Escolar Documentos
Profissional Documentos
Cultura Documentos
CNC Lathes
In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Elsewhere, call: 607-734-2281 Fax: 607-734-8819
Corporate Headquarters and Manufacturing Facilities
Hardinge Inc.
Brochure 1297-A
Part No. C A -0009500-1297 September, 1996
Table of Contents
24 23 17 1 20
HARDINGE
ELMIRA, N.Y., USA
9
HARDINGE
ELMIRA, N.Y., USA
EL
INGE A RD US HA NY 21 CLMIRA
18 19 16
GRE VER ASE IFY DAI ROT LY ATIO N
2 25 17
17
HAR
DI
CL-55
CL-54
HA
ELM
RD
IRA
ING
CL-5 ., 2 USA
, N.Y
EL
NG
E
INGE A RD US HA NY 30 CLMIRA
9 6
HAR
DI
NG
E
SIZE
1 2
8A
EL
H AR
DI
NG
13
INGE A RD US HA NY 34 CLMIRA
E
SIZE
11
12
10 11
EL INGE RD US HA NY PS CLMIRA A
15 22 14
NOTE: Not all tooling is illustrated. See below for complete list. A metric top plate is required for metric tools and tool holders.
HARDINGE ELMIRA, NY C100
US PATENT # 5046226
10- and 12-Station Vertical Turret Tooling 1 2 3 4 Round Shank Tool Holder (1-1/2" ID) Round Shank Tool Holder (40 mm ID) Round Shank Boring Tool Holder (1-1/2" ID) Round Shank Boring Tool Holder (40 mm ID) Round Shank Double Tool Holder (1" ID) Round Shank Double Tool Holder (25 mm ID) Inch Blank Tool Holder (bore to size) Metric Blank Tool Holder (bore to size) Coolant Direction Balls and Tubes Round Shank Tool Setting Gauge (Main Spindle) Precision Solid Bushings (1-1/2" or 40mm OD) Precision Solid Preset Bushings (1-1/2" or 40mm OD) Precision Bushings (1" OD) Precision Bushings (3/4" OD) Double-Angle Collet Holder, 180-Series (1-1/4" OD/32 mm OD) Double-Angle Collet Holder, 180-Series (1-1/8" OD) CL-21 CL-20M CL-30 CL-30M CL-34 CL-34M CL-PS CL-PM HDC-12/12M HDZ-12/12M HDB-8 HDB-6 SG-180/180M SB-180 7 7 8 8 9 9 10 10 11 11 12 13 See Brochure 1287 See Brochure 1287 14 14 85 85 82
5 6 7 8 8A
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
All specifications are subject to change without notice. Unless indicated otherwise, all marks indicated by and are trademarks of Hardinge Inc.
EL
A E ING US RD NY HA RA CL-32 MI
DB
-9
DC
-12
SIZE
7 8
9
26
HA
ELM IRA
RD
ING
12
CL-5 ., 2 USA
, N.Y
DB
-9
Table of Contents
DIAGRAM KEY NO. MASTER LISTING DESCRIPTION MODEL NO. PAGE NO.
