60

Adjust Actual Load Torque(TL) using a Service Factor (Sf). TLE0.471.250.59kgf m Select an appropriate model of TLETA Consider from loading torque GLP-12-60-S25 GLP-15-60-S40 or select GLP-15-60-S60 Calculate motor shaft rotation speed, Max rotation speed 21.2601272rpm Minimum rotation speed 4.260 252rpm Confirm torque loading factor is under limit line. Figure-1 torque loading factor 0.59 GLP-12-60-S25 10087 1 0.68 0.59 GLP-15-60-S40 10054 2 1.1 0.59 GLP-15-60-S60 10035 3 1.7 therefore, select GLP-15-60-S60 1 0.59kgf m and ratio i , 60

TLETLSf
Choose the allowable torque(TA) of output shaft from the performance table, which should be greater than TLE

Figure-1
50Hz 60Hz 200 limit line

Calculate motor shaft rotation speed, Max rotation speed 21.2601272rpm Minimum rotation speed 4.260 252rpm Confirm torque loading factor is under limit line. Figure-1 torque loading factor 5.8 GLP-12-60-S25 10087 1 6.66

150

Torque

100
1

5.8 GLP-15-60-S40 10054 2 10.8 5.8 GLP-15-60-S60 10035 3 16.7 therefore, select GLP-15-60-S60
1500

50 252rpm

1,272rpm

500

1000 Rotation Speed rpm

E4

Technical Information

Process of Selection
Calculate Actual Load Inertia

Example of Selection SI Unit


Calculate Actual Load Inertia Moment(IL) 0.15 2 1 0.15 2 0.15 2 I L 3 20 25 2 2 2 2 0.16kg 2 m Convert IL into the equivalent value at the motor shaft I I I L i 2 1 2 I 0.16 60 0.000044kg m2

Gravimetric Unit
Calculate Actual Load GDGD 2 1 GD L 200.152 30.1522 50.152 2 2 0.63kgf m
2 2 L Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Checking Inertia

Calculate Load Inertia converted to Motor Shaft

Convert GD 2 into the equivalent value at the motor shaftGD L 2 GD 2 GD 2 i L 1 2 GD 2 0.63 60 0.00018kgf m2

Calculate Equivalent Inertia using the correction factor corresponding to the operating condition.

Correction factor for the operating conditions is 2. Calculate Equivalent Inertia Moment I I
E

Calculate Equivalent GDGD


2

I E I Correction factor I E 0.00004420.000088kg m2

2 GDGD 2 Correction factor E 2 GD0.0001820.00036kgf m2 E

2 2 Choose the model which satisfy I E Allowable Inertia Moment IA Choose the model which satisfy GDAllowable GDGD2 A E

From Table-2 on page E6, choose the model which satisfy Equivalent Inertia Allowable Inertia. Determine K1 by the type of driveTable-5 on page E8 Determine k2 by the location of the loadTable-6 on page E8

GLP-12-60-S25

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Checking O.H.L.

K11 K21

O.H.L.

TLE K1K2 R

O.H.L.

R: Pitch Circle Radius of sprocket, etc. equipped to reducer shaft Select O.H.L.Allowable O.H.L. from the performance table

5.811 232N 50 21000

O.H.L.

0.5911 23.6kgf 50 21000

Gearmotor with Brake

With Waterresistant Brake Motor

Select the model which satisfy O.H.L.Allowable O.H.L., then found GLP-12-60-S25
Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Final Decision

Select the most appropriate model which satisfy all the conditions required from torque, inertia and O.H.L.

The most appropriate model is GLP-15-60-S60

Standard Motors

Cautions for Safety

Option

E5

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Technical Note
Service Factor (Sf)
GTR Mini Series, GTR-L Series and gearmotors are designed for the operation of 10 hrs/day with moderate shock loads. In case of using in severer condition, adjust the load torque with the Table-1 below.

Table-1
Load Condition Under 3 hrs/day Service Factor(Sf) 310 hrs./day Over 10 hrs/day Application
Conveyors(uniform load), Screens, Agitators(low viscosity), Sewage Disposal Equipments(light load), Machine Tools(feed shaft), Elevators, Extruders, Distillers

Uniform Load

Moderate Shock Load

1.25

Conveyors(non-uniform or heavy load), Agitators(high viscosity), Machines for Vehicles, Sewage Disposal Equipments(moderate load), Hoists(light load), Paper Mills, Feeders, Food Machines, Pumps, Sugar Mills, Textile Machines Hoists(heavy load), Hammer Mills, Metal Mills, Crushers, Tumblers

Heavy Shock Load

1.25

1.5

2 Allowable Inertia Moment I (IA) Allowable GD2 (GD A)

When operating gearmotors intermittently under high inertia load, critical torque may instantaneously arise at the starting(or stopping in brake gearmotor). This may cause unexpected accident, therefore, be sure that the inertia of the connecting machine should be within the allowable value listed in the Table below, which may vary according to the connecting type and/or starting frequency.

Allowable Inertia Moment I by CapacityGD2


Motor shaft or Input Shaft Equivalent
2 Unit: Inertia Moment Ikg m2GDkgf m2 Table-2

Table-3
2 Unit: Inertia Moment Ikg m2GDkgf m2

GTR Mini Series G-Type GT-Type Frame G-12 Frame G-22 15254060W Frame G-15 Frame G-28 Frame G-32 Frame G-18 Frame G-40 Clutch/ Brake H-Type F2-Type Allowable Inertia Moment I A I 2 2 AllowableGDGD A 0.0001 0.0004 G-Type Frame G-10 Frame G-12 Frame G-15 25W Frame F2F-18 0.0002 0.0008 Frame G-15 40W

GTR-L Series Low-torque type Allowable Inertia Allowable Inertia Moment I A I Moment I A I 2 2 2 AllowableGDGD A AllowableGDGD A 2 0.00004 0.00015 0.00010.0004 0.00020.0008 0.00020.0008 0.00005 0.0002 0.00010.0004 0.00004 0.00015

GT8

Frame H-15 Frame G-12 Frame Frame H-22 Frame G-15 F2S-12 15254060W Frame H-18 Frame Frame G-18 Frame H-28 F2S-15 Frame H-32 Frame H-40

Frame F2F-15

GT9

0.0006 0.0025

2 Note 1 Motor shaft input shaftequivalent inertia moment I = Output shaft inertia moment I reduction ratio 2 Example: In case the reduction ratio is 1/20, the answer is 1/400. GD2 =Output shaft GD2 reduction ratio

Correction Factor for Allowable Inertia Moment I by Operating ConditionAllowable GD2 Table-4
Connection Type Direct Coupling (without slack) Starting Frequency Under 70 times/day Over 70 times/day Under 70 times/day Over 70 times/day Correction Factor 1 1.5 2 3

By Chain (with slack)

E6

Technical Information

Calculation of Inertia Moment IGD2Flywheel Effect


The conversion between the inertia moment(kg m2)-(SI units) and the gravimetric units GD2 (kg m2) are calculated as follows:
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

GD2 l 4

GGravity kgf DRotation Diameter m l Inertia Moment kg m2

Inertia Moment in RotationGD2


When the center of rotation is concentric with the center of gravity SI Unit Gravimetric Unit
D r m 2 R m

When the center of rotation is not concentric with the center of gravity SI Unit Gravimetric Unit

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

D r m 2 Mass M kg Weight W kgf

1 I Mr2 2
kg m2

1 GD2 2 2 WD
kgf m2

1 I Mr2MR2 2
kg m2

1 GD2 24WR2 WD 2
kgf m2

Mass M kg Weight W kgf

D r1 m 2 d r2 m 2

D m

R m

1 1 I M 2r 2 GD2 D2d2 2 r 1 2 2 W
kg m2 kgf m2
Mass M kg Weight W kgf

when you can ignore sizewhen you can ignore size

With Waterresistant Brake Motor Speed Control Gearmotor

I MR2
kg m2

GD24WR2
kgf m2

d m

Mass M kg Weight W kgf

Inertia Moment in Linear MotionGD2


SI Unit
Mass M kg Weight W kgf Linear Motion n rpm Mass M kg P=Lead of screw m/rev Weight W kgf

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gravimetric Unit

Gearmotor with Brake

Ordinary Use

Velocity V m/min

1 V I 4 M n

V GD2W n

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

kg m2

kgf m2

V m/min

Horizontal Linear Motion (driven with lead screw)


Lead screw D r m 2

1 P 2 I M 4 V 1 4 M n

GD2W
2

V n
2

W
kg m2

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

kgf m2

Horizontal Linear Motion (conveyors, etc.)

Mass Mkg 1 1 Weight Wkgf


D m

1 I M1r2 M2r2 2 1 M3r2M4r2 2

1 GD2W1D2 W2D2 2 1 W3D2W4D2 2


kgf m2

D m
2 Mkg Wkgf 2

Mkg kgf 4 W4

Mkg 3 Wkgf 3

kg m2

Standard Motors

Vertical Linear Motion (cranes, winches, etc.)

Dram

D m

D r m 2 rope Mass Mkg 1 Weight Wkgf 1

1 I M1r2 M2r2 2
kg m2

1 GD2W1D2 W2D2 2
kgf m2

Cautions for Safety

Mkg 2 Wkgf 2

Option

Conversion of Inertia Moment when Speed Ratio is available


2 IGD a a 2 The inertia moment Ib (GD) of the load can be converted into b the equivalent value at the na shaft as shown below:

n rpm b
a n rpm 2 IGD b b

nb 2 I = Ia na Ib nb 2 2 GD2 =GD a GD 2 a n b

E7

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Technical Note
Overhung Load (O.H.L.)
An overhung load is a suspending load imposed on a shaft. In the coupling of reducer shaft and other machine, if chains, belts and gears are used, this O.H.L. must be taken into consideration.

TLEK1K2 O.H.L. N kgf R

TLEEquivalent output torque imposed on reducer shaftN m kgf m R Pitch Circle Radius(m) of sprocket, pulley, gear, etc. attached to reducer shaft. K1Factor for the connecting method (Refer to Table-5) K2Factor for the load point (Refer to Table-6)

Be sure that the OHL value calculated by above formula should not exceed the allowable OHL value listed in the performance table. In the case of the hollow shaft, please calculata with coefficient K2 as 1.00.

Factor K1
Connecting Method Chain, Timing Belt Gear V-Belt K1 1.00 1.25 1.50

Table-5

Load Point Table-6

Factor K2
Load Point Root of the shaft Center of the shaft End of the shaft K2 0.75 1.00 1.50

Root

Center

End

Thrust Load
The thrust load values of F2-Type and F2S hollow shaft listed in the performance table. are Please contact us for the other models.

E8

Technical Information

Overhung Load on a Hollow Shaft(O.H.L.)


Flange Mounting
1. Load Point of O.H.L.
Allowable OHL is calculated at the point 20mm off from the end of output shaft.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

2-1. Adjustment of O.H.L. without any support by pillow


When load point of O.H.L. (L) become greater than 10mm, the allowable O.H.L. can be corrected by the following formula:

2-2. Correction of O.H.L. when supported by pillow at one end

Bearable O.H.L N kgf

A10 Allowable O.H.L N kgf AL

Bearable O.H.L N kgf

S Allowable O.H.L N kgf SL

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

NoteRefer Table-7 for A.

Loading point

Loading point

Table-7
Frame mm Number A 12 15 43 55 L L S
With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

In case of Shaft Mounting


When a customer-made torque arm instead of the optional part is to be prepared, and: In case of using the torque arm shown in Fig.2. The distance: r, from the center of the output shaft to the fixing point, should be as follows: In case of using the torque arm shown in Fig.3. The distance: r, from the center of the output shaft to the fixing point, should be as follows:

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

SI Units mm r Actual Load Torque 1000 N m Allowable O.H.L. N 9.8Mass of Gearmotor kg

SI Units Actual Load Torque Nm AM 1000 mm r Allowable O.H.L. 9.8Mass of Gearmotor kg N A10 Gravimetric Units Actual Load Torque kgfm AM 1000 mm r AllowableO.H.L. kgf Weight of the reducerkgf A10
NoteRefer to Table-7 for the constant A.

Gravimetric Units Actual Load Torque 1000 N m mm r Allowable O.H.L. kgf Weight of the reducerkgf

Standard Motors

Figure-2

Figure-3

Cautions for Safety

Option

r
Torque Arm Torque Arm

For the required thickness of torque arm, efer to P. E85 Torque Arm (optional part).

E9

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Technical Note
Sample Calculation for Gearmotor with Brake/Gearmotor with Clutch/Brake
SI Unit Gravimetric Unit Notes
Note 1 When the load torque
become negative such as winding down, T should be (T) . 2 For the mark Clutch , should be and B rake should be .

Braking Time Gearing Time of Clutch (ttb)

ttbtabtaS Ir In tab s 9.57 TdT

ttbtabtaS 2 2 GD r GD n tab s 375 TdT

Geared Total Work E clutch brake or brake of


Note 1 When the load torque

Geared Total Work E

Ir I n2 E 183 Td J TdT

2 2 GD 2 r GD n E 7160 Td kgf m TdT

become negative such as winding down, T should be (T) . 2 For the mark Clutch , should be and B rake should be .

Life

The life of clutch/brake lining varies according to surface pressure, temperature, slip speed, etc. Therefore, it is not possible to obtain exact value, however, the round number of life-time braking frequency can be estimated by the following formula:

Emax times of braking E

Explanations of Code and Referring Page, Table, Fig. No.


ta Ir GD2 r IGD 2 n Td
to below chart Referring Brake delay time of gearmotor with brake to below chart Referring Armature braking time of gearmotor with clutch/brake to below chart Referring Gearmotor with brake to below chart Referring Gearmotor with clutch/brake Inertia Moment of load I Motor shaft or reducer Input Shaft Equivalent of (GD2kgm2kgfm2 ) Rotation speed of clutch shaft or brake shaft rpm Dynamic friction torque against the corresponding rotation speed of clutch/brake N m kgf m to below chart Referring Gearmotor with brake to below chart Referring Gearmotor with clutch/brake Equivalent load torque converted to reducer input shaft kgf m N m Allowable total work( J )(kgf m) of clutch/brake to below chart Referring Gearmotor with clutch to below chart Referring Gearmotor with clutch/brake

T Emax

Referring Page, Table and Fig. No.


GTR Mini Series Designation Model G H F2 Type With brake G H F2 Type Water-Resistant GT Type GTR-L Series G Type

P.E37 Table-19 P.E47 Table-21 P.E37 Table-19 P.E37 Table-19 G-Type only P.E74 Table-24 P.E26 Table-89P.E26 Table-89 P.E27 Table-1011 P.E27 Table-1213 G-Type only P.E28 Table-14 P.E34 Table-17 P.E44 Table-20 P.E34 Table-17 P.E34 Table-18 G-Type only P.E74 Table-24 P.E34 Table-17 P.E44 Table-20 P.E34 Table-17 P.E34 Table-18 G-Type only P.E74 Table-24

ta

With Clutch/brake With brake

Ir GD 2 r

With Clutch/brake With brake

Td

With Clutch/brake With brake

Emax

With Clutch/brake

E10

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E11

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Structural chart and Nameplate


Parallel Shaft

19

20

18

17

13

22

21

12

14

16

2 9 15

11
1 2 3 4 5

10
21 Stator Core 22 Rotor Core

Case Case Cover Input Shaft 1 Shaft Gear 1 Shaft Pinion

6 7 8 9 10

Output Shaft Gear Output Shaft Metal Bearing Bearing

11 12 13 14 15

Bearing Bearing Bearing Oil seal Oil seal

16 17 18 19 20

O-ring Motor Bracket Fan Attaching Screw Fan Cover

Right Angle Shaft Solid Shaft type

18

11 8 13

5 15 3 19

16

26

27

17 22

23

25

24

2
1 2 3 4 5

21

20
6 7 8 9 10

10

12

14
11 12 13 14 15

4 Bearing Bearing Bearing Bearing Bearing


16 17 18 19 20

Case Case Cover Input Shaft 1 Shaft Gear 1 Shaft Pinion

2 Shaft Gear 2 Shaft Pinion Output Shaft Gear Output Shaft Bearing

Bearing Bearing Oil seal Oil seal Seal Cap

21 22 23 24 25

26 Stator Core O-ring 27 Rotor Core Motor Bracket Fan Attaching Screw Fan Cover

E12

Technical Information

Right Angle Shaft Hollow shaft type


Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

18

9 11 8 13

5 15 3 20

16

26

27

17 22

23

25

24

21

19

28
6 7 8 9 10

10

12

14

4
16 Bearing 17 Bearing 18 Oil seal 19 Oil seal 20 Oil seal 21 O-ring 22 Motor Bracket 23 Fan 24 Attaching Screw 25 Fan Cover 26 Stator Core 27 Rotor Core 28 Safety Cap

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1 Case 2 Case Cover 3 Input Shaft 4 1 Shaft Gear 5 1 Shaft Pinion

2 Shaft Gear 2 Shaft Pinion Output Shaft Gear Output Shaft Bearing

11 Bearing 12 Bearing 13 Bearing 14 Bearing 15 Bearing

With Waterresistant Brake Motor

How to read the Nameplate


A

A E C G F D

I K M

B C D E F G H I J K L M

GLMN-15-50-S60X
PH:1 INDUCTION MOTOR 2340 60W 4P RATIO 50:1 100V 50Hz 0.90A 1350rpm 100V 60Hz 1.00A 1600rpm 15 F

L J B H

IP20 Ins. E JIS C 4004 S1 CONT. DS-90 2008 MFG.NO.8X123456001 NISSEI CORP. made in Japan

Product type name Reduction Ratio Motor capacity Manufacturing number Number of Phase Rating Motor characteristic Insulation classification Number of pole Capacitor Capacity Single-Phase only Auxiliary code X Additional number QR code (Nissei private controlling code)

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

How to read the namufacturing number

Cautions for Safety

Option

8X 123456001
Unit number Serial number Nissei's control number date of namufacture month 1 : January 9 : September X : October Y : November Z : December date of namufacture year last one digit of dominical year

E13

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Motor Specifications
G-Type 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 T15 Voltage V 200/200/220 Frame Frequency Hz Number 50/60/60 12 22 12 15 22 28 12 15 18 22 28 32 12 15 18 22 28 32 15 18 28 32 40 Rated Current A 0.14/0.13/0.13 0.14/0.13/0.13 0.21/0.19/0.19 0.18/0.17/0.17 0.21/0.19/0.19 0.18/0.17/0.17 0.29/0.27/0.27 0.27/0.26/0.26 0.21/0.21/0.21 0.29/0.27/0.27 0.27/0.26/0.26 0.27/0.26/0.26 0.42/0.39/0.39 0.40/0.36/0.36 0.33/0.33/0.33 0.42/0.39/0.39 0.40/0.36/0.36 0.40/0.36/0.36 0.51/0.48/0.48 0.47/0.47/0.47 0.51/0.48/0.48 0.51/0.48/0.48 0.47/0.47/0.47 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1600 Striking Current A 0.30/0.28/0.31 0.30/0.28/0.31 0.44/0.42/0.46 0.43/0.41/0.46 0.44/0.42/0.46 0.43/0.41/0.46 0.67/0.62/0.68 0.73/0.69/0.76 0.66/0.64/0.70 0.67/0.62/0.68 0.73/0.69/0.76 0.73/0.69/0.76 0.94/0.86/1.00 1.04/0.97/1.07 1.06/1.01/1.11 0.94/0.86/1.00 1.04/0.97/1.07 1.04/0.97/1.07 1.42/1.36/1.49 1.59/1.51/1.66 1.42/1.36/1.49 1.42/1.36/1.49 1.59/1.51/1.66

25

T25

200/200/220

50/60/60

40

T40

200/200/220

50/60/60

60

T60

200/200/220

50/60/60

90

T90

200/200/220

50/60/60

G-Type 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 T15W Voltage V 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 12 22 12 15 22 28 12 15 18 22 28 32 15 18 22 28 32 15 18 28 32 40 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.10/0.10/0.10/0.10 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.16/0.16/0.16/0.16 0.20/0.20/0.20/0.20 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 Rated Speed rpm 1400/1400/1700/1700 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1250/1300/1500/1550 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 Striking Current A 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.26/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.31/0.34/0.32/0.35 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.33/0.35/0.33/0.37 0.43/0.45/0.43/0.47 0.48/0.51/0.49/0.54 0.38/0.40/0.38/0.41 0.43/0.45/0.43/0.47 0.43/0.45/0.43/0.47 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81

25

T25W

380/400/400/440

50/50/60/60

40

T40W

380/400/400/440

50/50/60/60

60

T60W

380/400/400/440

50/50/60/60

90

T90W

380/400/400/440

50/50/60/60

E14

Technical Information

G-Type Single-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15 Voltage V 100/100 Frame Frequency Hz Number 50/60 12 22 12 15 22 28 12 15 18 22 28 32 15 18 22 28 32 15 18 28 32 40 Rated Current A 0.39/0.35 0.39/0.35 0.48/0.48 0.44/0.45 0.48/0.48 0.44/0.45 0.67/0.80 0.61/0.66 0.63/0.64 0.67/0.80 0.61/0.66 0.61/0.66 0.90/1.00 0.90/1.00 0.90/1.10 0.90/1.00 0.90/1.00 1.30/1.40 1.20/1.40 1.30/1.40 1.30/1.40 1.20/1.40 Rated Speed rpm 1350/1650 1350/1650 1350/1600 1350/1650 1350/1600 1350/1650 1400/1650 1350/1650 1400/1650 1400/1650 1350/1650 1350/1650 1350/1600 1400/1650 1300/1500 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 Striking Current A Capacitor F 0.72/0.67 0.72/0.67 0.86/0.80 1.00/0.92 0.86/0.80 1.00/0.92 1.26/1.23 1.43/1.36 2.16/2.00 1.26/1.23 1.43/1.36 1.43/1.36 2.11/1.98 2.55/2.37 1.33/1.34 2.11/1.98 2.11/1.98 2.89/2.68 3.27/3.04 2.89/2.68 2.89/2.68 3.27/3.04 5 5 7 7 7 7 12 10 10 12 10 10 15 15 15 15 15 20 20 20 20 20
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

