Escolar Documentos
Profissional Documentos
Cultura Documentos
MANU
169
CODE
COMBINATION ALIGNER
Material: Conductive Nylon. Shaft: long end 18 (3.2 mm) dia., 212 (6.3 cm) long; short end 732 (5.5 mm) dia., 2716 (6.2 cm) long. Ends: 132 thick screwdriver tip (long end); 18 (3.2 mm) wide steel tip, recessed 116 (short end). Total Length: 41516 (12.5 cm).
Cat. No. AS-8275-0000 Net Price $3.15
ADJUSTMENT SCREWDRIVER
Material: Conductive Nylon. Shaft: 14 (6.3mm) dia., 7 (17.7 cm) long. Ends: 132 thick screwdriver tip (Both ends). Total Length: 7 (17.7 cm).
Cat. No. AS-5004-0000 Net Price $2.57
1294
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
GC Alignment Tools
SQUARE & HEX END TOOL
Hex: 0.100 (2.5 mm) Square: 116 (1.6 mm). Material: Conductive Nylon. Ends: 0.100 (2.5 mm) hex, 38 (9.5 mm) long; 116 (0.062 -1.6 mm) square, 132 (0.1 cm) long. Total Length: 5116 (12.8 cm).
Cat. No. AS-9440-0000 Net Price $1.71
MANU
169
CODE
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
1295
GC Alignment Tools
MANU
169
CODE
11 .100 extra long to prevent hand capacity. .100 hex on both sides, one end undercut for tuning bottom slugs. Handle diameter 532 .
Cat. No. 00-9295-0000 Description Double End Delrin Net Price $3.38
11 .075 Hex, double end hex iron core tool. Makes it possible to turn both top and bottom coil slugs with one tool. One end under-cut for turning bottom slug separately. Has knurled 14 handle.
Cat. No. 00-9296-0000 Net Price $2.99
11 .075 hex, double end hex iron core tool with 532 handle. One end undercut for turning bottom slug separately. Will turn both top and bottom coil slugs.
Cat. No. 00-9297-0000 Net Price $3.45
1296
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
GC Alignment Tools
G-C DOUBLE END HEX ALIGNMENT TOOL
For adjusting coil slugs. A general purpose alignment tool as well as a coil slug adjuster. Both ends are .075 hex, with one end undercut. A tool of many uses.
Cat. No. 00-9300-0000 Description Double End Hex Tool Net Price $2.15
MANU
169
CODE
0000 TV channel tuning tool, 00-8196-0000 TV-FM tuning tool, 00-8271-0000 core aligner, 00-8273-0000 TV aligner, 00-8274-0000 long-reach aligner, 008275-0000 universal aligner, 00-8276-0000 duplex aligner, 00-8277-0000 shorty duplex aligner, 00-8279-0000 core aligner, 00-8282-0000 Zenith alignment tool, 00-8606-0000 hex wrench5 , 00-8608-0000 potentiometer adjustment tool.
Cat. No. 00-8280-0000 Net Price $37.48
For Arvin, Regency, Silvertone and others. 11532 .121 dia. shaft, 932 .062 square head, .070 .029 tip. 138 .145 dia. shaft, 38 .104 hex head, 116 .075 .042 tip.
Cat. No. 00-9440-0000 Net Price $1.50
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
1297
GC Alignment Tools
MANU
169
CODE
GC burnishing tools consist of stainless steel strips, micro-scored to an ultra-fine file surface. They remove oxide and corrosion on relay and switch contact points made of platinum, paladium, molydenum, gold tungsten, and silver. The standard tool is used on medium and large contact points whereas the fineline tool is recommended for use on small and miniature components.
Cat. No. 00-9337-0000 00-9338-0000 Description Fineline (0.120 wide) Standard width (14 ) Net Price $1.86 1.86
1298
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
GC Service Aids
MANU
169
CODE
Ideal for use in the field. Cuts and strips RG-58/U or RG-59/U coaxial cables in quick clean steps. Toggle latch keeps stripper closed. 314 218 114 . Weighs only 2.6 oz.
Cat. No. 12-0164-0000 12-0165-0000 Description Stripper Replacement Blade Set Net Price $35.50 2.55
CRIMPING TOOL
FOR F CONNECTORS Makes an excellent hex crimp in all F-Type and BNC connectors.
Cat. No. 12-0455-0000 Net Price $28.76
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
1299
MANU
328
CODE
Designed to press UG, UR, and UY connectors. A special stop behind cut out prevents damage to connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24, and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. The cushioned grip handles are yellow plastic dipped. Length: 6 .
Cat. No. JIC-891 Net Price $19.20
M-125 M-130/SXP
M-145
1386
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURERS CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED