Escolar Documentos
Profissional Documentos
Cultura Documentos
The IEC Terminal Block product line has expanded in our efforts to help our customers improve efficiency and productivity. These select new products are specifically focused on faster product installation, better use of panel space, and increased in-panel diagnostic capabilities. The expansion includes new screw and spring clamp terminal blocks, as well as exciting new accessories. These new products and accessories fall into a number of key categories. Expanded Multi-Level Blocks New Two-Level and Automotive Style Fusing solutions Expansion of Multi-Connection and Disconnect Products Spring Clamp Flexible Plug-in connection system Specialty and Diagnostic
NEW ACCESSORIES PROVIDE BETTER UTILIZATION OF TERMINAL BLOCKS WITHIN OUR CURRENT OFFERING.
1492-J Power Distribution Center Jumpers Group Marker Carrier Center Jumper Spacer and Center Jumper Connection Blocks Ultra-thin separation plate for space-saving isolation of high volume feed through blocks
Copyright 2007 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
ULTRA-THIN SEPARATION PLATE FOR SPACE-SAVING ISOLATION OF HIGH VOLUME FEED THROUGH BLOCKS
For installations where customers are looking for separation or isolation of banks of terminals, we are offering a new, thinner separation plate to achieve desired separation without significant increases in panel space. This new separation plate, made of rigid Mylar, requires only .014 inches (.35mm) of rail space to achieve the desired separation.
BULLETIN 1492 SCREW CONNECTION TERMINAL BLOCKS 2- & 3-LEVEL FEED-THROUGH BLOCKS
1492-JD4 1492-JD4C 1492-JT3M
BULLETIN 1492 SCREW CONNECTION TERMINAL BLOCKS FEED-THROUGH/HINGED ARM FUSE BLOCKS
1492-JD3FB
1.89" (48mm)
1492-JDG3FB
2.28" (57.8 mm)
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Fuse Size (Not Supplied) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: Accessories Mounting Rails: 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors: Screwless End Retainer DIN Rail - Normal Duty DIN Rail - Heavy Duty Jumpers: Side Jumper 4 pole Side Jumper 3 pole Side Jumper 2 pole Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems: Snap-in marker cards (Handle) Snap-in marker cards (Handle) Snap-in marker cards (Side) Gray Fuse Circuit Feed-through Circuit
Two-level terminal block with feed-through circuit and hinged-arm fuse circuit CSA 300V AC/DC 10 A 20 A 10 A 25 A IEC 500V AC/DC 6.3 A 0.54 mm2
Three-Level terminal block with feed-through circuit, hinged-arm fuse circuit, and ground point CSA 300V AC/DC 10 A 20 A 10 A 25 A IEC 500V AC/DC 6.3 AT 0.54 mm2
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: Gray Red Blue Black Green Yellow Orange Brown White
Two-Level, two-circuit feed-through terminal block 600V AC/DC 35 A CSA 300V AC/DC 30 A IEC 800V AC/DC 32 A 0.54 mm2
Two-level feed-through terminal block with commoning bar connecting circuits 600V AC/DC 35 A CSA 300V AC/DC 30 A IEC 800V AC/DC 32 A 0.54 mm2