9 10 11 12 13 14 15 16 17 18 19 20 21 22
180-Series Double-Angle Toolholder Collets Double-Angle Collet Tool Holder (1/2", 5/8", 3/4", and 1" OD) Double-Angle Collets, 100-, 200- and 300-Series 90 Square Shank Tool Holder (1") 90 Square Shank Tool Holder (25 mm) Square-Shank Extension Tool Holder (3/4") Square-Shank Extension Tool Holder (20 mm) Square-Shank Extension Tool Holder (1") Square-Shank Extension Tool Holder (25 mm) Cut-Off Tool Separator (1") Releasing TT Tap Holder (Collet-Type 3/4" Shank) TT Tap Collets Bar Stock Puller Adapter (1-1/8" Shank) Interchangeable Bar Stock Pullers Round Shank Bar Puller (1-1/4" OD) Round Shank Bar Puller (30 mm OD) Combination Round/Square Shank Bar Puller (1") Revolving Stock Stop Tooling Packages Kennametal KM-40 Quick-Change Tooling Packages Live Tooling Attachments
DAH CL-32 CL-32M CL-TE CL-TEM CL-SE CL-SEM TT-3/4 TT (Size) F125 FM30 C125 T20-3/4-16
See Brochure 1287 23 See Brochure 1287 15 15 16 16 17 17 See Brochure 1289 24 See Brochure 1287 See Brochure 1288 See Brochure 1288 See Brochure 1288 See Brochure 1288 See Brochure 1288 26
82 25 82 75 86 201 202 46
KM-40
23 24 25 26
End-Working Attachment (Inch) End-Working Attachment (Metric) End-Tapping Attachment (Inch) End-Tapping Attachment (Metric) Cross-Tapping Attachment (Inch) Cross-Tapping Attachment (Metric) Cross-Working Attachment (Inch) Cross-Working Attachment (Metric) Square Corner Mill and Woodruff Key Slot (Inch) Square Corner Mill and Woodruff Key Slot (Metric)
CL-54 CL-55M CL-56 CL-57M CL-52 CL-53M CL-50 CL-51M CL-58E CL-58M
18 18 18 18 18 18 18 18 19 19
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Table of Contents
16 2* 7 1
INGE A RD US HA NY 46 SGMIRA EL
6 8 9
3 16
10 12
11
3
2
10
11 1
NOTE: Not all tooling is illustrated. See below for complete list. A metric top plate is required for metric tools and tool holders.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
3/4" Square Shank Insert Cutting Tools 3/4" Square Shank 35 and 55 Insert Profiling Tools Double Round Shank Tool Holder (1" ID) Double Round Shank Tool Holder (25 mm ID) Round Shank Tool Holder (1" ID) Round Shank Tool Holder (25 mm ID) Tool Holder Extension (1") Tool Holder Extension (25 mm) Cutoff Tool Separator 1C Collet-Type Tool Holder (3/4" Shank) 1C Collets Floating Reamer Holder (3/4" Shank) Precision Bushings (1/2" OD) Adjustable Holder (3/4" Shank) Releasing TT Tap Holder (Collet-Type 3/4" Shank) TT Tap Collets Crush-Type Knurling Tool Double-Angle Collet Tool Holder, 100-Series (1" Shank) Double-Angle Collets Round Shank Tool Setting Gauge (Sub-Spindle) Precision Bushings (1" OD)
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
4 5 6
7
8
13
15 14 5
* Also used to hold round shank tools for machining workpieces in the main spindle Used at even-numbered stations only
MODEL NO.
PAGE NO.
Sub-Spindle Turret Tooling CL-46 CL-47M CL-38 CL-39M CL-CE CL-CM T-17-3/4 T-19-3/4 HDB-2 00D-3/4 TT-3/4 TT (Size) T-8 DAH-135 SG-4 HDB-8 See Brochure 1289 See Brochure 1289 21 21 20 20 22 22 See Brochure 1289 24 See Brochure 1287 26 See Brochure 1287 27 24 See Brochure 1287 25 23 See Brochure 1287 19 See Brochure 1287 99 - 102 103 22 83 44 84 50 75 86 115 25 82 85
Hardinge Inc.
Elmira, New York 14902-1507 USA
Table of Contents
3 5 6 7
2
3
1
HAR
DI
NG
E
SIZE
9 10
SIZE
H AR
DI
NG
12
11
13 13A 2
H AR
DIN
G E
SIZE
14 15
16 DIAGRAM KEY NO. MASTER LISTING DESCRIPTION MODEL NO. PAGE NO. 1250 CATALOG PAGE NO.
End-Working Turret Tooling 1 2 3 4 5 6 7 8 9 10 11 12 13 13A 14 15 16 Precision Solid Bushings (1-1/2" or 40 mm OD) Precision Preset Solid Bushings (1-1/2" or 40 mm OD) #4 MT Precision Solid Bushing (1-1/2" OD) #4 MT Precision Solid Bushing (40 mm OD) Round Shank Bar Stock Puller (1-1/4" OD) Round Shank Bar Puller (30 mm OD) Bar Stock Puller Adapter Interchangeable Bar Stock Pullers Revolving Stock Stop Releasing TT Tap Holder (Collet-Type) TT Tap Collets Crush-Type Knurling Tool Precision Bushings (3/4", 1", 1-1/8" and 1-1/4" OD) Double-Angle Collet Tool Holder, 100-, 200- and 300-Series Double-Angle Collets, 100-, 200- and 300-Series Double-Angle Collet Holder, 180-Series (1-1/4" OD/32 mm OD) Double-Angle Collet Holder, 180-Series (1-1/8" OD) 180-Series Double-Angle Collets #4 MT Pressure Indicating Live Center #4 MT Extended-Nose Pressure-Indicating Center HDC-12/12M HDZ-12/12M HDC-12 HDC-12M F125 FM30 T20-3/4-16 TTTT (Size) T-8 HDB-6/8/9/10 DAH SG-180/180M SB-180 12 13 12 12 See Brochure 1288 See Brochure 1288 See Brochure 1288 See Brochure 1288 26 24 See Brochure 1287 25 See Brochure 1287 23 See Brochure 1287 14 14 See Brochure 1287 201 202 46 75 86 115 85 25 82 82 82
Hardinge Inc.