25

S25

100/100

50/60

40

S40

100/100

50/60

60

S60

100/100

50/60

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

90

S90

100/100

50/60

G-Type Single-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15W Voltage V 200/200 Frame Frequency Hz Number 50/60 12 22 12 15 22 28 12 15 18 22 28 32 15 18 22 28 32 15 18 28 32 40 Rated Current A 0.21/0.19 0.21/0.19 0.26/0.25 0.23/0.24 0.26/0.25 0.23/0.24 0.34/0.33 0.29/0.34 0.31/0.32 0.34/0.33 0.29/0.34 0.29/0.34 0.45/0.48 0.42/0.45 0.43/0.50 0.45/0.48 0.45/0.48 0.65/0.66 0.59/0.65 0.65/0.66 0.65/0.66 0.59/0.65 Rated Speed rpm 1350/1650 1350/1650 1350/1600 1350/1650 1350/1600 1350/1650 1350/1600 1350/1600 1400/1650 1350/1600 1350/1600 1350/1600 1350/1600 1400/1650 1300/1500 1350/1600 1350/1600 1350/1600 1400/1650 1350/1600 1350/1600 1400/1650 Striking Current A Capacitor F 0.35/0.33 0.35/0.33 0.47/0.44 0.46/0.45 0.47/0.44 0.46/0.45 0.66/0.60 0.64/0.61 0.98/0.92 0.66/0.60 0.64/0.61 0.64/0.61 1.06/1.00 1.29/1.22 0.67/0.64 1.06/1.00 1.06/1.00 1.44/1.35 1.67/1.58 1.44/1.35 1.44/1.35 1.67/1.58 1.2 1.2 1.7 1.7 1.7 1.7 2.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 3.5 5 5 5 5 5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

25

S25W

200/200

50/60

40

S40W

200/200

50/60

Standard Motors

60

S60W

200/200

50/60

Cautions for Safety

Option

90

S90W

200/200

50/60

E15

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Motor Specifications
H-Type 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 T15 Voltage V 200/200/220 Frame Frequency Hz Number 50/60/60 15 22 15 22 28 15 18 22 28 32 15 18 22 28 32 18 28 32 40 Rated Current A 0.14/0.13/0.13 0.14/0.13/0.13 0.21/0.19/0.19 0.21/0.19/0.19 0.18/0.17/0.17 0.29/0.27/0.27 0.27/0.26/0.26 0.29/0.27/0.27 0.27/0.26/0.26 0.27/0.26/0.26 0.42/0.39/0.39 0.40/0.36/0.36 0.42/0.39/0.39 0.40/0.36/0.36 0.40/0.36/0.36 0.51/0.48/0.48 0.51/0.48/0.48 0.51/0.48/0.48 0.47/0.47/0.47 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1550 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1550 1350/1550/1600 Striking Current A 0.30/0.28/0.31 0.30/0.28/0.31 0.44/0.42/0.46 0.44/0.42/0.46 0.43/0.41/0.46 0.67/0.62/0.68 0.73/0.69/0.76 0.67/0.62/0.68 0.73/0.69/0.76 0.73/0.69/0.76 0.94/0.86/1.00 1.04/0.97/1.07 0.94/0.86/1.00 1.04/0.97/1.07 1.04/0.97/1.07 1.42/1.36/1.49 1.42/1.36/1.49 1.42/1.36/1.49 1.59/1.51/1.66

25

T25

200/200/220

50/60/60

40

T40

200/200/220

50/60/60

60

T60

200/200/220

50/60/60

90

T90

200/200/220

50/60/60

H-Type 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 T15W Voltage V 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 15 22 15 22 28 15 18 22 28 32 18 22 28 32 18 28 32 40 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.20/0.20/0.20/0.20 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 Rated Speed rpm 1400/1400/1700/1700 1400/1400/1700/1700 1350/1400/1600/1650 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1250/1300/1500/1550 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 Striking Current A 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.33/0.35/0.33/0.37 0.43/0.45/0.43/0.47 0.38/0.40/0.38/0.41 0.43/0.45/0.43/0.47 0.43/0.45/0.43/0.47 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81

25

T25W

380/400/400/440

50/50/60/60

40

T40W

380/400/400/440

50/50/60/60

60

T60W

380/400/400/440

50/50/60/60

90

T90W

380/400/400/440

50/50/60/60

E16

Technical Information

H-Type Single-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 S15 S25 Voltage V 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 15 22 15 22 28 15 18 22 28 32 18 22 28 32 18 28 32 40 Rated Current A 0.39/0.35 0.39/0.35 0.48/0.48 0.48/0.48 0.44/0.45 0.67/0.80 0.61/0.66 0.67/0.80 0.61/0.66 0.61/0.66 0.90/1.00 0.90/1.10 0.90/1.00 0.90/1.00 1.30/1.40 1.30/1.40 1.30/1.40 1.20/1.40 Rated Speed rpm 1350/1650 1350/1650 1350/1600 1350/1600 1350/1650 1400/1650 1350/1650 1400/1650 1350/1650 1350/1650 1350/1600 1300/1500 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 Striking Current A Capacitor F 0.72/0.67 0.72/0.67 0.86/0.80 0.86/0.80 1.00/0.92 1.26/1.23 1.43/1.36 1.26/1.23 1.43/1.36 1.43/1.36 2.11/1.98 1.33/1.34 2.11/1.98 2.11/1.98 2.89/2.68 2.89/2.68 2.89/2.68 3.27/3.04 5 5 7 7 7 12 10 12 10 10 15 15 15 15 20 20 20 20
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

40

S40

100/100

50/60

60

S60

100/100

50/60

90

S90

100/100

50/60

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

H-Type Single-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15W Voltage V 200/200 Frame Frequency Hz Number 50/60 15 22 15 22 28 15 18 22 28 32 18 22 28 32 18 28 32 40 Rated Current A 0.21/0.19 0.21/0.19 0.26/0.25 0.26/0.25 0.23/0.24 0.34/0.33 0.29/0.34 0.34/0.33 0.29/0.34 0.29/0.34 0.45/0.48 0.43/0.50 0.45/0.48 0.45/0.48 0.65/0.66 0.65/0.66 0.65/0.66 0.59/0.65 Rated Speed rpm 1350/1650 1350/1650 1350/1600 1350/1600 1350/1650 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1300/1500 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 1400/1650 Striking Current A Capacitor F 0.35/0.33 0.35/0.33 0.47/0.44 0.47/0.44 0.46/0.45 0.66/0.60 0.64/0.61 0.66/0.60 0.64/0.61 0.64/0.61 1.06/1.00 0.67/0.64 1.06/1.00 1.06/1.00 1.44/1.35 1.44/1.35 1.44/1.35 1.67/1.58 1.2 1.2 1.7 1.7 1.7 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5 5 5 5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

25

S25W

200/200

50/60

40

S40W

200/200

50/60

60

S60W

200/200

50/60

Standard Motors

Cautions for Safety

90

S90W

200/200

50/60

Option

E17

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Motor Specifications
F2-Type F2S Hollow Shaft 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 12 12 12 15 12 15 15 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.29/0.27/0.27 0.27/0.26/0.26 0.42/0.39/0.39 0.40/0.36/0.36 0.51/0.48/0.48 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1600 1350/1550/1550 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.67/0.62/0.68 0.73/0.69/0.76 0.94/0.86/1.00 1.04/0.97/1.07 1.42/1.36/1.49

F2-Type F2S Hollow Shaft 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15W T25W T40W T60W T90W Voltage V 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 12 12 12 15 15 15 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 Rated Speed rpm 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 Striking Current A 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.43/0.45/0.43/0.47 0.70/0.74/0.69/0.77

F2-Type F2S Hollow Shaft 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15 S25 S40 S60 S90 Voltage V 100/100 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 12 12 12 15 15 15 Rated Current A 0.39/0.35 0.48/0.48 0.67/0.80 0.61/0.66 0.90/1.00 1.30/1.40 Rated Speed rpm 1350/1650 1350/1600 1400/1650 1350/1650 1350/1600 1350/1600 Striking Current A 0.72/0.67 0.86/0.80 1.26/1.23 1.43/1.36 2.11/1.98 2.89/2.68 Capacitor F 5 7 12 10 15 20

F2-Type F2S Hollow Shaft 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15W S25W S40W S60W S90W Voltage V 200/200 200/200 200/200 200/200 200/200 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 12 12 12 15 15 15 Rated Current A 0.21/0.19 0.26/0.25 0.34/0.33 0.29/0.34 0.45/0.48 0.65/0.66 Rated Speed rpm 1350/1650 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 Striking Current A 0.35/0.33 0.47/0.44 0.66/0.60 0.64/0.61 1.06/1.00 1.44/1.35 Capacitor F 1.2 1.7 2.5 2.5 3.5 5

E18

Technical Information

F2-Type F2F Solid Shaft 3-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 15 15 15 18 15 18 18 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.29/0.27/0.27 0.27/0.26/0.26 0.42/0.39/0.39 0.40/0.36/0.36 0.51/0.48/0.48 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1550 1350/1550/1600 1350/1550/1550 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.67/0.62/0.68 0.73/0.69/0.76 0.94/0.86/1.00 1.04/0.97/1.07 1.42/1.36/1.49
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

F2-Type F2F Solid Shaft 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15W T25W T40W T60W T90W Voltage V 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 15 15 15 18 18 18 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.14/0.14/0.14/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 Rated Speed rpm 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 Striking Current A 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.30/0.32/0.30/0.33 0.33/0.35/0.33/0.37 0.43/0.45/0.43/0.47 0.70/0.74/0.69/0.77

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

F2-Type F2F Solid Shaft 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15 S25 S40 S60 S90 Voltage V 100/100 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 15 15 15 18 18 18 Rated Current A 0.39/0.35 0.48/0.48 0.67/0.80 0.61/0.66 0.90/1.00 1.30/1.40 Rated Speed rpm 1350/1650 1350/1600 1400/1650 1350/1650 1350/1600 1350/1600 Striking Current A 0.72/0.67 0.86/0.80 1.26/1.23 1.43/1.36 2.11/1.98 2.89/2.68 Capacitor F 5 7 12 10 15 20

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

F2-Type F2F Solid Shaft 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15W S25W S40W S60W S90W Voltage V 200/200 200/200 200/200 200/200 200/200 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 15 15 15 18 18 18 Rated Current A 0.21/0.19 0.26/0.25 0.34/0.33 0.29/0.34 0.45/0.48 0.65/0.66 Rated Speed rpm 1350/1650 1350/1600 1350/1600 1350/1600 1350/1600 1350/1600 Striking Current A 0.35/0.33 0.47/0.44 0.66/0.60 0.64/0.61 1.06/1.00 1.44/1.35 Capacitor F 1.2 1.7 2.5 2.5 3.5 5

Cautions for Safety

Option

E19

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Motor Specifications
G-Type 3-Phase Standard Voltage Water-Resistant Specifications
Motor Motor Capacity Designation W 15 25 T15 T25 Voltage V 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 12 12 15 12 15 18 15 18 18 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.18/0.17/0.17 0.29/0.27/0.27 0.27/0.26/0.26 0.21/0.21/0.21 0.40/0.36/0.36 0.33/0.33/0.33 0.47/0.47/0.47 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1600 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.43/0.41/0.46 0.67/0.62/0.68 0.73/0.69/0.76 0.66/0.64/0.70 1.04/0.97/1.07 1.06/1.01/1.11 1.59/1.51/1.66

40

T40

200/200/220

50/60/60

60 90

T60 T90

200/200/220 200/200/220

50/60/60 50/60/60

G-Type 1-Phase Standard Voltage Water-Resistant Specifications


Motor Motor Capacity Designation W 15 25 40 60 S15 S25 S40 S60 Voltage V 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 12 12 15 15 18 18 Rated Current A 0.39/0.35 0.48/0.48 0.44/0.45 0.61/0.66 0.63/0.64 0.90/1.00 Rated Speed rpm 1350/1650 1350/1600 1350/1650 1350/1650 1400/1650 1400/1650 Striking Current A 0.72/0.67 0.86/0.80 1.00/0.92 1.43/1.36 2.16/2.00 2.55/2.37 Capacitor F 5 7 7 10 10 15

H-Type 3-Phase Standard Voltage Water-Resistant Specifications


Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frequency Hz 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 Frame Number 15 15 15 18 18 18 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.29/0.27/0.27 0.27/0.26/0.26 0.40/0.36/0.36 0.51/0.48/0.48 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1550 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.67/0.62/0.68 0.73/0.69/0.76 1.04/0.97/1.07 1.42/1.36/1.49

H-Type 1-Phase Standard Voltage Water-Resistant Specifications


Motor Motor Capacity Designation W 15 25 40 S15 S25 S40 Voltage V 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 15 15 18 Rated Current A 0.39/0.35 0.48/0.48 0.61/0.66 Rated Speed rpm 1350/1650 1350/1600 1350/1650 Striking Current A 0.72/0.67 0.86/0.80 1.43/1.36 Capacitor F 5 7 10

E20

Technical Information

F2 F2S Hollow Shaft 3-Phase Standard Voltage Water-Resistant Specifications


Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 12 12 12 15 15 15 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.29/0.27/0.27 0.27/0.26/0.26 0.40/0.36/0.36 0.51/0.48/0.48 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 1350/1550/1600 1350/1550/1550 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.67/0.62/0.68 0.73/0.69/0.76 1.04/0.97/1.07 1.42/1.36/1.49
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

F2 F2S Hollow Shaft 1-Phase Standard Voltage Water-Resistant Specifications


Motor Motor Capacity Designation W 15 25 40 S15 S25 S40 Voltage V 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 12 12 15 Rated Current A 0.39/0.35 0.48/0.48 0.61/0.66 Rated Speed rpm 1350/1650 1350/1600 1350/1650 Striking Current A 0.72/0.67 0.86/0.80 1.43/1.36 Capacitor F 5 7 10

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E21

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR-L Series

Motor Specifications
G-Type 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 25 40 T15 T25 T40 Voltage V 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 12 12 15 15 Rated Current A 0.14/0.13/0.13 0.21/0.19/0.19 0.18/0.17/0.17 0.27/0.26/0.26 Rated Speed rpm 1350/1550/1600 1350/1550/1600 1350/1550/1600 1350/1550/1550 Striking Current A 0.30/0.28/0.31 0.44/0.42/0.46 0.43/0.41/0.46 0.73/0.69/0.76

G-Type 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 T15W T25W T40W Voltage V 380/400/400/440 380/400/400/440 380/400/400/440 Frequency Hz 50/50/60/60 50/50/60/60 50/50/60/60 Frame Number 12 12 15 15 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.13/0.14/0.13/0.14 Rated Speed rpm 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 Striking Current A 0.26/0.28/0.26/0.29 0.26/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.33/0.35/0.33/0.37

G-Type 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 6 10 15 25 40 S06 S10 S15 S25 S40 Voltage V 100/100 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 10 10 12 12 15 15 Rated Current A 0.17/0.17 0.30/0.30 0.39/0.35 0.48/0.48 0.44/0.45 0.61/0.66 Rated Speed rpm 1300/1600 1300/1550 1350/1650 1350/1600 1350/1650 1350/1650 Striking Current A 0.25/0.25 0.42/0.41 0.72/0.67 0.86/0.80 1.00/0.92 1.43/1.36 Capacitor F 2.5 3.5 5 7 7 10

G-Type 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 10 15 25 40 S10W S15W S25W S40W Voltage V 200/200 200/200 200/200 200/200 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 10 12 12 15 15 Rated Current A 0.17/0.17 0.21/0.19 0.26/0.25 0.23/0.24 0.29/0.34 Rated Speed rpm 1300/1600 1350/1650 1350/1600 1350/1650 1350/1600 Striking Current A 0.22/0.22 0.35/0.33 0.47/0.44 0.46/0.45 0.64/0.61 Capacitor F 1 1.2 1.7 1.7 2.5

E22

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E23

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series/GTR-L Series

Motor Specifications
Torque Rotation Speed Characteristics
Induction Motor
Torque

3-Phase

1-Phase 100 Allowable Torque

1600 1800 Rotation Speed rpm

Shown above is a representative torque-curve. When details of the torque-carve are required, ask us.

Rated Current
The rated current, listed in the performance table and the motor characteristics table, indicates the rated value through a gearmotor. For a brake gearmotor and a gearmotor with clutch/brake, the current through the brake/clutch coil should also be taken into consideration. For more details, consult us.

Thermal Protector (optional part)


Attachable to prevent from the motor burnout. Thermal Protector cannot be attached to the models shown below:
Type G Frame Number 12 22 15 22 12 15 3-Phase 40W 60W 1-Phase 40W 60W Motor Capacity

H F2 F2S F2 F2F

All the thermal protectors are the signal cable taken out type. When built-in type is required, consult us. Example use of thermal protector(3-phase induction motor)
Thermal Protector MCa contact MCa contact MCa contact yellow yellow

MC : elay coil MCa : magnetic contact POC a

Motor

ON

OFF MC

MCa contact

The "On and Off" switch in the figure is the one of Note the motor. When motor temperature rises, the contact of the thermal protector will release and the current will be cut through MC .When motor temperatrure drops, the contact of the thermal protector will return automatically. In the wiring of this figure, motor will not run unless you push the push phone of the "On" side.

E24

For more details, ask our sales office nearest to you or our CS center.

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E25

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Inertia Moment of Gearmotor


Iertia Moment I {GD2} of GTR Gearmotor
Value according to Capacity and Frame Number
Inertia Moment I {GD2} of Gearmotor (Motor + Reducer) (value converted at the motor shaft) GTR Mini Series G/F/F2 Type Gearmotor<with motor>/Brake Gearmotor Water-resistant Gearmotor<with motor>/Water-resistant Brake Gearmotor
2 Unit: Inertia Moment Ikg m2 GDkgf m2

Table-8
400V

No. of Phase

Type/Frame Number G-Type Frame G-12 Frame G-22 Frame G-15 Frame G-28 Frame G-32 Frame G-18 Frame G-40 H-Type Frame H-15 Frame H-22 Frame H-18 Frame H-28 Frame H-32 Frame H-40 F2-Type

Capacity W 15

Gearmotor/Water-resistant Gearmotor 200V 0.00005 0.00020 0.00006 0.00023 0.00007 0.00029 0.00008 0.00033 0.00008 0.00030 0.00008 0.00030 0.00010 0.00040 0.00012 0.00049 0.00034 0.00136 0.00034 0.00136 0.00034 0.00136 400V 0.00006 0.00023 0.00006 0.00023 0.00008 0.00033 0.00008 0.00033 0.00008 0.00030 0.00008 0.00030 0.00012 0.00049 0.00013 0.00053 0.00034 0.00136 0.00034 0.00136 0.00034 0.00136

Gearmotor with Brake/Water-resistant Gearmotor with Brake 200V 0.00007 0.00028 0.00008 0.00031 0.00009 0.00037 0.00009 0.00037 0.00010 0.00038 0.00010 0.00038 0.00012 0.00048 0.00014 0.00057 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144

0.00008 0.00031 0.00008 0.00031 0.00009 0.00037 0.00009 0.00037 0.00010 0.00038 0.00010 0.00038 0.00014 0.00057 0.00014 0.00057 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144

Frame F2S-12

Frame F2F-15

25 40 60 25

3-Phase

Frame F2S-15

Frame F2F-18

40 60 90 40 60 90

Note) 400V is not available in Water-resistant Gearmotor/Brake Gearmotor.


2 Unit: Inertia Moment Ikg m2 GDkgf m2

Table-9
200V

No. of Phase

Type/Frame Number G-Type Frame G-12 Frame G-22 Frame G-15 Frame G-28 Frame G-32 Frame G-18 Frame G-40 H-Type Frame H-15 Frame H-22 Frame H-18 Frame H-28 Frame H-32 Frame H-40 F2-Type

Capacity W 15

Gearmotor/Water-resistant Gearmotor 100V 0.00005 0.00020 0.00006 0.00023 0.00008 0.00033 0.00008 0.00033 0.00008 0.00030 0.00010 0.00040 0.00013 0.00053 0.00013 0.00053 0.00034 0.00136 0.00034 0.00136 0.00035 0.00140 200V 0.00005 0.00020 0.00006 0.00023 0.00008 0.00033 0.00008 0.00033 0.00008 0.00030 0.00010 0.00040 0.00013 0.00053 0.00013 0.00053 0.00034 0.00136 0.00034 0.00136 0.00035 0.00140

Gearmotor with Brake/Water-resistant Gearmotor with Brake 100V

0.00007 0.00028 0.00007 0.00028 0.00008 0.00031 0.00008 0.00031 0.00009 0.00037 0.00009 0.00037 0.00009 0.00037 0.00009 0.00037 0.00010 0.00038 0.00010 0.00038 0.00012 0.00048 0.00012 0.00048 0.00014 0.00057 0.00014 0.00057 0.00014 0.00057 0.00014 0.00057 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144 0.00036 0.00144

Frame F2S-12

Frame F2F-15

25 40 60 25

1-Phase

Frame F2S-15

Frame F2F-18

40 60 90 40 60 90

Note) 200V is not available in Water-resistant Gearmotor/Brake Gearmotor.

