Escolar Documentos
Profissional Documentos
Cultura Documentos
2000F 1093C
UP TO 1100F (593C)
UP TO 2000F (1093C)
Table of Contents
Page 1 to 2 3 to 6 7 to 10 11 to 12 13 to 14 Contents Technical Information High Temperature Gloves and Mitts High Temperature Fire Entry, Kiln, Proximity, and Approach Suits; Hoods and Accessories Aluminized Safety Clothing High Temperature Safety Blankets and Curtains
Kevlar and Nomex are registered trademarks of E.I. duPont, Inc. PBI is a registered trademark of Celanese Corporation. Vortex is a registered trademark of Vortec Corporation. Velcro is a registered trademark of Velcro USA, Inc.
Zetex and ZetexPlus products are high temperature products designed for specific industrial and safety applications. The buyer should carefully consider the use for which Zetex and ZetexPlus products are purchased for. The buyer assumes all risk and liability associated with their use. Zetex and ZetexPlus products are warranted against defects and workmanship for 30 days.
UP TO 1100F (593C)
UP TO 2000F (1093C)
Temperature Rise
30
20
10
50
ZetexPlus fabric can withstand temperatures of up to 2000F (1093C) and resists burn-through by a continuous flame. In this test, the temperature of the fabric on opposite side of flame is only 179F (82C) with a probe only 1 inch from flame.
Zetex and ZetexPlus fabrics meet or exceed one or more of the following specifications:
s
UL
Listed UL Listed
UL 723 Flame Spread is 0, Smoke Density is 0, Fuel Contributed is 0 US Coast Guard Spec No 164.009 US Military Spec MIL-C-20079 US Military Spec MIL-I-24244 and NRC 1.36 Spec European BS EN407 standards UBC 43-1, NFPA 252, and California State Fire Marshall
s s s
s s
Using a ZetexPlus double palm mitt, a worker can hold a 3.75 pound (1.7 Kg) pipe heated to 2000F (1093C) for up to 20 seconds.
UP TO 1100F (593C)
UP TO 2000F (1093C)
Functional fit; standard size fits most hands. Also have ladies size for smaller hands Choice of gloves, double palm gloves, mitts, double palm mitts, and overmitts. All mitts are reversible 3 standard lengths available: 11", 14" and 23" Durable cotton-backed 11 ounce wool liner sewn at fingertips Kevlar thread is double-stitched in all areas for strength and durability Use leather, Kevlar, Blended Kevlar or PBI/Kevlar palms for abrasion and cut resistant uses Use Aluminized Zetex for radiant heat protection Easy ordering and quick shipments Zetex and ZetexPlus gloves and mitts can be custom fabricated to your specifications Made in USA
APPLICATION GUIDE
Application
Zetex ZetexPlus Zetex & ZetexPlus with leather reinforced palm Page 5
Fabric Type
Zetex & ZetexPlus with Kevlar reinforced palm Page 5 Aluminized Zetex Aluminized Kevlar Aluminized Nomex Aluminized Rayon Page 6
Page 4 High Temperature up to 1100F (593C) up to 2000F (1093C) Low Temperature to -100F (-73C) High Abrasion Resistance up to 600 to 800F (316 to 427C) Cut Resistance up to 600 to 800F (316 to 427C) Radiant Heat Protection s
Page 4
s s s s s s s s s
UP TO 1100F (593C)
UP TO 2000F (1093C)
Zetex standard size gloves are available in 3 lengths: 11", 14", and 23". Also in smaller ladies size
ZetexPlus gloves are available in 11", 14" (shown), and 23" lengths. Also in ladies size
Zetex and ZetexPlus mitts are available with single or double palm. ZetexPlus 14" double palm mitt shown
Zetex double palm glove in 14" length. Also available in ZetexPlus fabric
Zetex and ZetexPlus gloves and mitts provide excellent protection for high temperature applications
GUIDE
ZETEX
Type
Hand pads come with Zetex fabric or Finger cots are shipped in package Zetex fabric with leather palm (shown) of 12
ZETEXPLUS
Lengths* 9" 11" 14" 23" s s s s s s s s s
Custom Fabrication
Available
Double Palm Standard Size Glove Reversible Double Palm Standard Size Mitt Standard Size Overmitt s
s s s s s
s s s s
*Metric length equivalents: 9" = 229mm; 11" = 279mm; 14" = 355mm; 23" = 584mm
UP TO 1100F (593C)
UP TO 2000F (1093C)
20
ZETEX
Seconds
15
ZETEX ZETEXPLUS
10
KEVLAR
Average Time (seconds) worker holds a 3.75 lb. (1.7 Kg) hot pipe
GUIDE
Type Zetex Glove with Kevlar, Blended Kevlar or PBI/Kevlar Palm Zetex Glove with Leather Palm ZetexPlus Glove with ZP Kevlar Palm ZetexPlus Glove with ZP PBI/Kevlar Palm Zetex Mitt with Kevlar, Blended Kevlar or PBI/Kevlar Palm Zetex Mitt with Leather Palm
Blended Kevlar glove available in 2 sizes and 2 lengths (shown in 14" length) Zetex 23" mitt with PBI/Kevlar palm
s s
s s
s s
s s
s s
s s
s s
s s
s s
s s
s s
s s
ZetexPlus Mitt with ZP Kevlar Palm ZetexPlus Mitt with ZP PBI/Kevlar Palm
s s s s
s s s s
s s s s
s s s s
Zetex and ZetexPlus products with leather and Kevlar reinforced palms provide excellent abrasion and cut protection. Maximum temperature range is 600 to 800F (316 to 427C)
5
UP TO 1100F (593C)
UP TO 2000F (1093C)
Aluminized Zetex gloves and mitts are made with metalized aluminum film bonded to durable Zetex fabric. They provide excellent insulation, flexibility, radiant heat protection, and resistance to delamination, cracking, and peeling. For high heat and reflective heat protection, use Aluminized Zetex glove or mitt with ZetexPlus palm
GUIDE
Type
FAA approved glove: Aluminized Kevlar 14" glove with leather palm, vapor barrier, gauntlet style. Also available in knit-wrist style (shown at right)
Zetex All Aluminized Glove Zetex All Aluminized Mitt Aluminized Zetex Glove with Zetex Palm Aluminized Zetex Glove with ZetexPlus Palm Aluminized Zetex Mitt with Zetex Palm Aluminized Zetex Mitt with ZetexPlus Palm
s s s s
s s s s
s s s s
s s s s
s s s s s s s s
Aluminized PBI/Kevlar (left) and Aluminized Zetex (right) 14" glove with leather palm, gauntlet style. Also available in Aluminized Nomex , Kevlar, and Rayon. Knit-wrist style available
FAA Approved Glove: Aluminized Kevlar with leather palm, vapor barrier, gauntlet style or knit-wrist style Aluminized Zetex glove with leather palm. Also available with Aluminized PBI/Kevlar, Nomex, Kevlar, and Rayon
s
6
UP TO 1100F (593C)
UP TO 2000F (1093C)
HIGH TEMPERATURE PROTECTIVE SUITS 3000 Series Fire Entry Suit 2000 Series Fire Entry Suit
Newtex technology has developed a complete line of high temperature protective suits.
These protective suits meet the most demanding requirements for high temperature applications. They are available as complete suit (hood, coat, pants, boots, gloves or mitts) or as individual items. ALWAYS have 2 people suited with fire entry, kiln, and proximity suits to work in relays and aid each other.