Elmira, New York 14902-1507 USA
4
H
DC
-12
DC
-12
H
DB
-9
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Table of Contents
MASTER LISTING DESCRIPTION MODEL NO. PAGE NO. 1250 CATALOG PAGE NO.
Centers 16C Headstock Center (Sub-Spindle) #4 MT Live Center (Tailstock) Optional Equipment and Accessories Full-Function Sub-Spindle* 16C Headstock Center 6-Station End-Working Turret* Live Tooling Live Tooling Attachments 2-1/2" Big-Bore Spindle* C-Axis Contouring Main Spindle Drive Systems 20-hp Hi-Torque Option 30 to 3,429 rpm (CONQUEST T51 only) Tool Touch Probe Chip Removal Systems End Discharge System Rear Discharge System** Parts Removal Systems* Tailstock Equipped Machines Sub-Spindle and End-Working Equipped Machines Steady Rest Air Blast System Hi-Pressure Coolant System Thru-Spindle Coolant System Mist Collector Auto Door Collet Closer Foot Switch Tailstock Foot Switch Voltage Transformers Tramp Oil Recovery System Hardinge T.E.A.C.H. Training Programs Audio Programming Video Hands-On Combination Package Audio & Video Har-Matic Hydrodynamic Retractable Bar Feed Systems (6-Foot and 12-Foot) SPEGO Bar Feed Systems LNS Bar Feed Systems IEMCA Bar Feed Systems Autoload Automated Parts Handling System Bolts, Nuts, Screws, Washers and Miscellaneous Items * Available on CONQUEST T51/T51SP lathes only. ** Available on CONQUEST T51 lathes only. AK-7 31 28 31 32 18, 19 32 33 33 34 34 34 35 35 35 36 36 37 37 38 38 38 38 39 39 39 39 See Brochure 1288 See Brochure T-234 See Brochure T-245 See Brochure T-246 See Brochure 1286 30 198 - 199 72 AK-7 D-4a 28 29
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Dimensions E F H 1.500 4.130 1.500 38.10 104.90 38.10 E F H 1.500 4.130 1.575 38.10 104.90 40.00
Z2
Dimensions for the following part numbers can be found on page 30.
Z2 MS 0574018
Y MS 0104021
F X
Y A
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
CL-30M CL 0011944 F
C
Dimensions E F H 2.813 4.130 1.500 71.44 104.90 38.10 E F H 2.813 4.130 1.575 71.44 104.90 40.00
Dimensions for the following part number can be found on page 30.
Z1 MS 0574018
F X
Z2 MS 0574018
Y MS 0104021
Z1
Y A E
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
A CL-34 CL 0011944 G Inch 4.310 MM 109.47 A Inch 4.310 CL-34M CL 0011944 H MM 109.47 Z1 MS 0574018
Z2
Dimensions for the following part numbers can be found on page 30.
Z2 MS 0574017
Y MS 0104021
F X Z
1
Y N A
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
CL-PM CL 0011944 D
Dimensions for the following part number can be found on page 30.
Y MS 0104021
F X
Y A
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Round Shank Tool Setting Gauge (Main Spindle) This gauge is used to set round shank tooling on center with the main spindle centerline.
One gauge is included with each CONQUEST T51, T51SP and T65-L lathe.