E26

Technical Information

GTR Mini Series GT TypeGearmotor<with motor>/Brake Gearmotor


2 Unit: Inertia Moment Ikg m2 GDkgf m2 Table-10

No. of Phase

Type/Size

Capacity W 15 25 40 60

Gearmotor 200V 0.00006 0.00023 0.00007 0.00029 0.00010 0.00040 0.00012 0.00049

Gearmotor with Brake 200V 0.00008 0.00031 0.00009 0.00037 0.00012 0.00048 0.00014 0.00057
2 Unit: Inertia Moment Ikg m2GDkgf m2

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

GT-8 3-Phase GT-9

Table-11

No. of Phase

Type/Size

Capacity W 15 25 40 60

Gearmotor 100V 0.00006 0.00023 0.00007 0.00029 0.00012 0.00049 0.00013 0.00053 200V 0.00006 0.00023 0.00007 0.00029 0.00012 0.00049 0.00013 0.00053

Gearmotor with Brake 100V 0.00008 0.00031 0.00009 0.00037 0.00014 0.00057 0.00014 0.00057 200V 0.00008 0.00031 0.00009 0.00037 0.00014 0.00057 0.00014 0.00057

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

GT-8 1-Phase GT-9

With Waterresistant Brake Motor

GTR-L Series G TypeGearmotor<with motor>/Brake Gearmotor


2 Unit: Inertia Moment Ikg m2GDkgf m2

Table-12

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

No. of Phase

Type/ Capacity Frame Number W Frame G-12 15 25 25 40

Gearmotor 200V 0.00005 0.00020 0.00006 0.00023 0.00008 0.00030 0.00008 0.00030 400V 0.00006 0.00023 0.00006 0.00023 0.00008 0.00030 0.00008 0.00030 200V

Gearmotor with Brake 400V 0.00008 0.00031 0.00008 0.00031 0.00010 0.00038 0.00010 0.00038

Gearmotor with Brake

0.00007 0.00028 0.00008 0.00031 0.00010 0.00038 0.00010 0.00038

3-Phase Frame G-15

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

2 Unit: Inertia Moment Ikg m2GDkgf m2

Table-13

No. of Phase

Type/ Capacity Frame Number W Frame G-10 6 10 15 25 25 40

Gearmotor 100V 0.000015 0.000060 0.000015 0.000060 0.000050.00020 0.000060.00023 0.000080.00030 0.000100.00040 0.000015 0.000060 0.000050.00020 0.000060.00023 0.000080.00030 0.000100.00040 200V 100V

Gearmotor with Brake 200V

0.000019 0.000074 0.000019 0.000074 0.000070.00028 0.000080.00031 0.000100.00038 0.000120.00048 0.000019 0.000074 0.000070.00028 0.000080.00031 0.000100.00038 0.000120.00048

1-Phase

Frame G-12 Frame G-15

Standard Motors

Cautions for Safety

Option

E27

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Inertia Moment of Gearmotor


Value according to Capacity and Frame Number
Inertia Moment I {GD2} of Gearmotor with Clutch/Brake(clutch/brake part) GTR Mini Series G-TypeGearmotor with Clutch/Brake
2 Unit: Inertia Moment Ikg m2 GDkgf m2 Table-14

No. of Phase

Type/ Capacity Frame Number W Frame G-12 Frame G-15 15 25 15 25 50 15 Frame G-18 25 50 90

200V 0.00041 0.0016 0.00041 0.0016 0.00092 0.0037 0.00092 0.0037 0.00092 0.0037 0.00100 0.0040 0.00100 0.0040 0.00100 0.0040 0.00100 0.0040

3-Phase 1-Phase

E28

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E29

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GearmotorWith motor Wiring/Terminal Box


Wiring chart
3-Phase Motor
Forward R U V W

1-Phase Motor

Power S source
T

Motor Power source

MS

Forward C Reverse

1 2 3

Motor

Reverse Mark in the Diagram U V W Lead Wire Type 200V 400V black grey White black brown White Terminal Box Type Terminal Code U V W Mark in the Diagram 1 2 3 Lead Wire Type 100V 200V blue black grey brown black grey Terminal Box Type Terminal Code 1 2 3

The rotation direction of the output shaft is shown in the performance table of respective model.

Capacitor
For operations of 1-phase moter, capacitor is needed. Utilize the capacitor attached with products with proper wiring. Since reversible wiring (3 lead wires) is applied in the 1-phase motor, forward and reverse rotations are easily changed like a 3-phase motor.
w d 10 h 4.3 4 t

Withstand Capacity Voltage F 2.5 3.5 4.5 5 6 7 8 220V 9 10 12 13 14 15 20 26

w 31 31 31 31 37 37 38 38 48 48 48 58 58 58 58

h 23.5 23.5 27 27 27 27 29 29 29 29 29 31 31 35 37

t 14.5 14.5 17 17 18 18 19 19 19 19 19 21 21 22 23.5

d 24.5 24.5 27 27 28 28 29 29 29 29 29 31 31 32 38.5 7 4.5

Input power supply

Withstand Capacity Voltage F 1 1.2 1.5 1.7 2 440V 2.2 2.5 3 3.2 3.5 5 6.5

w 31 37 38 38 48 48 48 58 58 58 58 58

h 27 27 31 31 29 29 31 31 31 31 37 41

t 17 18 21 21 19 19 21 21 21 21 23.5 29

d 27 28 31 31 29 29 31 31 31 31 38.5 44 7 4.5

Input power supply

200V

100V

For the capacitor volume, refer to the respective performance table.

E30

Technical Information

Terminal Box
As terminal box can be attached to GTR Mini-Series and GTR-L Series, instruct us when ordering.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

Types and Structures


T-Type Terminal Box 3-Phase 200V 400V 1-Phase 100V 200V
The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 6- 8 50
V 2

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

32.5

Terminal Block

K-Type Terminal Box 3-Phase 200V 400V 1-Phase 100V 200V


The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28
W 3

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

50

46.5

Terminal Block

With Waterresistant Brake Motor Speed Control Gearmotor

GTR Mini Series

GTR-L Series

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E31

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Simplified Brake Reversible Gearmotor


Gearmotor with Simplified Brake
As simplified brakes(optional parts) can be attached to GTR Mini Series Gearmotors, instruct us when ordering.
1 A simplified braking mechanism is installed in order to

Specifications(Guideline values)
Frame G-12 22 H-15 22 F2S-12 F2F-15 G-15 28 32 H-18 28 32 F2S-15 F2F-18 G-18 40 H-40 Capacity 15W 25W 40W 60W 25W 40W 60W 90W 40W 60W 90W 7.4 750 5.9 600 2.9 300

Table-15

minimize motor's coasting ratation. 2 This mechanism can be produced both for 3-phase and for single-phase. 3 The retaining torques are as shown in the Table-15. When required strong retention, select brake gearmotors. 4 The machine is 30 minutes-rating.

Retaining Torque Overrun N cm gf cm Rotation Speed

35

35

1015

Values in "Overrun" column are the ones at no load.

Reversible Gearmotor
Reversible Gearmotors(optional) can be applied to GTR-L Sereis gearmotors (with motor).
1 Although all the products of 1-phase motor are originally

Specifications(Guideline values)
Frame 10 12 15 Capacity 6W 10W 15W 25W 25W 40W

arranged wiring for reversible operation, the "Reversible Gearmotor" is the one installed with simplified braking mechanism which improves the instant reverse operation. 2 The retaining torques are as shown in the Table-16. When required strong retention, select brake gearmotors. 3 The machine is 30 minutes-rating. Torque Rotation Speed Characteristics
Torque for 60Hz

Table-16

Overrun Retaining Torque N cm gf cm Rotation Speed 0.7 70 1.4 140 2.0 200 23 34 35

Values in "Overrun" column are the ones at no load.

Capacitor
For operations of Reversible gearmotor, capacitor is needed. Utilize the capacitor attached with products with proper wiring. Since reversible wiring (3 lead wires) is applied in the 1-phase motor, forward and reverse rotations are easily changed like a 3-phase motor. For the volume of capacitor, refer to the performance table. For shape and dimension, refer to P. E30.

rs Reve

ible

ase 1-Ph

100

Allowable Torque

1600 1800 Rotation Speed rpm

Shown above is a representative torque-curve. When details of the torque-carve are required, ask us.

E32

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E33

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Brake


Brake Specifications

Specifications/Structure/Wiring

GTR Mini SeriesG GT H F2-Type


For gearmotors with water-resistant brake, refer to <P. E44>. Motor Item Brake Type Rated Torque Nm (kgfm) <15001800rpm> Voltage (Average) Power (75) Current (at 75) Allowable Work Emax J (kgf m) Allowable Braking Frequency 0.37 0.038 DC90V 12W 0.13A
7 2.9103106

Table-17
1-Phase 100V 15W 25W 40W 60W 90W 90W

3-Phase 200V 400V 1-Phase 200V 15W 25W 40W 60W

"Power-off, Brake-on" (Spring Close) Type 0.54 0.055 0.37 0.038 DC45V 10W 0.22A 0.54 0.055

10 times per minute

GTR-L SeriesG-Type
Motor Item Brake Type Rated Torque Nm (kgfm) <15001800rpm> Voltage (Average) Power (75) Current (at 75) Allowable Work Emax J (kgf m) Allowable Braking Frequency 0.22 0.022 DC90V 4.5W 0.05A 3-Phase 200V 400V 15W 25W 40W 6W 1-Phase 100V 10W 15W 25W 40W 10W 15W

Table-18
1-Phase 200V 25W 40W

"Power-off, Brake-on" (Spring Close) Type 0.16 0.016 0.22 0.022 DC45V 5.0W 0.11A
7 1.5101.5106

0.16 0.016

0.22 0.022 DC90V 4.5W 0.05A

10 times per minute

Guideline values of allowable braking frequency for avoiding excessive motor temperature rise are given above. Braking frequency can be Note 1 increased under light loads or where cooling of motor is sufficiently enough. (Be sure to maintain the motor surface temperature below 90.) Avoid continuous energizing to the brake coil while the motor stops. 2 Use the attached standard rectifier for the brake power supply. If another type of rectifier is to be used, consult us. 3 The values of rated torque are guidelines and not the guaranteed values. 4

Brake Structure
GTR Mini SeriesG GT H F2-Type
3 2 6 1 1 Field 2 Armature 3 Fan/Friction disc 4 Spring 5 Setscrew 6 Hexagon socket head bolt 5 7 Fan Cover 8 Fan Cover Fixing Screw

GTR-L SeriesG-Type
5 4 3 2 1

1 Field 2 Hexagon socket head bolt 3 Friction Disk Assembly 4 Hexagon socket head

locking screw
5 Brake Cover 6 Armature 7 Spring 8 Brake Cover Fixing Screw

gap Correct value 0.4 (inhalable value: less than 0.8)


4

gap Correct value 0.2 (inhalable value: less than 0.8)

For gearmotors with water-resistant brake, refer to <P.E45>

E34

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E35

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Brake


Wiring DC Switching AC Switching (A) AC Switching (B)

Wiring

Types of Wiring and Selecting Points


Selecting Point
Because of the shortest braking delay time, most appropriate for the application which needs sudden braking such as hoisting operation. Separate circuit can be employed for motor and brake. Therefore, most appropriate for inverter drive operation. This is the simplest way. Operation can be done only by connecting to the power source. You can save wiring.

Inverter Usable

Hoisting Operation Optimum

Wire Saving

Braking Delay

Usable Optimum Unusable Unusable

Braking delay time indicates interval between switching off and brake on. (Not the braking time.) Note For braking delay time by wiring method, refer to Table-19 on page E37. In case braking time is needed, refer to the calculation method on page E10.

Wiring Method Standard Voltage


No. Motor Capacity Designation 3-Phase T15T90
Forward

Motor Capacity Designation 1-PhaseS06S90

R Power source S T
White Yellow

U V W

MS

Forward
S

Motor

Power source
White

Blue C Black Glay

Reverse
Yellow

Motor

1.DC Switching
Forward Reverse

Rectifier A200-D90
A100-D45
Blue Blue Red Black

Reverse
Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red Black

Brake

Red Red

Brake

Forward

R Power source S T

U V W

MS

Forward
S

Motor

Power source

Blue C Black Glay

Reverse
Yellow White

Motor

Forward Reverse
Yellow White

2.AC Switching(A)

Reverse

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red Black Red Red

Brake

Brake
Blue for Rectifie Blue should be short circuited.
Forward
S

Blue for Rectifie Blue should be short circuited.


Forward

R Power source S T

U V W

MS

Motor

Power source
Yellow

Blue C Black

Reverse Glay
White

Motor

3.AC Switching(B)
Reverse

Yellow

White

Rectifier A200-D90
A100-D45
Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red Black Red Red

Blue Blue Red Black

Brake

Brake
Blue for Rectifie Blue should be short circuited.

Blue for Rectifie Blue should be short circuited.

S: Rotation Changeover SwitchC: CapacitorMS: Electro-Magnetic Switch N : Surge Suppressor (option) Note 1 the application of vertical motion such as lifting, DC Switching wiring should be employed. For 2 is recommended to insert surge suppressor between contact points in DC Switching circuit. (Varistor Voltage 423517V) It 3 case of single-phase 100V, the voltage applied to the input side of the rectifier A200-D90 (A100-D45) will be AC100V and the output side, In DC45V. 4 The electro-magnetic switch with the rated current of over 6A(AC200V) is recommended for the relay for brake circuit. In case DC Switching wiring is employed, in order to sield the inductive load (DC coil), DC110V, DC13 class is recommended. Also, in case of employing a noncontact relay, it is recommended to use the rated voltage of AC240V equivalent (half-wave rectification switching available). 5 Since the rectifier contains diodes, improper wiring may cause fatal short-circuiting. Therefore, special care should be given to the wiring. 6 wirings and cautions in case of inverter drive, refer to page E76. For

E36

Technical Information

Wiring Method High Voltage


No. Motor Capacity Designation 3-Phase T15WT90W
Forward

Motor Capacity Designation 1-PhaseS10WS90W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Power R source S T

U V W

Motor

MS Power source
White

Forward
S

Brown C Black

Red Red

Reverse Glay
Yellow

Motor

Waterresistant Gearmotor with Brake Speed Control Gearmotor

1.DC Switching

White Yellow

Reverse

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

Forward Reverse

Brake

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

Brake
Forward

R Power source S T

U V W

Motor
Red Red

MS Power source

Forward
S

Brown C Black Glay

Reverse
White Yellow

Motor

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

2.AC Switching(A)
White Yellow

Reverse Forward

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

Blue for Rectifie Blue should be short circuited. Power R source S T

Rectifier A200-D90
A100-D45
Blue Blue Red Black

Reverse
Blue Blue

Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Brake

Blue for Rectifie Blue should be short circuited.


Forward
S

Forward

U V W

Motor

MS Power source
White

Brown C Black

Reverse Glay
Yellow

Motor

Red Red

3.AC Switching(B)

Reverse

White Yellow

Rectifier A200-D90
A100-D45
Blue Blue Red Black

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

With Waterresistant Brake Motor

Brake
Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Blue for Rectifie Blue should be short circuited.

Blue Blue

Brake

Blue for Rectifie Blue should be short circuited.

S: Rotation Changeover SwitchC: CapacitorMS: Electro-Magnetic Switch N : Surge Suppressor (option) Note 1 For the application of vertical motion such as lifting, DC Switching wiring should be employed. 2 is recommended to insert surge suppressor between contact points in DC Switching circuit. (Varistor Voltage 423517V) It 3 The electro-magnetic switch with the rated current of over 6A(AC200V) is recommended for the relay for brake circuit. In case DC Switching wiring is employed, in order to sield the inductive load (DC coil), DC110V, DC13 class is recommended. Also, in case of employing a noncontact relay, it is recommended to use the rated voltage of AC240V equivalent (half-wave rectification switching available). 4 Since the rectifier contains diodes, improper wiring may cause fatal short-circuiting. Therefore, special care should be given to the wiring. 5 for the 3-phase/double voltage model or over 230V model, be sure to connect 200V leads(red, 0.752.2kW for B terminal), which are AS extended out from the motor for the brake supply, to the input of rectifier. In case of the operation by inverter drive, the 200V terminal extended out from the motor is not feasible. For details, contact us. For cautions in case of inverter drive, refer to page E76.

Standard Motors

Cautions for Safety

Braking Delay Time : ta


Braking delay time indicates interval (second) between switching off and brake on. Not the braking time. Table-19
No. 1.DC Switching 2.AC Switching(A) 3.AC Switching(B) Braking Delay Time ta second 0.0050.015 0.030.10 0.10.2

Option

E37

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Brake


Rectifier

Rectifier/Surge Suppressor/Terminal Box


A200D90 Dimension Diagram
A100D45
56 Input Side Output Side 10 36 10

The supplied rectifier A200-D90 (A100-D45) or A100-D90 is required for the brake operation of the gearmotor with brake. Since the braking delay time differs according to the brake wiring, select the most appropriate wiring method for the application, referring to page E36E37. The rectifier basically contains a surge absorber. However, if a risk is foreseen, add another surge absorber or noise filter for safety sake.

Yellow

R5

26 White 46 200 150

Blue Blue Red Black

17 4.5

2.5

Surge Suppressor/Option No. OP-ENE471D-10A


For use in cutting off the sparks of a brake switch for DC switching or AC line switching.

max14

max7.5

max17

0.8 30

7.51

3.91

E38

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E39

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Brake


Types and Constructions

Terminal Box Option

Terminal box can be attached to GTR Mini-Series and GTR-L Series. Instruct us when ordering.

T-Type Terminal Box 3-Phase 200V 400V 1-Phase 100V 200V


The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 6- 8 50

32.5

Terminal Block

K-Type Terminal Box 3-Phase 200V 400V 1-Phase 100V 200V


The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28 50

46.5

Terminal Block

C- Type Terminal Box (Rectifier built-in) 3-Phase 200V 400V


The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28 62

51.5

1-Phase 100V 200V


The photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28 62

51.5

Earth terminal

E40

Technical Information

C-Type Terminal Box built in rectifier Wiring Types, Specifications and Selecting Points
Wiring Specs. and Selecting Points Inverter 3-Phase Hoisting Operation Wire Saving Braking Delay
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Note 1"braking delay time" means the time from turn off switch to start braking motion, not the total time for braking. For braking delay time cause of wiring method, please reter to page E237chart-19. Please reter to calculated data according to page E10. 2In case of inverter drive, "AC Switching(B)" wiring and "DC Switching" wiring are not feasible, while "AC Switching(A)" wiring is feasible. (Custom specs.) However, the lead wire 200V terminal extended out from the motor body cannot be used. Contact us for details. For cautions for inverter drive, refer to page E76.

Rated Current
The rated current values listed on the motor performance table on page E14E22 are the ones for motor itself. For rectifier built-in type terminal box, the current value through brake should be taken into account. For details, consult us.

AC Switching(B) DC Switching AC Switching(A) Independent Rectifier

C-Type terminal box contains built-in rectifier and is connected in "AC Switching(B)". Therefore, just connect power supply source to the terminals for start operation. Also you can modify to "DC Switching" by just taking off the connecting plate.

Unusable

Unusable

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

Because of the shortest braking delay time, This is appropriate for the application which needs sudden braking such as hoisting operation.

Unusable

Optimum

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Separate circuit can be employed for motor and brake. Therefore, most appropriate for inverter drive operation. Wiring with 200V supply is appropriate for the standard voltage. As for the double voltage supply, use the 200V terminal (red lead wire) which is extended out from the motor. (Not fixed to the terminal block.) Since the AC Switching(A) wiring is a custom specification, direct us when ordering.

Optimum

Usable

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

The brake lead wire is taken into the terminal box and fixed in the terminal block. Rectifier is not built-in. Any wiring can be feasible according to the customer's specification, for example, putting the rectifier within the switchboard, etc. As for the double voltage supply, use the 200V terminal (red lead wire) which is extended out from the motor. (Not fixed to the terminal block.) Since the model with independent rectifier is a custom specification, direct us when ordering. As the rectifier is attached, select the most appropriate wiring method, referring the wiring diagram on page E36.

Application differs according to the wiring method in the switchboard of the rectifier. (AC Switching(A), AC Switching (B) or DC Switching)

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E41

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Brake


Wiring

Built-in Rectifier Terminal Box

Wiring Method for C-Type Terminal Box(3-Phase)


3-Phase
Standard Specifications/ High voltage
R

AC Switching(B) DC Switching AC Switching(A) (Specific wiring) Independent Rectifier (Specific wiring)

Forward U V W SWITCH Connection Plate Reverse


U

Power source S T

V W SWITCH

Standard Specifications/ High voltage


Forward R Power source S T Forward Reverse Reverse U V W SWITCH
U V W SWITCH

Standard Specifications
R Power source S T

Forward U V W AC AC Forward Reverse Reverse


U V W AC AC

High voltage
R

Forward U V W AC AC
U

Power source S T

V W AC AC

200V lead wires from motor coil

Reverse

Forward Reverse

Red

200V lead wires

Red from motor coil

Standard Specifications
R Power source S T

Forward U V W B1 B2
White Reverse
U V

Forward Reverse
Yellow

W B1 B2

A100-D45

Rectifier A200-D90

Blue Blue Red Black

The diagram shown is for AC Switching (A).


