Escolar Documentos
Profissional Documentos
Cultura Documentos
1/72
Table of contents
Content Features, technical data General notes, engineering software ICS Forces, areas Mounting types Ordering code Position of line ports Explanations Cylinder data Piston 40 Piston 50 Piston 63 Piston 80 Piston 100 8 to 13 14 to 19 20 to 25 26 to 31 32 to 37 Page 2 2 3 4 5 6 7 Content Piston 125 Piston 150 Piston 180 Piston 200 Weight Permissible stroke lengths Calculation of buckling, stop tube extension installation lengths and position tolerances Inductive proximity switch Proximity switch, technical data Seals, end position cushioning Calculation of braking force Spare parts drawing Page 38 to 43 44 to 49 50 to 55 56 to 61 62 63 to 65 66 67 68 69 70 71 72
Engineering software Interactive Catalog System Online Information on available spare parts: www.boschrexroth.com/spc Brochure download www.boschrexroth.com/ics www.boschrexroth.com/ business_units/bri/de/downloads/ihc
2/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Features
Service-friendly modular construction kit system, mounting of head and cap according to the tie rod principle Operating pressure up to max. 210 bar 16 mounting types Piston : 40 to 200 mm Piston rod : 16 to 140 mm Note! For the selection of the cylinder variant, please observe the Explanations on page 6!
Technical data (for applications outside these parameters, please consult us!)
Nominal pressure: 210 bar [21 MPa] Static test pressure: Permissible operating pressure x 1.3 (depending on piston and type of mounting) Maximum operating pressure: 210 bar [21 MPa] (depending on piston and type of mounting) The given operating pressures are valid for applications with jerk-free operation. In the case of extreme loads, e.g. rapid cycle sequence, mounting elements and threaded piston rod connections must be rated for durability. Installation position: Optional Hydraulic fluid: Mineral oils DIN 51524 (HL, HLP) Phosphate ester (HFD-R) Hydraulic fluid temperature range: 20 C to +80 C Ambient temperature range: 20 C to +80 C Optimum viscosity range: 20 to 100 mm2/s Min. viscosity: 12 mm2/s Max. viscosity: 380 mm2/s Cleanliness class to ISO Permissible maximum degree of contamination of the hydraulic fluid to ISO 4406 (c) Class 20/18/15. The cleanliness classes specified for components must be adhered to in hydraulic systems. Effective filtration prevents malfunction and, at the same time, prolongs the service life of components. For the selection of filters, see data sheets RE 50070, RE 50076, RE 50081, RE 50086, RE 50087, RE 50088. Stroke velocity: Up to 0.5 m/s (depending on line connection) Bleed points standard Tolerances: For stroke tolerances, permissible installation lengths and position tolerances, see page 67. Primer coating: As a standard, hydraulic cylinders are primered with one coating (color: gentian blue, RAL 5010) in a thickness of max. 80 m. The following surfaces on cylinders and attached parts are not primered or paint-coated: All diameters of fit to the customer side Sealing faces for the line connection Sealing faces for flanged connections Inductive proximity switches Surfaces that are not paint-coated are protected by an anticorrosion agent (MULTICOR LF 80). Acceptance: Each cylinder is tested according to Bosch Rexroth standard.
General notes
Safety notes: For the installation, commissioning and maintenance of hydraulic cylinders, observe operating instructions RE 07100-B! Servicing and repair work must be carried out by Bosch Rexroth AG or personnel having undergone special training in this field. No warranty is granted for damage resulting from installation, maintenance or repair work not carried out by Bosch Rexroth AG. Checklists for hydraulic cylinders: Cylinders, the operating data of which differ from the specified values, can only be offered as special variants on request. For the preparation of offers, the deviations of technical data and/or operating data must be described in the checklists for hydraulic cylinders (RE 07200).
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
3/72
22.10
Piston Operating pressure in bar Piston rod 75 100 150 210 Piston area Annulus area Area ratio Cushioning area Piston side Piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side
mm mm kN kN kN kN kN kN kN kN cm2 cm2 cm2 cm2 36.40 40.07 1.25:1 84.20 60.14 40.10 30.07 36
80 45 37.70 25.77 50.27 34.36 75.40 51.54 210.56 72.15 50.24 34.34 1.4:1 30.63 30.60 20.10 57.30 25.62 2:1 62.60 38.45 93.95 25.63 62.63 19.22 46.97 56 45
100 50 58.91 44.18 78.54 58.91 117.81 88.37 164.94 78.50 58.88 58.90 54.70 31.97 92.50 1.25:1 1.35:1 2:1 1.2:1 30.05 77.31 70 50 56
125 63 92.04 73.57 68.66 91.55 44.33 59.11 122.72 40.06 103.08 98.10 184.08 60.10 154.63 147.13 137.32 88.66 257.71 122.66 40.04 103.03 98.04 91.50 59.08 2:1 47.20 1.25:1 1.35:1 92.50 92.50 47.20 90
Piston Operating pressure in bar Piston rod 75 100 150 210 Piston area Annulus area Area ratio Cushioning area Piston side Piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side Force; piston side Force; piston rod side
150 80 100 80 132.54 176.72 265.08 371.10 176.63 1.25:1 1.4:1 1.8:1
180 90 190.85 254.47 381.70 534.39 254.34 1.25:1 1.35:1 193.6 2:1 125 90
200 100 235.62 314.16 471.24 659.74 314.00 1.25:1 1.35:1 235.60 2:1 140
kN 145.55 138.24 126.45 98.18 204.21 190.85 131.75 250.56 235.63 160.23 kN 218.33 207.38 189.68 147.28 306.32 286.28 197.63 375.85 353.45 240.34 kN 305.65 290.32 265.55 206.20 428.85 400.80 276.70 526.18 494.83 336.50 145.47 138.17 126.38 98.13 204.10 190.75 131.68 250.42 235.50 160.14 126.50
4/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Mounting types
Self-aligning clevis at cylinder cap Trunnion at cylinder cap
B
Fork clevis at cylinder cap
S
Foot mounting
G
Rectangular flange at cylinder head
F
Foot mounting with splined key
C
Square flange at cylinder head
L
Foot mounting with seal ring for subplate mounting
H
Rectangular flange at cylinder cap
M
Threaded bores in cylinder head and cap
D
Square flange at cylinder cap
N
Foot mounting at front face with splined key
K
Trunnion at cylinder head
T
Extended tie rods at cylinder cap
R
Trunnion at the center of the cylinder
P
Trunnion at the center of the cylinder
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
5/72
Ordering code
Cylinder Single-rod cylinder CD Double-rod cylinder CG Series = = = 210 A= T=
210
Z 1X
Enter stop tube extension Seals Standard version Version for lowfriction operation
Mounting types Self-aligning clevis at cylinder cap = B Fork clevis at cylinder cap =G Rectangular flange =C at cylinder head Square flange at cylinder head =H Rectangular flange =D at cylinder cap Square flange at cylinder cap =K Trunnion =R at cylinder head Trunnion at the center of the cylinder 1); 2) = E Trunnion at cylinder cap =S Foot mounting =F Foot mounting with splined key = L Foot mounting with seal ring for subplate mounting =M Threaded bores in cylinder head and cap =N Foot mounting at front face with splined key =T Extended tie rod at cylinder head =P Extended tie rod at cylinder cap =Q Piston (40 to 200 mm) see page 3 Piston rod (16 to 140 mm) see page 3 Stroke length in mm 3) Component series 11 to 19 = 1X (11 to 19 unchanged installation and connection dimensions)
1)
Pipe connectioncylinder cap Enter position Observe table on page 6 Pipe connectioncylinder head Enter position Observe table on page 6! M= V= U= K= S= D= B= C= E= F= T = 6) L = 7) M = 7) H= C= 00 = 01 = 02 = 13 = 5) 14 = 5) Hydraulic fluid Seals, suitable for mineral oil to DIN 51524 (HL, HLP) (FKM) seals suitable for Phosphate ester (HFD-R) End position cushioning Without (View "Y") on cap side (View "X") on head side On both sides Piston rod end Male thread, see pages 8 to 61 Male thread, see pages 8 to 61 Female thread Thread for self-aligning clevis With self-aligning clevis CGK mounted With self-aligning clevis CGA mounted With self-aligning clevis CGAK mounted
Piston rod variant Hardened and chromium hard-plated up to piston rod 100 mm Chromium hard-plated, from piston 80 mm Pipe connection 4) Flanged connection with seal ring; only possible with type of mounting "M" Pipe thread to ISO 228/1 Metric ISO thread Enlarged pipe connection Pipe thread to ISO 228/1 Enlarged pipe connection Metric ISO thread
2)
The position of the trunnion can be freely selected. Always indicate dimension XV in clear text in mm on the order. Dimension for cylinder with trunnion and piston rod extension LY in the retracted condition:
LY
3) 4)
WH
5)
XV
6) 7) 8)
Observe permissible stroke length, pages 63 to 65 The pipe connection sizes are assigned to the piston .
