Você está na página 1de 8

Type NCX Cutout

7.8/15 - 38 kV Outdoor Distribution Cutout


Product Bulletin 1VAG271501-DB

Product Features
7.8/15 kV, 15 kV, 15/27 kV, 20/34.5 kV, 27 kV, and 38 kV
110, 125, 150, and 200 kV BIL 100 A, 200 A Fused

Description
The NCX cutout has a long history of providing safe, reliable overcurrent protection to the industry. The NCX design provides overcurrent protection for equipment that may be damaged by system overload or fault conditions. Porcelain, polymer concrete, or silicone insulators and cutout/arrester combinations are available on certain models.

Ratings
300 A Disconnect Blade

Porcelain, Polymer Concrete, or Silicone Insulators Available


Cutout/Arrester Combo

The NCX is offered in several frame sizes to properly match each system BIL. Each fuse support has universal contacts that accommodate a 100 A fuseholder, a 200 A fuseholder, or a 300 A disconnect blade.

Design Features
The 100 A fuseholder will accommodate standard or removable buttonhead-type fuse links rated from 1 A to 100 A. The 200 A fuseholder accommodates fuse links rated from 140 A to 200 A. The selection of the appropriate fuse link size and type for a particular application is a function of the continuous load current to be carried, the type of equipment to be protected, and the required coordination with other overcurrent protective equipment. Types of protective equipment include circuit breakers, power reclosers, and other fused cutouts. The NCX offers a variety of fault current interrupting ratings. Rating flexibility is achieved through the use of solid caps, expulsion caps, or link extenders. The 100 A expulsion cap is designed to vent when subjected to a pressure of 2,000 psi. The 200 A expulsion cap is designed to vent when subjected to a pressure of 1,300 psi. The additional vent allows the NCX to more efficiently expel the ionized gases from the fuse tube and thus greatly improves its interrupting capability. Link extender caps can be utilized for design configurations which require single venting. The link extender positions the fusible element lower inside the fuse tube, thereby reducing the amount of pressure which can build up in the tube. The net effect gives the tube a higher interrupting rating.

Standards and Design Testing


The NCX cutout meets or exceeds all applicable requirements of EEI, NEMA SG-2, and IEEE C37.41 and C37.42 standards.

Porcelain NCX with arrester combination

Silicone NCX -2-

Options
Silicone Rubber Silicone rubber has been used for more than thirty years as an outdoor insulation material and is the fastest growing choice for polymeric material for medium and high voltage outdoor insulation. Silicone is used for its superior performance, durability, and insulation properties. It has the unique ability to maintain its hydrophobicity and offers greater stability against heat and ultraviolet radiation compared to other polymers. In addition, silicone cutouts are 30% - 50% lighter than porcelain units. Silicone insulators are available in all ratings up to 180 kV BIL. Polymer Concrete ABB has been using polymer concrete for more than fifteen years. Available in 110 and 125 kV BIL ratings, polymer concrete provides a safe, shatter-proof design with molded-in rods to prevent moisture penetration. Because it resists damage from freeze/thaw cycles, the material is an excellent alternative to porcelain in colder climates. Polymer concrete is a field-proven material that provides excellent electrical properties and dielectric strengths, as well as superior mechanical durability. Arrester Combinations ABB offers a combination NCX cutout with an arrester option. This combination unit is pre-assembled at the factory and provides overall savings by reducing installation time and accumulated costs that result from independently purchased parts.
NCX combination units are available with various mounting brackets to fulfill industry requirements. The combo units are equipped with normal duty, heavy duty, or riser pole duty polymer metal oxide arresters.

Construction Details
Fuse Tube Construction The NCX cutouts utilize two different types of fuse tubes: a moisture-proof fuse tube or a high-strength glass fuse tube. The moisture-proof fuse tube is available on most 100 A designs and reduces swelling that can create problems with interruption.
The 200 A design utilizes a high-strength glass fuse tube. This fuse tube is composed of a horn fiber liner surrounded by a glass filament wound outer shell. Both designs have a durable tube that withstands the rigors of high fault current interruptions. In addition, the tube is applied with electrostatic powder paint to provide protection against the effects of ultraviolet rays.

Voltage Levels Single voltage rated cutouts can be applied on any single or three-phase system where the line-to-line voltage does not exceed the cutout rating. Dual voltage rated cutouts are suitable on single-phase circuits where maximum line-to-ground voltage does not exceed the value shown to the left of the slash (for example, does not exceed 15 kV in 15/27kV).
NCX dual voltage rated cutouts may be used on threephase circuits that are solidly grounded and the maximum line-to-line voltage does not exceed the value shown to the right of the slash (for example, does not exceed 27 kV in 15/27 kV). Each frame size has fault interrupting ratings at more than one voltage level. An extensive testing program was performed to develop these multi-voltage capabilities. As a result of this program, the voltage rating of some NCX cutouts may be increased by changing the fuseholder.