Forward

High voltage

R Power source S T

U V W B1 B2 Reverse

U V W B1 B2

200V lead wires from motor coil

White

Yellow

Forward

Red Red

A100-D45

Rectifier A200-D90

200V lead wires from motor coil

Reverse

Blue Blue Red Black

The diagram shown is for AC Switching (A).

E42

Technical Information

Wiring Method for C-Type Terminal Box(1-Phase)


Wiring

1-Phase
Standard Specifications/ High voltage
Power source
Forward

Parallel Shaft Performance Table/ Dimension

AC Switching(B) DC Switching AC Switching(A) (Specific wiring)

MS

S
Reverse

1 2 3 B

Gearmotor with Brake

1 2 3 B SWITCH

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

SWITCH

Connection Plate

Standard Specifications/ High voltage


Power source

MS

Forward

S
Reverse

1 2 3 B

GT-Type Gearmotor with Brake

1 2 3 B SWITCH

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

SWITCH

With Waterresistant Brake Motor

Standard Specifications/ High voltage


Power source

MS

Forward

S
Reverse

1 2 3 B

Speed Control Gearmotor

1 2 3 B SWITCH

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

SWITCH
Connection Plate

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E43

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Water-Resistant GearmotorWith Motor Water-Resistant Gearmotor with Brake


Characteristics
Gearmotors conform to IP65 of IEC Standard.
Gearhead motor unitary construction Oil seal with dust lip is adopted.

Characteristics/Wiring/ Specifications/Structure
Cabtyre cable outlet. Position can be changed. (For more details, consult us.) (Note)Position not modifiable by customer due to it's construction.

Original water-resistant/ dust-tight fabrication (Disassembling not permissible.)

Suitable for the circumstances where water fly and/or periodical cleaning by water is being done. Stainless steel "IP65" stand for the grade of dust-tight and water-tight. output shaft The first digit "6" indicates "Perfect dust-tight structure" and (SUS420J2) the second digit "5" indicates "Protection from water jet in all Jointed parts are sealed with O-rings. direction". Note) Uses in water or under high-hydrostatic pressure are not permitted.

Low-temperature-rise safety brake (Off brake) Stainless steel external screws

Lead Wire and Wiring


3-Phase Motor R S T Only "with brake" U Black V Grey W White With brake (Blue) With brake (Blue)

Note) For more details of Brake Gearmotor, refer to <P. E46>. 1-Phase Motor A Blue C Black Grey

Power source

Only With brake (Red) "with brake" With brake (Red) Earth Wire Green 2m 2m To reverse the rotation direction, convert from A to B or vice versa.

Earth Wire Green

The rotation direction will be reverse when convert any 2(two) of above U, V or W.

Note 1 The voltage between the capacitor terminals of the 1-phase motor will become nearly twice as much as that in the power source of the motor. Therefore, be sure to insulate wires at the terminals for safety. 2 not damage the lead wire inside when peeling off the outer sheath of cab tyre cable. Do 3 When using the machine in the circumstance where water may spatter during operation, it is recommended to use circuit breaker for safety.

Capacitor
For operations of 1-phase motor, capacitor is needed. Utilize the capacitor attached with products with proper wiring. Since reversible wiring (3 lead wires) is applied in the 1-phase motor, forward and reverse rotations are easily changed like a 3-phase motor. For the volume of capacitor, refer to the performance table. For shape and dimension, refer to P.E30.

Brake Specifications
GTR Mini-Series G H F2 (F2S) Type ( Water-resistant)
Motor Output Shaft Frame Number Item Brake Type Rated Torque Nm (kgfm) <15001800rpm> Voltage (Average) Power (at 75) Current (at 75) Allowable Work Emax J (kgf m) Allowable Braking Frequency 5.6W 0.06A
7 2.5102.5106

Table-20
1-Phase 100V 90W
G-18 H-18 F-15

3-Phase 200V 15W


G-12 H-15 F-12

3-Phase 200V 25W G-15 40W


G-15 G-18 H-18 F-15

1-Phase 100V 25W G-15 40W


G-15 G-18 H-18 F-15

25W
G-12 H-15 F-12

40W
G-12 H-15 F-12

60W
G-15 G-18 H-18 F-15

15W
G-12 H-15 F-12

25W
G-12 H-15 F-12

60W G-18

"Power-off, Brake-on" (Spring Close) Type 0.32 0.033 DC90V 6.5W 0.07A
7 2.9103106

0.72 0.073

0.32 0.033

0.72 0.073 DC45V

5.1W 0.12A
7 2.5102.5106

6.4W 0.14A
7 2.9103106

10 times per minutes

Note 1 Guideline values of allowable braking frequency for avoiding excessive motor temperature rise are given above. Braking frequency can be increased under light loads or where cooling of motor is sufficiently enough. (Be sure to maintain the motor surface temperature below 90.) 2 Avoid continuous energizing to the brake coil while the motor stops. 3 Use the attached standard rectifier for the brake power supply. If another type of rectifier is to be used, consult us. 4 The values of rated torque are guidelines and not the guaranteed values.

E44

Technical Information

Brake Structure
GTR Mini-Series GHF2 (F2S) Type ( Water-resistant)
3 2 8 1 6 1 Field 2 Armature 3 Friction Disk Assembly 4 Spring 5 Setscrew 6 Hexagon socket head bolt 7 Brake Cover 8 Pan-head Screw

Rectifier
The supplied rectifier A200-D90 (A100-D45) or A100-D90 is required for the brake operation of the gearmotor with brake. Since the braking delay time differs according to the brake wiring, select the most appropriate wiring method for the application, referring to page E44. The rectifier basically contains a surge absorber. However, if a risk is foreseen, add another surge absorber or noise filter for safety sake. For the shape and dimension of rectifier, refer to < P. E38 >.

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

gap Correct value 0.3 (inhalable value: less than 0.8)

Surge Suppressor/Option No. OP-ENC471D-10A


For use in cutting off the sparks of a brake switch for DC switching or AC line switching. For the shape and dimension of surge suppressor, refer to < P. E38 >.

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E45

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Water-Resistant Gearmotor with Brake


Types of Wiring and Selecting Points
Wiring DC Switching AC Switching (A) AC Switching (B) Selecting Point
Because of the shortest braking delay time, most appropriate for the application which needs sudden braking such as hoisting operation. Separate circuit can be employed for motor and brake. Therefore, most appropriate for inverter drive operation. This is the simplest way. Operation can be done only by connecting to the power source. You can save wiring.

Wiring

Inverter Usable

Hoisting Operation Optimum

Wire Saving

Braking Delay

Optimum Usable Unusable Unusable

Note Braking delay time indicates interval between switching off and brake on. (Not the braking time.) For braking delay time by wiring method, refer to Table-15 on page E47/Table-21. In case braking time is needed, refer to the calculation method on page E10.

Wiring Method Standard Voltage


No. Motor Capacity Designation 3-Phase T15T90
Forward

Motor Capacity Designation 1-Phase S15S60

R Power source S T
White Yellow

U V W

MS

Forward
S

Motor

Power source
White Yellow

Blue C Black Glay

Reverse

Motor

1.DC Switching
Forward Reverse

Rectifier A200-D90
A100-D45
Blue Blue Red Black

Reverse
Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red

Brake

Black Red Red

Brake

Forward

R Power source S T

U V W

MS

Forward
S

Motor

Power source

Blue C Black Glay

Reverse
White Yellow

Motor

Forward Reverse
Yellow White

2.AC Switching(A)

Reverse

Rectifier A200-D90
A100-D45
Blue Blue Red Black Blue Blue

Rectifier A200-D90
A100-D45
Blue Blue Red Black Red Red

Brake

Brake
Blue for Rectifie Blue should be short circuited.
Forward
S

Blue for Rectifie Blue should be short circuited.


Forward

R Power source S T

U V W

MS

Motor

Power source
Yellow

Blue C Black Glay

Reverse
White

Motor

3.AC Switching(B)
Reverse

Yellow

White

Rectifier A200-D90
A100-D45
Blue Blue

Rectifier A200-D90
A100-D45
Red Red

Blue Blue Red Black

Brake

Brake
Blue for Rectifie Blue should be short circuited.

Blue for Rectifie Blue should be short circuited.

S: Rotation Changeover SwitchC: CapacitorMS: Electro-Magnetic Switch N : Surge Suppressor (option) Note 1 the application of vertical motion such as lifting, DC Switching wiring should be employed. For 2 is recommended to insert surge suppressor between contact points in DC Switching circuit. (Varistor Voltage 423517V) It 3 case of single-phase 100V, the voltage applied to the input side of the rectifier A200-D90 (A100-D45) will be AC100V and the output side, In DC45V. 4 The electro-magnetic switch with the rated current of over 6A(AC200V) is recommended for the relay for brake circuit. In case DC Switching wiring is employed, in order to sield the inductive load (DC coil), DC110V, DC13 class is recommended. Also, in case of employing a noncontact relay, it is recommended to use the rated voltage of AC240V equivalent (half-wave rectification switching available). 5 Since the rectifier contains diodes, improper wiring may cause fatal short-circuiting. Therefore, special care should be given to the wiring. 6 wirings and cautions in case of inverter drive, refer to page E76. For

E46

Technical Information

Braking Delay Time : ta


Braking delay time indicates interval (second) between switching off and brake on. Not the braking time. Table-21
No. 1.DC Switching 2.AC Switching(A) 3.AC Switching(B) Braking Delay Time ta second 0.010.02 0.050.15 0.10.2
Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E47

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Open space size necessary for taking off the Motor Fan Cover and Brake Cover
The values indicated below are necessary open sizes for doing brake gap adjustment of the installed motor. These are the open space sizes needed for taking off the fan cover from the installed motor. When you consider ventilation, add more than 20mm to each value.

GTR Mini Series Indoor Specification


46

GTR Mini Series Water-Resistant Specification


35

GTR-L Series
32

E48

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E49

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Terminal Box Measure and position


Terminal Box for GTR Mini Series

Gearmotor/Gearmotor with Brake in common

Terminal box is not attached in the standard product. Terminal box can be attached when requested. Instruct us when ordering.

T-Type Terminal Box


B A 50

32.5 C

Model Type G H F2 F2S F2 F2F G H F2 F2S F2 F2F G H

Frame No. 12 22 15 22 12 15 15 32 28 18 32 28 15 18 18 40 40

11.5

49.5

70.5

11.5

48

77.5

11.5

48.5

85.5

Note 1 indicates dimension without fan while "B" indicates the one with fan. "A" 2 for the details for GT-Type and GTR-L Series, ask us when needed. As

E50

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

Technical Information

K-Type Terminal Box

B A

50

46.5 C

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Model Type G H F2 F2S F2 F2F G H F2 F2S F2 F2F G H

Frame No. 12 22 15 22 12 15 15 32 28 18 32 28 15 18 18 40 40

C
Gearmotor with Brake

11.5

49.5

84.5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake

11.5

48

91.5

11.5

48.5

99.5

Speed Control Gearmotor with Brake Technical Information

Note 1 indicates dimension without fan while "B" indicates the one with fan. "A" 2 for the details for GT-Type and GTR-L Series, ask us when needed. As

Standard Motors

Cautions for Safety

Option

E51

Parallel Shaft Performance Table/ Dimension

Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Terminal Box Measure and position


C-Type Terminal Box

Gearmotor with Brake only

62

51.5 B

Model Type G H F2 F2S F2 F2F G H F2 F2S F2 F2F G H

Frame No. 12 22 15 22 12 15 15 32 28 18 32 28 15 18 18 40 40

49.5

89.5

48

96.5

48.5

104.5

Note 1 for the details for GT-Type, Speed Control Gearmotors and GTR-Lseries, As ask us when needed.

E52

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E53

Technical Information

Position of Lead wire/ Terminal box/Cab tyre cable


Lead wire type of GTR Mini Series/GTR-L Series Direction method when modifying the position of terminal box/cab tyre cable:
In case of using lead wire/terminal box/cab tyre cable(water-resistant specification) on the position other than standard position, direct us with the code shown in the below.

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Direction Method
Indoor Standard Type
Lead wire type/With terminal box Modification of lead wire box position
Box

Water-resistant type
Cab tyre cable type Modification of cable position and cable inlet position

G-Type

Anti-load side

Load side

H-Type
Standard Standard Hole(Load-side)

Standard

Standard

H3

Anti-load side

Load side

T (lower)

T (lower)

T (lower) Hole (Load-side)

T6

T6

T6 H3

All Note 1 the diagrams show the profile viewed from anti-load side of the motor. No 2 need to direct us when you order standard product. Since the T-Shaft of F2S (hollow shaft) and that of F2F (solid 3 shaft) is symmetric (double shaft mount), no need to direct us about the positioning.

Meanings of designation 1"T" indicates "Terminal Box". 2 "Hole" indicates "Power supply inlet".

Lead wire type of GTR Mini Series F2 Type Direction method when modifying the position of terminal box:
The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1",then rotate the shaft 180 In such case, indicateT6 when you order. Same method can be applied to the product with terminal box.

Figure viewed from motor-side


In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

E54

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E55

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Characteristics/Terminal Box (with brake)


Features and Characteristics
Speed control gearmotor which enables to select speed freely in the wide range of speed, 501400rpm(50Hz) or 501700rpm(60Hz) through the exclusive speed controller, by attaching the Rate Generator(AC generator) for speed detection to the motor part of gearmotor.
Torque Limit line for use (Critical area for motor temperature rise in the continuous operation.) This indicates the variation of rotation speed according to the load variation when set to N rotation at no load condition. (Load variability rate is about 3%.)

Speed Control Gearmotor

Characteristics
1 Wide speed range
Power source frequency Speed range
100%

With Nissei's exclusive 501400rpm 50Hz circuit design, continuous 501700rpm 60Hz acceleration from the low speed revolution - 50rpm, can be obtained. 2 Excellent output characteristics Secured high allowable load torque value at low revolution range, and also secured wide range of high revolution as seen in the diagram on the right. 3 Wide variety of model There are roughly 8 types available according to the purpose, that is, 2 types (100V, 200V) in U-Type connectable by lead wire with connector, and 6 types (100V, 200V) in P-Type which is plug-in type.

Range of possible continuous operation

50rpm

Rotation speed rpm High speed rotation range

In the speed control gearmotor, same rotation speed can be obtained even in the defferent power source frequency. For example, the rotation speed set up at the 50Hz area, will never vary and the same rotation speed can be obtained in the 60Hz area. (Within the range of the highest rotation speed of 1400rpm and less.)

Terminal Box (with motor)

Terminal box can be attached to GTR Mini Series, GTR-L Series and Speed Control Gearmotor P-Type. Instruct us when ordering.

Types and Constructions (Limited to P-Type)


C-Type Terminal Box For wiring, refer to < P. E67 Table-22 >. 1-Phase 100V 200V (GTR Mini Series 15W40W, GTR-L Series 6W40W)
Photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28 62

51.5

C-Type Terminal Box For wiring, refer to < P. E67 Table-22 >. 1-Phase 100V 200V (GTR Mini Series 60W 90W)
Photo indicates the case of GTR Mini Series. M3.5 Terminal Screws Applicable Code 7- 11 28 62

51.5

Earth terminal

E56

Note) The lead wire for the forced fan is taken out from the outside of terminal box and conneced to the terminal.

Technical Information

Specifications/Structure/Terminal Box(with brake) GTR-L Series only


In GTR-L Series, Speed Control Gearmotor with electromagnetic brake is also available. Brake Specifications (GTR-L Series only)
Motor 100V Item Brake Type Rated Torque Nm (kgfm) <15001800rpm> Voltage (Average) Power (75) Current (at 75) Allowable Work Emax J (kgf m) Allowable Braking Frequency 0.16 0.016 6W 10W 15W 25W 40W 10W 1-Phase 200V 15W 25W 40W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

"Power-off, Brake-on" (Spring Close) Type 0.22 0.022 DC45V 5.0W 0.11A
7 1.5101.5106

0.16 0.016

0.22 0.022 DC90V 4.5W 0.05A

10 times per minute

Guideline values of allowable braking frequency for avoiding excessive motor temperature rise are given above. Braking frequency can be Note 1 increased under light loads or where cooling of motor is sufficiently enough. (Be sure to maintain the motor surface temperature below 90.) Avoid continuous energizing to the brake coil while the motor stops. 2 The values of rated torque are guidelines and not the guaranteed values. 3

With Waterresistant Brake Motor Speed Control Gearmotor

Brake Structure
5 4 3 2 1

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

1 Field 2 Hexagon socket head bolt 3 Friction Disk Assembly 4 Hexagon socket head

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

locking screw
5 Brake Cover 6 Armature 7 Spring 8 Brake Cover Fixing Screw

gap Correct value 0.2 (inhalable value: less than 0.8)

Standard Motors

Cautions for Safety

Rectifier
The supplied rectifier A200-D90( A100-D45) is required for the brake operation of speed control gearmotor with brake. Rectifer A200-D90( A100-D45) includes surge suppressor, but please use extra surge suppressor or noise filter. For the shape and dimension of rectifier, refer to < P. E38 >.

Option

E57

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Terminal Box (with brake) GTR-L Series only


Terminal Box (with brake)
C-Type terminal box can be attached to GTR-L Series, Speed Control Gearmotor P-Type. Since rectifier is built-in in C-Type terminal box, instruct us when ordering.

Speed Control Gearmotor

Types and Constructions (limited to P-Type with brake)


C-Type Terminal Box 1-Phase 100V 200V For wiring, refer to < P. E71 Table-23 >.

M3.5 Terminal Screws

Applicable Code 7- 11 28 62

51.5

Earth terminal

E58

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E59

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Speed Control Gearmotor Controller


Specifications
Type Product Name Motor Capacity GTR Mini Series GTR-L Series Single-Phase Power Source Voltage Variable Speed Range Rate of Variability Instant Stopping Slow Start Slowdown Parallel Run Descent Run Remoto Control Distance Shape Ambient Temperature 3 5m Control Box Type 100V U-Type SCU-100 SCU-200 SCP-101L SCP-201L SCP-102L P-Type SCP-202L SCP-103L SCP-203L

1590W 640W 200V 100V

1590W 640W 200V 100V

1590W 640W 200V

1590W 640W 100V 200V

501400rpm 50Hz 501700rpm 60Hz 3 50m 3 50m Plug-in Type 8-pin 1040 3 200m

Only 100V is available in 6W. Note 1 Note) The rotation speed of motor shaft has been set at 1400rpm (U-Type: at the position of "HIGH" in the volume of the speed controller, 2 P-Type: at the position of "100" in the volume of external speed setter) as the maximum value when shipping from our factory. In case of modifying the speed variation range, adjust the switch of built-in speed setter (trimmer resistance). In case of C-Type, be sure to take off the capacitor at the reverse side of controller, before adjusting. (See the diagram below.) In 3 case of purchasing the controller unit only for repairing, etc., setting the maximum rotation speed may be needed. Be sure to operate with the motor shaft rotation speed of below 1400rpm (50Hz) and 1700rpm (60Hz). "Remoto Control Distance" means the conductor length between controller and motor or controller and external speed setter when power 4 source line (Pin No. ) and signal line (Pin No. ) is wired separately. Be 5 sure to note that speed control is not feasible in the descent run.

Trimmer

Volume

orange color Blue

CW The case of capacitor off.

Capacitor

Black CCW

On/Off Switch
Lead wire (600mm) with connector

AC Plug with code(2m) in 100V use

Lead wire(0.5m) in 200V use

Controller surface

Reverse face of controller

E60

Technical Information

Types
U-Type
All the necessary devices such as speed control circuit, capacitor, speed setter, etc. are pre-assembled in the controller and ready to operate by just connecting with the connecter lead wire. Available only for variable speed function.
U-Type motor part (GTR Mini Series)
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor

P-Type
This is an "8-pin plug-in" type which enables you to set up the rotation speed of gearmotor by the speed setter in the front face. Other than variable speed, this type has functions such as instant stopping, slow start-slowdown, parallel run, etc. Selectable by purpose.
P-Type motor part (GTR Mini Series)

Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

U-Type
SCU-100SCU-200

Functions
1 Variable speed function only 2 Separate Type/ Connect with lead wire with connector AC Plug with code attached (100V only) 3 For Single-Phase 100V, 200V/100V only in 6W. 4 Motor Capacity/ GTR Mini-Series 1590W GTR-L Series 640W 5 All the necessary devices such as speed control circuit, capacitor, speed setter, etc. are pre-assembled in the controller. Be sure to note that in case of purchasing controller unit only for repair purpose, etc., capacitor will not be included. Although 600mm lead wire with connector is included in the controller, when you need to use the controller with longer distance from the speed control gearmotor, use the separate extension code with connector. The extension code can be used at 5m distance maximum. The extension code is available in 1m, 2m, 3m and 4m. (Refer to the "Optional Parts" in P. E111.)
SCU-200

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

SCU-100

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Methods for Connection


1 Couple both connectors of motor and controller, and plug in the AC plug with code (lead wire in case of 200V) to the power source. 2 Be sure that the operation switch should be "off" when connecting to the power source. 3 To change the rotation direction, switch the orange color lead wire in the capacitor to the free terminal. (Be sure that the power switch should be "off" when doing this.)
Lead wire (300mm) with connector CW Lead wire(0.5m) in 200V use

Dimension Diagram
24.3

21.5
Capacitor Blue

CW orange color Black

72 28

85
CCW

Standard Motors

Lead wire (600mm) with connector 55 On/Off Switch

Cautions for Safety

Option

AC Plug with code(2m) in 100V use

(GTR Mini-Series)

Diagram for Panel Manufacturing

12 3

720.3 64 Max41 22 2 4.5

631.0 0

511.0 0

Panel manufacturing diagram in case of assembling by making rectangle holes.