+X
Spindle Centerline
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
OD 1.25" 1.25" 32 mm 32 mm 32 mm 32 mm
ID Sizes Available 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" #3 MT 10, 12, 16, 20 and 25 mm 3/8", 1/2", 5/8", 3/4" and 1" #2 MT #3 MT
HDC-12 Dimensions B D K L Inch 3.375 1.500 .375 1.750 MM 85.72 40.00 9.52 46.00
Inch MM
HDC-10 Dimensions B D K L 3.125 1.250 .250 1.500 79.38 32.00 6.35 38.01
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
OD 1.50" 40 mm 1.25" 32 mm
ID Sizes Available 3/8", 1/2", 5/8", 3/4", 7/8", 1", and 1-1/4" 10, 12, 16, 20, 25, and 32 mm 3/8", 1/2", 5/8", 3/4", 7/8" and 1" 10, 12, 16, 20 and 25 mm
Dimensions HDZ-12 Inch MM B D K L 3.380 1.500 .680 1.750 85.85 40.00 17.27 45.97
Dimensions HDZ-10 B D K L Inch 3.000 1.250 .560 1.500 MM 76.20 32.00 14.22 38.10
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Model No.
Part No.
L D
G B C A
Dimensions A B C D G L 1.060 2.500 3.560 1.125 .830 1.750 27.00 63.50 90.50 31.75 21.08 44.45
L D
G B C A
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Inch MM Inch MM
CL-32M CL 0011944 K
(CL 0011944MC)
Dimensions for the following part number can be found on page 30.
Z MS 0104023
L C B E N
M A
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Model Part Dimensions No. No. C E F L M N R CL-TE CL 0011150 A Inch 3.968 .750 4.375 2.875 .780 1.500 1.875 (SB 0011944 A) MM 100.79 19.05 111.13 73.02 19.81 38.10 47.62 C E F L M N R CL-TEM CL 0011150MA Inch 3.968 .7874 4.375 2.875 .780 1.575 1.875 (CS 0011944CM) MM 100.79 20.00 111.13 73.02 19.81 40.00 47.62
Dimensions for the following part numbers can be found on page 30.
Z1 MS 0104020
Z2 MS 0104027
L Z Z
1 2
E M C R
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Model Part No. No. CL-SE CL 0011151 A Inch (SB 0011944 A) MM CL-SEM CL 0011151MA Inch (SB 0011944CM) MM
Dimensions
A B C E L M N S X
Dimensions for the following part numbers can be found on page 30. Z Z1 MS 0104020 MS 0103820
C L
Z1 A
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Model No. CL-50 CL-51M CL-52 CL-53M CL-54 CL-55M CL-56 CL-57M CL CL CL CL CL CL CL
Description
Cross-Working Attachment Inch Cross-Working Attachment Metric Cross-Tapping Attachment Inch Cross-Tapping Attachment Metric End-Working Attachment Inch End-Working Attachment Metric End-Tapping Attachment Inch End-Tapping Attachment Metric
CL 0000144ET M
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Round Shank Tool Setting Gauge (Sub-Spindle) The SG-4 tool setting gauge is used to set round shank tooling on center with the
centerline of the optional Sub-Spindle. The gauge is used by mounting the round plug portion (lower illustration) into a CL-38 or CL-39M tool holder positioned on the turret. The centering portion (upper illustration) of the gauge can be positioned by the operator to match the tools position and then locked into place with a thumb screw to center the tool. Model No. SG-4 Part No. SG 000232104 Inch MM Dimensions B C .620 1.000 15.75 25.40
A
A 5.062 128.57
D .750 19.05
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Dimensions for the following part numbers can be found on page 30.
Z1 MS 0573817
X Z1 H
A Y E
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
CL-47M CL 001194427
Dimensions C E F 3.543 3.250 4.130 89.99 82.56 104.90 C E F 3.543 3.250 4.130 89.99 82.56 104.90
Dimensions for the following part numbers can be found on page 30.
Y MS 0104021
Z1 MS 0574018
C
F X Z
1
Y E A
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
CL-CM
CL 0011150CM
(CL 0011944TC)
Dimensions B C 1.750 4.500 44.45 114.30 L M 3.490 1.000 88.65 25.40 B C 1.750 4.410 44.45 112.01 L M 3.490 1.000 88.65 25.40
Dimensions for the following part number can be found on page 30.
Z1 MS 0104020
Z1 B D C A N M E
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Miscellaneous Tooling
Chuck Stop
Qualifying Collar
S L A C
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Miscellaneous Tooling
Dimensions C 1.82 20.8 1.82 20.8 D .6243 15.856 .7493 19.031 G .30 7.6 .30 7.6 M .25 6.4 .25 6.4 N .54 13.7 .54 13.7
C M
D G
TT-5/8 TT-3/4
Dimensions B C D 1.25 3.47 .6243 31.8 88.1 15.856 1.25 3.47 .7493 31.8 88.1 19.031
A C
Hardinge Inc.