Three-level, three-circuit terminal block with ground point CSA IEC 300V 400V AC/DC AC/DC 10 A 24 A #2212 #2612 0.52.5 AWG AWG mm2 0.28 in (7 mm) 4.4 lbin (0.5 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JT3M Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ3TM 1492-EAHJ35 1492-SJ6A-50 1492-GM35 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 20 50 5 25 5 5
#2212 AWG
#2212 AWG
#2610 AWG
#2610 AWG
0.315 in (8 mm) 4.48.8 lbin (0.51.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JD4 1492-JD4-RE 1492-JD4-B 1492-JD4-BL 1492-JD4-G 1492-JD4-Y 1492-JD4-O 1492-JD4-BR 1492-JD4-W Cat. No. Pcs/Pkg 100 100 100 100 100 100 100 100 100 Pcs/Pkg 10 10 2 2 20 20 50 10 20 60 60 60 20 25 5 5
0.315 in (8 mm) 4.48.8 lbin (0.51.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JD4C Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJD4 1492-EAHJ35 1492-CJLJ6-41 1492-CJLJ6-10 1492-CJLJ6-4 1492-CJLJ6-3 1492-CJLJ6-2 1492-PPJD3 1492-GM35 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 100 Pcs/Pkg 10 10 2 2 20 50 10 20 60 60 60 20 25 5 5
5 x 20 mm 0.35 in (9 mm) 5.3 lbin (0.6 Nm) 38 per ft/125 per meter 58+248 F (50+120 C) Cat. No. 1492-JD3FB Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJD3FB 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-SJ8A-4 1492-SJ8A-3 1492-SJ8A-2 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-M7X12 (108/card) 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 20 20 100 50 50 50 50 25 50 5 5 5 5
5 x 20 mm 0.35 in (9 mm) 5.3 lbin (0.6 Nm) 38 per ft/125 per meter 58+248 F (50+120 C) Cat. No. 1492-JDG3FB Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJD3FB 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-SJ8A-4 1492-SJ8A-3 1492-SJ8A-2 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-M7X12 (108/card) 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 20 20 100 50 50 50 50 25 50 5 5 5 5
Gray
Accessories
Mounting Rails: 199-DR1 1 m Symmetrical DIN (Steel) 1492-DR5 1 m Symmetrical DIN (Aluminum) 1492-DR6 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR7 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-EBJD4 Gray End Barrier 1492-EBJD4-B Blue End Anchors: 1492-EAHJ35 DIN Rail - Heavy Duty Jumpers: 1492-CJLJ6-41 Plug-in Center Jumper 41 pole 1492-CJLJ6-10 Plug-in Center Jumper 10 pole 1492-CJLJ6-4 Plug-in Center Jumper 4 pole 1492-CJLJ6-3 Plug-in Center Jumper 3 pole 1492-CJLJ6-2 Plug-in Center Jumper 2 pole Insulated Side Jumper 50 Pole Other Accessories: 1492-PPJD3 Partition Plate Group Marking 1492-GM35 Rail Mount Group Marking Carrier Marking Systems: 1492-MR6X8 (120/card) Snap-in marker cards Snap-in marker cards 1492-M6X5 (200/card)
BULLETIN 1492 SCREW CONNECTION TERMINAL BLOCKS SINGLE CIRCUIT FEED-THROUGH, AND SLIDING DISCONNECT BLOCK
1492-J4TW
1.81" (46 mm)
BULLETIN 1492 SCREW CONNECTION TERMINAL BLOCKS SINGLE CIRCUIT FEED-THROUGH KNIFE DISCONNECT BLOCKS
1492-JKD4
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
1492-J4Q
1492-JSD4
1492-JKD4TW
1492-JKD4Q
1.81" (46 mm)
Note: Height dimension is measured from top of rail to top of terminal block.
