Escolar Documentos
Profissional Documentos
Cultura Documentos
Function Hand
Crown
Second Hand
Mode Hand
IMPORTANT NOTE: If you suspect a malfunction and the watch is fully charged, first check the 0-position of the hands as outlined in the 0-POSITIONING CHECK PROCEDURE. If the hands and date do not move to their respective 0-positions, it will be necessary to set them for proper operation. After a full recharge from complete power loss or if abnormal operation is noted, an ALL RESET and 0-POSITIONING CORRECTION will be needed. The second hand on this watch moves in one-second increments to indicate that the charge level is sufficient for normal time keeping operation. If it is not moving in onesecond increments, be sure to charge your watch fully as outlined in your Instruction Manual. 0-POSITIONING CHECK PROCEDURE qPull the crown out one click.
hand will move slightly indicating the hour, minute and 24-hour hand setting is active.
qPress and release the upper right button (B). The function
hour and minute hands to 12:00 while ensuring the function hand (upper right sub dial) is at 24 (note: the 24-hour hand moves in conjunction with the hour hand and cannot be set independently.)
hand (upper right sub dial) will move to the middle of the day of week scale indicating the date (4:00 position) is active for setting. Rotate the crown clockwise or counterclockwise to set the current date. (NOTE: rotating the crown rapidly activates the rapid advance feature. The hand(s) will move continuously until the crown is again rotated.)
qPress and release the upper right button (B). The function
qPress and release the upper right button (B). The function
hand (upper right sub dial) will move slightly indicating the setting for this hand is now active. Turn the crown clockwise or counterclockwise so that function hand (upper right sub dial) points to SUN and the date is set at 1. (NOTE: rotating the crown rapidly activates the rapid advance feature. The hand(s) will move continuously until the crown is again rotated.)
hand (upper right sub dial) will move to indicate the day of the week stored in memory. Rotate the crown clockwise or counterclockwise one click at a time to set the current day of the week.
qPress and release the upper right button (B). The second
qTurn the crown so that either tip of the mode hand (6:00
sub dial) is pointing to the local (travel) time (L-TM) mode. the case.
hand will move slightly indicating this hand is active. Rotate the crown clockwise to move the second hand to the 12:00 position.
qPush the crown in one click to the closed position next to qPress and hold the upper right button (B) for 10 or more
seconds until the hands move to the 0-position stored in memory. Release the upper right button (B). The correct 0position for each hand is as follows: Hour, Minute and Second hand pointing to 12:00 24 Hour hand pointing to 24 Function hand pointing to SUN Date indicating 1 it will be necessary to perform the all reset and 0-positioning correction procedure.
qPull the crown out one click. Rotate the crown so that either to the case. This completes the all reset and 0-positioning correction. You must now continue setting the time and calendar. tip of the mode hand is pointing to the alarm (ALM) mode. The hour, minute and 24-hour hands will move to the last alarm time set in memory. TO SET THE TIME qPull the crown out one click. Rotate the crown so that either
tip of the mode hand (6:00 sub dial) is pointing to the time (TME) mode.
setting position. The alarm will automatically be activated and the function hand (upper right sub dial) will move to indicate ON.
qRotate the crown clockwise or counterclockwise to set the If any of the hands do not indicate their respective 0-position,
qTurn the crown so that either tip of the mode hand (6:00
sub dial) is pointing to the local (travel) time (L-TM) mode. the case.
desired alarm time. Be sure to pay particular attention to the 24-hour hand to ensure the proper AM or PM alarm time is set. current time with the hour, minute and 24-hour hands. Be sure to set the correct AM/PM time by referring to the position of the qPress and release the lower right button (A) to either activate 24-hour hand. (NOTE: rotating the crown rapidly activates the rapid advance feature. The hand(s) will move continuously until (ON) or deactivate (OFF) the alarm. the crown is again rotated.) qPush the crown in two clicks to the closed position next to qPush the crown in two clicks to the closed position next to the the case. This completes setting the alarm. case. This completes setting the time. TO SET THE LOCAL OR TRAVEL TIME The local or travel time (L-TM) function allows a second time to TO SET THE CALENDAR qPull the crown out one click. Rotate the crown so that either be set and displayed. This can be set in 1-hour increments only. tip of the mode hand is pointing to the calendar (CAL) mode.
qPull the crown out one click. qRotate the crown so that either tip of the mode hand is
pointing to the local (travel) time (L-TM) mode. time setting position.
qPush the crown in one click to the closed position next to qWhen the hands have stopped moving, pull the crown out
two clicks.
qPull the crown out an additional click to the local (travel) qTurn the crown clockwise to advance the time by one hour,
or counterclockwise to move the time back one hour.
qPress and hold the lower right (A) and upper right (B)
buttons simultaneously for three seconds, then release. Following a confirmation tone, each of the hands move slightly in the order of the function (6:00 sub dial), minute and second hands to indicate that the all reset was successful.
qRotate the crown clockwise or counterclockwise one click at qPush the crown in two clicks to the closed position next to
the case. This completes setting the local (travel) time.
qPress and release the upper right button (B). The minute
qPress and release the upper right button (B). The second hand For additional features and more in-depth instructions,
will move to indicate the month stored in memory. Rotate the crown clockwise one click at a time to set the current month.
please refer to the full instruction manual or our web site at www.citizenwatch.com.