3000 Series Fire Entry Suit Description: Aluminized Zetex plus 7 more layers of insulation for maximum heat protection and radiant heat protection. Breathing apparatus required. Hood: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built-in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated lenses for thermal protection. Coat: Designed to be worn with breathing apparatus. Double storm fly front. Flame seal with drawstring at coat bottom. Pants: High waist design. 2 inch wide adjustable suspenders. Adjustable straps on leg bottoms. Boots: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. All straps and bindings are ZetexPlus. Mitts: Heavyweight construction made with ZetexPlus fabric. Weight: 54 pounds (25 kg). Application: Use where high heat protection and radiant heat protection is needed. Designed for short duration ambient heat 1500F (815C), radiant heat to 3000F (1650C), and total flame 2000F (1093C).
2000 Series Fire Entry Suit Description: ZetexPlus fabric plus 7 more layers of insulation for maximum heat protection. Breathing apparatus required. Hood: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built-in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated lenses for thermal protection. Coat: Designed to be worn with breathing apparatus. Double storm fly front. Flame seal with drawstring at coat bottom. Pants: High waist design. 2 inch wide adjustable suspenders. Adjustable straps on leg bottoms. Boots: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. All straps and bindings are ZetexPlus. Mitts: Heavyweight construction made with ZetexPlus fabric. Weight: 48 pounds (22 kg). Application: Use where high heat protection is needed. Designed for short duration ambient heat 1500F (815C), radiant heat to 2500F (1371C), and total flame 2000F (1093C).
SAFETY FIRST
HIGH TEMPERATURE PROTECTIVE SUITS 850 Series Kiln Suit ~ 750 Series Proximity Suit ~ 150/550 Series Approach Suit
850 Series Kiln Suit Description: Highly insulated suit with Aluminized Zetex fabric outer shell and internal vapor barrier. Breathing apparatus required. Hood: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built-in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated lenses for thermal protection. Coat: Designed to be worn with breathing apparatus. Double storm fly front. Flame seal drawstring at coat bottom. Pants: High waist design. 2 inch wide adjustable suspenders. Adjustable straps at leg bottoms. Boots: Designed to fit over work shoes. Heavy insulated upper boot cover with zipper and storm fly. Adjustable tightening straps. 1 inch wooden sole with anti-skid bottoms. Inside leather toe and ankle adjustable straps. ZetexPlus binding. Mitts: ZetexPlus palm and thumb. Aluminized back and cuff. Applications: Used for maintenance and repair applications.
750 Series Proximity Suit Description: Insulated suit with Aluminized Zetex fabric outer shell and double vapor barrier. Breathing apparatus recommended. Hood: Full shoulder length drape. Adjustable underarm straps. Built-in shell for structural support. Hard cap with ratchet adjustment. Speedy clip for hard cap support. 6" by 91/4" gold window and aluminum retainer. Two side wing locks for holding lens and retainer in place. Coat: Available with or without breathing apparatus accommodation. Double storm fly front. Flame seal with drawstring at coat bottom. Pants: High waist design. 2 inch wide adjustable suspenders. Adjustable straps on leg bottoms. Boots: Designed to fit over work shoes. Leather insulated soles. Adjustable tightening straps. ZetexPlus binding. Mitts: ZetexPlus palm and thumb. Aluminized back and cuff. Applications: Used for maintenance and repair applications where there is steam or volatile materials present.
SAFETY FIRST
Ambient Temperature Application Guideline
Short time period durations
150 Series/550 Series Approach Suit Description: 150 Series: non-insulated suit with Aluminized Zetex outer shell plus a flame retardant cotton lining for extra comfort and protection. 550 Series: Same as 150 Series except with a vapor barrier lining of flame retardant neoprene coated FR poly-cotton. Aluminized Kevlar, Nomex, or PBI/Kevlar are also available as outer shell fabrics. Wool or quilted Nomex linings are available. Hood: Designed like proximity hood with built-in shell for structural support. Hard cap with ratchet adjustment. Speedy clip for hard cap support. Full length drape is not insulated. Coat: Tailored sleeves with snap adjustment. Covered front snaps. Available with or without breathing apparatus accommodation. Pants: High waist design. 8 point all elastic adjustable suspenders. Snapped triangular storm fly front. Snap adjustment on leg bottoms. Boots: Designed to fit over work shoes. Leather soles and heels. Adjustment tightening straps. Gloves: Gauntlet style with leather palms. S.E.F. lining in fingers. Applications: Industrial and factory applications where temperatures do not exceed 200F (93C).