E61

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Speed Control Gearmotor Controller


P-Type
SCP-101LSCP-201L
Dimension Diagram

17.45

70

62

16

50 64

8.5 11.5

The photo indicates SCP-101L.

Functions
1 Variable speed + Instant stopping function 2 Totally separated type 3 Built-in speed setter/ Motor rotation speed can be adjusted by
the speed setter in the controller front face. 4 Plug-in type 8-pins 5 For 1-phase 100V, 200V 100V only in 6W
84

6 Motor Capacity: GTR Mini-Sereis 15W90W


GTR-L-Series 6W40W

7 Instant stopping by electric brake is available. OP-RV24B20K included. is 8 External speed-setting equipment

SCP-102LSCP-202L

Dimension Diagram

Slow start

17.45

70

62

Slowdown

16

50 8.5 11.5 64

The photo indicates SCP-102L

Functions
1 Variable speedInstant stopping 2 3 4 5
Slow start/slowdown function Totally separated type Built-in speed setter/ Motor rotation speed can be adjusted by the speed setter in the controller front face. Plug-in type 8-pins For 1-phase 100V, 200V 100V only in 6W

84

6 Motor Capacity: GTR Mini-Sereis 15W90W


GTR-L-Series 6W40W

7 Instant stopping by electric brake is available. 8 External speed-setting equipment OP-RV24B20K included. is 9 Slow start/slowdown is possible. (The speed varies linearly with
the time. It varies in the range of 0.5 Second 10 Second/1000rpm.)

E62

Technical Information

SCP-103LSCP-203L

Dimension Diagram Figure-30

Slow start

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension

17.45

70

62

Slowdown

16 8.5 11.5 64

50

The photo indicates SCP-103L.


84

Functions
1 Variable speed + Instant stoppingSlow start/slowdown 2 3 4 5
Parallel run function Totally separated type Built-in speed setter/ Motor rotation speed can be adjusted by the speed setter in the controller front face. Plug-in type 8-pins For 1-phase 100V, 200V 100V only in 6W

Gearmotor with Brake

6 Motor Capacity: GTR Mini-Sereis 15W90W 7 8 9


GTR-L-Series 6W40W Instant stopping by electric brake is available. External speed-setting equipment OP-RV24B20K included. is Slow start/slowdown is possible. (The speed varies linearly with the time. It varies in the range of 0.5 Second 10 Second/1000rpm.) Parallel run is feasible.

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

10

P-Type Standard Accessories


External Speed Setter Figure-31
13 0.2 0.4 M30.5
40 50 30 60 70 80 90 0 100

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

12 2.80.2 3.2 9.5

Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

24 40

15.9

20 10

Dial Board MIN35 Insulator Film Switch 40

10

Adjustable Resistor B20K 100.5 Manufacturing Diagram for Mounting Hole

Standard Motors

Cautions for Safety

Connecting socket in the reverse side


48.4 390.1 R5 3.2 25 17.5 29 33

Figure-32

Option

6 45 4 0.8 2 8 20.8 16 8 29

E63

Speed Control With Motor Gearmotor Wiring Diagram


Wiring Diagram With Motor
Wiring Diagram With Motor
1 One Way Operation Shift Transmission Slow Start Slowdown
1

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

external speed setter 20k 1/4W attachment

One Way OperationShift Transmission Function Slow Start Slowdown 1590W 640W SCP-101L SCP-201L Power SW1 SW2 AC125V Over 5A AC250V Over 5A DC20V 10mA 1590W 640W SCP-102L SCP-202L Remarks Power Source Switch On Off

6 7

run SW2 stop

Motor GTR Mini Capacity GTR-L Applicable Models

Note 1Note 1 Brown black black white white grey blue black

cooling fan motor

capacitor
gearmotor

Note 1 Lead wire for motor fan will be attached only in 60W 90W. 2 "Brown" indicates 200V. 3 When SW2 is "on", slow start/slowdown at "off" shift become effective.

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

In case of changing shift by controller without using


The shape of gearmotor is that for GTR Mini-Series.

the external speed setter, take off the external speed setter on the circuit and operate with SW2.

2 Forward/Reverse Operation Shift Transmission Slow Start Slowdown


1 2
external speed setter 20k 1/4W attachment

Forward/Reverse Operation Shift Transmission

Function Motor GTR Mini Capacity GTR-L Applicable Models 1590W 640W SCP-101L SCP-201L Power SW1 SW2 AC125V Over 5A AC250V Over 5A DC20V 10mA AC125V Over 5A AC250V Over 5A

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

Slow Start Slowdown 1590W 640W SCP-102L SCP-202L Remarks Power Source Switch On Off Forward/Reverse Operation

6 7

run

SW2 stop

SW-3

forward reverse

Note 1Note 1 Brown black black white white grey blue black

SW3

cooling fan motor

capacitor
gearmotor

Note 1 Lead wire for motor fan will be attached only in 60W 90W. 2 "Brown" indicates 200V. 3 When SW2 is "on", slow start/slowdown at "off" shift become effective.

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped. The shape of gearmotor is that for GTR Mini-Series.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

E64

Technical Information

3 One Way Operation Shift Transmission Instant Stopping Slow Start Slowdown(6W25W)
Function
1 2
external speed setter 20k 1/4W attachment

One Way OperationShift Transmission Instant Stopping Slow Start Slowdown Motor GTR Mini Capacity GTR-L Applicable Models 1525W 625W SCP-101L SCP-201L Power 1525W 625 W SCP-102L SCP-202L Remarks Power Source Switch On Off
Operate with instant stop
Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

run

6 7

SW2 stop SW4-1

OFF

ON instant stopping

SW4-2 R2

SW1 SW2 SW4-1 SW4-2

AC125V Over 5A AC250V Over 5A DC20V 10mA DC20V 10mA AC125V Over 5A AC250V Over 5A 10 10W

Brown white white grey blue black

R2
capacitor

Option OP-RWH10

gearmotor

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

Note 1 "Brown" indicates 200V. 2 When SW2 is "on", slow start/slowdown at "off" shift become effective. 3 case of doing current protection on In the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1F500V).

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

The shape of gearmotor is that for GTR Mini-Series.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

4 One Way Operation Shift Transmission Instant Stopping Slow Start Slowdown(40W90W)
One Way OperationShift Transmission
1 2
external speed setter 20k 1/4W attachment

Function

Instant Stopping Slow Start Slowdown

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

run

6 7

SW2 stop

OFF

SW4-1 ON instant stopping

Motor GTR Mini Capacity GTR-L Applicable Models

4090W 40W SCP-101L SCP-201L Power

4 090 W 40 W SCP-102L SCP-202L Remarks Power Source Switch On Off

SW4-2 R2

Standard Motors

SW1
Brown
Note 1Note 1

AC125V Over 5A AC250V Over 5A DC20V 10mA DC20V 10mA AC125V Over 5A AC250V Over 5A 10 10W

Cautions for Safety

SW2 SW4-1 SW4-2


capacitor

Option

black black white white grey blue black

Operate with instant stop

cooling fan motor

R2

gearmotor

Option OP-RWH10

The shape of gearmotor is that for GTR Mini-Series.

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Lead wire for motor fan will be Note 1 attached only in 60W 90W. "Brown" indicates 200V. 2 When SW2 is "on", slow 3 start/slowdown at "off" shift become effective. In 4 case of doing current protection on the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1F500V).

E65

Speed Control With Motor Gearmotor Wiring Diagram


5 Forward/Reverse Operation Shift Transmission Instant Stopping Slow Start Slowdown 6W25W
1 2
external speed setter 20k 1/4W attachment

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Forward/Reverse Operation Shift Transmission

Function

Instant Stopping Slow Start Slowdown

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

run

6 7

SW2 stop SW4-1

OFF

ON instant stopping

Motor GTR Mini Capacity GTR-L Applicable Models

1525W 625W SCP-101L SCP-201L Power

1525W 625W SCP-102L SCP-202L Remarks


Power Source Switch

SW3
forward reverse

SW4-2 R2

SW1 SW2 SW3


Brown white white grey blue black

AC125V Over 5A AC250V Over 5A

DC20V 10mA
AC125V Over 5A AC250V Over 5A

On Off
Forward/Reverse Operation

SW4-1 SW4-2
capacitor

DC20V 10mA
AC125V Over 5A AC250V Over 5A

Operate with instant stop


Option OP-RWH10

R2

10 10W

gearmotor

The shape of gearmotor is that for GTR Mini-Series.

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Note 1 "Brown" indicates 200V. 2 When SW2 is "on", slow start/slowdown at "off" shift become effective. 3 case of doing current protection on In the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1 F500V).

6 Forward/Reverse Operation Shift Transmission Instant Stopping Slow Start Slowdown 40W90W
1 2
external speed setter 20k 1/4W attachment

Forward/Reverse Operation Shift Transmission

Function

Instant Stopping Slow Start Slowdown 4090W 40W SCP-101L SCP-201L Power 4090W 40W SCP-102L SCP-202L Remarks
Power Source Switch

3
SW1 ON single-phase 100V ON or single phase 200V

4 5 1 8

run

6 7

SW2 stop SW4-1

OFF

Motor GTR Mini Capacity GTR-L Applicable Models

ON instant stopping

SW4-2 R2 SW3-1 SW3-2


forward reverse

SW1 SW2 SW3-1

AC125V Over 5A AC250V Over 5A

DC20V 10mA
AC125V AC250V AC125V AC250V Over Over Over Over 5A 5A 5A 5A

On Off
Operate with forward reverse Operate with instant stop
Option OP-RWH10

1 1

Brown

SW3-2 SW4-1 SW4-2


capacitor

black black white white grey blue black

DC20V 10mA
AC125V Over 5A AC250V Over 5A

cooling fan motor

gearmotor

R2

10 10W

The shape of gearmotor is that for GTR Mini-Series.

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Lead wire for motor fan will be Note 1 attached only in 60W 90W. "Brown" indicates 200V. 2 When SW2 is "on", slow 3 start/slowdown at "off" shift become effective. In 4 case of doing current protection on the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1F500V).

E66

Technical Information

7 Parallel running
1 2 3 capacitor capacitor capacitor
external speed setter 20k 1/4W attachment
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

3 2

4 5 1 8

6 7
gearmotor

3 2

4 5 1 8

6 7
gearmotor

3 2

4 5 1 8

6 7
gearmotor

Speed Control Gearmotor Gearmotor with Clutch /Brake

One Way Operation Shift Transmission

Function
cooling fan motor

Slow Start Slowdown Parallel running

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

single-phase 100V or single phase 200V

Motor GTR Mini Capacity GTR-L Applicable Models

1590 W 64 0W SCP-103L SCP-203L

Note) Short-circuit either terminal 5 or 6.

The shape of gearmotor is that for GTR Mini-Series.

Note 1 (dashed line) means 60W 90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

8 In case of changing rotation speed by

9 Wiring method for the gearmotor with

external DC voltage.

C-Type Terminal box.


Refer to the table below in combination with the wiring diagram.

Gearmotor with Brake

Table-22
04VDC Over 1mA

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Terminal Code

Wiring method Earth Connection Note)

Remark

3 2

4 5 1 8

6 7

no connect

1 2 3 FAN

Same as the blue(brown) in the wiring diagram. Same as the black in the wiring diagram. Same as the grey in the wiring diagram. Connect to the Pin No.2 of the Controller. Same as the white-white in the wiring diagram. Only in case of 60W, 900W.

Make sure to choose correct polarity of electrode for Note 1 DC power source. Connections of dotted line are to be done based on the 2 "Wiring Diagram ". However, 7 1 pin should not be connected to any object. Be 3 sure to insulate the output of DC power source from the AC input power.

TG

Note) In case of 60W 90W, connect to the green color lead wire in the back side of the terminal block.

Standard Motors

Cautions for Safety

Option

For measure for noise capacitor, refer to < P.E72 >. As for the optional parts for Speed Control Gearmotor, refer to < P. E111E112 >.

E67

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Speed Control Gearmotor


Wiring Diagram With BrakeGTR-L only
Wiring Diagram With Brake
Wiring Diagram With Brake
1 One Way Operation Shift Transmission Slow Start Slowdown
1 2
external speed setter 20k 1/4W attachment

Note The control system of the brake part is independent from the controller. Therefore, "On and Off" control of the brake is to be done by customer.

One Way OperationShift Transmission Function


Motor Capacity

3
SW1 ON single-phase 100V or single phase 200V ON

4 5 1 8

6 7

run

Slow Start Slowdown 640W SCP-101L SCP-201L Power SCP-102L SCP-202L Remarks Power Source Switch On Off
Conjuction with magnet brake
Option OP-ENC471D-10A

SW2 stop

Applicable Models
N run SW4 stop magnet brake

Yellow

blue blue black blue blue Brown red red white white grey blue black red

SW1 SW2

AC125V Over 5A AC250V Over 5A DC20V 10mA AC125V Over 5A AC250V Over 5A 470V 1mA

A100-D45 white

A200-D90

SW4 Z

capacitor
gearmotor

Note 1 "Brown" "Blue" indicates 200V. When SW2 is "on", slow 2 start/slowdown at "off" shift become effective.

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

2 Forward/Reverse Run Shift Transmission Slow Start Slowdawn


1
external speed setter 20k 1/4W attachment

Forward/Reverse Operation Shift Transmission

Function
Motor Capacity

Slow Start Slowdown 640W SCP-101L SCP-201L Power SCP-102L SCP-202L Remarks Power Source Switch On Off Forward/Reverse Operation
Conjuction with magnet brake
Option OP-ENC471D-10A

3
SW1 ON single-phase 100V or single phase 200V ON

4 5 1 8

6 7

run SW2 stop

Applicable Models

SW3 forward reverse

N run SW4 stop magnet brake

SW1 SW2 SW3

AC125V Over 5A AC250V Over 5A DC20V 10mA AC125V Over 5A AC250V Over 5A AC125V Over 5A AC250V Over 5A 470V 1mA

Yellow

blue blue

whiteA100-D45 black blue blue Brown red red white white grey blue black

A200-D90

red

SW4 Z

capacitor
gearmotor

Note 1 "Brown" "Blue" indicates 200V. When SW2 is "on", slow 2 start/slowdown at "off" shift become effective.

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

E68

Technical Information

3 One Way Operation Shift Transmission Instant Stopping Slow Start Slowdown(6W25W)
1 2
external speed setter 20k 1/4W attachment

One Way OperationShift Transmission Instant Stopping Function Slow Start Slowdown 625W SCP-101L SCP-201L Power
R2
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3
SW1 ON single-phase 100V or single phase 200V ON

4 5 1 8

run

6 7

SW2 stop SW4-1 SW4-3 SW4-2

OFF

3 ON instant stopping N

Motor Capacity

Applicable Models

SCP-102L SCP-202L Remarks Power Source Switch On Off

SW1 SW2

AC125V 5A AC250V 5A DC20V 10mA DC20V 10mA AC125V 5A AC250V 5A AC125V 5A AC250V 5A 470V 1mA 10 10W

Yellow

blue

blue red

whiteA100-D45 black blue blue Brown red red white white grey blue black

A200-D90

SW4-1 SW4-2 SW4-3


capacitor
gearmotor

Operate with instant stop

Z R2

Option OP-ENC471D-10A Option OP-RWH10

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Note 1 "Brown" "Blue" indicates 200V. 2 When SW2 is "on", slow start/slowdown at "off" shift become effective. 3 case of doing current protection on In the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1 F500V).

With Waterresistant Brake Motor

4 One Way Operation Shift Transmission Instant Stopping Slow Start Slowdown 40W
1 2
external speed setter 20k 1/4W attachment

One Way OperationShift Transmission Function Instant Stopping Slow Start Slowdown
Motor Capacity

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

3
SW1 ON single-phase 100V or single phase 200V ON

4 5 1 8

run

6 7

SW2 stop SW4-1 SW4-3 SW4-2

OFF

3 ON instant stopping N

40W SCP-101L SCP-201L Power SCP-102L SCP-202L Remarks Power Source Switch On Off

Applicable Models

R2

SW1 SW2

AC125V Over 5A AC250V Over 5A DC20V 10mA DC20V 10mA AC125V Over 5A AC250V Over 5A AC125V Over 5A AC250V Over 5A 470V 1mA 10 10W

Standard Motors

Yellow

blue

blue red

whiteA100-D45 black blue blue Brown red red white white grey blue black

A200-D90

SW4-1 SW4-2 SW4-3


capacitor
gearmotor

Cautions for Safety

Operate with instant stop

Option

Z R2

Option OP-ENC471D-10A Option OP-RWH10

Rotation Direction When changing the rotation direction, replace "blue(brown)" by "black".

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Note 1 "Brown" "Blue" indicates 200V. 2 When SW2 is "on", slow start/slowdown at "off" shift become effective. 3 case of doing current protection on In the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1 F500V).

E69

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Speed Control Gearmotor


Wiring Diagram With BrakeGTR-L only
5 Forward/Reverse Operation Shift Transmission Instant Stopping Slow Start Slowdown 6W25W
1 2
external speed setter 20k 1/4W attachment

Forward/Reverse Operation Shift Transmission

Function

Instant Stopping Slow Start Slowdown

3
SW1 ON single-phase 100V or single phase 200V ON
SW3

4 5 1 8

6 7

SW2 stop SW4-1 SW4-3

OFF

3 ON instant stopping N

Motor Capacity

625W SCP-101L SCP-201L Power SCP-102L SCP-202L Remarks


Power Source Switch

Applicable Models

SW4-2 R2

forward reverse

SW1 SW2

AC125V Over 5A AC250V Over 5A DC20V 10mA AC125V Over 5A AC250V Over 5A DC20V 10mA AC125V Over 5A AC250V Over 5A AC125V Over 5A AC250V Over 5A 470V 1mA 10 10W

Yellow whiteA100-D45 black

blue blue

On Off
Forward/Reverse Operation

A200-D90

red

SW3 SW4-1

blue blue Brown red red white white grey blue black

SW4-2
capacitor

Operate with instant stop

SW4-3 Z R2

gearmotor

Option OP-ENC471D-10A Option OP-RWH10

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

"Brown" "Blue" indicates 200V. Note 1 When SW2 is "on", slow start/slowdown at 2 "off" shift become effective. In 3 case of doing current protection on the contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1F500V).

6 Forward/Reverse Operation Shift Transmission Instant Stopping Slow Start Slowdown 40W
1 2
external speed setter 20k 1/4W attachment

Forward/Reverse Operation Shift Transmission

Instant Stopping Function Slow Start Slowdown 40W SCP-101L SCP-201L Power
SW4-2 R2

3
SW1 ON ON

4 5 1 8

run

Motor Capacity

6 7

SW2 stop SW4-1 SW4-3

OFF

3 ON instant stopping N

Applicable Models

SCP-102L SCP-202L Remarks


Power Source Switch

single-phase 100V or single phase 200V

SW1 SW2 SW3-1 SW3-2

AC125V 5A AC250V 5A DC20V 10mA AC125V 5A AC250V 5A AC125V 5A AC250V 5A DC20V 10mA AC125V 5A AC250V 5A AC125V 5A AC250V 5A 470V 1mA 10 10W

SW3-1 Yellow blue blue red

SW3-2 forward reverse

On Off

A200-D90 A100-D45 white


black

Forward/Reverse Operation

blue blue Brown red red white white grey blue black

SW4-1
capacitor

SW4-2 SW4-3 Z R2

gearmotor

Operate with instant stop

Option OP-ENC471D-10A Option OP-RWH10

Rotation Direction
Please don't switch rotation direction SW3before the motor have stopped.

In case of changing shift by controller without using the external speed setter, take off the external speed setter on the circuit and operate with SW2.

Note 1 "Brown" indicates 200V. 2 When SW2 is "on", slow start/slowdown at "off" shift become effective. 3 case of doing current protection on the In contact point SW4-2, apply the CR method (resistance: 120 capacitor: 0.1F500V).

E70

Technical Information

7 In case of changing rotation speed by

8 Wiring method for the gearmotor with

external DC voltage.

C-Type Terminal box.


Refer to the table below in combination with the wiring diagram. Rectifier A200-D90 A100-D45is built-in terminal box.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

04VDC Over 1mA

Table-23 3 2 4 5 1 8 6 7
1 2 3 Make sure to choose correct polarity of electrode for Note 1 DC power source. Connections of dotted line are to be done based on the 2 "Wiring Diagram ". However, 5 1 pin should not be connected to any object. Be 3 sure to insulate the output of DC power source from the AC input power. B SWITCH
no connect

Terminal Code

Wiring method Earth ConnectionNote 1 Same as the blue(brown) in the wiring diagram. Same as the black in the wiring diagram. Same as the grey in the wiring diagram. Connect to the Pin No.2 of the Controller. Connect to both terminal post of SW4-3.

Note 1) Connect to the green color lead wire in the back side of the terminal block.

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E71

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Caution for wiring


Measures against noise
1 Measure against foreign noise
In the normal using condition, there is no malfunction caused by foreign noise. However, in the location near high voltage equipment or high frequency "on and off" operations of massive electricity, it may possible that the control of motor become unstable. For the counter-measure against foreign noise, connecting noise filter will be very effective. <Refer to Optional Parts P. E112.>

In case of blocking the entering noise In case of keeping the noise not to go out

Controller power source terminal

2 Measure against the noise arisen from controller


Since the phase control is done by triac, radio noise interference may be happened. In this case, connect the noise filter as shown in the diagram on the right. <Refer to Optional Parts P. E112.>

Capacitor
For operations of Speed Control Gearmotor, capacitor is needed. Utilize the capacitor attached with products with proper wiring. Since reversible wiring (3 lead wires) is applied in the 1-phase motor, forward and reverse rotations are easily changed like a 3-phase motor. For powers of capacitor, refer to the Performance Table. Also, for shapes and dimensions, refer to < P. E30 >.

