Escolar Documentos
Profissional Documentos
Cultura Documentos
SubNetwork Id
INTEGER: 0 to 4095
41
BTS_NAME
NE_ID
NE_IP
SDR_TYPE
BTS Name
NE ID
NE IP Address
SDR Type
80 characters at most
BS8700,BS8800 GU360,BS8800 U240,BS8800 INTEGER: 0 to 65535. O&M IP of Node B, U120,BS8800 should be unique in the should be unique in the U120A,BS8900 whole subnetwork. whole network GU360,BS8900 Index of all sheets U240,BS8800 GU360 E,BS8900 GU360 E,BS8900A,BS8906
MP08BDNGR012&Chirola
95
118.41.95.100 BS8900A
SDR_VERSION
RNC_ID
BSC_ID
LONGITUDE
LATITUDE
RNC ID
BSC ID
Longitude
Latitude
INTEGER: 0 to 4095. 4.09.21.05,4.09.21.05P GSM single-mode base 01 station does not need to fill in.
INTEGER: 0 to 65535. RANGE: -180 to 180. UMTS single-mode Accurate to six digits base station does not after the decimal point need to fill in.
RANGE: -90 to 90. Accurate to six digits after the decimal point
4.09.21.05P01 65535
41
180.0
90.0
LOCATION
VENDOR_NAME
USER_DEFINED_STATE
Location
Vendor Name
zte
MP08BDNGR012&Chirola
NE_ID
RADIO_MODE
CC_SLOT
FS_SLOT
PM_SLOT
NE ID
Radio Mode
CC Slot
FS Slot
PM Slot
Pattern:slot,... Slot INTEGER: 0 to 65535. range: 1,2; Configured should be unique in the UMTS,GSM,GSM+UM as "1,2" if there are two whole subnetwork. TS CC boards. The board Index of all sheets in slot 1 must be configured.
Pattern:slot,... Slot Pattern:slot,... Slot range: 14,15; range: 3,4; Configured Configured as "14,15" if as "3,4" if there are two there are two PM FS boards. boards.
95
GSM
14
BPC_SLOT
UBPG_SLOT
SE_SLOT
TAM_BOARD
TAM_SLOT
BPC Slot
UBPG Slot
SE Slot
INTEGER: 5 to 8
TAM_WORKING_CURRENT
UES_SLOT
RACK_TOPOLOGY
BATTERY_SAVING
EPM_PWR_TYPE
Rack Topology
INTEGER: 3 to 8
Pattern:1-RU-RU-...,1RU-RU-... For example, "1-2-3,1-4,151-52" means RSU2 and RSU4 and RRU51 connect with the main Y:Function opened, rack, RSU3 connects N:Function closed with RSU2, RRU52 connects with RRU51. Each optical port cascade up to four RU. Keep blank if there is no cascade connection.
1-2,1-4,1-6
ZXDU45-75
EPM_DEAL_MODE
0:Transparent transmission,1:Parse
NE_ID
NTP_SERVER_IP
TIME_ZONE
SUMMER_TIME_START
SUMMER_TIME_END
NE ID
Time Zone
INTEGER: 0 to 65535. should be unique in the IPV4 whole subnetwork. Index of all sheets
Pattern: MM-DD Pattern: MM-DD Please refer to the help HH:mm, Fill in '0' if not HH:mm, Fill in '0' if not documentation used used
95
139.41.0.254
GMT + 5:30
NE_ID
CLOCK_ID1
CLOCK_ID2
CLOCK_ID3
CLOCK_SYNC_MODE
NE ID
0:GSM/UMTS Frequency Sync; 1:GSM FrameNumber INTEGER: 0 to 65535. Sync. UMTS GPS,BITS-2MHz,BITS- GPS,BITS-2MHz,BITS- GPS,BITS-2MHz,BITSshould be unique in the Frequency Sync; 2Mbps,Line,1588,Sync 2Mbps,Line,1588,Sync 2Mbps,Line,1588,Sync whole subnetwork. 2:GSM Frequency E E E Index of all sheets Sync. UMTS FrameNumber Sync; 3:GSM/UMTS FrameNumber Sync
95
Line
GPS_CABLE_TYPE
GPS_RECEIVER_TYPE
GPS_FEEDER_DELAY
INTEGER: 0 to 32767
NE_ID
TRANSMISSION_TYPE
TRANSMISSION_MEDIUM ETHERNET_WORK_MODE
FE_BANDWIDTH
NE ID
Transmission Type
IP Transmission Medium
FE/GE BandWidth(kbps)
INTEGER: 0 to 65535. should be unique in the IP,ATM,ATM+IP whole subnetwork. Index of all sheets
95
IP
E1
FE_LINK_TYPE
OMCB_GATEWAY_IP
OMCB_QOS
OMCB_IP_NO
IPCLK_SYNC_SERVER_IP
OMCB Qos
OMC-B IP No.
RNC/BSC/CN,SDR
IPV4
BE: Try the best. EF: EF service, Expedited Forwarding, Minimum Delay, Maximum flow. AF42: Class-4 service with medium discarding priority. AF22: Class-2 INTEGER: 0 to 19, service with medium existed in IP sheet. discarding priority. AF43: Class-4 service with high discarding priority. AF23: Class-2 service with high discarding priority
Must be configured for IP 1588 clock reference source(GIPI interface IP). Valid only when it is IP over Ethernet transmission type.
118.41.0.1
BE
IPCLK_IP_NO
IPCLK_QOS
1588 IP No.
Ip Clock Qos
BE,EF,AF42,AF22,AF4 3,AF23
NE_ID
IP_NO
IP_VLAN_ID
IP_VLAN_IP_ADDR
IP_VLAN_MASK
NE ID
IP No.
IP Vlan No.
IP VLAN IP Address
IPV4
INTEGER: 0 to 65535. should be unique in the INTEGER: 0 to 19 whole subnetwork. Index of all sheets
95
IP_VLAN_GATEWAY
PPP_NO
PPP_HDLC_NO
PPP_IP_ADDRESS
PPP_PROTOCOL
IP VLAN Gateway IP
IPV4
PPP No.
INTEGER: 0 to 7. MLPPP: 0 to 2
Pattern: hdlc No.,... PPPoE ip address. hdlc No.:0 to 15, 8 links "0.0.0.0" represents at most automatic allocation.
PPP,ML-PPP
118.41.95.100 ML-PPP
PPP_LINK_TYPE
PPP_COMPRESSION
MP_HEAD
MP_PRIORITY
MP Head
MP Priority
RNC/BSC/CN,SDR
LONG,SHORT,INVALI 1,2,3,4,INVALID D
RNC/BSC/CN
SHORT
NE_ID
SCTP_NO
SCTP_RADIO_MODE
SCTP_LOCAL_PORT
SCTP_REMOTE_PORT
NE ID
SCTP No.
INTEGER: 0 to 65535. should be unique in the INTEGER: 0 to 3 whole subnetwork. Index of all sheets
GSM,UMTS
95
GSM
95
14598
SCTP_REMOTE_IP
SCTP_INOUT_STREAM
SCTP_QOS
SCTP_IP_NO
PATH_DOMAIN
SCTP Qos
IP No.
Path Domain
IPV4
INTEGER: 1 to 6
BE: Try the best. EF: EF service, Expedited Forwarding, Minimum Delay, Maximum flow. AF42: Class-4 service with medium discarding priority. AF22: Class-2 INTEGER: 0 to 19, service with medium existed in IP sheet. discarding priority. AF43: Class-4 service with high discarding priority. AF23: Class-2 service with high discarding priority
INTEGER: 0 to 3, 255:Invalid. UMTS multi-path parameter, OMCR docking parameter is: Omcb Path-Omcb Module
97.146.166.93 2
EF
255
NE_ID
HDLC_NO
E1T1_LINK_ID
E1T1_LINK_TYPE
HDLC_TIMESLOT_MAP
NE ID
HDLC No.
HDLC Timeslot
INTEGER: 0 to 65535. should be unique in the INTEGER: 0 to 15 whole subnetwork. Index of all sheets
Pattern:start of time slot-end of time slot,... Slot 1 to 31(T1 is 24) can be used. Slot 0 is excluded.
95
RNC/BSC/CN
1-31
TSI_IN_TIMESLOT_MAP
TSI_OUT_LINK_ID
TSI_OUT_TIMESLOT_MAP
TSI In Timeslot
The pattern is same as The pattern is same as HDLC timeslot. The HDLC timeslot. can not INTEGER: 0 to 15. number of out&in overlap with the HDLC should be filled in case timeslot must be timeslot. should be of time slot identical. should be filled in case of time interchange, otherwise filled in case of time slot interchange, keeping empty. slot interchange, otherwise keeping otherwise keeping empty. empty.
NE_ID
RU_NO
RRU_NAME
RADIO_MODE
BOARD_TYPE
NE ID
RU No.
RU Name
Radio Mode
Board Type
INTEGER: 0 to 65535. 60 characters at most, should be unique in the RSU2 to 25, RRU: 51 can be blank. without whole subnetwork. to 74 <>&'" Index of all sheets
95 95 95
4 6 2
DOWNLINK_FREQ
UPLINK_FREQ
FS_PORT
OPTICAL_MODULE_TYPE
RX_EXTENSION_RU
FS Port
Rx RF Extension RU No.
Multiple of 0.2MHz. 0 or blank represents Multiple of 0.2MHz. 0 or automatical calculation blank represents First FS: 0 to 5, Second by Node B. When automatical calculation FS: 20 to 25 downlink frequency is by Node B not 0, uplink frequency should not be 0.
1.25G,2.5G. R8880,R8882,R8890,R SU82 series can set 2.5G. All of RU linked to same FS port must be identical.
The frequency band of associated RU should be identical. Each RU can only be associated once.
0 0 0
0 0 0
2 4 0
RX_PORT_ANTENNA
ANTENNA_TYPE
TM_TYPE
RX_POWER_GAIN
TX_POWER_GAIN
Antenna Type
N: Does not connect to an antenna, Y: connect ANT:Normal Antenna, to an antenna. If setting RET:Aisg Y, Rx RF Extension RU can not set.
TMA,A-TMA,ETMA,AETMA. This parameter and the following four parameters is valid when the antenna is RET.
TMA:110 to 130(0.1dB); A-TMA:44 to 100(0.25dB); ETMA:230 to INTEGER:70 to 170; 250(0.1dB); AInvalid:255 ETMA:92 to 100(0.25dB); Invalid:255
Y Y Y
TMA_NOISE
LINE_LOSS
FCE_BOARD
Tower Top Tower Top Amplifier Noise Amplifier Feeder Coefficient(0.1dB) Cable Loss(0.1dB)
INTEGER: 10 to 30
INTEGER: 0 to 80
FCE5
NE_ID
GRU_NO
GW_CONFIG_MODE
CARRIER_GROUP
CARRIER_NUMBER
NE ID
GSM RU No.
Carrier Group
INTEGER: 0 to 65535. should be unique in the whole subnetwork. Index of all sheets
RSU2 to 25, RRU: 51 4G+1U,2G+2U,INVALI to 74The second PA INTEGER: 0 to 32. DSingle radio mode of R8882RSU82 0:Do not group is INVALID. is:'RU No.#2'
95 95 95
2 4 6
1 2 3
2 2 2
CARRIER_POWER_PARA STATIC_POWER_LEVEL
SECTOR_ID_1
TRX_NUMBER_1
SECTOR_ID_2
Carrier Power(W)
INTEGER: 1 to 80
0db,2db,4db,6db,8db,1 0db,12db,14db,16db,18 The Id should exist in db,20db. -0.2db,-0.4db,GSM Sector sheet, 0.6db,-0.8db,-1.0db,255:invalid 1.2db(only TTR and RSU02)
INTEGER: 1 to 6
Same as sector 1
20 20 20
1 2 3
2 2 2
TRX_NUMBER_2
SECTOR_ID_3
TRX_NUMBER_3
SECTOR_ID_4
TRX_NUMBER_4
Same as sector 1
Same as sector 1
Same as sector 1
Same as sector 1
Same as sector 1
SECTOR_ID_5
TRX_NUMBER_5
SECTOR_ID_6
TRX_NUMBER_6
SUB_FREQ_BAND
Same as sector 1
Same as sector 1
Same as sector 1
Same as sector 1
INTEGER: 0 to 3. 0 or 255:invalid
NE_ID
SECTOR_ID
GPS_OFFSET
POINT1_RU_NO
POINT2_RU_NO
NE ID
Sector No.
GPS Synchronous High speed railway High speed railway Frame Header cell entry point 1 cell entry point 2 Offset RU No. RU No.
INTEGER: 0 to 50 Can be blank Can be blank
INTEGER: 0 to 65535. should be unique in the INTEGER: 1 to 24 whole subnetwork. Index of all sheets
95 95 95
1 2 3
0 0 0
NE_ID
SECTOR_ID
TRX_NO
CHANNEL_MODE ARRIER_NUMBER_OF_LOGIC_FREQ C
NE ID
Sector No.
Channel Mode
SINGLE:Single channel, DUAL:Dualchannel, MULTI:Multichannel
INTEGER: 0 to 65535. should be unique in the INTEGER: 1 to 24 whole subnetwork. Index of all sheets
95 95 95 95 95 95
1 1 2 2 3 3
1 2 1 2 1 2
1 1 1 1 1 1
CARRIER_GROUP
FREQ_BAND
SUB_FREQ_BAND
USE_IRC
EXTENSION_CARRIER
Carrier Group
Frequency Band
Use IRC
Extension Carrier
1 1 2 2 3 3
VIII) 255 VIII) 255 VIII) 255 VIII) 255 VIII) 255 VIII) 255
1 1 1 1 1 1
N N N N N N
NE_ID
DRY_CONTACT_POSITION
DRY_CONTACT_NO
NE ID
INTEGER: 0 to 65535. should be unique in the whole subnetwork. Index of all sheets
SA,SE,FCE,FCE-II,FCEIII,FCEA,FCEA-II,FCE3,FCE5,FCE5II,FCE5-III. If position is RU, the pattern is RU-No., example:RU-51. For the FCE series, please refer to the help documentation.
The SA/SE board supports 8-way input, the number range is 0 to 7. FCE3 is 0 to 7, FCE5 is 0 to 6, FCE and FCEA is 0 to 4, R8880A-U2112 is 0 to 2, other RF board is 0 to 3.
95 95 95 95 95 95 95 95
SA SA SA SA SA SA SA SA
4 7 0 2 3 5 6 1
DRY_CONTACT_TYPE
DRY_CONTACT_CONTENT
ALARM_STATUS
198092044:Cabinet door alarm,198092045:Flooding alarm,198092046:Smoke alarm,198092047:Infrared alarm,198092048:Air-condition fault,198092049:Surge Protection Input:Input dry contact, Output:Output Device fault,198092051:PSU dry contact. Output dry contact alarm,198092052:PSU fan should be linked to contact No.6 or 7 alarm,198092068:Base station of SA/SE. master power supply break alarm,198092206:Battery alarm,198092207:AC power-cut alarm,198092208:Rectifier model alarm,198092209:Thermoelectric cooling alarm,198092550 to 198092599:User Defined Alarm
Valid only if type is input. OPEN:Alarm appears if contact is open, CLOSE:Alarm appears if contact is closed
OUT_CONTACT_TYPE
Valid only if type is output. 0:Output low level, 1:Output high level
0 0 0 0 0 0 0 0