Type of Protective Suit 150 Series and 550 Series 150 Series with quilted Nomex or Wool liner 550 Series with quilted Nomex or Wool liner 350 to 550 177 to 288 750 Series 550 to 800 288 to 427 850 Series All Zetex Aluminized Protective Suits can withstand radiant heat up to 2000F (1093C)
Degrees C up to 93 93 to 177
Vortex cooling system designed for high temperature applications to keep worker comfortable
Nomex hood
Aluminized Zetex approach hood with headgear and mesh window FABRIC OPTIONS: Aluminized Zetex, Aluminized Kevlar, Aluminized Nomex, Aluminized PBI/Kevlar, & Aluminized Rayon
10
A wide range of sizes of pants (S, M, L, XL, 2XL, 3XL) are available. Standard features include storm-fly front and suspenders.
For radiant heat protection, use Aluminized Zetex 600 fabric. For molten metal splash protection, use Aluminized Zetex 800 fabric
FABRIC OPTIONS Newtex offers a wide choice of aluminized fabrics to order: Aluminized Zetex, Aluminized Kevlar, Aluminized Nomex, Aluminized PBI/Kevlar, & Aluminized Rayon
12
UP TO 1100F (593C)
UP TO 2000F (1093C)
ZetexPlus
Newtex makes a wide variety of fabrics for safety blanket and curtain applications. Standard roll widths are 40 inch (1m), 60 inch (1.5m) and 72 inch (1.8m); roll length is 50 yards
UP TO 1100F (593C)
UP TO 2000F (1093C)
Call or visit our web site for technical information and customer service.
SAFETY FIRST
UP TO 1100F (593C)
UP TO 2000F (1093C)
Zetex and ZetexPlus fabrics meet or exceed one or more of the following specifications:
s
UL
Listed UL Listed
UL 723 Flame Spread is 0, Smoke Density is 0, Fuel Contributed is 0 US Coast Guard Spec No 164.009 US Military Spec MIL-C-20079 US Military Spec MIL-I-24244 and NRC 1.36 Spec European BS EN407 standards UBC 43-1, NFPA 252, and California State Fire Marshall
s s s
s s
Newtex makes a complete line of high temperature products for industrial applications. Call us for the Industrial Products Catalog or visit our web site.
Newtex Industries is a leading integrated manufacturer of high-tech, heat resistant products for industrial and safety markets. Newtex products, under the Zetex and ZetexPlus brand names, include: heat resistant fabrics, welding fabrics, tapes, ropes, tubings, high temperature belting, and mat; fire entry, kiln, proximity, and approach suits; gloves, and mitts; aluminized safety clothing; and theater curtains. Newtex distributes its products to more than 60 countries.
Headquarters: 8050 Victor-Mendon Road, Victor, NY 14564 USA Tel: 800/836-1001 Fax: 716/924-4645 E-mail: sales@newtex.com Internet: www.newtex.com Western U.S. Office and Distribution Center: 34016 Ninth Avenue South, Building D, Suite 3, Federal Way, WA 98003 Tel: 888/NEWTEX 1 Fax: 253/838-5603 Asia/Pacific Office and Distribution Center: Newtex Asia Pacific PTE LTD BLK 120 Richfield Industrial Centre 01-03 Eunos Ave 7, Singapore 409574 Tel: 65-7481138 Fax: 65-7480848 E-mail: thintern@mbox4.singnet.com.sg
Newtex, Zetex, and ZetexPlus are registered trademarks of Newtex Industries, Inc. Z-Sil and Z-Shield are trademarks of Newtex Industries, Inc.
Made In USA
11/99