As for the optional parts for the speed control gearmotor, refer to < P. E111112 >.

E72

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E73

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Gearmotor with Specifications/Structure/ Wiring/Rectifier Clutch and Brake


Features
1 Auto Gap System

Since our exclusive "Auto Gap System" is installed in the clutch and brake, stable start/stop functions can be obtained. Furthermore, no need to have any bothersome gap adjustment.
2 High Accuracy/Long Life

By arranging clutch/brake in the output side, highly accurate determining and long life can be obtained.

Specifications
Frame Number Item Acting method Rated Torque Nm (kgfm) <15001800rpm> Exciting Voltage (Average) 16/16 0.18/0.18 0.010
8 1.2101.2107

Table-24
Frame 12 Frame 15 Magnet close 3.9 0.4 7.4 0.75 DC90V 18/26 0.20/0.29 0.015
8 2.2102.2107

Frame 18

14.7 1.5

Power (at 75 Clutch/Brake)W Current (at 75 Clutch/Brake) A Armature Braking Time ta s

27/37 0.30/0.41 0.020


8 4.3104.3107

Allowable Work Emax J (kgf m) Allowable Braking Frequency

60 times per minute

Note 1 The allowable braking frequency is a guideline value since it varies according to the using condition. 2 When continuous energizing to the clutch or brake is needed, consult us. 3 Use the rectifier attached for the power supply to clutch/brake. If different type of rectifier is to be used, consult us.

Structural chart

14

14

11 12 10 13 12
1 2 3 4 5

11

11

Frame Cover Gearmotor Output Shaft Input Shaft Clutch

6 7 8 9 10

Armature (for brake) Armature (for clutch) Field (for brake) Field (for clutch) Clutch rotor

11 12 13 14

Bearing Key Retaining ring Hex socket head bolt

E74

Technical Information

Structure
Rectifier A200-D90(or A100-D90) requires to operate clutch/brake. Please connect attached rectifier and protective device (ENC471D-10A) as below.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 200V
black grey White Blue short circulation Blue Brown A200-D90 Red White Black F MCa Brown Blue P.B P.B MCb MCa Blue

1-Phase 100V
blue black grey

Waterresistant Gearmotor with Brake

AC

AC

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Yellow

Yellow

CL BR
P.B P.B

blue short circulation blue Brown A100-D90 red White MCa blackF Brown blue MCb blue

CL BR

MC

MCa

MC

With Waterresistant Brake Motor

M MotorCL ClutchBR BrakeMC Relay CoilC CapacitorMCa Magnetic Contact POC a MCb Magnetic Contact POC bZ Surge Suppressorattached ENC471D-10A PB Push Button SwitchF Fuse Note 1For protecting the rectifier, put a fuse (capacity 1A) in the input or output side. 2As the rectifier contains diodes, improper wiring may cause fatal short-circuiting. So special care should be given to the wiring. 3For the relay capacity for the clutch/brake circuit, DC110V, DC13 class is recommended for it's ability of cutting off the inductive load (DC coil). DC13 class for auxiliary contact is the same classification as JIS C8201-5-1 which is applied to coil load.

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Rectifier
The supplied rectifier A200-D90 (A100-D45) or A100-D90 is required for the brake operation of the Gearmotor with Clutch and Brake. The rectifier basically contains a surge absorber. However, if a risk is foreseen, add another surge absorber or noise filter for safety sake. Please refer to P.E38 for figure and dimension of rectifier.

Capacitor
For operations of 1-phase motor, capacitor is needed. Utilize the capacitor attached with products with proper wiring. Since reversible wiring (3 lead wires) is applied in the 1-phase motor, forward and reverse rotations are easily changed like a 3-phase motor. For the volume of capacitor, refer to the performance table. For shape and dimension, refer to P. E30.

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E75

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

On Combination of Gearmotor and Inverter


1. Range of Frequency to be Effective In general, frequency of 5120Hz is recommended. For gearmotors with clutch/brake, frequency of 560Hz is recommended. (1) Cautions for high speed operations of more than 60Hz.: In the high speed operations of more than 60Hz, vibration and noise will increase. Also, circumferential velocity increased, which may result in shortening of oil seal life. (2) Cautions for low speed operations: In the low speed operation, the cooling effect may decrease, which may result in abnormal temperature rise in motor. Therefore, care should be given to the low speed operations. ( Be sure to maintain the temperature of the motor surface below 90.) 2. Torque Characteristics of the motor (Operation Limit) The torque characteristics of the motor (operation limit) differ according to the inverter to be combined with and/or to the controlling method. 3. In case of gearmotors with brake: For wiring the brake, be sure to bypass the inverter. (Power supply should be from the primary side of the inverter) Fluctuations of the voltage may result in braking failure. Refer to the wiring diagram below: C-Type Terminal Box (Rectifier built-in) AC Switching (A) (Special Order)
Black Glay White

DC Switching
Power R source S T
White Yellow Black Glay White

AC Switching (A)
R Power source S T

Inverter A200-D90

Motor

Inverter MS
White Yellow

Motor

MS

A100-D45
Blue Blue Red Black Blue Blue

Brake

A100-D45
Blue Blue Red Black Blue Blue

A200-D90

R Power source S T

Inverter

Brake

MS

U V W AC AC

U V W AC AC

4. On protection of motor In small type gearmotors, since the rated current value is small, it may possible that in some inverter, motor cannot be protected by the built-in thermal protector. In such case, install protective function separately. 5. In case of driving 400V class motor with inverter Surge voltage may arise between the terminals of the motor, which may weaken the insulation effect of the motor. In general, there are two ways to suppress the surge voltage, namely, one for suppressing the voltage at the initial stage(output reactor) and the other for suppressing the crest value (output filter). (1) Output Reactor If the wiring length is relatively short, install the AC reactor in the inverter output side and suppress the crest value. This enables the surge voltage reduced. Suppression of the crest value of the surge voltage may be difficult if the wiring is long. (2) Output filter Install the filter in the inverter output side and suppress the crest value of the terminal voltage of the motor. Since the explanations stated above are the general handling methods, we recommend you to consult with the inverter manufacturer for more details.

E76

Technical Information

Specification of Motor Lead Wire


Corresponding Motor 3-Phase Standard Voltage 1-Phase Standard Voltage 1 Phase Double Voltage 200V Terminal Signal Thermal 3-Phase Double Voltage UL3271 AWG24 UL3266 AWG20 Lead Wire Specification

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Note "200V Terminal" means the power source wire for brake input at 3-phase double voltage. "Signal Thermal" is the specification when signal thermal is specially ordered.

Others The specification of brake wire and clutch/brake wire is UL3266 AWG20.

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E77

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Detailed Dimension Diagram of out put shaft for common


GTR Mini Series

G-Type H-Type F2-Type F2F


K M T

P Q

Dimension

K
Frame Number

M 20 24 27 35 40 50 60

N 18 21.5 24 32 36 45 54 12 15 18

S 6 h 4 0 0.011 5

Key P 9 h 4 0 0.030 5 0 0.030 T

Q 2.5 3

12 15 18 22 28 32 40

22 27 30 40 45 55 65

6 22 28 32 40 0 0.013

3.5

8 10 12

0 0.036 0 0.043

7 0 0.090

0 0.016

Dimension "N" is the key-length of water-resistant type. For that for GT-Type, ask us if required.

GTR-L Series

K M T

P Q

Dimension

K
Frame Number

M 18 20 22 10 12 15

S 7 h 0 0.015 0 0.018

Key P 9 h T

10 12 15

20 22 25

0 0.030

0 0.030

2.5

E78

Technical Information

Detailed Dimension of Hollow Shaft


GTR Mini Series

F2-Type F2S
C L1 P

C L1 P W

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

D3 D D1 D2 T

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Chase for retaining ring

30

detail for inside of circle

Frame Number 12 15

D H8 12 15

D1 20 24

D2 H8 39 39

D3 13 16

W 4 5

T 13.8 17.3

L 81 96

L1 20 21

P 8 9

C 5.5 4

F 2 2

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note The C-Type Snap Ring conforms to JIS-B2804-1978 The C-Type Snap Ring is not attached to the product.

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E79

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor

Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

F2S Type Attachment and Detachment of Hollow Shaft


Attachment of Hollow Shaft and Driven Shaft of Reducer
1 Apply anti-seizing agent proper for the using circumstance such as molybdenum disulfide, on the surface of the driven shaft and the bore of the hollow shaft, and then insert the reducer in the driven shaft. 2 In case impact does not affect in the uniform load, "h7" tolerance is recommended for the driven shaft. In case shock load is imposed or great radial load is observed, tighten the fittings. "H2" tolerance is recommended for the bore of the hollow shaft. 3 If the fitting is too tight, tap the edge of the hollow drive shaft with the plastic hummer and fit together. In this case, never hit the casing. Smoother insert can be obtained if you prepare jigs shown in the figure below:

Key material Driven shaft

Tolerance of the bore Range of H8 Hollow shaft

Tolerance of the fixed side bore, range of H8 Spacer Nut (Input shaft can be inserted by tightening the nut.)

Bolt Bearing Oil seal

Figure-1 Spacer, nuts, bolts, key materials and bearing parts should be prepared by customer.
4 The length of the driven shaft and the fixing key are recommended to be within the tolerance of H8 range of the fixed side bore.(The dimension of the bore H8 tolerance part can be seen as L1 in the "Detailed figure of the Hollow Shaft" on page E53.) 5 It is recommended to supress the fluctuation at the edge of the driven shaft below 0.05. The greater fluctuation at operation may give harmful effect to the reducer.

Connecting Reducer with Driven Shaft


1 Driven shaft with shoulder
Fixing the driven shaft between the pillows Spacer Bolt

Stopper ring

Connecting machine

Figure-2 Fixing by spacer and stopper ring (The spacer, bolt and retaining ring parts should be prepared by customer.)
Note Excessive tightening of the bolt may cause deformation of the retaining ring, which carefully note.

E80

Technical Information

Fixing the driven shaft between the pillows End plate Bolt Connecting machine

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Figure-3 Fixing by End plate (End plate, bolt parts should be prepared by customer.)

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

2 Driven shaft without shoulder

With Waterresistant Brake Motor

Fixing the driven shaft between the pillows positioning spacer

Stopper ring Spacer Bolt

Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Connecting machine

Standard Motors

Cautions for Safety

Figure-4 Fixing by spacer and stopper ring (Spacer, positioning spacer, bolt and stopper ring parts should be prepared by customer.)
Note sure to have space between the outer diameter of the spacer and the inner diameter of the hollow shaft. Be Excessive tightness of the fitting or inaccuracy of the spacer's diameter may cause greater fluctuation on the driven and hollow shafts. Positioning spacer is used when deciding the position of the reducer. In case the length of the driven shaft is clarified preliminarily, positioning spacer is not necessary. By having positioning spacer, smooth detachment from the hollow shaft can be obtained. (For the details of detachment from the hollow shaft, refer to Figure-5 on page E82.)

Option

E81

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

F2S Type Attachment and Detachment of Hollow Shaft


Recommended size for the driven shaft fixing part
For the attachment of the hollow shaft in general use, we recommend you to refer to the dimensions shown on the right as a guide line for the strength when designing.

Recommended sizes for the driven shaft fixing parts


Bolt size F2S-12 M5 M6 Spacer measurements Outer diameter Inner diameter 11.5 14.5 6 7 Width 3 3
Nominal designation for C-type stopper ring

12 15

Bolt

F2S-15
C-Type Snap Ring Spacer

About the length of driven shaft


The driven shaft must be reached to the both side of the L1 part. (As shown on the figure on the right) However, be sure to have allowance for the spacers dimension necessary at the "detachment from the hollow shaft" stated below.
L1 P

L L1 P

About the length of key for the driven shaft


The length of the key should be more than 1.5 times of the diameter of hollow shaft. Also, the key inserting position should be the place where more than 1/2 of the total key length can be reached to L1. (Refer to the figure on the right)

Detaching from the Hollow Shaft


Make sure to avoid excessive force between the casing and the hollow shaft. Smoother detachment can be obtained by using a jig as shown in the figure below:
(The convexity part is for the fixing point of the spacer.) Key material 2

Key material 1

Disk

Stopper ring

Cross section of the spacer Spacer (with tap) Bolt (By tightening bolt, the output shaft comes out.)

Figure-5 (Parts such as spacer, disk, bolt, stopper ring, etc. should be prepared by customer.)

E82

Technical Information

Attaching Reducer
Merits and demerits of flange mounted and torque arm mounted.
Merits Flange Mount Direct attachment to the machine is possible. Space saving Easy alignment with the connecting machine Only one fixing point is needed for fixing with other machine Demerits Alignment with the connecting machine is needed. Four(4) attaching taps are needed for connecting with other machine. Torque arm is needed. Space for attaching torque arm is needed.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Torque Arm Mount

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E83

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

F2S-TypeTorque Arm
Fixing a Reducer and a Torque Arm
1 Torque arms are subjected to rotation reaction torque, therefore, they must be strong by using materials of enough thickness and bolts to endure the shock load on starting/braking. Choosing our optional torque arms is the most appropriate solution. (Refer to page E85.) 2 When installing a reducer with a torque arm, be sure to tighten the bolt using helical spring lock washers and plain washers. For proper tightening torque, refer to the table shown on the right.

Bolt Size and Respective Tightening Torque


Bolt Size M6 M8 Tightening Torque N m kgf m 4.9 0.5 13 1.3

How to fix the Torque Arm Fixing Part


1 In case of Normal/Reverse Operation
Firmly fix the fixing part of the torque arm. Make sure that there is no radial load (suspending load) imposed between the driven shaft and the hollow shaft of the reducer, caused by poor alignment between the hole of fixing part and the connecting machine. (Refer to the Figure-6)
connecting machine helical spring lock washer nut torque arm plain washer bolt hole of the connecting machine side

hole of the torque arm side

Figure-6 Attaching the fixing part

Excess force arisen in the driven shaft and the hollow shaft may cause failure of the machine.

Bad example

Note When a backlash in the attaching part arose by normal/reverse operations or by high frequency of starting/stopping, the intense impact given to the torque arm in each starting may cause the failures such as loosening of the tightening bolt.

2 In case of One-Direction Operation If the frequent staring torque like in the normal/reverse operation, is not observed, operation with the released fixing part of torque arm is possible. However, it is necessary to fix the driven shaft and the hollow shaft. (Refer to page E80E81, Figure -2Figure-4) In this case, be sure to secure enough space both for radial direction and for thrust direction in the alignment between the connecting machine and the fixing part.
connecting machine pin with shoulder torque arm Secure space for the hole to avoid shouldering. pin with shoulder hole of the torque arm

Secure space to avoid the radial load.

Figure-7 Example of using pin with shoulder

E84

Technical Information

FS Type (Hollow Shaft) Torque Arm (Option)


I F
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

C E E D 3-H B A A G

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Model Number TAF2S-12 TAF2S-15

Frame Number 12 15

A 43 48

B 24 30

C 37.5 56.5

D 7 9

E R7 R9

F R9 R11

G 3.2 3.2

H 8.4 10.5

I 7 9

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Designing the Torque Arm


In case customer does not use our optional torque arm and use their manufactured torque arm as shown in the Figure-8, the distance between the center of the output shaft and the fixing point(r) can be calculated with the following formulas: In case of using the torque arm as shown in the Figure-9, the distance between the center of the output shaft and the fixing point(r) can be calculated with the following formulas:

With Waterresistant Brake Motor Speed Control Gearmotor

SI Unit Actual load torque 1000 N m mm r Allowable O.H.L. 9.8Mass of the reducer kg N Gravimetric Unit Actual load torque kgf m 1000 mm r Allowable O.H.L. kgf Weight of the reducerkgf Figure-8

SI Unit Actual load torque N m AM 1000 mm r Allowable O.H.L. 9.8Mass of the reducer kg N A10 Gravimetric Unit Actual load torque kgf m AM 1000 mm r Allowable O.H.L. kgf Weight of the reducer kgf A10 Figure-9

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

M
Standard Motors

Cautions for Safety

Option

r
Torque Arm Torque Arm NoteRefer to the table below for "A". Note the thickness of torque arm, For Please refer to aboveTorque Arm. (Option) Frame mm Number A 12 15 43 55

E85

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Detailed Dimension of Hollow Shaft Safety Cap

B 18

B 18 1 2

A
6.5

41

31 H

31 41

7.9

A Detailed figure of the part.


15 15

Frame Number 12 15

B 51 60

H 8.2 6.3

E86

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E87

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Overseas standard product Gearmotor


We provide gearmotors that meet the global directive, standards, institutions.
UL Standard Gearmotors
About UL Standards
UL is the abbreviation of "Underwriters Laboratories Inc.", a private testing organization which was established in 1894 by the Association of American Fire Insurance, with the aim to protect human lives and properties from fire, disasters and other accidents. This organization performs testing and certification of all kinds of products, parts and materials. This is the safety standard employed by most of the American states.

About CSA Standards


In Canada, it is regulated by law that all products must conform to CSA Standards. UL is authorized as a certification organization for CSA Standards, therefore, when a product is certified by CSA Standards, it can also be allowed to display "cUL" mark and used in the domestic Canadian market.

Relevant Standards
Number of Phase

Relevant Standards
Number of Phase

UL Standard UL1004 (Regulations on overall structures of motors) UL2111 (Regulations on overheating protection of motors) UL1004 (Regulations on overall structures of motors)

CSA Standards C22. 2 No.100(Regulations on general matters for motors) C22. 2 No.77 (Regulations on requirements for the motors with overheating protection device) C22 2 No.100(Regulations on general matters for motors)

1-Phase

1-Phase 3-Phase

3-Phase

3-phase motors are only evaluated by structures and not evaluated by the overheating protection test.

Both Nissei's 1 and 3-phase gearmotors are certified by UL and CSA and allowed to display "UL" and "cUL" marks.

UL File No.
1-Phase No. E141674 3-Phase No. E172621

CE Marking Gearmotors
About CE Marking
All the machines exported to Europe are required to have "CE Marking". In order to comply with the "CE Marking", products must be in conformity with the EC Directive. For the verification of conformity with the EC Directive, the approval from the EN Standards is a must. Nissei declares that all the NIssei "CE Marking" products conform to the EC Directive.

"CE" Marking
Nissei affixes the "CE Marking" on the gearmotors which conform to EC Directive (Low Voltage Directive).

Relevant Directives/Standards
EC Directives EN Standards Low Voltage Directive 73/23/EEC Low Voltage Directive EN60034-1 Regulations on motors in general

China CCC Certified Gearmotor


China: About the CCC marking

In China, on the occasion of joining the WTO, the China Compulsory Certification started operation in August, 2003, unifying all the certification systems existed and obligating to affix the CCC mark to all the items distributed in the domestic China market. Relevant Nissei products to this certification are gearmotors with the capacity of less than 0.75kW with induction motor. Products certified by CCC are regarded as the CE Marking certified products. (Refer to page E70) In case exporting gearmotors as an independent unit to Mainland China, the CCC certification for the gearmotor itself is needed. However, in case of exporting gearmotor as a component of a machine, only certification of the machine is needed.

E88

Technical Information

3-phase1-phase 15W90W
G H F2 Type Gearmotor Brake Gearmotor Water-resistant Gearmotor Water-resistant Brake Gearmotor UL CE CCC
Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Note 1) Excluding the L series, GT types

UL
Phase Capacity Voltage/Frequency V Hz 200V/50Hz 200V/60Hz 220V/60Hz 208V/60Hz 230V/60Hz 380V/50Hz 400V/50Hz 400V/60Hz 440V/60Hz 460V/60Hz 480V/60Hz 100V/50Hz 100V/60Hz 115V/60Hz 120V/60Hz 200V/50Hz 200V/60Hz 220V/60Hz 230V/60Hz

CE
Phase Capacity Voltage/Frequency V Hz 200V/50Hz 200V/60Hz 220V/60Hz 220V/50Hz 230V/50Hz 380V/50Hz 400V/50Hz 400V/60Hz 440V/60Hz 415V/50Hz 420V/50Hz 440V/50Hz 100V/50Hz 100V/60Hz 200V/50Hz 200V/60Hz 220V/50Hz 230V/50Hz

3-phase

15W 90W

3-phase

15W 90W

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1-phase

15W 90W

1-phase

15W 90W

For marked voltage, some of 15W and 25W is not available. Please contact us for further information. Blue ink voltage/freauency indicates " X " on the tail. Please contact us about the other voltage.

For marked voltage, some of 15W and 25W is not available. Please contact us for further information. Blue ink voltage/freauency indicates " X " on the tail. Please contact us about the other voltage.

With Waterresistant Brake Motor Speed Control Gearmotor

CCC
Phase Capacity Voltage/Frequency V Hz

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

3-phase

15W 90W

200V/50Hz 200V/60Hz 220V/60Hz 220V/50Hz 230V/50Hz 380V/50Hz 400V/50Hz 400V/60Hz 440V/60Hz

Standard Motors

1-phase

15W 90W

100V/50Hz 100V/60Hz 200V/50Hz 200V/60Hz 200V/50Hz 230V/50Hz

Cautions for Safety

Option

Blue ink voltage/freauency indicates " X " on the tail. Please contact us about the other voltage. 220V/50Hz or 380V/50Hz is usually standard voltage in China.