Polymer concrete NCX

Porcelain NCX with 300 A disconnect blade Silicone NCX with arrester combination -3-

Unit Dimensions
A B
.312 NEMA "A" BRKT .375 NEMA "B" BRKT

2.63 [67]

3.00 [76] to 4.00 [102]

7.75 [197]

1.56 [40]

FR

Note: Metric dimensions are displayed in [mm].


.81 [21]

E
Unit Dimensions (in) A
12.63 13.44 13.44 13.44

kV Class
7.8/15 or 15 15/27 or 27 15/27 or 27 20/34.5 or 38

BIL (kV)
110 125 150 150

Creep (in) E FR
12.63 16.25 16.25 16.25

Weight (lb) Polymer Concrete


8.5 12 -

B
6.69 7.06 7.06 7.06

C
6.28 7.97 7.97 7.97

D
15.47 18.22 18.22 18.22

Porcelain
9.10 12.80 18.00 18.00

Silicone
14.96 18.90 18.90 18.90

Porcelain
11.70 14.94 22.72 22.72

Silicone
8.80 9.42 9.52 9.52

Polymer Concrete
11.70 13.60 -

6.03 5.31 5.31 5.31

kV Class
7.8/15 or 15 15/27 or 27 15/27 or 27 20/34.5 or 38

BIL (kV)
110 125 150 150

Unit Dimensions (mm) A B C D E FR Porcelain


231.14 325.12 457.20 457.20

Creep (mm) Silicone


379.98 480.06 480.06 480.06

Weight (kg) Polymer Concrete


216 305 -

Porcelain
5.31 6.78 10.31 10.31

Silicone
3.99 4.27 4.32 4.32

Polymer Concrete
5.30 6.17 -

320.80 169.93 159.51 392.94 153.16 320.80 341.38 179.32 202.44 462.79 134.87 412.75 341.38 179.32 202.44 462.79 134.87 412.75 341.38 179.32 202.44 462.79 134.87 412.75

Bracket Dimensions
.312 [8]
.38 [10]

Part numbers listed on page 8. Note: Metric dimensions are displayed in [mm].

7.8 [198]

.375 [10]
1.6 [40]
5.4 [137] 1.5 [38]

7.8 [198]

2.6 [67]

7.8 [198]

12.8 [325]

9.1 [231]

NEMA A bracket
1.6 [40] 2.6 [67]

Extended bracket

6.9 [175]

2.2 [56]

NEMA B bracket

-4-

Pole Mounting bracket

Ordering Instructions for Silicone NCX Cutouts


* Refer to page 7 for porcelain cutout style numbers.

7.8/15 kV and 15 kV NCX Silicone


DIGIT 4
Terminal Connectors N = No terminal C = Clamshell E = Eyebolt

DIGIT 6
Special Options N = None

J
DIGIT 5
Bracket N = No bracket A = NEMA A B = NEMA B L = Extended C = Universal Combo BM11 = 100 A, 10 kAIC, Solid cap (rated 15 kV) QA11 = 100 A, 16 kAIC, Expendable cap (rated 15 kV only) EA21 = 200 A, 8 kAIC, Solid cap (rated 15 kV) GA21 = 200 A, 10 kAIC, Link extender (rated 15 kV) UA21 = 200 A, 12 kAIC, Expendable cap (rated 15 kV only) VA31 = 300 A, Solid disconnect blade (rated for 7.8/15 kV and 15 kV)

DIGITS 7-10
Fuseholder AM11 = 100 A, 12 kAIC, Solid cap (rated 7.8/15 kV only) NA11 = 100 A, 20 kAIC, Expendable cap (rated 7.8/15 kV only) DA21 = 200 A, 12 kAIC, Solid cap (rated 7.8/15 kV only) PA21 = 200 A, 20 kAIC, Expendable cap (rated 7.8/15 kV only)

15/27 kV and 27 kV NCX Silicone


DIGIT 2
Insulator BIL 2 = 125 kV BIL 4 = 150 kV BIL 600 mm creep (silicone only) 5 = 150 kV BIL

0000

= Cutout Support only (no tube)