Not possible with piston 200 mm Only possible with 40/16 to 180/80 Only possible with 180/90 to 200/140 Always state mounting of inductive proximity switches or piston rod extension LY in clear text on the order.
In the case of special variants, an X must be entered at the relevant place in the type code, and an SO number must be added at the end.
6/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
1 4 3 2
Selectable position of line ports Mounting types B 1 At cylinder head 2 3 4 1 At cylinder cap 2 3 4 C 1 2 3 4 1 2 3 4 D 1 2 3 4 1 2 3 4 E 1 2 3 4 1 2 3 4 F 1 2 4 1 2 4 G 1 2 3 4 1 2 3 4 H 1 2 3 4 1 2 3 4 K 1 2 3 4 1 2 3 4 L 1 2 4 1 2 4 M 3 3 N 1 2 4 1 2 4 P 1 2 3 4 1 2 3 4 Q 1 2 3 4 1 2 3 4 R 1 3 1 2 3 4 S 1 2 3 4 1 3 T 1 2 4 1 2 4
= Position 2 and 4 not possible for: Piston 40 with enlarged pipe connection 13 and 14 = Position 2 and 4 not possible for piston 40; 50 and 63
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
7/72
8/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 KK WH 34,5
1, 22, 23
D1; 0,5 EE
20
17,5
30
13 A
12 A-A
16
46
63
B3 A
10
45 XN + X*
38
10 40
7,5
15
63
10 12
Type of mounting G
14, 15
WH
1
21
R1 6
13
12 A-A
63+1,4
17
XC + X*
42
15
A
H7 12,7 f7
20 +0,5 44 56
Type of mounting C
Operating pressure with piston rod 16 and 18: 180 bar on cap side; 210 bar on piston rod side Operating pressure with piston rod 25: 110 bar on cap side; 210 bar on piston rod side
14, 15
WH VD
1, 22, 23
17,5 MA = 40 Nm
13
12
11
M10
63 41,5
63+1,4
24
X
63 87,5 110 ZM + 2 x X*
Y
WH + X*
RD
10
ZJ + X*
38
10
Piston rod 16 18 25
KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 max. tensile load 13 kN
A Thread version C, E, B F 19 35 19 35 28 45
01 G1/2
D1 Pipe connection 01 13 02 14 34 42 34 42
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
9/72
14, 15
WH VD
1, 22, 23
RD
Y Y
10 ZJ + X* 110 87,5 63 41,5
X
WH + X* ZM + 2 x X* 41,5 63 87,5 110 11
Strokemin = 25 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
10 ZF + X*
63 41,5
63 87,5 110
Type of mounting K
14, 15
WH
1, 22, 23
13
ZF + X*
10
Piston rod 16 18 25
RD f7 28.5 32 38
VD 6 6 13
WH 16 16 25
B3 5 5 7
SW1 13 14 22
X* = stroke length
11
11
12
10/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 34,5 VD
1, 22, 23
17,5 25,4 0,03 D1; 0,5 EE
Y X
3
Y
38
63 +1,4
RD
46
R2
10 45 B3 A XG ZJ + X*
25
63,5 0,3
25
XG ZM + 2 x X*
WH + X*
13
12
Strokemin = 25 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
24 Y
R2
M10
70 +1,4 63
X
25 76 0,3 25 XV ZM + 2 x X*
32 XV ZJ + X* 10
WH + X*
13
12
Strokemin = 25 mm with thread version E (only for double-rod cylinder)
Strokemin = 10 mm Always specify dimension XV in clear text on the order (obseve XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
25,4 0,03
XJ + X* ZJ + X*
38
63
25
63,5 0,3
13
12
D1 Pipe connection 01 13 02 14 34 42 34 42
Piston rod 16 18 25
KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 max. tensile load 13 kN
A Thread version C, E, B F 19 35 19 35 28 45
01 G1/2
X* = stroke length
R2
25
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
11/72
14, 15
WH
1, 22, 23
13
8 63 3 7,5
12
24 Y
13
19
98,5 + X* ZJ + X*
31,7 h10
63 +1,4
18
X
19 106 + X* ZM + 2 x X*
WH + X*
Type of mounting L
14, 15
WH
1, 22, 23
13
12
24
5 0,2
8 0,07 ZJ + X*
31,7 h10
8 0,07 ZM + 2 x X*
5 0,2
Y
WH + X*
Type of mounting M
14, 15
WH
13
12
24
35,5
31,7 h10
Y
19 27
X
35,5 73 + X* ZM + 2 x X* WH + X*
Strokemin = 25 mm with thread version E (only for double-rod cylinder) Piston rod 16 18 25 RD f7 28.5 32 38 VD 6 6 13 WH 16 16 25 XG 48 48 57
1)
XV 1) min. 87 87 96
XV 1) max. 89 + X* 89 + X* 98 + X*
B3 5 5 7
SW1 13 14 22
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
12/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 34,5 VD
1, 22, 23
D1; 0,5 EE 17,5 MA = 40 Nm
13
12
24
7,5
RD
46
45 10 35,5 A
38 M10
31,5 0,2
X
35,5 73 + X* ZM + 2 x X* WH + X*
B3
M10 73 + X* ZJ + X*
63
B2
18 63 3
10
Strokemin = 25 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
5 0,2
63 22 3
9,5
8 0,07 22,5
22 171,5 + X*
10
41,5
18 11,5
22
11,5 41,5
Type of mounting P
14, 15
M10 WH VD
1, 22, 23
13
12
24
Y
59
X
RD WH + X* ZM + 2 x X*
35 ZJ + X*
Strokemin = 25 mm with thread version E (only for double-rod cylinder) KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 max. tensile load 13 kN A Thread version C, E, B F 19 35 19 35 28 45 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
Piston rod 16 18 25
01 G1/2
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
13/72
14, 15
WH
1, 22, 23
13
12
M10
59
10 ZJ + X* 35
16
KK
10
12 -0,12 41
21
15 -0,008
21
KK
M14 SW22
22 26
B4 B1 A
16
13
8
16 -0,12
53
20 -0,010
23
28 34
61
Thread version F
18
21
30
Piston rod 16 18 25
RD f7 28.5 32 38
B4 8 8 9
VD 6 6 13
WH 16 16 25
B1 14 14 15
B2 12 12 12
B3 5 5 7
SW1 13 14 22
X* = stroke length
10
77
104
81
9
50 50
14/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 WH 40,5
1, 22, 23
D1; 0,5 EE
20
17,5
37
13
A
12
A-A
16
KK
56
76
10
B3 A
16
45
38
15 45
20
76
XN + X*
14 16 - 0,12
Type of mounting G
14, 15
WH
1
21
13
12
A-A
76 +1,4
17
R2
A
XC + X*
42 27,5 19,1
H7 f7
32,5+0,5
65 77
Type of mounting C
Operating pressure with piston rod 22 and 25: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 36: 110 bar on cap side, 210 bar on piston rod side
14, 15
WH VD
1, 22, 23
17,5 MA = 70 Nm
13
12
14
RD
M12
X
76 105 130
76 52
76 +1,4
16
ZJ + X*
38 12
WH + X* ZM + 2 x X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 22 25 36 KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2 A Thread version C, E, B F 28 45 28 45 41 55 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
01 G1/2
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
15/72
14, 15
WH VD
1, 22, 23
RD
130 105 76 52
X
WH + X* ZM + 2 x X* 14
16
ZJ + X*
52 76 105 130
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
ZF + X*
Type of mounting K
14, 15
WH
1, 22, 23
13
12
130 105 76 52
ZF + X*
16
52 76 105 130
Piston rod 22 25 36
RD f7 38 38 50
VD 6 7 10
WH 19 19 25.5
B3 8 8 8
SW1 19 22 30
X* = stroke length
14
14
16
76 52
76 105 130
16/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 40,5 VD
1, 22, 23
34,93
D1; 0,5 EE
17,5
KK
0,03
RD
56
R2
Y
38
X
3
35 35 XG
76
16 B3 XG A
45
76 0,3
WH + X* ZM + 2 x X*
ZJ + X*
13
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
MA = 70 Nm
85 76
R2
M12
X
35 89 0,3 35
38
XV ZM + 2 x X*
WH + X*
XV ZJ + X*
12
13
12
Strokemin = 10 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
34,93 0,03
76
38
XJ + X* ZJ + X*
35
76 0,3
13
12
D1 Pipe connection 01 13 02 14 34 42 34 42
Piston rod 22 25 36
KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2
A Thread version C, E, B F 28 45 28 45 41 55
01 G1/2
X* = stroke length
R2
35
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
17/72
14, 15
WH
1, 22, 23
13
8 76 2
12
76 +1,4
10
28,5
92 + X* ZJ + X*
19
20
38,1 h10
X
28,5
14
99,5 + X* ZM + 2 x X*
WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
8 0,2
38,1 h10
14 0,07
ZJ + X*
14 0,07
ZM + 2 x X*
8 0,2
WH + X*
Type of mounting M
14, 15
WH
13
12
41,5
38,1 h10
Y
19
X
41,5
27
73,5 + X* ZM + 2 x X*
WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 22 25 36 RD f7 38 38 50 VD 6 7 10 WH 19 19 25.5 XG 57 57 63.5
1)
XV 1) min.