E89

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Overseas standard product Gearmotor


GTR MINI SERIES Overseas standard product gearmotor15W90Ware classified by codes as shown below. Specify these codes in your induiry and order.
Type
Frame Shaft Reduction Number Arrangenent Ratio Stardards Phase ClassificationAby ClassificationBby Motor Type Motor Type Motor Capacity Voltage Frequency Terminal Box Auxiliary Mark Specification Code

GL HL F2S F2F

12 40 15 18

N L N T

015 12X 120 240

U Y C C

T S T S

M B WB M

L Y R R

15 90 40 60

N W N W

C C N T

HZ

Type

Frame NO, and Diameter of Output Shaft Shaft Arrangement


HL,HF,F2F only, other than thoseabove type is "N"

Parallel Shaft Foot Mount GL : G Type Parallel Shaft Flange Mount GF : G Type Parallel Shaft Small Flange Mount GK : G Type Right Angle Shaft Foot Mount HL : H Type Right Angle Shaft Flange Mount Frame No.22 only HF : H Type Concentric Hollow Shaft F2S : MINI F2 Type Concentric Solid Shaft F2F : MINI F2 Type Output Shaft DiameterHollow Shaft type is the bore and other type is the outside diameter
L: Output shaft on the left viewing from lnput shaft side.
Gearhead

Motor

R: Output shaft on the right viewing from lnput shaft side.

T: Output shaft on both side

Reduction Ratio
Reduction Ratio is all triple digits dicplay.

005 : 15 15X : 11800 10010 120012X


U Y C T S M B WM WB L15 L25 R25 R40 Y40 R60 Y60 R90 Y90 N : UL Standards UL cUL : CE Marking Products : Praducts Certified by CCC : 3-phase : 1-phase : With Motor : With Brake Motor : With Water-resistant MotorIP65 Note 1 Note 1 : With Water-resistant Brake MotorIP65 : 15W G-12, G-22, H-15, H-22, F2S-12, F2F-15 : 25W G-12, G-22, H-15, H-22, F2S-12, F2F-15 H-28 : 25W G-15, G-28 : 40W G-15, G-28, G-32, H-18, H-28, H-32, F2S-15, F2F-18 : 40W G-18 : 60W G-15, G-28, G-32, H-18, H-28, H-32, F2S-15, F2F-18 : 60W G-18 : 90W G-15, G-28, G-32, H-18, H-28, H-32, F2S-15, F2F-18 : 90W G-18, G-40, H-40 : Standard Voltage 3-phase 200V50Hz, 200V60Hz, 220V60Hz 1-phase 100V50Hz, 100V60Hz : High Voltage 3-phase 380V50Hz, 400V50Hz, 400V60Hz, 440V60Hz 1-phase 200V50Hz, 200V60Hz

Standards Phase Classification by Motor Type


A

Note: No water-resistant type of CCC certifcation

Classification by Motor Type B and Capacity


This is classitted according to type and frame number.

Voltage/Frequency

Terminal Box
Note2: The spec is different each standards, Pleace make sure to read "The spec of overseas standard product" and confirm.

Auxiliary Code Specification Code


Note3: Spec Code does not appear on the product type designation in the nameplate. It is indicated on the additional number column in the nameplate.

C : C type Terminal Box No terminal block manufactured by resin. A : A type Terminal Box No terminal block manufactured by aluminum. Iead wire disassemble water-resistant cab tire cable N : No Terminal Box T : T type Terminal Box K : K type Terminal Box CE CCC C : C type Terminal Box, Rectifier built in Terminal Box Iead wire disascemble water-resistant cab tire cable N : No Terminal Box Blank : Standard Specs : Mark for Additional Specs X UL Instruction for terminal box lead wire position. Refer to the specification code list on P.E54.

E90

Some have different frame numbers than domestic standard products. Refer to the standard motor type composition table on page E98 to page E101 for details. Accreditation for the various safety standards is received for the motor models. [E.g.] GL12N015-UTML15NC Registered model UTML15NC For adapting from domestic models refer to the transformation table on page E91.

Technical Information

Domestic model and Overseas standard product model.


Format of international standard supporting products
International standard supporting product formats are different than domestic standard specifications so when ordering it is necessary to indicate the international standard supporting product format. First select the domestic specification product from this catalog with equivalent specifications (volume, reduction ratio, motor category, etc.) and change the format to an international standard supporting product format using the diagram below as a reference. Dimensions, properties and so on are the same as domestic specification products but some models have different frame numbers (output axle diameter) and do not match the dimensions of domestic specification products. See page E93 for applicable models.

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

Main precautions regarding format changes


The reducer and motor are expressed with different formats. The reduction ratio is expressed differently, all expressions using three digits. [Examples] 5 005, 1200 12x Example of model translation
Domestic model
Type
Classification by motor type Frame Number Shaft Anangement Reduction Ratio

Phase

Motor Capacity

Option

Auxiliary Specification Mark Code

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

GL HL F2S F2F

M MN B M

12 40 15 18 T L

015 1200 120 240

T S T S

15 90 40 60 W W

T C C T X X HZ T6

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Standard model
Type
Frame Number Shaft Reduction Anangement Ratio

Standard

Phase

Classification by Classification by motor type A motor type B

Voltage Motor Terminal Capacity Frequency Box

Auxiliary Specification Code Mark

Gearmotor with Brake

CCC UL CCC

GL HL F2S

12 40 15

N L

015 12X 120

C U C

T S T

M B B

L Y R

15 90 40

N W

T C C X X HZ T6
With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension

N T

N W

CE

F2F

18

240

60

Motor Nameplate

Reversible Gearmotor with Brake

UL

CE

CCC

The CE mark is included. Also, separate from the nameplate, the seal is attached.

Speed Control Gearmotor with Brake Technical Information

F2S15N010-UTMR-40NC
40W 4P RAT10 10:1 200V 50Hz 0.28A 1320rpm 200V 60Hz 0.26A 1540rpm 220V 60Hz 0.27A 1590rpm
IP20 Ins.A S1 CONT. DT-90 MFG NO.12345678901
made in Japan

F2S15N010-YTMR-40NT
40W 4P RAT10 10:1 200V 50Hz 0.28A 1320rpm 0.58P.F. 200V 60Hz 0.26A 1540rpm 0.68P.F. 220V 60Hz 0.27A 1590rpm 0.64P.F.
IP20 Ins.120 EN60034-1 S1 CONT. DT-90 MFG NO.12345678901
made in Japan

F2S15N010-CTMR-40NT
40W 4P RAT10 10:1 200V 50Hz 0.28A 1320rpm 0.58P.F. 200V 60Hz 0.26A 1540rpm 0.68P.F. 220V 60Hz 0.27A 1590rpm 0.64P.F.
IP20 Ins.E EN60034-1 S1 CONT. DT-90 MFG NO.12345678901 2008

Standard Motors

PH:3 INDUCTION MOTOR

PH:3 INDUCTION MOTOR CE

PH:3 INDUCTION MOTOR CE

Cautions for Safety

Option

M 2008

2008

NISSEI CORP.

NISSEI CORP.

E91

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Specifications of standard Motor


UL Terminal Box for UL standard
For indoor
Capacity 15W90W Specification without brake with brake Flying Lead Terminal Box Type C-BOX A-BOX

Note1C type terminal box is made of plastic, and A type is made of aluminium. If you need terminal box, please choose Cor A 2No terminal for C type and A type. For with brake, brake lead wires are employed inside of terminal box . red wireis taken separately. 3For more than 220V, 200V terminal 4Water-resistant type is same as domestic standard fire cable.

C type Terminal Boxplastic


3-phase/1-phase 15W90W
Earth terminal

A type Terminal Box Aluminium


3-phase/1-phase 15W90W
Earth terminal

Motor lead wires U,V,W

Brake wires only for with brake Motor lead wires U,V,W

Brake wires only for with brake

CE CCC Terminal Box for CCC standard


Capacity 15W90W Specification without brake with brake Flying Lead Terminal Box Type T-Box K-Box C-Box

Note1Flying lead and with terminal box is same as Japanese domestic standard.Please refer to MINI SERIES catalog P.E31, P.E40 P.E43 for further infomation. 2For more than 220V,200V terminal (Red wire) is taken separately. 3Water-resistant type is same as domestic standard tire cable. 4Voltage 400V class is not availabe for fiying lead.

E92

Technical Information

Mini Gearmotors : products with frame numbers (output axle diameter) that differ from domestic specifications
Be aware that small gearmotor products to which the following information applies have different frame numbers (output axle diameter and mounting dimensions) than domestic specifications.
Model Motor designation and capacity T40, T40W, S40, S40W G T60 T60W, S60W T40, T40W, S40, S40W H Ratio 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60 300, 375, 450 5, 7.5, 10, 15, 20, 25, 30 300, 375, 450 300, 375, 450 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120 300, 375, 450 10, 15, 20, 25, 30, 40, 50, 60 300, 375, 450 300, 375, 450 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120 10, 15, 20, 25, 30, 40, 50, 60 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120 10, 15, 20, 25, 30, 40, 50, 60 Japanese domestic frame size 12 22 12 22 22 15 22 15 22 22 12 12 15 15 Standard frame size 15 28 15 28 28 18 28 18 28 28 15 15 18 18

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

T60 T60W, S60W

F2S

T40, T40W, S40, S40W T60

F2F

T40, T40W, S40, S40W T60

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note 1Frame size means bore diameter of output shaft for F2S type and external diameter for the other type. 2Refer to the standard gearmotor table on pages E98 to E101. Please contact your nearest Nissei sales office or CS center if you require any clarification.

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E93

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

E94

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E95

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

E96

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E97

Technical Information

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake

Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake

GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Standard Motor Model Lineup


G-Type
Foot Mount type Flange Mount type Small Flange Mount type (Frame Number 2232)

Type

4P Motor Capacity

Frame Number

Reduction Ratio
1/5 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

12 3-Phase 15W 1-Phase 15W 22

1/40

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

12 3-Phase 25W 1-Phase 25W 15 22 28

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

Gearmotor 3-Phase 40W 1-Phase 40W Gearmotor with Brake

15 18 28 32

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/20 1/25 1/30

15 3-Phase 60W 1-Phase 60W 28 32 15 3-Phase 90W 1-Phase 90W 18 28 32 40

18

1/80

1/100 1/120

1/160 1/200 1/240 1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/5 1/40 1/7.5 1/50 1/10 1/60 1/15 1/80 1/20 1/25 1/30

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800

Note 1In G-Type, 3 different mountings are available, namely, foot mount, flange mount and small flange mount in the frame numer 2232. 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Corresponding Models for Standard Motor


UL Standard Gearmotor (GTR-U) CE Marking Gearmotor China CCC Certified Gearmotor

Type Code

As a registered product of UL Standard, the code "U" will be put at the head of type designation. Example) UGLM-15-10-T40 For CE Marking Gearmotors, there is no cord for registered product. Specify as "CE Marking Motor" in your order. For China CCC Certified Gearmotors, refer to P. E94.

E98

Technical Information

Standard Motor Model Lineup


H-Type
Foot Mount type Flange Mount type

Type

4P Motor Capacity

Frame Number

Output Shaft Arrangement

Reduction Ratio
1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 15W 1-Phase 15W

15

L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T L R T

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900 1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

22

15 3-Phase 25W 22 1-Phase 25W 28

1/100 1/120 1/160 1/200 1/240

1/300 1/375 1/450 1/600 1/750 1/900

1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

18 Gearmotor 3-Phase 40W 28 1-Phase 40W Gearmotor with Brake 32

1/100 1/120 1/160 1/200 1/240

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

1/300 1/375 1/450 1/600 1/750 1/900

1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

18 3-Phase 60W 28 1-Phase 60W 32

1/100 1/120 1/160 1/200 1/240

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

1/300 1/375 1/450 1/600 1/750 1/900

1/1200 1/1500 1/1800 1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

18

1/100 1/120 1/160 1/200 1/240

28 3-Phase 90W 1-Phase 90W 32

1/300 1/375 1/450

1/600 1/750 1/900

Standard Motors

Cautions for Safety

40

1/1200 1/1500 1/1800


Option

Note 1The models lange mount type are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) 2 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Corresponding Models for Standard Motor


Type Code

UL Standard Gearmotor (GTR-U) CE Marking Gearmotor China CCC Certified Gearmotor

As a registered product of UL Standard, the code "U" will be put at the head of type designation. Example) UHLM-18L-10-T40 For CE Marking Gearmotors, there is no cord for registered product. Specify as "CE Marking Motor" in your order. For China CCC Certified Gearmotors, refer to P. E94.

E99

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Standard Motor Model Lineup


F2 Type F2S Concentric Hollow Shaft
Type
4P Motor Capacity Frame Number

Reduction Ratio
1/10 1/80 1/15 1/100 1/20 1/120 1/25 1/160 1/30 1/200 1/40 1/240 1/50 1/60

3-Phase 15W 12 1-Phase 15W

3-Phase 25W 12 1-Phase 25W Gearmotor 3-Phase 40W 15 Gearmotor with Brake 1-Phase 40W

1/10 1/80

1/15 1/100

1/20 1/120

1/25 1/160

1/30 1/200

1/40 1/240

1/50

1/60

1/10 1/80

1/15 1/100

1/20 1/120

1/25 1/160

1/30 1/200

1/40 1/240

1/50

1/60

3-Phase 60W 15 1-Phase 60W

1/10 1/80

1/15 1/100

1/20 1/120

1/25 1/160

1/30 1/200

1/40 1/240

1/50

1/60

3-Phase 90W 15 1-Phase 90W

1/10 1/80

1/15 1/100

1/20 1/120

1/25 1/160

1/30 1/200

1/40 1/240

1/50

1/60

Note 1 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Corresponding Models for Standard Motor


UL Standard Gearmotor (GTR-U) CE Marking Gearmotor China CCC Certified Gearmotor

Type Code

As a registered product of UL Standard, the code "U" will be put at the head of type designation. Example) UF2SM-15-10-T40 For CE Marking Gearmotors, there is no cord for registered product. Specify as "CE Marking Motor" in your order. For China CCC Certified Gearmotors, refer to P. E94.

E100

Technical Information

Standard Motor Model Lineup


F2 Type F2F Concentric Solid Shaft
Type
4P Motor Capacity
Frame Number Output Shaft Arrangement

Reduction Ratio
1/10 1/80 1/15 1/20 1/25 1/30 1/40 1/50 1/60

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

3-Phase 15W 15 1-Phase 15W

L T

1/100 1/120 1/160 1/200 1/240

3-Phase 25W 15 1-Phase 25W Gearmotor 3-Phase 40W 18 Gearmotor with Brake 1-Phase 40W

L T

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

1/100 1/120 1/160 1/200 1/240

L T

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

1/100 1/120 1/160 1/200 1/240

3-Phase 60W 18 1-Phase 60W

L T

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60
With Waterresistant Brake Motor Speed Control Gearmotor

1/100 1/120 1/160 1/200 1/240

3-Phase 90W 18 1-Phase 90W

L T

1/10 1/80

1/15

1/20

1/25

1/30

1/40

1/50

1/60

1/100 1/120 1/160 1/200 1/240

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Note 1 The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

With Waterresistant Brake Motor Speed Control Gearmotor

Corresponding Models for Standard Motor


UL Standard Gearmotor (GTR-U) CE Marking Gearmotor China CCC Certified Gearmotor

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Type Code

As a registered product of UL Standard, the code "U" will be put at the head of type designation. Example) UF2FM-18L-10-T40 For CE Marking Gearmotors, there is no cord for registered product. Specify as "CE Marking Motor" in your order. For China CCC Certified Gearmotors, refer to P. E94.

Standard Motors

Shaft arrangement for F2F (solid shaft)


The L-shaft of F2F(solid shaft) is as seen in the "Fig-1". Since the F2 Type is the flange mount type of both side, the output shaft can be arranged to the right side as seen in the "Fig-2", by rotating it 180 around the motor shaft. In this case the power source inlet will be located on the underside. If you need the power source inlet to be on the upper side, modify the inlet position to the underside in advance at the stage of the "Fig-1", then rotate the shaft 180 such case, indicateT6 In when you order. Same method can be applied to the product with terminal box. For more details of modifying the power source inlet, refer to P. E54.

Figure viewed from motor-side


In case the output shaft is L-shaft type and the power source inlet locates on the upper side viewing from motor side, the output shaft will be on the left side.

Cautions for Safety

Option

Fig-1

Power source inlet Fig-2

Output shaft

Position when lotated 180 around the motor shaft

E101

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Standard Motor Specifications


G-Type 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 T15 Voltage V 200/200/220 Frame Frequency Hz Number 50/60/60 12 22 12 15 22 28 15 18 28 32 15 18 28 32 15 18 28 32 40 Rated Current A 0.13/0.13/0.13 0.13/0.13/0.13 0.18/0.18/0.19 0.17/0.17/0.17 0.18/0.18/0.19 0.17/0.17/0.17 0.28/0.26/0.27 0.20/0.21/0.21 0.28/0.26/0.27 0.28/0.26/0.27 0.36/0.35/0.36 0.30/0.32/0.31 0.36/0.35/0.36 0.36/0.35/0.36 0.49/0.50/0.50 0.44/0.46/0.44 0.49/0.50/0.50 0.49/0.50/0.50 0.44/0.46/0.44 Rated Speed rpm 1350/1550/1610 1350/1550/1610 1320/1520/1590 1310/1520/1580 1320/1520/1590 1310/1520/1580 1320/1540/1590 1370/1590/1640 1320/1540/1590 1320/1540/1590 1300/1520/1570 1370/1620/1650 1300/1520/1570 1300/1520/1570 1300/1500/1550 1360/1580/1630 1300/1500/1550 1300/1500/1550 1360/1580/1630 Striking Current A 0.30/0.29/0.27 0.30/0.29/0.27 0.44/0.42/0.46 0.42/0.40/0.42 0.44/0.42/0.46 0.42/0.40/0.42 0.64/0.61/0.75 0.68/0.64/0.71 0.64/0.61/0.75 0.64/0.61/0.75 1.04/0.97/1.07 1.10/1.03/1.14 1.04/0.97/1.07 1.04/0.97/1.07 1.25/1.33/1.38 1.59/1.50/1.66 1.25/1.33/1.38 1.25/1.33/1.38 1.59/1.50/1.66

25

T25

200/200/220

50/60/60

40

T40

200/200/220

50/60/60

60

T60

200/200/220

50/60/60

90

T90

200/200/220

50/60/60

G-Type 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 T15W Voltage V 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 12 22 12 15 22 28 15 18 28 32 15 18 28 32 15 18 28 32 40 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.13/0.14/0.13/0.14 0.10/0.10/0.10/0.10 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.16/0.16/0.16/0.16 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 Rated Speed rpm 1400/1400/1700/1700 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 Striking Current A 0.27/0.29/0.27/0.30 0.27/0.29/0.27/0.30 0.27/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.27/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.33/0.35/0.33/0.37 0.32/0.34/0.32/0.35 0.33/0.35/0.33/0.37 0.33/0.35/0.33/0.37 0.43/0.46/0.43/0.47 0.48/0.51/0.49/0.54 0.43/0.46/0.43/0.47 0.43/0.46/0.43/0.47 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81

25

T25W

380/400/400/440

50/50/60/60

40

T40W

380/400/400/440

50/50/60/60

60

T60W

380/400/400/440

50/50/60/60

90

T90W

380/400/400/440

50/50/60/60

E102

Technical Information

G-Type 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15 Voltage V 100/100 Frame Frequency Hz Number 50/60 12 22 12 15 22 28 15 18 28 32 15 18 28 32 15 18 28 32 40 Rated Current A 0.35/0.33 0.35/0.33 0.45/0.48 0.45/0.45 0.45/0.48 0.45/0.45 0.61/0.66 0.62/0.65 0.61/0.66 0.61/0.66 0.90/1.00 0.85/1.00 0.90/1.00 0.90/1.00 1.30/1.40 1.20/1.40 1.30/1.40 1.30/1.40 1.20/1.40 Rated Speed rpm 1390/1680 1390/1680 1350/1630 1370/1640 1350/1630 1370/1640 1380/1630 1440/1720 1380/1630 1380/1630 1380/1650 1430/1700 1380/1650 1380/1650 1350/1600 1400/1680 1350/1600 1350/1600 1400/1680 Striking Current A Capacitor F 0.73/0.66 0.73/0.66 0.86/0.79 1.01/0.93 0.86/0.79 1.01/0.93 1.47/1.34 2.18/2.00 1.47/1.34 1.47/1.34 2.13/1.95 2.60/2.41 2.13/1.95 2.13/1.95 2.90/2.70 3.32/3.10 2.90/2.70 2.90/2.70 3.32/3.10 5 5 7 7 7 7 10 10 10 10 15 15 15 15 20 20 20 20 20
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

25

S25

100/100

50/60

40

S40

100/100

50/60

60

S60

100/100

50/60

90

S90

100/100

50/60

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

G-Type 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15W Voltage V 200/200 Frame Frequency Hz Number 50/60 12 22 12 15 22 28 15 18 28 32 15 18 28 32 15 18 28 32 40 Rated Current A 0.18/0.17 0.18/0.17 0.24/0.23 0.23/0.23 0.24/0.23 0.23/0.23 0.29/0.34 0.31/0.34 0.29/0.34 0.29/0.34 0.42/0.47 0.42/0.48 0.42/0.47 0.42/0.47 0.62/0.67 0.62/0.69 0.62/0.67 0.62/0.67 0.62/0.69 Rated Speed rpm 1360/1620 1360/1620 1340/1600 1340/1600 1340/1600 1340/1600 1340/1610 1430/1700 1340/1610 1340/1610 1370/1640 1420/1690 1370/1640 1370/1640 1340/1600 1400/1680 1340/1600 1340/1600 1400/1680 Striking Current A 0.35/0.32 0.35/0.32 0.48/0.44 0.49/0.44 0.48/0.44 0.49/0.44 0.64/0.61 1.01/0.92 0.64/0.61 0.64/0.61 1.07/0.98 1.34/1.25 1.07/0.98 1.07/0.98 1.46/1.36 1.72/1.57 1.46/1.36 1.46/1.36 1.72/1.57 Capacitor F 1.0 1.0 1.5 1.5 1.5 1.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5 5 5 5 5

