Você está na página 1de 2

Microtherm SlimVac Vacuum insulation panel

Microtherm SlimVac panels are high performance microporous insulation covered in an impermeable polymer outer envelope which is heat sealed under vacuum to optimize the thermal performance. The core of the SlimVac panel insulation is a blend of lament reinforced silica and an opacier to block the infrared radiation. The outer envelope is an ultra low permeation barrier lm that comprises multiple metalized polymer layers. Exact barrier lm specication may vary according to the application. Microtherm SlimVac core material is non combustible and complies to the requirements of DIN4102. It is environmentally safe and completely recyclable.
Properties Very low TC value of 4.2 mW/m.K High R-value (4.8 m2K/W per 20mm) Lightweight & thinnest insulation available. No need for getter material. Stable long term thermal performance. Environmentally safe, contains no respirable bres Excellent resistance to compression Applications Refrigerators and freezers Temperature controlled packaging Refrigerated transport Building: o Facades elements o Floor and roof insulation o Terrace insulation o Doors o Thermal bridges o Cold rooms

Microtherm is a world leader for thermal insulation solutions info@microthermgroup.com www.microthermgroup.com

Microtherm SlimVac
T Y PI C A L P R ODUCT CH AR ACT E R I S T I CS

Size Availability
Microtherm SlimVac panels are available in thicknesses from 6 mm () up to 40 mm (1 ) and in panel sizes up to a maximum of 1400 mm x 800 mm (approx 55 1/3x 31 3/5) at the larger thicknesses. Please contact our Technical Service Department for further details.

Performance
TC value at vacuum level < 5 mbar: 4.2 mW/m.K (according to ASTM C 518 & ISO 8301) at mean temperature 10 C (50 F). TC value without vacuum is 21 mW/m.K at normal ambient conditions. U-value for thickness 20 mm: 0,21 W/m2K R-value for thickness 20 mm: 4.8 m2K/W

Manufacturing Tolerances
Tolerances on length & width +3.0 /-1.0 mm (+1/8/- 0.04) for thickness 15.0 mm ( 5/8). +3.0 /-1.5 mm (+1/8/- 1/16) for thickness 15.1 - 30.0 mm (5/8- 1 ). +4.0 /-2.0 mm (+3/16/- 0.08) for thickness > 30.0 mm (> 1 ) . For alternative tolerance requirements, please contact our Technical Service Department. (The above given inch dimensions are indicative only and not claimed to be exact equivalents.)

Density
Nominally 160 - 220 kg/m3 according to specication.

Standard nish styles available


The standard nish is as made with slightly rounded edges and seal anges on all four sides. Alternatively, Microtherm SlimVac may be ordered with seal anges neatly taped back and retained. For alternative nish requirements contact our Sales Department for advice.

Typical Values
Performance values quoted here are for general guidance. For more precise information and assistance with design please contact our materials specialists.

The information contained in this datasheet/brochure is intended to assist in designing with Microtherm products. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or tness for a particular purpose or that the results shown on this datasheet will be achieved by a user for a particular purpose. The user is responsible for determining the suitability of Microtherm products for each application.

www.microthermgroup.com

Issue ref.08092011/05

Microtherm is a registered trademark of Microtherm International Ltd BTW-BE-0407.566.878 RPR Sint-Niklaas

102960

Microtherm NV Belgi, Industriepark Noord 1, BE-9100 Sint-Niklaas, T +32 (0)3 760 19 80, F +32 (0)3 760 19 99, info@microthermgroup.com Microtherm Inc U.S.A., 3269 Regal Drive, Alcoa, Tennessee 37701, T +1 865 681 0155, F +1 865 681 0016, sales@microtherm.us Nippon Microtherm Co. Ltd. Japan, Korakuen Shinjuku Bldg, 4-15-7, Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023, T +81 3 3377 2821, F +81 3 3378 2821, sales@microtherm.co.jp

Você também pode gostar