XV 1) max.
ZJ
B3 8 8 8
SW1 19 22 30
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
18/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 40,5 VD
1, 22, 23
D1; 0,5 EE 17,5
13
MA = 70 Nm
12
RD
56
10
M12
B3 A
16 41,5
M12 73 + X* ZJ + X*
B2
24 76 3
38 0,2
45
38
X
41,5
76
73,5 + X* ZM + 2 x X*
WH + X*
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
Y
0,2-0,4 38 0,2
8 0,2
13
14 0,07 24
23,5
13,5
52
20 14
25
76 25 4,5
14 52
181 + X*
Type of mounting P
14, 15
M12 WH VD
1, 22, 23
13
12
Y
74
X
RD WH + X* ZM + 2 x X*
45
ZJ + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 22 25 36 KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2 A Thread version C, E, B F 28 45 28 45 41 55 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 34 42 34 42
01 G1/2
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
19/72
14, 15
WH
1, 22, 23
13
12
M12
74
ZJ + X*
10 45
16
KK
20 -0,010
16 -0,12 13
53
21
30
KK
28 34
B4 B1
A
16
25 -0,010
20 -0,12 17 64
20
27
10
M24 x 2 SW36
36
35 42
Piston rod 22 25 36
RD f7 38 38 50
B4 9 9 10
VD 6 7 10
WH 19 19 25.5
B1 15 15 19
B2 16 16 12
B3 8 8 8
SW1 19 22 30
X* = stroke length
12
94
126
77
Thread version F
23
104
50
50
20/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 WH 40,5
1, 22, 23
D1; 0,5 EE
20
17,5
44
13
A
12
A-A
7
16
KK
73
89
14
B3 A
16
45
38
XN + X*
15 55
25
10
89
18 20 - 0,12
Type of mounting G
14, 15
WH
1
21
13
12
A-A
89 +1,5
17
R2
A
42 27,5
XC + X*
65 77
Type of mounting C
Operating pressure with piston rod 25 and 28: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 36 and 45:110 bar on cap side, 210 bar on piston rod side
14, 15
WH VD
1, 22, 23
17,5 MA = 80 Nm
13
12
14
RD
M12
X
89 117,5 140
89 65
89 +1,5
16
38
WH + X* ZM + 2 x X*
ZJ + X*
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 25 28 36 45 KK Thread version C, E B F M20 x 1.5 M22 x 1.5 M24 x 2 M20 x 1.5 M22 x 1.5 M24 x 2 M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M30 x 2 A Thread version C, E, B F 28 55 28 55 41 65 50 65 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 34 42 34 42
01 G1/2
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
21/72
14, 15
WH VD
1, 22, 23
140 117,5 89 65
RD
X
WH + X* ZM + 2 x X* 14
16
ZJ + X*
65 89 117,5 140
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
ZF + X*
Type of mounting K
14, 15
WH
1, 22, 23
13
12
140 117,5 89 65
ZF + X*
16
65 89 117,5 140
Piston rod 25 28 36 45
RD f7 38 42 50.7 60
VD 6 6 10 13
WH 19 19 25.5 32
B3 8 8 10 12
SW1 22 22 30 41
X* = stroke length
14
14
16
89 65
89 117,5 140
22/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 40,5 VD
1, 22, 23
34,93
D1; 0,5 EE
17,5
KK
0,03
RD
73
Y
38
R2
X
9
35 89 0,3 35 XG
89
B3 XG A
10
16 45
WH + X* ZM + 2 x X*
ZJ + X*
13
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
95 +1,5 89
R2
M12
X
35 101,5 0,3 35 XV ZM + 2 x X* WH + X*
XV
38 ZJ + X* 12
13
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder)
Strokemin = 10 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
34,93 0,03
89
XJ + X* ZJ + X*
38
35
89
0,3
13
Piston rod 25 28 36 45 KK Thread version C, E B F M20 x 1.5 M22 x 1.5 M24 x 2 M20 x 1.5 M22 x 1.5 M24 x 2 M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M30 x 2 A Thread version C, E, B F 28 55 28 55 41 65 50 65
01 G1/2
R2
35
12
D1 Pipe connection 01 13 02 14 34 42 34 42
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
23/72
14, 15
WH
1, 22, 23
13
10 89
12
9
89 +1,5
14
Y
33,5 85,5 + X* ZJ + X*
25
44,4
h10
33
X
33,5 92,5 + X* ZM + 2 x X* WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
8 0,2
44,4 h10
14 0,07
ZJ + X*
14 0,07
ZM + 2 x X*
8 0,2
WH + X*
Type of mounting M
14, 15
WH
13
12
41,5
44,4 h10
Y
19 27
X
41,5
76,5 + X* ZM + 2 x X*
WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 25 28 36 45 RD f7 38 42 50.7 60 VD 6 6 10 13 WH 19 19 25.5 32 XG 57 57 3.5 70
1)
XV 1) min.
XV 1) max.
