Escolar Documentos
Profissional Documentos
Cultura Documentos
1 Power Up
PLUG IN JAWBONE FOR 50 MIN UTES ( YES , TH ERE S AN AC ADAPTER IN TH E BOX)
2 Pair
PHONE B LU ETOOTH SET TING : ON JAWBONE AUTOMATICALLY GOES INTO PAIRING MODE FIRST TIME ON ALL OTHE R TIMES: HOLD JAWBONE TALK AN D NOISE ASSASSIN BUT TONS: 2 SECONDS
INDICATOR LIG HT FL ASHES RE D + WHITE PHONE : SE ARCH FOR NEW DEVICES SE LEC T JAWBONE , E NTE R PASSCODE 0000
3 Share
MAKE THAT CALL (GO CHANG E THE WORLD, WE KNOW YOU CAN)
Jawbone Overview
a b
c d e
Both Talk Button and NoiseAssassin Button are hidden beneath the external face of the headset. To activate either button, simply press on the areas indicated above.
note
The medium sized earloop and earbud are already fitted to your Jawbone at the factory.
1 Charging
You can charge your Jawbone headset via the wall charger, or via USB on your computer. Place the Jawbone headset in the socket with the jawbone logo facing upward.
Charge the battery fully on first use. Charge time 50 minutes. 80% charge after 35 minutes. Indicator light is RED while headset is charging / WHITE when headset is fully charged. Indicator light flashes RED when battery is low.
(continue to page 2)
2 Pairing
Your Jawbone headset automatically goes into pairing mode the first time you turn it on. In pairing mode, the indicator light flashes RED + WHITE
to pair for the first time
Turn on your phones Bluetooth setting Press the Talk Button for 2 seconds Search for New Devices Select Jawbone Enter passcode 0000
Hold down the Talk Button and NoiseAssassin Button for 2 seconds until the indicator light flashes RED + WHITE. (Headset must be powered off to initiate). Pairing mode lasts for 3 minutes, or until successful pairing.
3 Fit
Jawbone comes with 4 earloops and 3 earbuds for maximum comfort. To wear Jawbone, tuck earloop behind your ear, place earbud snugly inside your ear, and rest Voice Activity Sensor on your cheek as shown in the diagram.
Jawbones patented NoiseAssassin requires contact with your face. Make sure the Voice Activity Sensor (VAS) is touching your face. If the VAS doesnt touch your cheek, the headset will not work properly.
4 Talk
Turn the Jawbone headset on or off by pressing the Talk Button for 2 seconds. To answer
a call , press the Talk Button.
To chang e the volu me during a call, press the NoiseAssassin Button to cycle through the multiple volume levels. To turn noiseassassin off or back on during a call, press the NoiseAssassin Button for 2 seconds. note NoiseAssassin is always on by default.
5 More
To initiate voice dialing , press the NoiseAssassin Button for 2 seconds in standby mode and then speak a command. To redial l ast n u mb er called, triple-tap the NoiseAssassin Button. To tu rn off the led , press the Talk Button 5 times while in standby mode. To answer an incoming press the Talk Button.
call while on a call ,