Escolar Documentos
Profissional Documentos
Cultura Documentos
Darlington Transistors
NPN Silicon
Features
http://onsemi.com
COLLECTOR 3
MAXIMUM RATINGS
Rating Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCES VCBO VEBO IC PD 625 5.0 PD 1.5 12 TJ, Tstg 55 to +150 W mW/C C 1 2 Symbol RqJA RqJC Max 200 83.3 Unit C/mW C/mW 3 mW mW/C Value 30 30 10 500 Unit Vdc Vdc Vdc mAdc
BASE 2
EMITTER 1
MARKING DIAGRAM
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, JunctiontoAmbient Thermal Resistance, JunctiontoCase
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
x = 3 or 4 A = Assembly Location Y = Year WW = Work Week G = PbFree Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Semiconductor Components Industries, LLC, 2005
MPSA13, MPSA14
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Characteristic OFF CHARACTERISTICS Collector Emitter Breakdown Voltage (IC = 100 mAdc, IB = 0) Collector Cutoff Current (VCB= 30 Vdc, IE = 0) Emitter Cutoff Current (VEB= 10 Vdc, IC = 0) ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 10 mAdc, VCE = 5.0 Vdc) (IC = 100 mAdc, VCE = 5.0 Vdc) Collector Emitter Saturation Voltage (IC = 100 mAdc, IB = 0.1 mAdc) Base Emitter On Voltage (IC = 100 mAdc, VCE = 5.0 Vdc) SMALL SIGNAL CHARACTERISTICS CurrentGain Bandwidth Product (Note 2) (IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2.0%. 2. fT = |hfe| S ftest. fT 125 MHz hFE MPSA13 MPSA14 MPSA13 MPSA14 VCE(sat) VBE(on) 5,000 10,000 10,000 20,000 1.5 2.0 Vdc Vdc V(BR)CES ICBO IEBO 30 100 100 Vdc nAdc nAdc Symbol Min Max Unit
ORDERING INFORMATION
Device MPSA13 MPSA13G MPSA13RLRA MPSA13RLRAG MPSA13RLRM MPSA13RLRMG MPSA13RLRP MPSA13RLRPG MPSA13ZL1 MPSA13ZL1G MPSA14 MPSA14G MPSA14RLRA MPSA14RLRAG MPSA14RLRP MPSA14RLRPG Package TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) Shipping 5000 Units / Box 5000 Units / Box 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 5000 Units / Box 5000 Units / Box 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
2
MPSA13, MPSA14
RS
in en
IDEAL TRANSISTOR
NOISE CHARACTERISTICS
(VCE = 5.0 Vdc, TA = 25C)
500 200 100 10 mA 50 100 mA 20 IC = 1.0 mA 10 5.0 10 20 50 100 200 500 1 k 2 k 5 k 10 k 20 k f, FREQUENCY (Hz) 50 k 100 k 2.0 BANDWIDTH = 1.0 Hz i n, NOISE CURRENT (pA) 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 10 20 50 100 200 500 1 k 2 k 5 k 10 k 20 k f, FREQUENCY (Hz) 50 k 100 k 100 mA 10 mA
BANDWIDTH = 1.0 Hz RS 0
IC = 1.0 mA
100 70 50 30 20
100 mA
1.0 mA 10
1.0
2.0
5.0
500
1000
0 1.0
2.0
5.0
500
1000
http://onsemi.com
3
MPSA13, MPSA14
SMALLSIGNAL CHARACTERISTICS
20 TJ = 25C |h fe |, SMALLSIGNAL CURRENT GAIN 4.0 VCE = 5.0 V f = 100 MHz TJ = 25C
C, CAPACITANCE (pF)
10 7.0 5.0
2.0
Cibo Cobo
3.0
2.0 0.04
0.1
20
40
0.2 0.5
1.0
2.0
500
Figure 6. Capacitance
VCE , COLLECTOREMITTER VOLTAGE (VOLTS)
200 k TJ = 125C hFE , DC CURRENT GAIN 100 k 70 k 50 k 30 k 20 k 10 k 7.0 k 5.0 k 3.0 k 2.0 k 5.0 7.0 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500
25C
2.0
1.5
55 C VCE = 5.0 V
0.5 1.0 2.0 5.0 10 20 50 100 200 IB, BASE CURRENT (mA)
500 1000
1.6 TJ = 25C 1.4 V, VOLTAGE (VOLTS) VBE(sat) @ IC/IB = 1000 1.2 VBE(on) @ VCE = 5.0 V 1.0
25C TO 125C
55 C TO 25C
25C TO 125C 4.0 qVB FOR VBE 5.0 6.0 5.0 7.0 10 55 C TO 25C
0.8 0.6
VCE(sat) @ IC/IB = 1000 5.0 7.0 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500
500
http://onsemi.com
4
MPSA13, MPSA14
1.0 0.7 0.5 0.3 0.2 0.1 0.1 0.07 0.05 0.03 0.02 0.01 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) 100 0.05 SINGLE PULSE
D = 0.5 0.2
SINGLE PULSE ZqJC(t) = r(t) RqJC TJ(pk) TC = P(pk) ZqJC(t) ZqJA(t) = r(t) RqJA TJ(pk) TA = P(pk) ZqJA(t)
200
500
1.0 k
2.0 k
5.0 k 10 k
1.0 k 700 500 300 200 100 70 50 30 20 10 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 0.4 0.6 TA = 25C TC = 25C
FIGURE A tP PP PP
http://onsemi.com
5
MPSA13, MPSA14
PACKAGE DIMENSIONS TO92 TO226AA CASE 2911 ISSUE AL
A R P L
SEATING PLANE
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 0.250 0.080 0.105 0.100 0.115 0.135 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 6.35 2.04 2.66 2.54 2.93 3.43
X X G H V
1
D J C SECTION XX N N
DIM A B C D G H J K L N P R V
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
6
MPSA13/D