ZJ
B3 8 8 10 12
SW1 22 22 30 41
99 98.5 + X* 155.5 99 98.5 + X* 155.5 105.5 105 + X* 162 112 111.5 + X* 168.5
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
24/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 40,5 VD
1, 22, 23
D1; 0,5 EE 17,5 MA = 80 Nm
13
12
44,5 0,2
RD
73
14
45
38
Y
M12
X
41,5
89
B3 A
16 41,5
M16 76 + X* ZJ + X*
10
B2
32 89 9
76,5 + X* ZM + 2 x X*
WH + X*
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
Y
8 0,2
13
14 0,07 24
23,5
25
89 25
13,5
65
14
14 65
184 + X*
Type of mounting P
14, 15
M12 WH VD
1, 22, 23
13
12
Y
91 ,5
X
RD WH + X* ZM + 2 x X*
45
ZJ + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 25 28 36 45 KK Thread version C. E B F M20 x 1.5 M22 x 1.5 M24 x 2 M20 x 1.5 M22 x 1.5 M24 x 2 M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M30 x 2 A Thread version C. E. B F 28 55 28 55 41 65 50 65 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
01 G1/2
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
25/72
14, 15
WH
1, 22, 23
13
12
M12
91
,5
10
ZJ + X*
45
16
KK
25 -0,010
20 -0,12 17
64
20
27
KK
M24 x 2 SW36
36
35 42
B4 B1 A
16
30 -0,010
12
Thread version F
94
22 -0,12 19
73
30
42 50
M30 x 2 SW41
45
Piston rod 25 28 36 45
RD f7 38 42 50.7 60
B4 10 10 12 12
VD 6 6 10 13
WH 19 19 25.5 32
B1 19 19 20 20
B2 20 20 14 14
B3 8 8 10 12
SW1 22 22 30 41
X* = stroke length
15
110 147
126
50
20
50
26/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 WH 46,5
1, 22, 23
D1; 0,5 EE
13
A
12
A-A
16
KK
90
114
18
B3 A
19
51
45
20 70
35
10
114
23 25 0,18
XN + X*
Type of mounting G
14, 15
WH
1, 23
26,5
13
12
A-A
114 +1,5
17
R3
A
50 33
XC + X*
39+0,5 25,43
H7 f7
77 92
Type of mounting C
Operating pressure with piston rod 36: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 45 and 56: 110 bar on cap side, 210 bar on piston rod side
14, 15
WH VD
1, 22, 23
21,5
MA = 170 Nm
13
12
18
RD
114 82,5
M16
X
114 149 180
114 +1,5
19
45
WH + X* ZM + 2 x X*
ZJ + X*
15
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 36 45 56 KK Thread version C, E B F M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M36 x 3 M39 x 2 M45 x 2 M39 x 3 A Thread version C, E, B F 41 65 51 80 57 90 EE Pipe connection 13 02 14 G1 M27 x 2 M33 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
27/72
14, 15
WH VD
1, 22, 23
RD
X
18 WH + X* ZM + 2 x X*
19
ZJ + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
19
114 82,5
ZF + X*
Type of mounting K
14, 15
WH
1, 22, 23
13
12
19
ZF + X*
Piston rod 36 45 56
RD f7 50 60 70
VD 6 10 10
WH 22 28.5 32
B3 9 12 15
SW1 30 41 46
X* = stroke length
18
18
28/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 46,5 VD
1, 22, 23
21,5
44,45 0,03
D1; 0,5 EE
KK
RD
90
114
R2
Y
45
X
9
45 114 0,3 45 XG
10
19 51 B3 XG A
WH + X* ZM + 2 x X*
ZJ + X*
13
12
Strokemin = 30 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
M16
R2
X
45 127 0,3 45
XV ZM + 2 x X* WH + X*
XV
51
ZJ + X*
15
13
12
Strokemin = 20 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
0,03
44,45
114
XJ + X* ZJ + X*
45
45
114 0,3
13
EE Pipe connection 13 02 G1 M27 x 2
Piston rod 36 45 56
KK Thread version C, E B F M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M36 x 3 M39 x 2 M45 x 2 M39 x 3
A Thread version C, E, B F 41 65 51 80 57 90
R2
45
12
D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
14
M33 x 2
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
29/72
14, 15
WH
1, 22, 23
13
10 114 9
12
114 25 1
18 36,5
105 + X* ZJ + X*
23 149 185
57,1
0,2
33
X
36,5
111 + X* ZM + 2 x X*
WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
9,5 0,2
57,1 h10
18 0,07
ZJ + X*
18 0,07
9,5 0,2
WH + X* ZM + 2 x X*
Type of mounting M
14, 15
WH
13
12
47,5
Seal ring 29 x 3 89 + X* ZJ + X*
57,1 h10
Y
25 35
X
47,5
89 + X* ZM + 2 x X*
WH + X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 36 45 56 RD f7 50 60 70 VD 6 10 10 WH 22 28.5 32 XG 66.5 73 76.5
1)
XV 1) min.
XV 1) max.
ZJ
B3 9 12 15
SW1 30 41 46
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
30/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 46,5 VD
1, 22, 23
D1; 0,5 EE 21,5
13
MA = 170 Nm
18
12
RD
90
B3 A
19 47,5
M20 89 + X* ZJ + X*
57 0,2
51
45
Y
M16
X
47,5
114
10
B2
38 114 9
89 + X* ZM + 2 x X*
WH + X*
15
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
Y
9,5 0,2
0,2-0,4 57 0,2
16,5
18 0,07 28,5
28,5
16,5
82,5
32
114 32
17,5
17,5 82,5
216 + X*
Type of mounting P
14, 15
M16 WH VD
1, 22, 23
13
12
Y
117
X
RD WH + X*
58
ZJ + X*
ZM + 2 x X*
Strokemin = 30 mm with thread version E (only for double-rod cylinder) Piston rod 36 45 56 KK Thread version C, E B F M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M36 x 3 M39 x 2 M45 x 2 M39 x 3 A Thread version C, E, B F 41 65 51 80 57 90 EE Pipe connection 13 02 G1 M27 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
14
M33 x 2
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
31/72
14, 15
WH
1, 22, 23
13
12
M16
117
ZJ + X*
13 58
16
30 -0,010
22 -0,12 19
73
20
30
42 50 82
KK
suitable for thread version F Material no.: R900001331 Weight: 0.9 kg Permissible load: 55 kN
M30 x 2 SW41
Thread version F
16
suitable for thread version F Material no.: R900012486 Weight: 1.4 kg Permissible load: 73 kN
35 -0,012
45
25 -0,12 21
KK
42
47 58 92
15
20
110
M36 x 3 SW50
16
40 -0,012
60
28 -0,12 23
44
52 65
suitable for thread version F Material no.: R900001332 Weight: 2 kg Permissible load: 90 kN
15
20
125
M39 x 3 SW55
Piston rod 36 45 56
RD f7 50 60 70
B4 12 14 16
VD 6 10 10
WH 22 28.5 32
B1 20 20 25
B2 20 15 15
B3 9 12 15
SW1 30 41 46
X* = stroke length
65
18
142
190
166
147
50
50
50
32/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 WH 49,5
1, 22, 23
D1; 0,5 EE
20
21,5
63
13
A
12
A-A
16
KK
115
127
22
B3 A
51
22,5
45
20 80
40
10
127
25 28 0,12
XN + X*
Type of mounting G
14, 15
WH
1, 23
26,5
13
12
A-A
127 +1,6
17
R4
1,
A
XC + X*
50 49 34,95
H7 f7
51,5 +0,5
102 118
Type of mounting C
Operating pressure with piston rod 45 and 50: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 70: 110 bar on cap side, 210 bar on piston rod side
14, 15
1, 22, 23
WH VD 21,5
MA = 195 Nm
13
12
18
RD
127 97
M16
X
127 162 195
127 +1,6
22
45
WH + X* ZM + 2 x X*
ZJ + X*
15
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Piston rod 45 50 70 KK Thread version C, E B F M33 x 2 M39 x 2 M42 x 3 M39 x 2 M45 x 2 M45 x 3 M48 x 2 M56 x 2 M45 x 3 A Thread version C, E, B F 51 90 57 100 76 100 EE Pipe connection 13 02 14 G1 M27 x 2 M33 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
33/72
14, 15
WH VD
1, 22, 23
RD
X
18 WH + X* ZM + 2 x X*
22
ZJ + X*
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
22
127 97
ZF + X*
Type of mounting K
14, 15
WH
1, 22, 23
13
12
22
ZF + X*
Piston rod 45 50 70
RD f7 60 66.6 90
VD 6 6 10
WH 25.5 28.5 35
B3 12 15 15
SW1 41 46 60
X* = stroke length
18
18
34/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 49,5 VD
1, 22, 23
44,45
D1; 0,5 EE
21,5
KK
0,03
115
RD
127
R2
Y
45
X
9
45 127 0,3 45 XG
22,5 B3 XG A
10
51
WH + X* ZM + 2 x X*
ZJ + X*
13
12
Strokemin = 55 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
R2
M16
X
45
XV ZJ + X*
51 15
139,5 0,3
45
XV ZM + 2 x X*
WH + X*
13
12
Strokemin = 20 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
0,03
44,45
127
45
45
127 0,3
XJ + X* ZJ + X*
13
12
D1 Pipe connection 01 13 02 14 42 47 42 47
Piston rod 45 50 70
KK Thread version C, E B F M33 x 2 M39 x 2 M42 x 3 M39 x 2 M45 x 2 M45 x 3 M48x 2 M56 x 2 M45 x 3
01 G3/4
X* = stroke length
R2
45
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
35/72
14, 15
WH
1, 22, 23
13
10 127 9
12
Y
101,5 + X* ZJ + X*
127 32 1
40
X
44,5
27 171,5 215
107,5 + X* ZM + 2 x X*
WH + X*
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
11 -0,2
22 007
ZJ + X*
63,5 h10
220 0,77
11 -0,2
WH + X* ZM + 2 x X*
Type of mounting M
14, 15
WH
13
12
47,5
63,5 h10
Y
25
X
47,5 101,5 + X* ZM + 2 x X* WH + X*
35
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Piston rod 45 50 70 Cushioning lengths piston piston side rod side 35 35
RD f7 60 66.6 90
VD 6 6 10
WH 25.5 28.5 35
XG 73 76 82.5
1)
XV 1) min.
XV 1) max.
ZJ
B3 12 15 15
SW1 41 46 60
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
36/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 49,5 VD
1, 22, 23
D1; 0,5 EE 21,5
13
MA = 195 Nm
22
12
115
RD
127
51
22,5 B3 A
63,5 0,2
45
Y
M16
X
50,5
50,5
M24 95,5 + X* ZJ + X*
10
B2
52,5 127
95,5 + X* ZM + 2 x X*
WH + X*
15
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
Y
11 0,2
16,5
22 0,07 28,5
28,5
16,5
32
127 32
97
17,5
225,5 + X*
17,5 97
Type of mounting P
14, 15
M16 WH VD
1, 22, 23
13
12
Y
137
X
RD WH + X*
58
ZJ + X*
ZM + 2 x X*
Strokemin = 55 mm with thread version E (only for double-rod cylinder) Piston rod 45 50 70 KK Thread version C, E B F M33 x 2 M39 x 2 M42 x 3 M39 x 2 M45 x 2 M45 x 3 M48 x 2 M56 x 2 M45 x 3 A Thread version C, E, B F 51 90 57 100 76 100 EE Pipe connection 13 02 14 G1 M27 x 2 M33 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
37/72
14, 15
WH
1, 22, 23
13
12
M16
137
ZJ + X*
13 58
16
KK
45 -0,012
32 -0,12 27
102
20
48
58 70
KK
M42 x 3 SW60
B4 B1 A
16
50 -0,012
65
20
112
35 -0,12 30
58
62 75
145
Thread version F
20
M45 x 3 SW65
68
Piston rod 45 50 70
RD f7 60 66.6 90
B4 16 18 18
VD 6 6 10
WH 25.5 28.5 35
B1 25 32 32
B2 25 25 15
B3 12 15 15
SW1 41 46 60
X* = stroke length
20
160
221
199
7
6
50 50
38/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 WH 49,5
1, 22, 23
D1; 0,5 EE
20
21,5
82
13
A
12
A-A
16
KK
145
165
B3 A
51
A
22,5 45 30 90
25
45
10
165
30 32 0,12
XN + X*
Type of mounting G
14, 15
WH
1, 23
26,5
13
12
A-A
165 +1,6
17
R5
A
XC + X*
50 52 44,48 H7 f7
65 +0,5
127 147
Type of mounting C
Operating pressure with piston rod 50 and 56: 160 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 63 and 90: 60 bar on cap side, 210 bar on piston rod side
14, 15
1, 22, 23
WH VD 21,5
MA = 385 Nm
13
12
23
165 125,5
RD
M20
X
165 208 250
165 +1,6
22
45
WH + X* ZM + 2 x X*
ZJ + X*
18
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Piston rod 50 56 63 90 KK Thread version C, E B F M39 x 2 M45 x 2 M45 x 3 M39 x 2 M45 x 2 M45 x 3 M48 x 2 M56 x 2 M52 x 3 M64 x 2 M76 x 2 M52 x 3 A Thread version C, E, B F 57 100 57 100 76 115 89 115 EE Pipe connection 13 02 14 G1 M27 x 2 M33 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
39/72
14, 15
WH VD
1, 22, 23
RD
X
23 WH + X* ZM + 2 x X*
22
ZJ + X*
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure with piston rod 50, 56 and 63: 210 bar on cap side, 150 bar on piston rod side Operating pressure with piston rod 90: 210 bar on cap side, 210 bar on piston rod side
14, 15
WH
1, 22, 23
13
12
ZF + X*
Type of mounting K
14, 15
WH
1, 22, 23
13
12
22
ZF + X*
Piston rod 50 56 63 90
VD 6 7 10 10
WH 28.5 28.5 35 35
B3 14 14 15 15
SW1 46 46 55 75
X* = stroke length
23
23
22
165 125,5
40/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 49,5 VD
1, 22, 23
D1; 0,5 EE
21,5
KK
RD
145
R2
Y
45
X
45
22,5 B3 XG A
10
51
165 0,3
45
XG
WH + X* ZM + 2 x X*
ZJ + X*
13
12
Strokemin = 70 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
WH
1, 22, 23
MA = 385 Nm
195 +1,8
R2
51
M20
45 18
XV ZJ + X*
177,5 03
45
XV ZM + 2 x X*
WH + X*
13
12
Strokemin = 20 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
WH
1, 22, 23
44,45
0,03
165
XJ + X* ZJ + X*
45
45
165 0,3
13
Piston rod 50 56 63 90 KK Thread version C, E B F M39 x 2 M45 x 2 M45 x 3 M39 x 2 M45 x 2 M45 x 3 M48 x 2 M56 x 2 M52 x 3 M64 x 2 M76 x 2 M52 x 3 A Thread version C, E, B F 57 100 57 100 76 115 89 115
01 G3/4
R2
45
12
D1 Pipe connection 01 13 02 14 42 47 42 47
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
41/72
14, 15
WH
1, 22, 23
13
10 165 9
12
165 +1,6
18 32 1 40 82,5 h10
Y
44,5
X
44,5
114,5 + X* ZJ + X*
27 209,5
255 +1,9
120 + X* ZM + 2 x X*
WH + X*
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
11 0,2
82,5 h10
22 0,07
ZJ + X*
22 0,07
ZM + 2 x X*
11 0,2
WH + X*
Type of mounting M
14, 15
WH
13
12
50,5
82,5 h10
Y
25 35
X
50,5
108 + X* ZM + 2 x X*
WH + X*
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Piston rod 50 56 63 90 Cushioning lengths kolben on piston seitig rod side 33 35
VD 6 7 10 10
WH 28.5 28.5 35 35
XG 76 76 82.5 82.5
1)
XV 1) min.
XV 1) max.
ZJ
B3 14 14 15 15
SW1 46 46 55 75
127.5 139 + X* 209.5 127.5 139 + X* 209.5 134 145.5 + X* 216 134 145.5 + X* 216
X* = stroke length
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
42/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
WH SW1 KK 49,5 VD
1, 22, 23
D1; 0,5 EE 21,5
13
MA = 385 Nm
25
12
RD
145
22,5 B3 A
82,5 0,2
51
45
Y
M20
X
50,5
165
50,5
M24 108 + X* ZJ + X*
10
B2
74,5 165
108 + X* ZM + 2 x X*
WH + X*
18
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
WH
1, 22, 23
13
12
Y
11 0,2
19
22 0,07 38
38
19
125,5
24
38
165 38
24 125,5
257 + X*
Type of mounting P
14, 15
M20 WH VD
1, 22, 23
13
12
Y
178
X
RD WH + X*
80
ZJ + X*
ZM + 2 x X*
Strokemin = 70 mm with thread version E (only for double-rod cylinder) Piston rod 50 56 63 90 KK Thread version C, E B F M39 x 2 M45 x 2 M45 x 3 M39 x 2 M45 x 2 M45 x 3 M48 x 2 M56 x 2 M52 x 3 M64 x 2 M76 x 2 M52 x 3 A Thread version C, E, B F 57 100 57 100 76 115 89 115 EE Pipe connection 13 02 14 G1 M27 x 2 M33 x 2 D1 Pipe connection 01 13 02 14 42 47 42 47
01 G3/4
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
43/72
14, 15
WH
1, 22, 23
13
12
M20
178
ZJ + X*
16 80
16
KK
50 -0,012
35 -0,12 30
112
20
58
62 75
135 70 88
Thread version F
KK
M45 x 3 SW65
B4 B1 A
16
60 -0,015
68
44 -0,15 38
M52 x 3 SW75
70
Piston rod 50 56 63 90
B4 18 18 20 20
VD 6 7 10 10
WH 28.5 28.5 35 35
B1 32 32 45 45
B2 40 40 25 25
B3 14 14 15 15
SW1 46 46 55 75
X* = stroke length
20
68 175 246
20
20
160
6
221
50
50
44/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 31,5 57
1, 23
D1; 0,5 EE 32
20
95
13
A
12
A-A
16
KK
170
190
35
15 A
57
25,5
57
30 120
50
14
190
10
32 35 0,12
395 + X*
Type of mounting G
14, 15
31,5
1, 23
36
13
12
A-A
190 +1,8
17
R6
A
308 + X*
61 59
65 +0,5 50,83
H7 f7
127 147
Type of mounting C
Operating pressure with piston rod 63 and 70: 130 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 80 and 100: 60 bar on cap side, 210 bar on piston rod side
14, 15
32 7
1, 23
32
MA = 660 Nm
13
12
27
190 145,5
RD
M24
X
190 239,5 285
190 +1,8
25
57
31,5 + X* 302 + 2 x X*
245 + X*
21
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Piston rod 63 70 80 100 KK Thread version C, E B F M48 x 2 M56 x 2 M52 x 3 M48 x 2 M56 x 2 M52 x 3 M58 x 2 M68 x 2 M64 x 4 M76 x 2 M95 x 2 M64 x 4 A Thread version C, E, B F 76 115 76 115 89 145 101 145 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 47 58 47 58
01 G1
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
45/72
14, 15
32 7
1, 23
RD
X
27 31,5 + X* 302 + 2 x X*
25
245 + X*
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Type of mounting D Operating pressure with piston rod 63 and 70: 210 bar on cap side, 150 bar on piston rod side Operating pressure with piston rod 80 and 100: 210 bar on cap side, 210 bar on piston rod side
14, 15
31,5
1, 23
13
12
190 145,5
270 + X*
25
Type of mounting K
14, 15
31,5
1, 23
13
12
25
270 + X*
SW1 55 60 75 85
X* = stroke length
27
27
46/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5 SW1 57 7
1, 23
32
D1; 0,5 EE
KK
170
RD
R2
Y
57
X
51
25,5 15 85,5 A
14
57
190,5 0,3
51
10
85,5
31,5 + X* 302 + 2 x X*
245 + X*
13
12
Strokemin = 85 mm with thread version E (only for double-rod cylinder)
Type of mounting E
31,5
50,8 0,03
14, 15
1, 23
210 +1,8
190
R2
M24
X
51
75
XV 245 + X*
21
216 0,3
51
XV 302 + 2 x X*
31,5 + X*
13
12
Strokemin = 20 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
31,5
1, 23
0,03
50,8
190
57
51
190,5 0,3
213,5 + X* 245 + X*
13
EE Pipe connection 13 02
KK Thread version C, E B F M48 x 2 M56 x 2 M52 x 3 M48 x 2 M56 x 2 M52 x 3 M58 x 2 M68 x 2 M64 x 4 M76 x 2 M95 x 2 M64 x 4
R2
51
12
D1 Pipe connection 01 13 02 14 47 58 47 58
01 G1
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
47/72
14, 15
31,5
1, 23
13
14 190 10
12
190 +1,8 38 1
35 95,2 h10 48
Y
54,5 130 + X* 245 + X*
X
54,5 130 + X* 302 + 2 x X* 31,5 + X*
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
31,5
1, 23
13
12
12,5 0,2
95,2 h10
25 0,07
25 0,07
302 + 2 x X*
12,5 0,2
245 + X*
31,5 + X*
Type of mounting M
14, 15
31,5
13
12
57,5
95,2 h10
Y
32 42
X
57,5
124 + X* 302 + 2 x X*
31,5 + X*
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Piston rod RD f7 63 79.3 70 90 80 95.2 100 120 X* = stroke length XV 1) min. 151.5 151.5 151.5 151.5 XV 1) max. 150.5 + X* 150.5 + X* 150.5 + X* 150.5 + X*
1)
SW1 55 60 75 85
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
48/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5
SW1
1, 23
D1; 0,5 EE 32
13
MA = 660 Nm
35
12
57 7
KK
RD
170
25,5 15 A
95 0,2
57
57
190
Y
M24
X
57,5
57,5
B2
84 190 10
14
124 + X* 302 + 2 x X*
31,5 + X*
21
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
31,5
1, 23
13
12
Y
12,5 0,2
0,2-0,4 95 0,2
190 44
22
25 0,07 43
43
22
145,5
27
44
27 145,5
298,5 + X*
Type of mounting P
14, 15
M24 31,5 7
1, 23
13
12
Y
206
X
RD 31,5 + X*
90
245 + X*
302 + 2 x X*
Strokemin = 85 mm with thread version E (only for double-rod cylinder) Piston rod 63 70 80 100 KK Thread version C, E B F M48 x 2 M56 x 2 M52 x 3 M48 x 2 M56 x 2 M52 x 3 M58 x 2 M68 x 2 M64 x 4 M76 x 2 M95 x 2 M64 x 4 A Thread version C, E, B F 76 115 76 115 89 145 101 145 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 47 58 47 58
01 G1
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
49/72
14, 15
31,5
1, 23
13
12
M24
206
19
245 + X*
90
16
KK
60 -0,015
44 -0,15 38 135
20
68
70 88
180
KK
M52 x 3 SW75
B4 B1 A
16
80 -0,015
70
55 -0,15 47
91
95 110
20
20
M64 x 4 SW100
85
B4 20 20 51 51
B1 45 45 60 60
B2 45 45 30 30
SW1 55 60 75 85
X* = stroke length
25
230
324
175
6
Thread version F
246
50
50
50/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 31,5 65
1, 23
D1; 0,5 EE 40
20
10
13
A
7, 5
12
A-A
16
KK
205
216
25,5
15 A
70
70
40 140
45
60
14
216
10
453 + X*
40 44 0,15
Type of mounting G
14, 15
31,5
1, 23
44
13
12
216 +1,8
17
A-A
R7
A
74 72
349 + X*
78 +0,5 63,53
H7 f7
154 176
Type of mounting C
Operating pressure with piston rod 80 and 90: 110 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 125: 60 bar on cap side, 210 bar on piston rod side
14, 15
31,5 7
1, 23
40
MA = 800 Nm
13
12
30
RD
25,5
70
M27
216 167
X
216 270 320
216 +1,8
31,5 + X* 330 + 2 x X*
273 + X*
24
Strokemin = 105 mm with thread version E (only for double-rod cylinder) Piston rod 80 90 125 KK Thread version C, E B F M58 x 2 M68 x 2 M64 x 4 M64 x 2 M76 x 2 M80 x 2 M90 x 2 M110 x 2 M100 x 2 A Thread version C, E, B F 89 145 89 80 127 100 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 58 65 58 65
01
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
51/72
14, 15
31,5 7
1, 23
RD
X
31,5 + X* 330 + 2 x X* 30
25,5
273 + X*
Operating pressure with piston rod 80 and 90: 210 bar on cap side, 110 bar on piston rod side Operating pressure with piston rod 125: 210 bar on cap side, 150 bar on piston rod side
14, 15
31,5
1, 23
13
12
216 167
298,5 + X*
Type of mounting K
14, 15
31,5
1, 23
13
12
25,5
298,5 + X*
SW1 75 75 115
X* = stroke length
30
30
25,5
52/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5 SW1 65 7
1, 22, 23
40
D1; 0,5 EE
KK
205
RD
R2
Y
70
X
63
25,5 15 92 A
14
70
216 0,3
63
10
92
31,5 + X* 330 + 2 x X*
273 + X*
13
12
Strokemin = 105 mm with thread version E (only for double-rod cylinder)
Type of mounting E
14, 15
31,5
1, 23
R2
M27
X
63 247,5 0,3 63 XV 330 + 2 x X* 31,5 + X*
80 XV 273 + X* 24
13
12
Strokemin = 25 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
31,5
1, 23
0,03
63,5
216
70
63
216
0,3
238 + X* 273 + X*
13
12
D1 Pipe connection 01 13 02 14 58 65 58 65
KK Thread version C, E B F M58 x 2 M68 x 2 M64 x 4 M64 x 2 M76 x 2 M80 x 2 M90 x 2 M110 x 2 M100 x 2
01
EE Pipe connection 13 02
X* = stroke length
R2
63
14
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
53/72
14, 15
31,5
1, 23
13
14 216 10
12
216 +1,8 44 1
45 40 108 h10 60
Y
60,5 146 + X* 273 + X*
X
60,5 146 + X* 330 + 2 x X* 31,5 + X*
286 355 + 2
Strokemin = 105 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
31,5
1, 23
13
12
12,5 0,2
108 h10
12,5 0,2
25 0,07 273 + X*
25 0,07
330 + 2 x X*
31,5 + X*
Type of mounting M
14, 15
31,5
13
12
65,5
42 x 3 149 + X* 273 + X*
Seal ring
108 h10
Y
38
X
65,5 136 + X* 330 + 2 x X* 31,5 + X*
48
Strokemin = 105 mm with thread version E (only for double-rod cylinder) Piston rod RD f7 80 95.2 90 108 125 146 XV 1) min. 167 167 167 XV 1) max. 163 + X* 163 + X* 163 + X* SW1 75 75 115 Cushioning lengths piston side piston rod side 50 50
X* = stroke length
1)
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
54/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5 SW1 KK 65 7
1, 23
D1; 0,5 EE 40
13
MA = 800 Nm
45
12
205
RD
216
108 0,2
70
70
Y
M27
X
65,5
25,5 15 A
65,5
B2
90 216
14
10
136 + X* 330 + 2 x X*
31,5 + X*
24
Strokemin = 105 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
31,5
1, 23
13
12
Y
12,5 0,2
24
25 0,07 46
46
24
167
30
50
216 50
30 167
333,5 + X*
Type of mounting P
14, 15
M27 31,5 7
1, 22, 23
13
12
Y
236
X
RD 31,5 + X*
105
273 + X*
330 + 2 x X*
Strokemin = 105 mm with thread version E (only for double-rod cylinder) Piston rod 80 90 125 KK Thread version C, E B F M58 x 2 M68 x 2 M64 x 4 M64 x 2 M76 x 2 M80 x 2 M90 x 2 M110 x 2 M100 x 2 A Thread version C, E, B F 89 145 89 80 127 100 EE Pipe connection 13 02 D1 Pipe connection 01 13 02 14 58 65 58 65
01
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
55/72
14, 15
31,5
1, 23
13
12
M27
236
273 + X*
22 105
16
Self-aligning clevis CGK 80
80 -0,015
55 -0,15 47
180
20
91
95 110
KK
suitable for thread version F Material no.: R900001928 Weight: 13.1 kg Permissible load: 375 kN
M64 x 4 SW100
Thread version F
80 -0,015
60 -0,4 55 -0,15
85
KK
B1 A
M80 x 2
81
B4
suitable for thread version F Material no.: R900303132 Weight: 12.2 kg Permissible load: 385 kN
80
16
95
25
20
R1
65 -0,4 60 -0,2
M100 x 2 143
101
suitable for thread version F Material no.: R900303133 Weight: 21.5 kg Permissible load: 535 kN
90 -0,020
16
90
113
20
B4 51
B1 60
B2 40 40 28
SW1 75 75 115
X* = stroke length
210
170
03
230
324
50
R8 8
6 6
56/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
SW1 31,5 68
1
D1; 0,5 EE 43
20
12
13
A
0
12
A-A
16
KK
230
241
15 A
76 25,5
76
45 165
45
70
14
241
10
45 49 0,15
508,5 + X*
Type of mounting G
14, 15
31,5
1
45
13
12
A-A
241+1,8
17
R7
9,
A
381 + X* 78 80,5 76,23
H7 f7
78+0,5
154 176
Type of mounting C
Operating pressure with piston rod 90 and 100: 70 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod 140: 40 bar on cap side, 210 bar on piston rod side
14, 15
31,5 7
1
43
MA = 1200 Nm
13
12
33
241 190,5
RD
M30
X
241 300 355
241+1,8
25,5 298,5 + X*
76 26
31,5 + X* 355,5 + 2 x X*
Strokemin = 120 mm with thread version E (only for double-rod cylinder) Piston rod 90 100 140 KK Thread version C, E B F M64 x 2 M76 x 2 M80 x 2 M76 x 2 M95 x 2 M80 x 2 M100 x 2 M130 x 2 M110 x 2 A Thread version C, E, B F 89 80 101 80 140 110 EE Pipe connection 13 02 M48 x 2 D1 Pipe connection 01 13 02 14 65 65
01 G1 1/2
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
57/72
14, 15
31,5 7
13
12
RD
X
31,5 + X* 355,5 + 2 x X* 33
25,5
298,5 + X*
Operating pressure with piston rod 90 and 100: 210 bar on cap side, 110 bar on piston rod side Operating pressure with piston rod 140: 210 bar on cap side, 150 bar on piston rod side
14, 15
31,5
13
12
324 + X*
Type of mounting K
14, 15
31,5
13
12
25,5
324 + X*
SW1 75 85 120
X* = stroke length
33
33
25,5
241 190,5
58/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5 SW1 KK 68 7
1
43 76,2 0,03 D1; 0,5 EE
241 +1,8
230
RD
R2
Y
76
X
10 76 241,5 0,3 76 95,5 355,5 + 2 x X* 31,5 + X*
25,5 15 A
95,5 298,5 + X*
14
76
13
12
Strokemin = 120 mm with thread version E (only for double-rod cylinder)
Type of mounting E
31,5
14, 15
R2
M30
X
279,5 0,3 76 XV 31,5 + X*
XV
95 298,5 + X* 26
76
13
12
355,5 + 2 x X*
Strokemin = 25 mm Always specify dimension XV in clear text on the order (observe XVmin and XVmax) Type of mounting S
Note: Dimensions for cylinder with piston rod extension LY in the retracted condition, see index 2 on page 5.
14, 15
31,5
1
76,2 0,03
260,5 + X* 298,5 + X*
76
241
76
241,5 0,3
13
Piston rod 90 100 140 KK Thread version C, E B F M64 x 2 M76 x 2 M80 x 2 M76 x 2 M95 x 2 M80 x 2 M100 x 2 M130 x 2 M110 x 2 A Thread version C, E, B F 89 80 101 80 140 110 EE Pipe connection 13 02 M48 x 2
R2
76
12
D1 Pipe connection 01 13 02 14 65 65
01 G1 1/2
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
59/72
14, 15
31,5
13
14 241 10
12
120,6 h10
241 +1,8 44 1
45 60
Y
60,5 171,5 + X* + X* 298,5 + X*
X
60,5 171,5 + X* 355,5 + 2 x X* 31,5 + X*
40 311 380 +2
Strokemin = 120 mm with thread version E (only for double-rod cylinder) Type of mounting L Operating pressure 210 bar
14, 15
31,5
13
12
120,6 h10
12,5 0,2
12,5 0,2
25 0,07 298,5 + X*
25 0,07 355,5 + 2 x X*
31,5 + X*
Type of mounting M
14, 15
31,5
13
12
120,6 h10
38 48
Y
Seal ring 42 x 3 168,5 + X* 298,5 + X*
X
68,5
68,5
155,5 + X* 355,5 + 2 x X*
31,5 + X*
Strokemin = 120 mm with thread version E (only for double-rod cylinder) Piston rod RD f7 90 108 100 120 140 158 XV 1) XV 1) min. max. 180.5 175 + X* 180.5 175 + X* 180.5 175 + X* SW1 75 85 120 Cushioning lengths piston side piston rod side 50 50
X* = stroke length
1)
Always specify dimension XV in clear text on the order (observe XVmin and XVmax)
60/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
14, 15
31,5 SW1 KK 68 7
1
D1; 0,5 EE 43
13
MA = 1200 Nm
12
120,6 0,2
230
RD
45
76
76
241
Y
M30
X
68,5
25,5 15 A
68,5
14
105 241
10
155,5 + X* 355,5 + 2 x X*
26
B2
31,5 + X*
Strokemin = 120 mm with thread version E (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar
14, 15
31,5
1
0,2-0,4 120,5 0,2
13
12
Y
50 190,5 33
12,5 0,2
29
25 0,07 51
51
29
241 50
368,5 + X*
33 190,5
Type of mounting P
14, 15
M30 31,5 7
13
12
Y
7 26
X
RD 31,5 + X*
115
298,5 + X*
355,5 + 2 x X*
Strokemin = 120 mm with thread version E (only for double-rod cylinder) Piston rod 90 100 140 KK Thread version B F M76 x 2 M80 x 2 M95 x 2 M80 x 2 M130 x 2 M110 x 2 A Thread version C, E, B F 89 80 101 80 140 110 EE Pipe connection 13 02 M48 x 2 D1 Pipe connection 01 13 02 14 65 65
01 G1 1/2
14
X* = stroke length
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
61/72
14, 15
31,5
13
12
M30
267
298,5 + X*
24
115
KK
80 -0,015
80
16
95
Thread version F
125
M80 x 2
81
20
KK
100 -0,020
105
16
125
M110 x 2 153
111
20
SW1 75 85 120 Cushioning lengths piston side piston rod side 50 50
B2 55 55 32
X* = stroke length
235
170
R1 15
62/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Weight
Piston Piston rod Weight in kg per 100 mm stroke mm mm Single-rod cylinder Double-rod cylinder Type of mounting B G Weight in kg with 0 stroke E H K, D C, F, L, M, R, S, T N, P, Q, 16 0.55 0.75 CD 4.7 4.3 5.0 4.6 4.9 4.2 4.0 40 18 0.6 0.8 25 0.8 1.2 CG 5.7 5.3 4.9 4.7 22 0.9 1.2 CD 7.5 7.2 8.2 7.7 8.4 6.9 6.4 50 25 1.0 1.3 36 1.3 2.1 CG 9.8 9.3 8.4 8.0 25 1.6 2.0 CD 11.3 10.5 11.1 10.6 11.6 10.3 9.3 28 1.7 2.2 63 36 2.0 2.6 CG 13.6 13.0 12.7 11.7 45 2.4 3.6
mm mm Single-rod cylinder Double-rod cylinder Type of mounting B G E H K, D C, F, L, M, R, S, T N, P, Q, 36 2.5 3.3 CD 21.0 19.5 21.3 20.0 21.8 18.7 17.3
80 45 3.0 4.2 56 3.6 5.5 CG 25.5 24.0 23.0 21.3 45 3.9 4.1 CD 29.5 28.6 28.3 27.3 27.7 25.6 23.8
100 50 4.2 5.8 70 5.6 8.6 CG 35.1 34.0 33.0 30.5 50 5.9 7.8 CD 54.7 48.2 49.5 48.8 52.5 45.0 42.5 56 6.3 8.2
mm mm Single-rod cylinder Double-rod cylinder Type of mounting B G E H K, D C, F, L, M, R, S, T N, P, Q, 63 7.9 10.4 CD 81.3 72.0 76.5 73.5 80.6 68.6 66.0 70 8.4 14.0
150 80 9.4 13.4 CG 91.5 88.5 83.6 81.0 100 11.5 17.7 80 11.6 15.6 CD 132.2 119.0 117.5 110.5 120.0 106.3 101.3
180 90 12.7 17.7 125 17.3 26.9 CG 142.0 135.0 131.0 126.0 90 15.2 20.2 CD 181.5 160.0 165.0 151.0 162.5 145.0 140.0
200 100 16.4 22.6 140 22.2 34.3 CG 197.0 183.0 177.0 172.0
