Escolar Documentos
Profissional Documentos
Cultura Documentos
tm
High Membrane Flux Durable Porous Plastic Substrate High Pressure Resistance Abrasion Resistance High Temperature Capability High Solids Handling Capability Fine Particle Retention Multiple Pore Sizes Available Long Service Life
Performance Attributes
High Flux Long Service Life Backwashable Multiple Pore Sizes PVDF or PE Substrate Available Proven Tubular Module Configuration Excellent Chemical and Thermal Resistance Minimal Construction Materials
Material Technology
Each POREX Tubular Membrane Filter Module contains multiple tubular membranes. These structural membrane tubes are made from a PE or PVDF sintered porous substrate that creates an intricate network of open-celled, omni-directional pores. These substrate pores are then filled with membrane which gives our tubes a unique combination of filtering capability and structural strength. The microphotograph illustrates the uniform structure of the substrate tube.
Chemical Resistance
POREX Porous Plastics are made from commercially-available thermoplastics that are resistant to a broad spectrum of corrosive chemicals and reagents. The customer should perform appropriate tests to determine the performance of POREX Porous Plastics under each specific operating condition. POREX Tubular Membrane Filter Modules are designed to retrofit existing tubular membrane systems and replace the existing modules. In operation, a fluid, such as chemically pre-treated wastewater, flows through the tubular modules at high velocity, sufficient to maintain turbulent flow. At typical operating pressures of 2080 psi, clean fluid is forced through the pores of the membrane, while suspended particulates remain in the retentate stream The turbulent flow of the retentate stream prevents the build-up of particles on the inner surface of the tube, providing high flux and prolonged filter life. This turbulent crossflow performance and large bore tubular design may eliminate the need for prefiltration and should routinely handle high solids levels up to 5% by weight.
Higher pressure resistance Increased flux Reduced system size Improved backpulse efficiency
Module Type MS is only available in FIN and COR pore size configurations using Polymer Type E Module Type MM is only available in S01, S05 and 005 pore size configurations 37 Tube Module is only available with 0.50 inch Tube ID
MM Module/Porous Membrane
Typical Applications
Heavy metal removal in metal finishing fluids Pre-reverse osmosis filters for water treatment High solids removal in electroplating solution baths High solids removal from completion fluids Food and beverage processing Cutting fluids recycling in silica grinding and slicing Heavy metal removal from incinerator scrubber water Cooling tower blow-down recycling and/or side stream filtration Brine recycling in water treatment systems Wastewater processing from the chemical, micro-electronics and pulp and paper industries
Support Worldwide
Porex Corporation, as a global leader in supplying porous plastic components, is committed to quality, innovation, and customer satisfaction. Porex owns and operates manufacturing facilities in Europe, Asia and North America providing both standard and custom components to our customers through a global network of sales engineers, agents and distributors. Porex has attained ISO 9001 Certification at the USA, Germany and Malaysia operations. With an experienced engineering support staff and global distribution capabilities, Porex brings innovative solutions to the filtration marketplace.
Intellectual Property
Porex maintains a portfolio of intellectual property falling into patented, patent-pending, and trade secret categories.
Technology Leader
Porex is all about innovation! For over 40 years, Porex has been a leader in the development and manufacture of porous plastic technologies. High-volume production and state-of-the-art tooling coupled with an advanced polymer laboratory and extensive material science expertise ensure timely, optimal solutions for a variety of applications in the healthcare, consumer and industrial markets. Continuous product innovation, vast technological resources, commitment to quality and dedication to customers are what distinguish Porex in the marketplace.
Notes
Not all Part Numbers are available at the time of product launch. Please consult factory for specific product availability.
Flux (LMH)
Flux (GFD)
Time (Hours)
Material Specifications
Substrate Tube Membrane Nominal Membrane Pore Size (m) Nominal Sinter Tube Pore Size (m) Maximum Differential Pressure (PSI) Housing Materials Housing Connections (10 x 1 inch tube), (13 x 1 inch tube), (37 x 1/2 inch tube) Polyvinylidene Fluoride, Polyethylene Polyvinylidene Fluoride 0.5, 0.1, 0.05 (MM type) 20, 100 (MS type) 60 (414 kPa) (1 inch tubes), 120 (827 kPa) (1/2 inch tubes) PVC, CPVC Length 72 inches (1829 mm) Diameter 6 inches (153 mm) End Connections 6 inch OD Victaulic groove Permeate Ports 3 inch OD Victaulic groove Sample Port inch NPT plug Length 72 inches (1829 mm) Diameter 4 inches (102 mm) End Connections 4 inch OD Victaulic groove Permeate Ports 1.5 inch OD Victaulic groove Sample Port inch NPT plug Length 72 inches (1829 mm) Diameter 8 inches (204 mm) End Connections 8 inch OD Victaulic groove Permeate Ports 3 inch OD Victaulic groove Sample Port inch NPT plug
Housing Connections (4 x 1 inch tube), (5 x 1 inch tube), (15 x 1/2 inch tube)
F I LT R AT I O N
Porex Filtration
500 Bohannon Road Fairburn, GA 30213 USA T 770.515.7700 US Toll Free 866.515.7783 F 770.515.7799 E info@porexfiltration.com
Your Local POREX Distributor is: www.porexfiltration.com 2011 Porex Corporation. Porex is a registered trademark and Tubular Membrane Module is a trademark of Porex Corporation. All Rights Reserved. PFD-032-031507-02