Escolar Documentos
Profissional Documentos
Cultura Documentos
TO BE SUBMITTED FOR THE PARTIAL FULFILLMENT FOR THE AWARD OF THE DEGREE OF BACHELOR OF BUSINESS ADMINISTRATION (BBA)
UNDER THE GUIDANCE OF: MS.MANMEET KAUR (FACULTY OF CENTRAL DELHI CENTRE, NEW DELHI)
SUBMITTED TO: JAMIA HAMDARD UNIVERSITY THROUGH CENTER CODE: 1003 CENTRAL DELHI CENTER
CERTIFICATE
This is to certify that the thesis titled Training And Development(Organization: National Thermal Power corporation) is prepared and submitted by Ms. NEHA VATS to Jamia Hamdard, New Delhi in partial fulfillment for the award of the Bachelor Degree in Business Administration.
PREFACE
It is a great privilege to me to place this report before the reader. The report is concerned about Training and Development (Organization: National Thermal Power corporation) .this report is presented in a very simple and understandable language on the basis of primary data. Lastly I would like to state that although every possible care has been taken to make this report error free but still the possibility of some error keeping inadvertently cannot be ruled out. I shall be feeling highly obliged to all the readers if some are brought to my notice. Critical evaluation welcome and shall be gratefully acknowledged sincerely express my gratefulness to all those who directly or indirectly, helped me in this project. I firmly believe that there is always scope for improving and accordingly I shall look forward for welcome suggestions in this direction from all the readers and subject spiel which shall be thankfully acknowledged.
ACKNOWLEDGEMENT
The present work is an effort to throw some light onTraining And Development(Organization: National Thermal Power corporation) The work would not have been possible to come to the present shape without the guidance, supervision and help to me by number of people.
With deep sense of gratitude I acknowledge the encouragement and guidance received by Jamia Hamdard, New Delhi. I also convey my heartfelt affection to Ms.Manmeet Kaur who helped and supported me during the course, for completion of my thesis.
NEHA VATS
ENROLLMENT NO: ODL\09\403\026
EXECUTIVE SUMMARY
National Thermal Power Corporation (NTPC) has emerged as a truly national power company, with power generating facilities in all the major regions of the country. NTPC is committed to the environment, generating power at minimal environmental cost and presenting the ecology in the vicinity of the plants. It has 17 power generating plants which contribute to 25% of total power supply in India. NTPC is ranked 3rd in India for employee satisfaction.
Global competition technological advancement and transformation of the traditional workplace are raising the pressure on all organizations to improve performance. Training and development are the most frequently employed organizational strategy to enhance organizational ability to adopt and use advances in technology because of highly capable and knowledgeable employees continuous training & development of employees is crucial in enhancing organizations competitive position and improve employee morale, teamwork, problem solving and decision making capabilities. This has persuaded many organization to form separate training department. NTPC too believes in this approach towards perfection but consistent.
NTPC is involved in a variety of innovative training & development techniques So as to make NTPC a learning organization
TABLE OF CONTENT
S. No. 1. Topics Introduction The Organization NTPC a.Ntpc power station b.Organisational charts c.Power management institutes Problem Undertaken Objective of Our Study Training & Development - Theoretical Perspective Research Methodology Data Presentation Data Analysis Conclusions Recommendations Bibliography Annexure Questionnaire Page No. 7
INTRODUCTION
10
ORGANIZATION CHART
11
12
VISION
NTPC, a front-runner in the Indian power sector, to be one of the largest and best power utilities of the world and thereby contributing to Indias emergence as one of the worlds leading economies. NTPCs vision for the new millennium is inspired by a glorious past, vibrant present and a brilliant future.
MISSION
To make available reliable and quality power to the nation in increasingly large quantities. Towards this end, the company will spearhead the process of accelerated development of the power sector by planning and expeditiously implementing power projects and operating power stations economically and efficiently. In doing so the company will also seek opportunities for augmenting power generation through tieups with other organizations in the area of conventional energy sources and additionally through non- conventional energy sources. The corporation will contribute to all round sector improvement by sharing its expertise and experience with other organizations. The company will participate in the setting up of the power projects abroad, if necessary in collaborations with other reputed organizations.
OBJECTIVES
In pursuance of the vision and mission, the following would be the corporate objectives of NTPC:
13
GROWTH
To add generating capacity within prescribed time and cost; To expand consultancy operations and to participate in ventures abroad; To diversify in hydro and non-conventional energy sources power generation; To diversify into power related businesses to ensure integrated development of energy sector in India.
PERFORMANCE LEADERSHIP
To achieve continuous performance improvement in the areas of project implementation, plant operation and maintenance, generation efficiency etc. and to acquire and sustain internationally comparable standards in these areas with good business ethics and values.
FINANCIAL SOUNDNESS
To maintain and improve the financial soundness of NTPC by managing the financial resources in accordance with the best commercial utility practices.
To develop appropriate commercial policies which ensure remunerative tariffs and minimum receivables.
TECHNOLOGY LEADERSHIP
To acquire, assimilate and adopt reliable, efficient and cost- effective technologies and to disseminate knowledge to other constituents of the power sector in the country.
14
To carry out research and development for efficient and reliable operation of power plants in the country.
VALUES
The values shared by the entire organization are to permeate through each and every discipline within the company and in all its initiatives and responses with the rest of the world: Respect for each other Every one a winner Fairness, business ethics Customer satisfaction Vendor partnership Efficiency, profitability benefit cost orientation Systems approach and discipline Innovation, creativity, entrepreneurship Concern for ecology, environment Internal customer service Total quality Sensitivity to feedback, learning and renewal.
15
GROWTH
In a span of just over 15 years after commissioning of the first 200 MW unit at Singrauli in February 1982, NTPC has grown to become the largest utility of the country with the commissioned capacity of 16,975 MW at an average annual commissioning rate of 1000 MW. NTPC has been ranked ninth in thermal generation amongst the worlds thermal generating companies as per the bench-marking data of 200 top utilities of the world (published by Marketline International UK). The total approved capacity of NTPC at the end of the March 2011 stands at 20,515 MW consisting of 12 coal based stations and7 gas/ liquid fuel based stations. In addition, NTPC also manages Badarpur thermal power station and Balco captive power plant on behalf of the government of India and Bharat Aluminium Corporation limited (BALCO) respectively.
Market share
Indias current installed power generation capacity as on 30 th June, 2010 is at1,50,324 MW as against 89,103 MW during 1997-98 and 1,32,329 MW at the end of March,2011. In addition to this, the captive power capacity has been pegged at over 24,000 MW at present.
16
DIAGNOSIS
Looking back, it has not exactly been an absolutely smooth sailing all the way for NTPC. Till the late eighties, the central government provided budgetary support through equity contributions and mobilizations of multilateral and bilateral debt at relatively favorable terms and loan guarantees, allowing NTPC to plough back all its earnings, thereby providing it with an important source of long-term capital. The government also supported NTPC in the realization of dues through central appropriations. In the liberalized economic scenario, the announcement of a new power policy in October 1991 marked a significant change in the governments priorities. There have been successive policy announcements to facilitate greater private sector participation. With the opening up of power sector to private participation, as many as three project sites under development by NTPC were transferred to the respective state governments for implementations by the IPPs as: The government wanted to encourage private participation; NTPC, during the years 1989-92, was facing a severe financial crunch caused by huge arrears of SEBs coupled with withdrawal of net budgetary support by the government; Denial by the multilateral funding agencies like the World Bank to support new NTPC projects, while continuing the funding of ongoing projects. This was a turning point in the history of NTPC: a make or break situation that would determine the survival of the company and the future role it expected to have in the power sector of the country. Strategies and approaches had to be quickly evolved, to move from financial crisis to good health, and this was achieved in large part because of the judicious mix of sound commercial policies adopted in resolving the crisis with the support of the government. The steps taken included: Offering new incentives to encourage prompt payment through LCs by SEBs; Strengthening the commercial department of NTPC; Intensive liaison with the customer/ state governments; Central government support, including central appropriations, and
17
Resorting to regulation of power supply commensurate with payments, wherever needed and feasible.
The result was dramatic improvement in the realization of dues, and revival of the World Bank loans under the time slice concept by 1993. Soon, other lending agencies followed suit. Thus between 1989 and 1997, NTPC went through three distinct phases of first having projects but no money (1989-1992), having money but no new projects to implement (1995 onwards). Today, NTPC is well pois3ed to implement an ambitious growth plan of becoming a 30000 MW plus company by the year 2011.