Elmira, New York 14902-1507 USA
Miscellaneous Tooling
Model No.
Part No.
0 30
G H K .39 .5002 .50 9.9 12.704 12.7 .45 .6252 .80 11.3 15.879 20.3 Z 0010901
Z Y Z1
Dimensions for the following part numbers can be found on page 30.
Y 0100208
Z1 0550506
X F
45
Hardinge Inc.
Elmira, New York 14902-1507 USA
30 H D G K A C B
Call 800-843-8801
Miscellaneous Tooling
T19-5/8 ST 0007967
Dimensions for the following part number can be found on page 30.
Z1 0550704
Z1
K A C B
B 1.38 34.9
L 1.44 36.5
A C
Hardinge Inc.
Elmira, New York 14902-1507 USA
Miscellaneous Tooling
A .84 21 .84 21
B 1.34 34 1.34 34
Dimensions for the following part numbers can be found on page 30.
Y 0100508
W Y
Z1 0100506
Z1
K B C A L
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Miscellaneous Tooling
( thread )
d D a E F
Part No. AK 000029616 C Inch MM A 1.246 31.65 C 4.344 110.34 D 2.248 57.10
Dimensions E 1.880 47.75 F 1.865 47.37 G 1.75 M/M RH* 1.75 M/M RH* *14.51 Pitch d .570 14.48
a
60 60
Hardinge Inc.
Elmira, New York 14902-1507 USA
Miscellaneous Tooling
Workpiece
a
60 60
2.36 60
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Miscellaneous Tooling
Part Number
AD 00046101 AD 0000461 R AM 0000461 AT 0000461 FCA0000461 F FCA0000461 R 370000465 DS 0000465 AD 0000466 FB 0000466 LH 0000466 ST 0000466 60000523 60000525 50002011 AH 0007241 HP 0007241 ST 0000374 7 0001502 B 47 0001502 47 0001502 C 5PA0001957 5 0002012 5 0002012 49B0000348 CH 000363 LH 000108301 ST 000422001 CS 0008710 LH 0008710 SB 0008710 60009095 KH 0010031 HLA0010039 HL 0010504 DS 0010591 2001091 ST 001116204 AH 001164401 0100208 0100506 0100508 0100510 0100514 0100516 0100520 0100540 0100648 0100814 0100816 0100840 1011912 MS 0103618 MS 0103619 MS 0103620 MS 0103624 370000622 AD 0001067 50002068 U 0004143
Bolts:
Dimensions
7/8 RD X 3-5/16 7/8 RD X 3-11/16 7/8 RD X 4-7/16 1-1/8 SQ x 4-1/8 7/8 RD x 2-7/8 7/8 RD x 3 2/4 SQ x 57/64 15/16 RD x 1 1/2 RD x 1-11/16 1/2RD x 2-7/16 1/2 RD x 3-1/16 1/2RD x 2-1/8 1/2 x 3 3/4 RD x 1-1/4 3/4 SQ x 1-7/8 1 RD x 2-9/32 7/8 RD x 2-3/16 3/4 SQ x 13/32 3/8-16 Std Hex 3/8-16 Grade 5 3/8-16 Grade 5 11/16 Hex x 1/2 7/16-14 Grade 5 7/16-14 5/8 RD x 2-1/2 3/8-16 x 1-1/2 5/16-24 x 3/4 1/4-28 x 1 3/4 RD x 1-5/8 1 RD x 1-1/8 3/4 RD x 1-5/8 3/4 RD x 1 1/4-28 x 3/8 1 RD x 1-3/4 3/4 RD x 7/16 1/2 RD x 1-11/16 1/2 RD #8260 x 3/4 1/2 RD x 2-11/16 1/4-28 x 1/2 8-32 x 1/2 1/4-28 x 3/8 1/4-28 x 1/2 1/4-28 x 5/8 1/4-28 x 7/8 1/4-28 x 1 1/4-28 x 1-1/4 1/4-28 x 2-1/2 1/4-20 x 3 5/16-18 x 7/8 5/16-18 x 1 5/16-18 x 2-1/2 3/8-24 x 3/4 M6 x 20mm M6 x 25mm M6 x 30mm M6 x 50mm 33/64 x 1-1/8 x 1/8 5/8 RD x 7/32 1 RD x 1/4