DIGIT 4
Terminal Connectors N = No terminal C = Clamshell E = Eyebolt

DIGIT 6
Special Options N = None

J
DIGIT 5
Bracket N = No bracket B = NEMA B L = Extended C = Universal Combo

DIGITS 7-10
Fuseholder BM12 = 100 A, 10 kAIC, Solid cap (rated 15/27 kV only) QA12 = 100 A, 16 kAIC, Expendable cap (rated 15/27 kV only) FA22 = 200 A, 10 kAIC, Solid cap (rated 15/27 kV only) HA22 = 200 A, 16 kAIC, Link extender (rated 15/27 kV only) CM12 = 100 A, 6 kAIC, Solid cap (rated 27 kV or 20/34.5 kV) TA12 = 100 A, 12 kAIC, Expendable cap (rated 20/34.5 kV)

SA12 = 100 A, 12 kAIC, Expendable cap (rated 27 kV) KM12 = 100 A, 12 kAIC, Link extender (rated 27 kV or 20/34.5 kV) VA32 = 300 A, Solid disconnect blade (rated for 15/27 kV and 27 kV) 0000 = Cutout Support only (no tube)

Ordering Instructions continued on page 6

-5-

Ordering Instructions for Silicone NCX Cutouts (cont'd)


* Refer to page 7 for porcelain cutout style numbers.

20/34.5 kV and 38 kV NCX Silicone


DIGIT 2
Insulator BIL 4 = 150 kV BIL 600 mm creep (silicone only) 5 = 150 kV BIL

DIGIT 4
Terminal Connectors N = No terminal

DIGIT 6
C = Clamshell E = Eyebolt Special Options N = None

J
DIGIT 5
Bracket N = No bracket B = NEMA B L = Extended C = Universal Combo

DIGITS 7-10
Fuseholder CM12 = 100 A, 6 kAIC, Solid cap TA12 = 100 A, 12 kAIC, Expendable cap

KM12 = 100 A, 12 kAIC, Link extender VA32 = 300 A, Solid disconnect blade (rated for 15/27 kV & 27 kV) 0000 = Cutout Support only (no tube)

NCX Cutout Arrester Combination


DIGIT 4
Cutout Cap S = 100A Solid cap E = 100A Expendable cap L = 100A Link extender (only for 27 kV or 20/34.5 kV units) T = 200A Solid cap R = Riser pole F = 200A Expendable cap

DIGIT 11 DIGIT 6
Arrester Type C = Polymer normal duty H = Polymer heavy duty

DIGIT 2
Voltage Level 1 = 15 kV 2 = 27 kV 3 = 38 kV (use 150 kV BIL insulator)

DIGIT 9
Cutout Terminals 1 = Clamshell 2 = Eyebolt

Cutout Insulator Material (Blank) = Porcelain J = Silicone Z = Polymer concrete (only available for 110 kV BIL cutouts)

N
DIGIT 3
Insulator BIL 1 = 110 kV BIL 2 = 125 kV BIL 5 = 150 kV BIL

DIGIT 5
Bracket A = Short combo U = Long combo Contact factory for other options

DIGITS 7 & 8
Arrester Voltage 03 = 06 = 09 = 3 kV 6 kV 9 kV

DIGIT 10
Special Options 1 = None 8 = 12 lead B = Arrester bird guard X = No arrester but in combo box

10 = 10 kV 12 = 12 kV 15 = 15 kV 18 = 18 kV 21 = 21 kV 24 = 24 kV 27 = 27 kV

-6-

Porcelain NCX Cutout Style Numbers


RATINGS Voltage
Voltage
7.8/15 7.8/15 7.8/15 7.8/15 15 15 15 15 15 15 15/27 15/27 15/27 15/27 15/27 15/27 20/34.5 20/34.5 20/34.5 20/34.5 27 27 27 27 38 38 38 38

STYLE NUMBER Current Cap Type on Fuseholder


Solid Expendable Solid Expendable Solid Expendable Solid Link extender Expendable Blade Solid Expendable Solid Link extender Link extender Expendable Solid Expendable Link extender Link extender Expendable Link extender Link extender Blade Solid Link extender Link extender Blade

Clamshell Terminal Connectors


with NEMA Brkt
279C601A03MP 279C601A04 279C601A05 279C601A06 279C601A10MP 279C601A11 279C601A12 4991C51A23 279C601A13 279C601A14 279C601A17MP 279C601A18 279C601A19 1C08026A01 W9NCBNJM13 1C08026A09 279C601A22MP 279C601A23 4991C51A25MP 4991C51A26MP 5482C66A20 4991C51A02MP 4991C51A20MP 279C601A58 279C601A56MP 7191C90A55 1C08026A14 279C601A59

Eyebolt Terminal Connectors


with NEMA Brkt
279C602A03MP 279C602A04 279C602A05 279C602A06 279C602A10MP 279C602A11 279C602A12 4991C51A30 279C602A13 279C602A14 279C602A17MP 279C602A18 279C602A19 1C08026A03 1C08026A07MP 1C08026A11 4986C51A37MP 279C602A23 4991C51A34MP 4991C51A35MP 5482C66A22 4991C51A05MP 4991C51A38MP 4991C51A34MP 4986C51A31 7191C90A57 1C08026A16 4986C51A32