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

25

S25W

200/200

50/60

40

S40W

200/200

50/60

60

S60W

200/200

50/60

Standard Motors

90

S90W

200/200

50/60

Cautions for Safety

Option

E103

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Standard Motor Specifications


H-Type 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 T15 Voltage V 200/200/220 Frame Frequency Hz Number 50/60/60 15 22 15 22 28 18 28 32 18 28 32 18 28 32 40 Rated Current A 0.13/0.13/0.13 0.13/0.13/0.13 0.18/0.18/0.19 0.18/0.18/0.19 0.17/0.17/0.17 0.28/0.26/0.27 0.28/0.26/0.27 0.28/0.26/0.27 0.36/0.35/0.36 0.36/0.35/0.36 0.36/0.35/0.36 0.49/0.50/0.50 0.49/0.50/0.50 0.49/0.50/0.50 0.44/0.46/0.44 Rated Speed rpm 1350/1550/1610 1350/1550/1610 1320/1520/1590 1320/1520/1590 1310/1520/1580 1320/1540/1590 1320/1540/1590 1320/1540/1590 1300/1520/1570 1300/1520/1570 1300/1520/1570 1300/1500/1550 1300/1500/1550 1300/1500/1550 1360/1580/1630 Striking Current A 0.30/0.29/0.27 0.30/0.29/0.27 0.44/0.42/0.46 0.44/0.42/0.46 0.42/0.40/0.42 0.64/0.61/0.75 0.64/0.61/0.75 0.64/0.61/0.75 1.04/0.97/1.07 1.04/0.97/1.07 1.04/0.97/1.07 1.25/1.33/1.38 1.25/1.33/1.38 1.25/1.33/1.38 1.59/1.50/1.66

25

T25

200/200/220

50/60/60

40

T40

200/200/220

50/60/60

60

T60

200/200/220

50/60/60

90

T90

200/200/220

50/60/60

H-Type 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 T15W Voltage V 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 15 22 15 22 28 18 28 32 18 28 32 18 28 32 40 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.11/0.12/0.11/0.12 0.09/0.09/0.09/0.09 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.26/0.26/0.26/0.26 0.23/0.23/0.24/0.24 Rated Speed rpm 1400/1400/1700/1700 1400/1400/1700/1700 1350/1400/1600/1650 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 1350/1350/1600/1650 Striking Current A 0.27/0.29/0.27/0.30 0.27/0.29/0.27/0.30 0.27/0.28/0.26/0.29 0.27/0.28/0.26/0.29 0.20/0.21/0.20/0.22 0.33/0.35/0.33/0.37 0.33/0.35/0.33/0.37 0.33/0.35/0.33/0.37 0.43/0.46/0.43/0.47 0.43/0.46/0.43/0.47 0.43/0.46/0.43/0.47 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.70/0.74/0.69/0.77 0.73/0.78/0.74/0.81

25

T25W

380/400/400/440

50/50/60/60

40

T40W

380/400/400/440

50/50/60/60

60

T60W

380/400/400/440

50/50/60/60

90

T90W

380/400/400/440

50/50/60/60

E104

Technical Information

H-Type 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 S15 S25 Voltage V 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 15 22 15 22 28 18 28 32 18 28 32 18 28 32 40 Rated Current A 0.35/0.33 0.35/0.33 0.45/0.48 0.45/0.48 0.45/0.45 0.61/0.66 0.61/0.66 0.61/0.66 0.90/1.00 0.90/1.00 0.90/1.00 1.30/1.40 1.30/1.40 1.30/1.40 1.20/1.40 Rated Speed rpm 1390/1680 1390/1680 1350/1630 1350/1630 1370/1640 1380/1630 1380/1630 1380/1630 1380/1650 1380/1650 1380/1650 1350/1600 1350/1600 1350/1600 1400/1680 Striking Current A Capacitor F 0.73/0.66 0.73/0.66 0.86/0.79 0.86/0.79 1.01/0.93 1.47/1.34 1.47/1.34 1.47/1.34 2.13/1.95 2.13/1.95 2.13/1.95 2.90/2.70 2.90/2.70 2.90/2.70 3.32/3.10 5 5 7 7 7 10 10 10 15 15 15 20 20 20 20
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

40

S40

100/100

50/60

60

S60

100/100

50/60

90

S90

100/100

50/60

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

H-Type 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 S15W Voltage V 200/200 Frame Frequency Hz Number 50/60 15 22 15 22 28 18 28 32 18 28 32 18 28 32 40 Rated Current A 0.18/0.17 0.18/0.17 0.24/0.23 0.24/0.23 0.23/0.23 0.29/0.34 0.29/0.34 0.29/0.34 0.42/0.47 0.42/0.47 0.42/0.47 0.62/0.67 0.62/0.67 0.62/0.67 0.62/0.69 Rated Speed rpm 1360/1620 1360/1620 1340/1600 1340/1600 1340/1600 1340/1610 1340/1610 1340/1610 1370/1640 1370/1640 1370/1640 1340/1600 1340/1600 1340/1600 1400/1680 Striking Current A Capacitor F 0.35/0.32 0.35/0.32 0.48/0.44 0.48/0.44 0.49/0.44 0.64/0.61 0.64/0.61 0.64/0.61 1.07/0.98 1.07/0.98 1.07/0.98 1.46/1.36 1.46/1.36 1.46/1.36 1.72/1.57 1.0 1.0 1.5 1.5 1.5 2.5 2.5 2.5 3.5 3.5 3.5 5 5 5 5

25

S25W

200/200

50/60

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

40

S40W

200/200

50/60

60

S60W

200/200

50/60

90

S90W

200/200

50/60

Standard Motors

Cautions for Safety

Option

E105

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

GTR Mini Series

Standard Motor Specifications


F2-Type F2S Hollow Shaft 3-Phase Standard Voltage (Indoor Specifications)
Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 12 12 15 15 15 Rated Current A 0.13/0.13/0.13 0.18/0.18/0.19 0.28/0.26/0.27 0.36/0.35/0.36 0.49/0.50/0.50 Rated Speed rpm 1350/1550/1610 1320/1520/1590 1320/1540/1590 1300/1520/1570 1300/1500/1550 Striking Current A 0.30/0.29/0.27 0.44/0.42/0.46 0.64/0.61/0.75 1.04/0.97/1.07 1.25/1.33/1.38

F2-Type F2S Hollow Shaft 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15W T25W T40W T60W T90W Voltage V 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 12 12 15 15 15 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 Rated Speed rpm 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 Striking Current A 0.27/0.29/0.27/0.30 0.27/0.28/0.26/0.29 0.33/0.35/0.33/0.37 0.43/0.46/0.43/0.47 0.70/0.74/0.69/0.77

F2-Type F2S Hollow Shaft 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15 S25 S40 S60 S90 Voltage V 100/100 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 12 12 15 15 15 Rated Current A 0.35/0.33 0.45/0.48 0.61/0.66 0.90/1.00 1.30/1.40 Rated Speed rpm 1390/1680 1350/1630 1380/1630 1380/1650 1350/1600 Striking Current A 0.73/0.66 0.86/0.79 1.47/1.34 2.13/1.95 2.90/2.70 Capacitor F 5 7 10 15 20

F2-Type F2S Hollow Shaft 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15W S25W S40W S60W S90W Voltage V 200/200 200/200 200/200 200/200 200/200 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 12 12 15 15 15 Rated Current A 0.18/0.17 0.24/0.23 0.29/0.34 0.42/0.47 0.62/0.67 Rated Speed rpm 1360/1620 1340/1600 1340/1610 1370/1640 1340/1600 Striking Current A 0.35/0.32 0.48/0.44 0.64/0.61 1.07/0.98 1.46/1.36 Capacitor F 1.0 1.5 2.5 3.5 5

E106

Technical Information

F2-Type F2F Solid Shaft 3-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15 T25 T40 T60 T90 Voltage V 200/200/220 200/200/220 200/200/220 200/200/220 200/200/220 Frame Frequency Hz Number 50/60/60 50/60/60 50/60/60 50/60/60 50/60/60 15 15 18 18 18 Rated Current A 0.13/0.13/0.13 0.18/0.18/0.19 0.28/0.26/0.27 0.36/0.35/0.36 0.49/0.50/0.50 Rated Speed rpm 1350/1550/1610 1320/1520/1590 1320/1540/1590 1300/1520/1570 1300/1500/1550 Striking Current A 0.30/0.29/0.27 0.44/0.42/0.46 0.64/0.61/0.75 1.04/0.97/1.07 1.25/1.33/1.38
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake

F2-Type F2F Solid Shaft 3-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 T15W T25W T40W T60W T90W Voltage V 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 380/400/400/440 Frame Frequency Hz Number 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 50/50/60/60 15 15 18 18 18 Rated Current A 0.11/0.12/0.10/0.11 0.11/0.12/0.11/0.12 0.13/0.14/0.13/0.14 0.17/0.17/0.17/0.17 0.26/0.26/0.26/0.26 Rated Speed rpm 1400/1400/1700/1700 1350/1400/1600/1650 1300/1350/1550/1600 1300/1350/1550/1600 1300/1350/1550/1600 Striking Current A 0.27/0.29/0.27/0.30 0.27/0.28/0.26/0.29 0.33/0.35/0.33/0.37 0.43/0.46/0.43/0.47 0.70/0.74/0.69/0.77

Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

F2-Type F2F Solid Shaft 1-Phase Standard Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15 S25 S40 S60 S90 Voltage V 100/100 100/100 100/100 100/100 100/100 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 15 15 18 18 18 Rated Current A 0.35/0.33 0.45/0.48 0.61/0.66 0.90/1.00 1.30/1.40 Rated Speed rpm 1390/1680 1350/1630 1380/1630 1380/1650 1350/1600 Striking Current A 0.73/0.66 0.86/0.79 1.47/1.34 2.13/1.95 2.90/2.70 Capacitor F 5 7 10 15 20

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

F2-Type F2F Solid Shaft 1-Phase Double Voltage (Indoor Specifications)


Motor Motor Capacity Designation W 15 25 40 60 90 S15W S25W S40W S60W S90W Voltage V 200/200 200/200 200/200 200/200 200/200 Frame Frequency Hz Number 50/60 50/60 50/60 50/60 50/60 15 15 18 18 18 Rated Current A 0.18/0.17 0.24/0.23 0.29/0.34 0.42/0.47 0.62/0.67 Rated Speed rpm 1360/1620 1340/1600 1340/1610 1370/1640 1340/1600 Striking Current A 0.35/0.32 0.48/0.44 0.64/0.61 1.07/0.98 1.46/1.36 Capacitor F 1.0 1.5 2.5 3.5 5

Cautions for Safety

Option

E107

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Caution for Safe Operation


Installation Location
Indoor Specifications Ambient Temperature Ambient Humidity Altitude 1040 1,000m max. Well ventilated place free from corrosive gas, explosive gas, vapor and/or dust Indoors Water-Resistant Specifications 1040 1,000m max. Well ventilated place free from corrosive gas, Should not be used in water and the place where highhydrostatic pressure receives. Indoors/Outdoors

About Rated Current


The rated current values listed in the performance table are the area of motor. For gearmotors with brake and gearmotors with clutch/brake, the current through brake coil should also be taken into consideration. For more details, consult us.

85% max.(without any dew condensation) 100% max.(without any dew condensation)

Installation Location

Lubrication
1 All models in GTR Mini series are employed a grease lubrication
system and filled with high-grade grease before shipment from our factories. The grease contains the additive agent of extremepressure, which is equivalent to NLGI0. 2 GTR-L series is employed a grease lubrication system and applied high-grade grease on gear tooth surface before shipment from our factories. The grease contains the additive agent of extreme-pressure, which is equivalent to NLGI0.

Installation place

Installation Surface
Install the products with four bolts on a flat and machined surface free from vibration.

Mounting Position
All products can be mounted in any direction due to a grease lubrication system.

Incase of changing speed of GTR Gearmotors by using inverter (device for converting frequency)
When using a gearmotor in combination with inverter, take care that the abnormal temperature rise (over 80 at the motor surface) may occur in the low speed rotation. Also, in case of brake motor, brake failure may happen caused by the fluctuation of the voltage. In order to avoid these failures, be sure to bypass the inverter when wiring the brake. For more details, refer to page E76, "On combination of gearmotor and inverter".

Connecting with Other Equipment


1 "H7" fit is recommended for the hole for couplings, sprockets, pulleys, gears etc., when attaching to the reducer. 2 In case of direct connection, connect a reducer shaft and a shaft of the connecting machine precisely, so that the center of the shaft of both machines will be fully aligned. 3 In case of using chains, belts gears, etc. connect the units precisely, so that the shaft of the reducer and that of the other machine are parallel. Also, be sure that the centerline of the sprockets and pulleys must be perpendicular to the shaft. 4 When attaching couplings or connecting equipment to the output shaft, be sure not to give any strong impact by hammer, etc. Failure to observe this warning may cause damage to the bearings, which may lead to noise, vibration or failure.

Attachment/ Detachment of F2 Type Protective Cap


For attaching and detaching of the protective cap, lightly press the part marked with arrow. (Do not press it strongly.)

Cautions for Operation


1 Load torque, load inertia moment I (GD2) O.H.L. should always be kept within the allowable value in operation. 2 When reversing the motor, be sure to confirm if the motor is completely stopped. Failure to observe this warning may cause serious damage to gearmotors and the connecting machine by plugging. 3 When reversing a 1-phase motor, be sure to start reversing after confirming complete stop of the motor. Failure to observe this warning may cause the motor run out of control in the same direction. 4 Do not stop the motor forcibly. Failure to observe this warning may cause the motor run out of control by an unexpected reversing. 5 Be sure that the temperature of the reducer surface should never exceed 80.

E108

Technical Information

Cautions on Water-resistant Gearmotors


Oil seal with dust lip is adopted. Output Shaft SUS420J2 Water-resistant/ dust-tight box (Disassembling not permissible.) Cabtyre cable outlet. Position can be changed. (For more details, refer to P. E54.) Note)Position not modifiable by customer due to it's construction.
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Case Cover

Brake Cover (Brake motor only)

Case

O-ring

Motor Bracket

Original water-resistant/ dust-tight fabrication. Stainless steel output shaft SUS420J2 (Disassembling not permissible.) Cabtyre cable outlet. Position can be changed. (For more details, refer to P. E54.) Note)Position not modifiable by customer due to it's construction.

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Oil seal with dust lip is adopted. Jointed parts are sealed with O-rings.

Low-temperature-rise safety brake(Off brake) Stainless steel external screws

Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor

1 Suitable for the circumstances where water fly and/or periodical cleaning by water is being done. Uses in water or

under high-hydrostatic pressure are not permitted.


2 Cabtyre cable outlet position is as shown above diagram. Modification of position by customer is not permitted due to 3 4

Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

5 6 7

it's construction. If non-standard position is required, consult us. (Refer to < P. E54 >.) Do not demount the water/dust-resistant box. Otherwise, water/dust-resistant functions will be lost. The voltage between the capacitor terminals of the 1-phase motor will become nearly twice as much as that in the power source of the motor. Therefore, be sure to insulate wires at the terminals for safety. Note that the capacitor for single-phase motor is not water/dust-resistant construction. Do not damage the lead wire inside when peeling off the outer sheath of cab tyre cable. When using the machine in the circumstance where water may spatter during operation, it is recommended to use circuit breaker for safety. For other general caustions on operation, refer to < P. E108 >.

Standard Motors

Cautions for Safety

Option

E109

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Option
Tapped Hole in Output Shaft
Output shafts with the tapped hole are available in the dimensions as seen below. Therefore when designing, direct us with these dimensions as much as possible. Since there is no tapped hole in the standard model, specify " with standard tapped hole" when ordering. "" mark in the list indicates "standard stock". "" mark indicate " more than 10 days required for the lead-time" Nonstandard tap size or water-proof specs(SUS420J2)are regarded as a special order specification. For details such as delivery or price, ask our local sales office.

GTR-Mini Series Shaft Dia. (Frame Number) SizePitchEffective Depth G-Type (Parallel Shaft) None H-Type(Right Angle Shaft) L-shaft None R-shaft None T-shaft None F2-Type F2F Solid Shaft L-shaft None T-shaft None

GTR-L Series G-Type (Parallel Shaft)

10 12 15 18 22 28 32 40

M3P0.58 M5P0.812 M6P1.015 M8P1.2520 M10P1.525

None None None None None None None

Surge Suppressor for Brake Wiring/OP-ENE471D-10A


max14 max7.5

max17

0.8 30

7.51

3.91

Appropriate for cutting off the sparks of a brake switch for AC line switching.

Thermal Protector
Attachable to prevent the motor from burning. (For more details, refer to P. E24.)

Gearmotor with simplified brake/Reversible Gearmotor


brake is attachable to GTR Mini-Series Gearmotors(with motor). motor can be arranged to GTR-L Series Gearmotors (with motor). For more details, refer to P. E32.
Reversible Simplified

E110

Technical Information

Torque Arm for F2 Type F2S (Hollow Shaft)


I F
Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake

C E E D 3-H B A A G

Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

Model Number Frame Number TAF2S-12 TAF2S-15 12 15

A 43 48

B 24 30

C 37.5 56.5

D 7 9

E R7 R9

F R9 R11

G 3.2 3.2

H 8.4 10.5

I 7 9
With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

Torque Arm Specificaiton


Model Number Frame Number Weight (g) Material Surface Treatment TAF2S-12 TAF2S-15 12 15 75 125 SS41 uni-chrome coating Color white

Optional Parts Exclusively for Speed Control Gearmotor


Extention Cord with Connector

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake

Model OP-C1
VCTF-F60.3

m 1 2 3 4

Technical Information

OP-C2 OP-C3 OP-C4

Standard Motors

Use for extenting cord for U-Type. The length of lead wire between controller and gearmotor should be less than 5m.

Cautions for Safety

External Resistor for Instant StoppingOP-RWH10

Option

26 67 77

3.5

Use when instant stopping function is require.

E111

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Technical Information
Standard Motors Cautions for Safety Option

Option
Surge SuppressorOP-ENE471D-10A
max14 max7.5

max17

0.8 30

7.51

3.91

Appropriate for cutting off the sparks of a brake switch for AC line switching. Common to Surge Suppressor for Brake Wiring

Noise FilterOP-ZMB
3

In case of blocking the entering noise In case of keeping the noise not to go out

E 40 50 30

4 E

2 200 20 20

Controller Power Source Terminal

20 300 45 300

20

Surface Connection Socket/OP-8PFA

8-M3.5

7.8

2-4.5 5 81 4

4 2-M4 or 4.5 35.4 118 40 Manufacturing Diagram for Mounting Hole

4 40 51 24

Surface Connection Socket at Installed (Photo indicates SPC-103L.)

External Speed Setter/OP-RV-24B20K


13 0.2 0.4 M30.5
40 50 30 60 70 80 90 0 100

12 2.80.2 3.2 9.5

24 40

15.9

20 10

Dial Board MIN35 Insulator Film Switch 40

10

Adjustable Resistor B20K 100.5 Manufacturing Diagram for Mounting Hole

Attached to P-Type Controller as a standard accessory(1 set). Use when doing a multi shift transmission.

E112

Parallel Shaft Performance Table/ Dimension Gearmotor with Brake Waterresistant Gearmotor with Brake Speed Control Gearmotor Gearmotor with Clutch /Brake GT-Type Gearmotor with Brake Right Angle Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension Gearmotor with Brake

With Waterresistant Brake Motor Speed Control Gearmotor Parallel Shaft GTR-L Series Performance Table/ Dimension Reversible Gearmotor with Brake Speed Control Gearmotor with Brake Technical Information

Standard Motors

Cautions for Safety

Option

E113

Technical Information

Guidance to NISSEI's Website


Visit NISSEI's Website and Register Yourself

http://www.nissei-gtr.co.jp/
"The following items are available on NISSEI's website."
GTR model selection and product details Request for catalogs Downloadable drawings of external dimensions Downloadable CAD data PDF date on a variety of catalogs and operation manuals Information on new products Registration for the information dispatch system Make full use of NISSEI's website. For details, contact your NISSEI representative or NISSEI sales staffs.

Tokyo Branch Office Sales, Overseas Section


Main switchboard TEL : +81-566-92-5312 +81-566-92-7002 FAX : E-mail : oversea@nissei-gtr.co.jp

2-8-9 Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032 Japan

TEL : +81-3-3865-7681FAX : +81-3-5820-7693 E-mail : tokyo@nissei-gtr.co.jp

Osaka Branch Office

1-18 Ikutamamaemachi, Tennoji-ku, Osaka 543-0072 Japan

TEL : +81-6-6772-1900FAX : +81-6-6772-0406 E-mail : osaka@nissei-gtr.co.jp

Honbu Sales Office

1-1 Inoue, Izumi-cho, Anjo-shi, Aichi 444-1297 Japan

TEL : +81-566-92-7410FAX : +81-566-92-7418 E-mail : honbu@nissei-gtr.co.jp

Você também pode gostar