Part Number
PL 0007241 ST 0007241 CWC0007392 OO 00007948 VBS0007948 OO 0007949 VBS0007949 F VBS0007949 R OO 0007951 OO 0007953 OO 0007958 OO 0007959 OO 0007960 OO 0007961 OO 0007962 VD 0011903 DS 0010594 AD 0008411 AD 0010502 CH 0010502 HL 0010502 STA0010502 AH 0011481
Dimensions
7/8 RD x 2-5/16 7/8 SQ x 2-5/16 5/8 RD x 1-5/16 5/8 Hex x 1-1/8 5/8 Hex x 1-1/2 5/8 SQ x 2-13/16 5/8 SQ x 2-15/16 5/8 SQ x 2-5/8 5/8 Hex x 1-13/16 3/8 x 7/8 x 1-11/16 3/8 X 7/8 x 1-15/16 3/8 x 7/8 x 2-3/8 3/8 x 7/8 x 1-11/16 3/8 x 7/8 x 1-15/16 3/8 x 7/8 x 2-3/16 5/16 - 24 x 1 1-1/8 SQ x 3-1/8 1/4 x 5/8 x 1 3/8 x 5/8 x 7/8 3/8 x 3/4 x 13/16 1-1/8 SQ x 1/2 3/8 x 3/4 x 13/16 TCN-1-1/2-13
T-Bolt Shown
Nuts:
Screws:
0101028 0101032 0101036 0150516 0151420 0550305 0550503 0550506 0550508 0550510 0550512 0550704 0550710 0550712 0550910 0570504 0570506 0570508 0570510 0570610 0570710 0570904 0570906 0570908 0570910 0570912 0571016 6A 0008586 MS 0573816 MS 0573817 MS 0573818 5P 0006434 FB 0006906 OO0007963
3/8-16 x 1-3/4 3/8-16x2 3/8-16 x 2-1/4 1/4-28 x 1 1/2-13 x 1-1/4 10-32 x 5/16 1/4-28 x 3/16 1/4-28 x 3/8 1/4-28 x 1/2 1/4-28 x 5/8 1/4-28 x 3/4 5/16-24 x 1/4 5/16-24 x 5/8 5/16-24 x 3/4 3/8-24 x 5/8 1/4-28 x 1/4 1/4-28 x 3/8 1/4-28 x 1/2 1/4-28 x 5/8 1/4-20 x 5/8 5/16-24 x 5/8 3/8-24 x 1/4 3/8-24 x 3/8 3/8-24 x 1/2 3/8-24 x 5/8 3/8-24 x 3/4 3/8-16 x 1 1/4-28 x 1-1/16, 13/16 M8 x 12mm M8 x 16mm M8 x 20mm 1/2 Std 3/4 RD x 1/4 1/2 RD x 3/16
Washers:
Miscellaneous:
Part Number
OR 00027 DT 0009094 CH 0010037 M CHA0010037 CH 0010039 DSA0010595 3 0010901 8 0010901 ST 0010901 D CS 000605801, 02, 03 CSA000605801
Dimensions
1/2 I.D. x 1-11/16 OD x 3/32 CS 7/16 SQ x 1-11/16 25mm Jewel Big Post Back 1000 post back pt 1" 1 RD x 1-1/2 3/4 RD x 1-5/8 5/8 RD x 7/8 Reed CS-35 Knurl B&S 711-8064-100 TPI #SS-30 Str. 3/4 0D x 1/4 ID x 1/4 Round Round
Description
O-Ring Locking Plug Indicator Dial Indicator Dial Screw Clamp Cap for Tool Post Barrel Knurl Diamond Knurl Blank Coolant Ball Coolant Direction Ball
Hardinge Inc.
