Escolar Documentos
Profissional Documentos
Cultura Documentos
07
03
Embedded ideas
Search
New Products
LED Drivers for LCD Backlights TV Encoders with Built-in AIE High Brightness LED Numerical Displays High Heat Dissipation White LEDs for Illumination Ultra-compact Multi-diode Packages Thin, Compact Tantalum Capacitors Low ON-resistance Power MOSFETs CMOS LDO Regulators for Portables Three-channel Programmable Clock Generators I2C Bus Serial EEPROMs High Precision Detection Illumination Sensor ICs 7V H-bridge Drivers (Single Channel Type) Thermal Printheads with Protective Ultra-low Friction Film Wireless Audio Link ICs 0402-size Chip Resistors Optical Surface Mount Four-way Detection Sensors High Voltage Resistance AC/DC Converter Modules Ultra-compact Tantalum Capacitors
Clear, precise video signals for colorful, high resolution image generation on large screens.
High definition video reproduction with no deterioration, even with 20m HDMI cables.
OVER STORY
Clear, precise video signals for colorful, high resolution image generation on large screens.
High definition video reproduction with no deterioration, even with 20m HDMI cables.
Notebook PCs HD movie cameras HDD recorders Games
Input Waveform
Output Waveform
1080p Full HD, compatible with RGB 12-bit color depth HDMI Ver. 1.3a compliant, 2.25Gbps high speed transmission Built-in equalizer ensures support for long cables (20m) Stable HDCP communication with built-in DDC buffer for easy compliance 10kV+ ESD resistance (HBM)
COVER STOR
INPUT1
DDC L/S
Rx AMP with EQ
DDC L/S
INPUT2
Rx AMP with EQ
Control Logic
OUTPUT
Tx Driver
DDC L/S
Rx AMP with EQ
DDC L/S
INPUT3
Switching Format
DDC Buffer
Equalizer
Deemphasis Output
4 to 1 Switch
BU16020KV
3.0 to 3.6
10
2.7
Yes
Yes,
coupled with HPD_SINK
GPIO I2 C GPIO
Yes
(with built-in EDID RAM)
Yes
Yes
<14 x14mm>
BU16018KV
3 to 1 Switch
3.0 to 3.6
10
2.25
Yes
Yes,
coupled with HPD_SINK
Yes
Yes
Yes
<12 x12mm>
VQFP80
BU16027KV
3.0 to 3.6
10
2.25
Yes
Yes,
not coupled with HPD_SINK
GPIO
Yes
Yes
Yes
Always ON
BU16028KV
2 to 1 Switch 1 to 1 Buffer
3.0 to 3.6
10
2.25
Yes
Yes,
coupled with HPD_SINK
GPIO
Yes
Yes
Yes
Always ON
VQFP64
<10 x10mm>
BU16006KV
3.0 to 3.6
10
2.25
Yes
Yes,
coupled with HPD_SINK
GPIO
Yes
Yes
Yes
Always ON
BU16024KV
Under Development
3.0 to 3.6
10
2.25
Yes
Yes,
coupled with HPD_SINK
Yes
Yes
Yes
VQFP48
<8 x8mm>
ECOMOS series
ROHMs ECOMOS is a power MOSFET specifically designed for use in the power circuits of portable devices. Special emphasis was made to reduce power consumption by significantly reducing ON-resistance during operation for longer battery life. Every effort was made to minimize environmental impact, including the use of halogen-free resins.