BIL (kV)
110 110 110 110 110 110 110 110 110 110 125 125 125 125 200 200 150 150 150 200 125 125 200 125 150 150 200 150

Current Rating (A)


100 100 200 200 100 100 200 200 200 300 100 100 200 200 100 100 100 100 100 100 100 100 100 300 100 100 100 300

Interrupting Rating (kA)


12 20 12 20 10 16 8 10 12 Disconnect 10 16 10 16 10 10 6 12 12 12 12 12 12 Disconnect 2 10 10 Disconnect

without NEMA Brkt


279C601A28MP 279C601A29 279C601A30 279C601A31 279C601A35MP 279C601A36 279C601A37 4991C51A24 279C601A38 279C601A39 279C601A42MP 279C601A43 279C601A44 1C08026A02 1C08026A06MP 1C08026A10 4986C51A35MP 279C601A48 4991C51A32MP 4991C51A33MP 5482C66A21 4991C51A04MP 4992C51A37MP 4986C51A58 4986C51A33 7191C90A56 1C08026A15 4986C51A59

without NEMA Brkt


4986C51A12MP 4986C51A20 5482C66A05 279C602A07 4986C51A11MP 4986C51A18 4991C51A31 5482C66A55 279C602A39 4986C51A21MP 5482C66A33 5482C66A58 1C08026A04 5482C66A35MP 4991C51A06MP 1C08026A25 1C08026A17 7191C90A48

Optional Cutout Parts


Replacement Fuseholder Caps
Style Number
162A775H01 162A775H03 3A09870G05 3A09870G01 3A09870G06 3A309870G02 3A09870G04 3872A21G01 161A292H04

Current Rating (A)


100 200 200 100 200 100 100 100 200

Cap Type
Solid Solid Link extender (only for 110 kV BIL unit) Link extender (only for 27 kV unit rated 125 or 150 kV BIL) Link extender (only for 15/27 kV unit rated 200 kV BIL) Link extender (only for 15 or 20/34.5 kV unit rated 200 kV BIL) Link extender (only for 27 kV unit rated 200 kV BIL) Expendable cap Expendable cap

-7-

Optional Cutout Parts continued on page 8

Optional Cutout Parts (cont'd)


Replacement Fuseholders
Voltage Rating (kV)
7.8/15 7.8/15 7.8/15 7.8/15 15 15 15 15 15 15 15/27 15/27 15/27 15/27 15/27 15/27 15/27 20/34.5 20/34.5 20/34.5 20/34.5 20/34.5 27 27 27 27 38 38 38 38

Style Number
279C606A03MP 279C606A04 279C606A05 279C606A06 279C606A10MP 279C606A11 279C606A12 279C606A30 279C606A13 279C606A14 279C606A17MP 279C606A18 279C606A19 279C606A48 279C606A21 279C606A49MP 279C606A50 279C606A22MP 279C606A23 279C606A31MP 279C606A32MP 279C606A21 279C606A53 279C606A25MP 279C606A35MP 279C606A21 279C606A40 279C606A54 279C606A56 279C606A21

BIL (kV)
110 110 110 110 110 110 110 110 110 110 125 or 150 125 or 150 125 or 150 125 or 150 125 or 150 200 200 150 150 150 200 150 125 or 150 125 or 150 200 125 or 150 150 150 200 150

Current Rating (A)


100 100 200 200 100 100 200 200 200 300 100 100 200 200 300 100 100 100 100 100 100 300 100 100 100 300 100 100 100 300

Interrupting Rating (kA)


12 20 12 20 10 16 8 10 12 10 16 10 16 10 10 6 12 12 12 12 12 12 2 10 10 -

Cap Type
Solid Expendable Solid Expendable Solid Expendable Solid Link extender Expendable Solid disconnect blade Solid cap Expendable Solid cap Link extender Solid disconnect blade Link extender Expendable Solid cap Expendable Link extender Link extender Solid disconnect blade Expendable Link extender Link extender Solid disconnect blade Solid Link extender Link extender Solid disconnect blade
1VAG271501-DB Rev. C November 2008 (replaces 38-651) Copyright 2006 ABB. All rights reserved.

Brackets
Style Number
367C723G05 403A101G03 367C802G05 791C890G16

Type
NEMA A NEMA B Extended Pole Mounting

ABB Inc. 406 Banner Ave. Greensboro, NC 27401 Tel: +1-336-275-7310 www.abb.com/mediumvoltage

Você também pode gostar