Elmira, New York 14902-1507 USA
Full-Function Sub-Spindle
Machining on both ends of a workpiece can be accomplished on CONQUEST T51 and T51SP lathes equipped with the ANSI A2-5" 16C collet Sub-Spindle option. Transfer of workpieces from the main spindle to the Sub-Spindle, or vice versa, is accomplished at one synchronized speed. The 7.4-hp (5.5-kW), AC analog spindle motor offers an 80 to 6,000 rpm spindle speed range with a maximum torque of 25.7 ft-lb (35 Nm) at the 1,500-rpm base speed. Speeds are fully programmable in one-rpm increments. A lowpressure air purge system, used in conjunction with a labyrinth seal, protects the bearings from chip and coolant contamination. 3/4" (20 mm) square shank tools mount directly into the tool slot of the dedicated turning tool mounting ring located on the back of the vertical turret; round shank tools mount into holders (see page 4 for illustration). The extensive line of 16C spindle tooling may be used, including the SURE-GRIP 5" through-hole jaw chuck (refer to brochure 2298 for chucks). The maximum depth a workpiece can be swallowed in the spindle is 14-1/4" (361.9 mm), measured from the spindle face. Maximum spindle weight is 75 lb (34 kg), including workholding device(s). The hydraulic collet closer is designed to provide optimum gripping force over a wide range of workpiece configurations. The 16C headstock center shown on page 28 is available for occasional, light-duty tailstock use. The Air Blast System detailed on page 36 and a safety shear feature are included. Sub-Spindle movement is accomplished on linear guideways; positioning is provided either hydraulically or with a ball screw drive. Maximum rapid traverse rate is 300 ipm (7.6 m/min) and maximum travel is 22" (558.8 mm) for hydraulic versions. Maximum rapid traverse rate is 371 ipm (9.4 m/min) and maximum travel is 22.4" (570 mm) for ball screw driven versions. The Sub-spindle is available as original equipment only.
NOTE: Not available on CONQUEST T65-L Long Bed lathes. This option is intended to provide general precision machining capabilities on CONQUEST T51SP machines.
NOTE: Not available on CONQUEST T65-L Long Bed lathes. This option is intended to provide general precision machining capabilities on CONQUEST T51SP machines.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Live Tooling
Live tooling is especially useful for eliminating the need for milling machine operations, or for minimizing mill setup time and the need for special mill fixturing. 2-1/2 and 1 Spindle Orient is included. Live tooling operations can be further enhanced when used in conjunction with the C-Axis Contouring feature (Note: Spindle Orient is not included, or required, on machines equipped with the C-Axis option). Any combination of up to six optional cross-working, end-working, cross-tapping, and end-tapping attachments can be mounted at even-numbered stations on a 12-station turret and 5 attachments on a 10-station turret. Attachments are driven through matching spiral bevel gears by the brushless servomotor, providing a maximum 2.4-hp (1.79-kW) rating at the tool tip with a maximum continuous torque rating of 69 in-lb (7.82 Nm) and a maximum intermittent torque rating of 97 in-lb (10.99 Nm). Speeds are fully programmable either clockwise or counterclockwise in one-rpm increments up to 3,000 rpm. All mounted attachments rotate simultaneously. Refer to page 18 and 19 for detailed information on the attachments. Protective covers are provided for each drive gear box attachment location for when attachment is removed from the turret. Live tooling is available as original equipment only.
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
C-Axis Contouring
C-Axis Contouring allows the main spindle (C-Axis) to be programmed to perform a variety of machining operations. Resolution is .001. Positioning accuracy is 3.6 arc second. There are three applications included Polar Interpolationability to cut with X- and C-axis simultaneously. Includes circular interpolation. Cylindrical Interpolationability to cut with Z- and C-axis simultaneously. Includes circular interpolation. Three-Axis Interpolationability to cut in all 3 axes; X, Z, and C when in G1 mode. Example: Helix cutting Note: Circular cutting cannot be accomplished when cutting with all three axes at the same time. Machines equipped with C-Axis Contouring do not require Spindle Orient. C-Axis Contouring is available as original equipment only.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Both systems facilitate efficient removal of chips from the machine. The variable-speed motor provides a 17.3 fpm (5.3 m/min) maximum feedrate. Recommended feedrate is 4 fpm (1.2 m/min). Unit width is 12" (305 mm) and belt width is 10" (254 mm).
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Steady Rest
This specially-designed and manufactured steady rest assembly consists of a heavyduty, rigid cast iron frame manufactured by Hardinge and the LNS Auto Rest selfcentering work support system. The assembly offers a unique solution to center and hold long cylindrical parts for turning operations involving heavy or interrupted cuts and to reduce cutting tool chatter to maintain precision tolerances and surface finishes. The steady rest assembly mounts directly to the tailstocks dovetail bed way. Once manually positioned, locking screws at the base of the frame allow quick, rigid clamping of the steady rest assembly. A workpiece support arm, which is adjustable for the required part diameter, is also provided. A pressure gauge and hand control valve are located on a manifold block in the machines hydraulic compartment at the rear of the machine. A button on the machines control panel allows the operator to open and close the rollers for job setup. One set of precision, crowned rollers is included. Additional roller sets may be purchased direct from LNS America or from a local bearing distributor. Available on machines equipped with a tailstock only.