ON-resistance
1.5V Drive
Drive Voltage
ECOMOS Lineup
Package mm
1.21.20.5 1.61.60.7 1.61.60.5
Part No. RUM003N02 RUE003N02 EM6K6 RUF015N02 RUF025N02 RZF030P01 RUL035N02 RZL035P01 US6K4 RUR040N02 RZR040P01 RUQ050N02 RZQ050P01 RQ1A070ZP QS8J1 RT1A050ZP TT8J1 TT8U1 ES6U41 ES6U42
V DSS (V) 20 20 20 20 20 12 20 12 20 20 12 20 12 12 12 12 12 20 30 20
I D (A) 0.3 0.3 0.3 1.5 2.5 3 3.5 3.5 1.5 4 4 5 5 7 4.5 5 2.5 2.4 1.5 1
VMT3
V GS =4.5V 2 0.7
2 0.7 0.7 2
EMT3 EMT6
2.02.10.77
TUMT3
80 72 66 66
1 220
2.02.10.77
TUMT6
Nch 1 Pch Nch+Nch Nch Pch Nch Pch Pch Pch+Pch Pch Pch+Pch Pch+SBD Nch+SBD Pch+SBD
2.92.80.85
TSMT3 TSMT6
1 1.25
2.92.80.85
3.02.80.8
TSMT8
1.5
3.01.90.8
TSST8
1.25
1.61.60.6
WEMT6
0.7
3.02.80.8
TSMT8
TSMT6
ON-resistance Reduced 77% Mounting Area 30% Smaller Height 20% Less
3.01.90.8
TSST8
At ROHM we are involved in minimizing MOSFET voltages as much as possible, presently to 1.2V and 1V. In addition, continual progress is being made in the development of SiC (Silicon Carbide) MOSFETs featuring dramatically lower ON-resistance and increased voltage resistance.
2.02.10.85
TUMT6
1.61.60.6
WEMT6
A broad lineup of eco-devices, besides ECOMOS, that contribute to reduced power consumption can be found on our website. www.rohm.com/ecodevices/
Energy Saving
ECO Devices
Product information
Power Products
Audio-related Products
New Products
Optimize screen brightness Double-dimming system significantly reduces energy consumption
6-2 LED drivers for LCD backlights
Product Code
High heat dissipation package decreases thermal resistance and increases luminance by 25%
High heat dissipation white LED for illumination
Product Code
07
04
01
The BD6095GU/ GUL LED drivers for LCD backlights ensures optimal picture display with minimal energy consumption. A dual-dimming system is employed that varies the brightness not only based on ambient conditions but according to the brightness of the content being displayed as well. The result? Maximum visibility with low power consumption.
The PSML2 package white LEDs for illumination feature an industry-best 7cd brightness in the mid-current range (100mA). Heat dissipation has been greatly improved through utilization of an exposed copper frame with high heat conductivity. The result is a heat dissipation of 60C/W when mounted on an FR-4 substrate, increasing luminance and heat resistance 25% over conventional products.
The RSS, SP8K6, SP8J6, and SP8M6 series represent new additions to ROHM s expansive MOSFET lineup. Designed for lower ON-resistance (Nch/Pch: 20%/40% lower) and featuring a wide current range (Nch: 7-18A, Pch: 4-14A), they are ideal for a wide range of applications, including DC/DC converters, motor drives, inverters, and load switches.
02
05
08
The BU6520KV TV encoder with built-in AIE (Adaptive Image Enhancer) for hardwarebased image correction is compatible with standard CCIR601/656 video input and was designed for simple replacement of conventional TV encoder ICs. Bright and dark areas are individually corrected for optimized visibility. And the capability to automatically download AIE/TV encoder settings from an external EEPROM allows use without a microcontroller.
Two PIN diode package arrays are now available HMD8, featuring 8 pins, for up to 4 chips, and HMD12, with 12 pins and up to 6 elements. Employing a unique chip device structure and ultra-precision machining technology makes it possible to arrange different types of diode chips and wiring configurations in a single package, resulting in greater design flexibility.
The BUTA2WNVX series of CMOS LDO regulators for portable devices were designed to deliver stable voltage, even with high load currents. Memory or logic ICs that perform reading, writing, and processing of data based on an operation clock require high load currents when writing data. ROHM utilizes a full CMOS process and optimized high-speed amplifier, resulting in 5 times the load response of conventional products.
03
The LAP/LBP series of LED numerical displays utilizes unique four-element high brightness LEDs, resulting in ten times the brightness of conventional displays (orange light emission ratio) with virtually no luminosity deterioration over a long period, even during continuous use. Restricting current to 1/10th the rated value makes the brightness equivalent to conventional displays, contributing to reduced power consumption. Ideal for a variety of applications, including FA devices, e n t e r t a i n m e n t equipment, and the like.
Three clocks on a single chip Reduces the number of components and saves space
Three-channel programmable clock generator
Product Code
06
09
A new high voltage resistance (35V) model has been added to the venerable TCTAL series of thin (1.1mm), compact 3216-sized tantalum capacitors optimized for noise suppression in power source circuits for LCD modules, organic EL modules, and other high drive voltage applications requiring a high performance, low profile solution. The entire lineup is halogen-free, lessening the impact on the environment.