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: Accessories Gray
Single level feed-through terminal block with twin connection points on one side CSA 600V AC/DC 30 A #3010 AWG IEC 500V AC/DC 32 A 0.54 mm2
Single level feed-through terminal block with twin connection points on both sides CSA 600V AC/DC 30 A #3010 AWG IEC 500V AC/DC 32 A 0.54 mm2
Single level feed-through terminal block with sliding disconnect CSA 300V AC/DC 28 A #2610 AWG IEC 500V AC/DC 32 A 0.54 mm2
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: With Test Points Accessories Gray Gray
Single level feed-through terminal block with knife disconnect CSA 300V AC/DC 10 A #2210 AWG IEC 400V AC/DC 32 A 0.54 mm
2
Single level feed-through terminal block with knife disconnect. Twin connection points on one side CSA 600V AC/DC 24 A #3010 AWG IEC 500V AC/DC 30 A 0.54 mm
2
Single level feed-through terminal block with knife disconnect. Twin connection points on both sides CSA 600V AC/DC 24 A #3010 AWG IEC 500V AC/DC 30 A 0.54 mm2
0.39 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-J4TW Cat. No. Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 50 20 100 50 10 20 60 60 60 25 50 5 5 5
0.39 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-J4Q Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4Q 1492-EBJ4Q-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJLJ6-41 1492-CJLJ6-10 1492-CJLJ6-4 1492-CJLJ6-3 1492-CJLJ6-2 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X12 (120/card) 1492-M6X12 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 50 20 100 50 10 20 60 60 60 25 50 5 5 5
0.39 in (10 mm) 3.56.2 lbin (0.40.7 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JSD4 Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJSD4 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJJ6-10 1492-CJJ6-4 1492-CJJ6-3 1492-CJJ6-2 1492-TPS23L 1492-TP23 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 20 50 50 50 50 20 25 50 5 5 5
0.512 in (13 mm) 4.45.3 lbin (0.50.6 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JKD4 1492-JKD4TP Cat. No. Pcs/Pkg 50 50 Pcs/Pkg 10 10 2 2 50 50 20 100 50 10 20 60 60 60 50 25 50 5 5 5
0.39 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JKD4TW 1492-JKD4TWTP Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4TW 1492-EBJ4TW-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJLJ6-41 1492-CJLJ6-10 1492-CJLJ6-4 1492-CJLJ6-3 1492-CJLJ6-2 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X12 (120/card) 1492-M6X12 (120/card) Pcs/Pkg 50 50 Pcs/Pkg 10 10 2 2 50 50 20 100 50 10 20 60 60 60 25 50 5 5 5
0.39 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JKD4Q 1492-JKD4QTP Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4Q 1492-EBJ4Q-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJLJ6-41 1492-CJLJ6-10 1492-CJLJ6-4 1492-CJLJ6-3 1492-CJLJ6-2 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X12 (120/card) 1492-M6X12 (120/card) Pcs/Pkg 50 50 Pcs/Pkg 10 10 2 2 50 50 20 100 50 10 20 60 60 60 25 50 5 5 5
Mounting Rails: 199-DR1 1 m Symmetrical DIN (Steel) 1492-DR5 1 m Symmetrical DIN (Aluminum) 1492-DR6 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR7 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-EBJ4TW Gray End Barrier 1492-EBJ4TW-Y Yellow End Anchors: 1492-ERL35 Screwless End Retainer DIN Rail - Normal Duty 1492-EAJ35 1492-EAHJ35 DIN Rail - Heavy Duty Jumpers: 1492-CJLJ6-41 Plug-in Center Jumper 41 pole Plug-in Center Jumper 10 pole 1492-CJLJ6-10 1492-CJLJ6-4 Plug-in Center Jumper 4 pole 1492-CJLJ6-3 Plug-in Center Jumper 3 pole Plug-in Center Jumper 2 pole 1492-CJLJ6-2 Screw Center Jumper - 10 pole Screw Center Jumper - 4 pole Screw Center Jumper - 3 pole Screw Center Jumper - 2 pole Other Accessories: Test Plug Socket Test Plug Group Marking 1492-GM35 Rail Mount Group Marking Carrier 1492-GMC End Anchor Top Marker Carrier 1492-M5X30 (20/card) Cat. No. 1492-GMC Top Marker Tag 1492-MR6X12 Marking Systems: (120/card) Snap-in marker cards Snap-in marker cards 1492-M6X12 (120/card)
Mounting Rails: 199-DR1 1 m Symmetrical DIN (Steel) 1492-DR5 1 m Symmetrical DIN (Aluminum) 1492-DR6 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR7 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-EBJ3 Gray End Barrier 1492-EBJ3-Y Yellow End Anchors: 1492-ERL35 Screwless End Retainer 1492-EAJ35 DIN Rail - Normal Duty 1492-EAHJ35 DIN Rail - Heavy Duty Jumpers: 1492-CJLJ6-41 Plug-in Center Jumper 41 pole Plug-in Center Jumper 10 pole 1492-CJLJ6-10 1492-CJLJ6-4 Plug-in Center Jumper 4 pole 1492-CJLJ6-3 Plug-in Center Jumper 3 pole 1492-CJLJ6-2 Plug-in Center Jumper 2 pole Other Accessories: 1492-SPJ3 Partition Plate Group Marking 1492-GM35 Rail Mount Group Marking Carrier 1492-GMC End Anchor Top Marker Carrier 1492-M5X30 (20/card) Cat. No. 1492-GMC Top Marker Tag 1492-MR6X12 Marking Systems: (120/card) Snap-in marker cards 1492-M6X12 (120/card) Snap-in marker cards
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
1492-J3DF
1.56" (39.5 mm)
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: Accessories Mounting Rails: 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors: Screwless End Retainer DIN Rail - Normal Duty DIN Rail - Heavy Duty Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems: Snap-in marker cards Snap-in marker cards Green/Yellow
Single-level ground block with twin connection points on one side CSA Grounding #3010 AWG IEC
Single-level ground block with twin connection points on both sides CSA Grounding #3010 AWG IEC
Single-level feed through block with circuit-break test/measurement plug capability CSA 300V AC/DC 8A #2610 AWG IEC 500V AC/DC 6A 0.54 mm2
Single-level diode forward terminal block with test plug sockets on both sides CSA 300V AC/DC 10 A 1A IEC 500V AC/DC 14 A 0.52.5 mm2
0.54 mm2
0.54 mm2
Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density (Blocks per ft/meter) Housing Temperature Range Terminal Blocks Color: Accessories Mounting Rails: 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors: Screwless End Retainer DIN Rail - Normal Duty DIN Rail - Heavy Duty Other Accessories: Partition Plate Test Plug Test Plug - Make Before Break Test Plug - Break Before Make Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems: Snap-in marker cards Snap-in marker cards Gray
0.394 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JG4TW Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4TW-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X12 (120/card) 1492-M6X12 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 25 50 5 5 5
0.394 in (10 mm) 5.38.8 lbin (0.61.0 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-JG4Q Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4Q-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X12 (120/card) 1492-M6X12 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 25 50 5 5 5
#2612 AWG
0.394 in (10 mm) 4.47.1 lbin (0.50.8 Nm) 49 per ft/163 per meter 58+248 F (50+120 C) Cat. No. 1492-J4CTB Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ4CTB 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-TPCMB 1492-TPCBM 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR6X8 (120/card) 1492-M6X5 (200/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 25 25 25 50 5 5 5
0.394 in (10 mm) 4.46.2 lbin (0.50.7 Nm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. 1492-J3DF Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBJ3 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-SPJ3 1492-TP23 1492-GM35 1492-GMC 1492-M5X30 (20/card) 1492-MR5X12 (120/card) 1492-M5X12 (144/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 50 20 25 50 5 5 5
Yellow
Gray
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
BULLETIN 1492 SPRING-CLAMP TERMINAL BLOCKS 1 & 2 CIRCUIT FEED-THROUGH PLUG-IN CONNECTION BLOCKS
1492-L31P
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
1.08" (27.5 mm)
1492-L3T1P
1.08" (27.5 mm)
1492-LD32P
1492-LG31P
1492-LG3T1P
Note: Height dimension is measured from top of rail to top of terminal block.
Specifications
Single-circuit terminal block with Single-circuit terminal block with Single-circuit terminal block with 1 fixed and 1 plug-in connection. 2 fixed and 1 plug-in connection. 2 fixed and 2 plug-in connection. Plug-in connectors can be individual Plug-in connectors can be individual Plug-in connectors can be individual or grouped configurations. or grouped configurations. or grouped configurations.