LNS and Auto Rest are trademarks of LNS America, Inc.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
The Air Blast System can provide cost reduction through reduced cycle time because chips are removed from the workholding device and a cleaner gripping surface is possible to receive each part. When the machines air system is active, the Air Blast System carries a force of air through the headwall from the standard machine air supply system. The adjustable air carrier tube is mounted by a flange on the headwall. A set screw in the flange allows the tube to be positioned closer to or away from the headwall and to be rotated for an optimum blast angle to clean the area. Standard brass elbow fittings from a T fitting and flexible copper tubing directs air at any position desired by the operator. The thru-headwall air line is added to the existing air system and is activated by a solenoid valve. All lines required to use the Air Blast System will be installed at the time the machine order is placed, or they can be installed in the field. The Air Blast System is included on machines equipped with the Sub-Spindle option.
Spindle
Cooler running and longer lasting tools Smoother surface finishes and possible elimination of other machining operations The coolant system features a 10:1 ratio pressure pump that supports drills up to and including 1-1/2" (38 mm). The system delivers coolant at a maximum of 10 gpm (38 l/min) using a rate of 10x incoming air pressure. The Hardinge CNC control uses M codes in the part program to control the Hi-Pressure Coolant System with the standard coolant system (the standard machine coolant system is disabled when using this option). All required plumbing is performed at the factory during machine assembly. Service for the unit is provided by the coolant system manufacturer. The Hi-Pressure Coolant System is available on the CONQUEST T51 and T65-L Machines only, Available as original equipment only.
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Spindle
Coolant Line
Mist Collector
The Filtermist mist collector is recommended as a quiet and efficient system to quickly filter and eliminate oil mist and dry smoke from the machine enclosure, return collected coolant to the machine, and pass filtered air into the shop. The mist collector consists of a self-cleaning filtration unit and after-filter. The 1-1/2 hp (1 kW) electric drive motor is totally enclosed with sealed bearings, providing 600 cfm throughput. To facilitate easy installation to the top of the machine, the machine enclosure features factory-drilled holes for the four anti-vibration shock-mounts, ducting and drain tube. It is the customers responsibility to provide a power supply to this option separate from the machines power supply. Voltage must be specified at the time of order (voltage may be different than the machine voltage).
Dimensions A C D F H M N S V Inch 9.00 33.00 3.95 19.38 17.38 31.25 15.00 12.00 6.00 MM 228.6 838.2 100.4 492.1 441.3 793.8 381.0 304.8 152.4
N V M C A
S H F
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Auto Door
The Auto Door feature helps reduce operator fatigueespecially useful on fast-cycle part production. Additionally, this option helps ensure operator safety by not allowing the door to close until the operators hands are clear of the work area. The door is programmed to automatically open at the end of a machining cycle. After the operator has loaded the next workpiece in the workholding device, the operator simply closes the door by pressing on two push buttons (Palm Button style) or placing both hands in front of two light beam sensors (Light Touch style). The next machining cycle begins once the door completely closes.
Foot Switches
Collet Closer Foot Switch The collet-open and collet-close foot switch offered by Hardinge allows the machine operator to free both hands for loading/unloading workpieces from the machining area. A cable for direct hookup with the machines interface connection is included. Tailstock Foot Switch The tailstock foot switch offered by Hardinge allows the machine operator to free both hands for loading/unloading workpieces from the machining area. A cable for direct hookup with the machines interface connection is included.
Voltage Transformers
CONQUEST lathes are completely wired and assembled when delivered for 230 volts, 60 cycle, 3 phase operation. An externally-mounted supplementary power transformer is required for 208-, 460- and 575-volt machines. A 230/460-volt transformer is offered that will provide extra protection for 230-volt machines when installed in areas where lightening or electrical surges are a concern. Specification for the necessary transformer must be made at the time the machine is ordered.
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
MondayFriday, 8:00 am to 8:00 pm Eastern Standard Time for FAST delivery!
A HARDINGE Company
Leader in Grinding
MADE IN USA