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
63/72
40
50
1200
63
1400
80
1700
100
2000
125
2300
150
2600
180
2800
200
3000
Permissible stroke
SK = I
1 2
SK = I
1 2
Permissible stroke
I
Permissible stroke
64/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
40
50
63
80
100
125
150
180
200
Permissible stroke
SK = I
SK = I
I
Permissible stroke
I
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
65/72
75 330 455 990 545 770 1200 540 735 1275 1400 985 1585 1700 1240 1515 2000 1160 1585 1965 2300 1585 2100 2600 2600 2160 2680 2800 2680 3000 3000
210 150 210 520 250 380 960 255 350 685 1210 490 855 1480 625 800 1890 585 815 1050 2300 825 1120 1445 2590 1135 1455 2800 1455 1865 3000
40
50
1200
63
1400
80
1700
100
2000
125
2300
150
2600
180
2800
200
3000
Permissible stroke
SK = I
66/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Calculation of buckling
Buckling calculations are usually carried out according to Euler, because piston rods are in most of the cases to be considered as slender rods Buckling load K = 2 E J in N sK2 E J sK = = = = S = free buckling length in mm modulus of elasticity in N/mm2 = 2.1 105 for steel Mass moment of inertia in mm4 for circular cross-section d4 = 0.0491 d 4 64 safety (3.5)
i.e. under this load, the rod buckles! Max. operating load F = K S in N
2
Ordering code Type of mounting B, G, S C, F, H, L D, E, K, Q R M, N, P, T Up to 500 Up to 1425 Up to 665 Up to 1000 Up to 1425 501 to 625 1426 to 1785 666 to 835 1001 to 1250 1426 to 1785 25
Stop tube extension in mm for all piston 50 626 to 750 1786 to 2150 836 to 1000 1251 to 1500 1786 to 2150 75 751 to 875 2151 to 2500 1001 to 1165 1501 to 1750 2151 to 2500 100 876 to 1000 2501 to 2860 1166 to 1335 1751 to 2000 2501 to 2860 125 1001 to 1125 2861 to 3000 1336 to 1500 2001 to 2250 2861 to 3000 150 1126 to 1250 1501 to 1665 2251 to 2500 175 1251to 3000 1666 to 3000 2501 to 3000 Stroke length in mm
Installation length of cylinder with stop tube extension: Installation length according to unit dimensions + stop tube extension (The trunnion position of type of mounting E and R remains unchanged.)
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
67/72
Stroke tolerance in mm WH
0,1 A
Z A
ZF XS
WH XG XV XJ + X*
SS XG XV XJ XN Z
A
Retracted
0,2 A
0,1 A
0,05 A
Z A
Z A
WH
X*
ZF + X*
A 0,2 0,3 A
WH XS SS + X*
Always specify dimension XV in clear text on the order (observe XVmin and XVmax) X* = stroke length
68/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Inductive proximity switch (please state in clear text on the order, dimensions in mm)
Types of mounting
H H Mating connector with 5 m cable Material no. R900026512 (Mating connector is not included in the scope of supply, but must be ordered separately) Piston 40 Piston rod 16 18 25 22 25 36 25 28 36 45 36 45 56 H 42.5 42.5 48 44.5 53 57 60 X4 172 X5 127 Mating connector, angled with 5 m cable (Position of cable outlet cannot be defined) Material no. R900021404 (Mating connector is not included in the scope of supply, but must be ordered separately) Piston 100 Piston rod 45 50 70 50 56 63 90 63 70 80 100 80 90 125 90 100 140 H 63.5 67.5 82.5 X4 195 X5 150 50 175 130 125 205 X5 160 63 180 135 150 85 230 185 80 185 140 180 108 235 190 Notes: Installation position: 180 opposite to the line connections Pipe connection: For enlarged line connections, please consult us Type of mounting: With mounting types F, L, M, N and T, the installation 180 opposite to the line connection is impossible For mounting types and unit dimensions, see pages 8 to 61 200 120.5 245 200 X4
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
69/72
Proximity switch
Inductive proximity switches are used for reliably checking the end positions of hydraulic cylinders. They are an important component for reliably and precisely monitoring safety equipment, locking mechanisms and/or other machine functions in their end position by issuing corresponding signals. The proximity switch, which is high pressure-tight up to 500 bar, operates contact-free and floating. For this reason, it is wear-free. For safety reasons, the proximity switch is protected against being screwed in too deeply. The switching distance can therefore not be adjusted. Cylinder variants with proximity switch (option 1 E) are fitted with proximity switches on both sides.
Technical data (for applications outside these parameters, please consult us!)
Operating principle Permissible pressure Operating voltage Including residual ripple content Voltage drop Rated operating voltage Rated operating current No-load current Residual current Repeatability Hysteresis Ambient temperature range Thermal drift Switching frequency Type of protection to DIN EN 60529 Housing material Pinout 1 4 3
1) 2) 3)
PNP normally open bar V DC % V V DC mA mA A % % C % Hz Active area Proximity switch 500 10 to 30 15 1.5 24 200 8 10 5 15 25 to +80 10 1000 IP 68 IP 67 Material no. 1.4104 + 2 1 3 4
1) 2) 3)
70/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
Variant for piston rod 50, 63 and 80 mm Piston seal Version "T" Slide ring for low-friction operation Version "A" Lip seal rings for leak-free operation under steady-state conditions
10
11
RE 17017/08.08
CD 210 / CG 210
Hydraulics
Bosch Rexroth AG
71/72
AD
If this calculation results in too high a value, the cushioning length must be extended or the system pressure reduced.
Retraction movement FB = m a + AR p
v = stroke velocity in m/s s = cushioning length in m AR = annulus area in cm2 1 bar ~ 10 N/cm2 AK = piston area in cm2
72/72
Bosch Rexroth AG
Hydraulics
CD 210 / CG 210
RE 17017/08.08
3 36 35
11
20
21
33
34
37
35
35
10
19
Detail X Throttle valve for piston 40 and 50 Check valve and bleed point for piston 40 and 50
When ordering individual parts, please indicate the designation and item no. from the spare parts drawing with complete type code of the hydraulic cylinder For seal kits, please indicate the complete type code of the hydraulic cylinder.
This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent. The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.
Bosch Rexroth AG Hydraulics Zum Eisengieer 1 97816 Lohr am Main, Germany Phone +49 (0) 93 52 / 18-0 Fax +49 (0) 93 52 / 18-23 58 documentation@boschrexroth.de www.boschrexroth.de
Bosch Rexroth Teknik AB Varuvgen 7, lvsj S-125 81 Stockholm Phone +46 (08) 72 79 20 0 Fax +46 (08) 86 87 21 cyl.hyd@boschrexroth.se www.boschrexroth.se
Bosch Rexroth SA BP 37 - Z.I. Les Fourmis F-74131 Bonneville Cedex Phone +33 (0) 4 50 25 35 45 Fax +33 (0) 4 50 25 35 19 www.boschrexroth.fr