The BU7331EKN clock generator integrates three different clocks on a single chip. Various clock settings can be programmed via serial interface, and high-precision clock setting is possible for simultaneous output. The result is less frequency interference between clocks, fewer external components, and smaller mounting area.
New Products
Ideal for device position detection Reflow-compatible surface-mount package
Optical surface mount fourway detection sensor
Product Code
10
First anti-stick printhead in the industry* Increased abrasion life and print quality
Ultra-low friction thermal printheads
Product Code
16
The BR24S series of I 2C bus serial EEPROMs feature high-speed operation (>400kHz) over the entire operating voltage range (1.7V to 5.5V). Compatibility with the global standard I 2 C bus interface enables complete control using two ports, a serial clock (SCL) and a serial data (SDA) line. High reliability is ensured through a unique doublecell structure for redundant operation, a builtin double-reset function, and gold pads and wires.
13
The SE-DC94A series of thermal printheads feature an ultra-low-friction protective film specifically designed to mitigate adhesion (sticking phenomenon) between the printhead and recording media, resulting in less abrasion and longer life. A unique step-free structure is also utilized for improved contact, greater reliability, and superior image quality.
(* Based on a June 2008 ROHM study)
The RPI-1031, a new surface mount optical four-way detection sensor, is neither susceptible to vibration nor magnetic fields, making it superior to both mechanical and magnetic sensors. It is ultra-compact (3.9mm square) and ultra-light (67mg), enabling mounting in a variety of devices.
17
11
A high-precision detection type brightness sensor has been developed that integrates a dimming function with spectral sensitivity close to the human eye for reduced power consumption and greater visibility. Unique laser trimming technology enables high-precision light adjustment, resulting in a light sensitivity tolerance of 15%. The lineup includes the BH1603FVC, an easy-to-use analog type sensor with excellent linearity characteristics between current and brightness, and the BH1715FVC, a digital type model that simplifies connection to digital I 2C bus systems.
14
The RDS-compatible BU2682MUV is the newest addition to ROHMs extensive lineup of markettested wireless audio link ICs for high quality FM audio transmission. RDS capability makes 11 it easy to send text information to an existing FM receiver, such as song titles and artist names. Both RDS and RBDS functionality are built in for compatibility in Europe and the US.
The BP5055-12 is a new high voltage resistance AC/DC converter featuring a wide input voltage range, from 240V to 600VDC (AC conversion: 170V to 425V). It provides ample freedom of design for regions with unstable power sources. 77% efficiency has been achieved through the use of a switching power source. And its transformerless configuration makes it both compact and lightweight, while the negative output ensures compatibility with TRIAC devices.
Product Code
18
Power consumption reduced 40% Low consumption PWM drive with new VREF input
7V H-bridge driver (Single channel type)
Product Code
The worlds smallest class (0402 size) High dimensional precision for stable mounting
0402-sized chip resistors
Product Code
15
12
The new BD621 series of H-bridge drivers integrate a VREF-PWM duty conversion circuit that converts the input voltage to PWM, resulting in high efficiency and low power consumption. A diode is also built in for surge absorption.
The new MCR004 series of chip resistors are offered in the 0402 size, making them among the smallest in the industry 56% smaller and 72% lighter than conventional 0603-sized products. In addition, high external dimensional precision (20m) has been achieved through microfine processing technology, simplifying installation. The entire series is also halogenfree, lessening the impact on the environment.
The TCTU series of tantalum capacitors, available in the 1005 size, is optimized to suppress coupling and noise in audio and power supply circuits while eliminating the ringing and capacitance drops prevalent with ceramic capacitors. Capacitance ranges from 1.0F to 4.7F, with further expansion planned. In addition, all products are halogenfree, reducing the impact on the environment.
www.rohm.com/ei
or
www.rohm.com/ei/03
Enter the Product Code in the box
For 01 www.rohm.com/ei/0301
www.rohm.com/products/lsi/motor/h_bridge/
ROHM H-bridge
Sorting is possible based on voltage resistance, output current, number of channels, package type, and surface area. Find the optimum product from our extensive lineup.
Product Page
Package
Viewable in PDF format
Cross Reference
Constituent Materials List
Viewable in PDF format
Cross-reference ROHMs extensive database for suitable products
Order samples
ROHM has a special page for sample ordering