CSA 300V AC/DC 20 A 600V AC/DC 5A 26 12 AWG 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. Gray 1492-L31P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBL31P 1492-EBL31P-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 50 Pole 10 Pole 9 Pole 8 Pole 7 Pole 6 Pole 5 Pole 4 Pole 3 Pole 2 Pole 1492-CJLJ5-50 1492-CJLJ5-10 1492-CJLJ5-9 1492-CJLJ5-8 1492-CJLJ5-7 1492-CJLJ5-6 1492-CJLJ5-5 1492-CJLJ5-4 1492-CJLJ5-3 1492-CJLJ5-2 1492-TPL5P Gray Green Gray Gray Gray 1492-STP 1492-STP-G 1492-SBSTP 1492-GSTP 1492-EBSTP 1492-STPLE Yellow Yellow Yellow 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) 50 25 25 50 5 5 5 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) 50 25 25 50 5 5 5 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) 50 25 25 50 5 5 5 IEC 500V AC/DC 24 A 0.52.5 mm2 CSA 300V AC/DC 20 A 600V AC/DC 5A 26 12 AWG 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. 1492-L3T1P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBL3T1P 1492-EBL3T1P-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJLJ5-50 1492-CJLJ5-10 1492-CJLJ5-9 1492-CJLJ5-8 1492-CJLJ5-7 1492-CJLJ5-6 1492-CJLJ5-5 1492-CJLJ5-4 1492-CJLJ5-3 1492-CJLJ5-2 1492-TPL5P 1492-STP 1492-STP-G 1492-SBSTP 1492-GSTP 1492-EBSTP 1492-STPLE IEC 500V AC/DC 24 A 0.52.5 mm2 CSA 300V AC/DC 20 A 600V AC/DC 5A 26 12 AWG 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. 1492-L3Q2P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBL3Q2P 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJLJ5-50 1492-CJLJ5-10 1492-CJLJ5-9 1492-CJLJ5-8 1492-CJLJ5-7 1492-CJLJ5-6 1492-CJLJ5-5 1492-CJLJ5-4 1492-CJLJ5-3 1492-CJLJ5-2 1492-TPL5P 1492-STP 1492-STP-G 1492-SBSTP 1492-GSTP 1492-EBSTP 1492-STPLE IEC 500V AC/DC 24 A 0.52.5 mm2
Specifications
Certifications Voltage Rating Maximum Current Limited Rating - Voltage Limited Rating - Current Wire Range (Rated Cross Section) Wire Strip Length Density (Blocks per foot/meter) Housing Temperature Range Terminal Blocks Color Accessories Mounting Rails 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors Screwless End Retainer DIN Rail - Normal Duty Din Rail - Heavy Duty Jumpers Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Other Accessories Test Adapter Individual Plug-in Connector Ganged Connector Start Plug Ganged Connector Middle Plug Ganged Connector End Plug Plug-In Component Accessories Locking Element Coding Element Strain Relief Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems Snap-in Marker Cards Snap-In Marker Cards Gray Yellow
Two-circuit terminal block with 1 fixed and 1 plug-in connection on each level. Plug-in connectors can be individual or grouped configurations.
IEC CSA 300V 500V AC/DC AC/DC 20 A 24 A 600V AC/DC 5A 26 0.52.5 12 AWG mm2 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. Gray Green/Yellow 1492-LD32P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBLD32P 1492-ERL35 1492-EAJ35 1492-EAHJ35 50 Pole 10 Pole 9 Pole 8 Pole 7 Pole 6 Pole 5 Pole 4 Pole 3 Pole 2 Pole Gray Green Gray Gray Gray 1492-CJLJ5-50 1492-CJLJ5-10 1492-CJLJ5-9 1492-CJLJ5-8 1492-CJLJ5-7 1492-CJLJ5-6 1492-CJLJ5-5 1492-CJLJ5-4 1492-CJLJ5-3 1492-CJLJ5-2 1492-STP 1492-STP-G 1492-SBSTP 1492-GSTP 1492-EBSTP 1492-STPLE 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 10 20 20 20 20 20 20 60 60 60 50 50 50 50 50 25 50 25 25 50 5 5 5
Certifications Voltage Rating Maximum Current Limited Rating - Voltage Limited Rating - Current Wire Range (Rated Cross Section) Wire Strip Length Density (Blocks per foot/meter) Housing Temperature Range Terminal Blocks Color
Pcs/Pkg 50 Pcs/Pkg 10
Grounding 26 0.52.5 12 AWG mm2 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. 1492-LG31P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBL31P-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-STP-G 1492-STPLE 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 50 25 50 25 25 50 5 5 5
Grounding 26 0.52.5 12 AWG mm2 0.394 in (10 mm) 59 per ft/196 per meter 58+248 F (50+120 C) Cat. No. 1492-LG3T1P Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBL3T1P-Y 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-STP-G 1492-STPLE 1492-STPCE 1492-STPSR 1492-GM35 1492-GMC 1492-M5X30(20/card) 1492-MR5X12 (120/card) 1492-MR5X8 (120/card) Pcs/Pkg 50 Pcs/Pkg 10 10 2 2 50 20 100 50 50 25 50 25 25 50 5 5 5
Accessories
10 2 2 50 20 100 50 10 20 20 20 20 20 20 60 60 60 25 50 50 50 50 50 25
Mounting Rails 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors Screwless End Retainer DIN Rail - Normal Duty Din Rail - Heavy Duty Jumpers Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Plug-in Center Jumper Individual Plug-in Connector Ganged Connector Start Plug Ganged Connector Middle Plug Ganged Connector End Plug Plug-In Component Accessories Locking Element Coding Element Strain Relief Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems Snap-in Marker Cards Snap-In Marker Cards
Gray Yellow
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
Blocks contain dual UL/CSA listings and can be used at 300V with a 20 A rating or 600V with a 5 A rating. For ganged configurations greater than 2, use multiple 1492-GSTP plug-in blocks.
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
Blocks contain dual UL/CSA listings and can be used at 300V with a 20 A rating or 600V with a 5 A rating. For ganged configurations greater than 2, use multiple 1492-GSTP plug-in blocks.
1492-SJ8A-2
0.319" (8.1 mm) 2.76" (70 mm)
50
Specifications Certifications Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Density Housing Temperature Range Terminal Blocks Color Accessories Mounting Rails 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors Screwless End Retainer DIN Rail - Normal Duty Din Rail - Heavy Duty Jumpers Plug-in Center Jumper 32 Pole Plug-in Center Jumper 4 Pole Plug-in Center Jumper 3 Pole Plug-in Center Jumper 2 Pole Test Adapter Group Marking Rail Mount Group Marking Carrier End Anchor Top Marker Carrier Cat. No. 1492-GMC Top Marker Tag Marking Systems Snap-in Marker Cards Snap-In Marker Cards Black (Without blown fuse indication) Black (With blown fuse indication) -LAFB6 -LAFB624 30 A
Single-circuit automotive style fuse terminal block with or without LED blown fuse indication CSA IEC 300V AC/DC 250V AC/DC 1036V AC/DC 25 A 30 A 2210 AWG 0.56 mm2 0.394 in (10 mm) 37 per ft/123 per meter 58+248 F (50+120 C) Cat. No. 1492-LAFB6 1492-LAFB624 Cat. No. 199-DR1 1492-DR5 1492-DR6 1492-DR7 1492-EBLAFB6 1492-ERL35 1492-EAJ35 1492-EAHJ35 1492-CJL8-32 1492-CJL8-4 1492-CJL8-3 1492-CJL8-2 1492-TPL8 1492-GM35 Pcs/Pkg 25 25 Pcs/Pkg 10 10 2 2 50 20 100 50 10 60 60 60 25 25 50 5 5 5
Separation Plate
Cat. No. Pcs/ Pkg
25
End Barriers
Photo Cat. No. Pcs/Pkg 1492-EBJD4 20 1492-EBJD4-B 20 1492-EBJD4-Y 20 1492-EBJD3FB 20 1492-EBJ3TM 20 1492-EBJ4CTB 50 1492-EBJ4Q 50 1492-EBJ4Q-Y 50 1492-EBJ4TW 50 50 1492-EBJ4TW-Y 1492-EBL3T1P 50 1492-EBJSD4 50 1492-EBL31P 50 1492-EBL31P-Y 50 1492-EBL3Q2P 50 1492-EBLD32P 50 1492-EBL3T1P-Y 50 1492-EBLAFB6 50
Black
1492-STP-G
50
1492-SBSTP 1492-GSTP
Ganged connector - start plug - Gray Ganged connector - middle plug - Gray
50 50
1492-EBSTP
50
The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.
1492-STPLE 1492-TPCMB 25
25
50
1492-TPCBM