18
MARKET SHARE
+ The government has reposed its confidence in NTPC by selecting it to be one of the eleven PSUs having a potential to become a global giant. This privilege provides significant leverage to NTPC in realizing its vision. + With a share of 18.8% in installed capacity and 25.3% in generation contribution, NTPC is not only the largest and leading power generating company in the country but has also acclaimed international reputation. + Poised to become a 30000 MW plus company by the end of Xth plan i.e. year 2011. + High credibility due to transparency in dealings.
PAST PERFORMANCE
+ An impressive growth rate in capacity addition, unmatched in the history of power sector in India. +An excellent record of project implementation by commissioning most of the units on or ahead of schedule. +Achieved new performance benchmarks in operational and efficiency parameters. +Achieved self-sufficiency in engineering of coal and gas based power stations. +Brought impressive turnaround in performance of the stations taken over from SEBs and managed by NTPC.
+Maintained continuously its performance under excellent rating in MOUs with
government for the last 11 years. +Won several prestigious awards for excellent performance in various areas of productivity, environment, industrial relations, safety, family welfare, quality Delays in declaration of commercial operation of some of its units.
19
- Large inventory of high values, non/ slow moving squares has been accumulated over the years. - Delays in contract closings after the completion of the projects. -The state owned monopolistic nature of power industry with inadequate focus on service to customers.
FINANCIAL POSITION
+ High credit rating as evident from confidence reposed in NTPC by multilateral financial institutions like world bank, ADB, OECB and KFW. + Increasing profits year after year since inception. + Substantial internal resource generation for growth. - Very large receivables from state electricity boards. - Low return on investment due to administered tariff.
HUMAN RESOURCES
+ Pool of skilled and dedicated professionals in engineering, operations, maintenance, contracts, R&D, finance and human resource management, etc. + Continued concern for human resource development. Established power management institute equipped with necessary infrastructure backed by training institutes at all projects to upgrade the technical and managerial skill.
TECHNOLOGY
+ Full fledged engineering division accredited with ISO 9001 certification. + Pioneered several state-of-the art technologies viz. DDCMIS, HVDC etc. in the Indian power sector. NTPC was also the first to introduce combined cycle power generation in India. + Established a full-fledged R&D center equipped with state-of-the-art equipment for
20
carrying out applied research in power technology. The R&D center supports the sustenance of high-level operational performance.
ORGANIZATION STRUCTURE
+ Three-tier structure provides decentralization of line responsibility while retaining centralized systems in areas such as engineering, contracting of high value packages, co-ordination with financing agencies etc. - Tall hierarchy for controlling and directing - Role ambiguity has started creeping in.
21
+ Cordial management employees relationship. - Too many to take credit for successes and too few accountable for failures. This may put blinkers in the managers perceptions as they become insulated from the environment and instead of trying innovative approaches; they may stick to what has worked in the past. This may tend to maintain status quo. - Lack of information sharing tendency.
22
ENTIRE GAMUT OF SERVICES, IN THE ABOVE AREAS, ARE OFFERED SUCH AS: Owner's Engineer Services. Lender's Engineer Services. Environment Engineering and Management. Procurement Services. Project Management. Quality Assurance and Inspection Services. Materials Management. Construction Management, Erection and Commissioning. Financial Systems and Modeling. Operation and Maintenance. Restoration, Efficiency Improvement and Renovation and Modernization. HRD and Training. Research and Development. Information Technology. Management Consultancy.
23
128 MW (8x16 MW) Diesel based Power Station at Kozhikode, Kerala for Kerala State Electricity Board India. 3x210 MW Baleshwar Power Project of West Bengal Power Development Corporation Ltd, India.
TURNKEY EXECUTION
Turnkey Execution of projects including Design, Supply Construction, Testing and Commissioning of: Seventh Power Project of Nepal S and Hatta for Dubai Electricity and Water Authority; Dubai. 400/ 132 KV Transmission System for Dubai Electricity and Water Authority; Dubai.
24
Efficiency Improvement of TNEB for Asian Development Bank, Manila, Philippines. 450 MW Mchuchuma Mining-cum-Power Project for National Development Corporation, Tanzania. 300 MW Pragati Combined Cycle Power Project for Delhi Vidyut Board, India. 600 MW Gas based Combined Cycle Power Project at Vypeen, Kerala for Siasin Energy Pvt Ltd, India. Tamil Nadu Industries Captive Power Company Ltd, India. 300 MW Combined Cycle Power Project at Hazira (on behalf of ONGC-NTPC Joint Venture). 500 MW Thermal Power Project at Tuticorin for TNEB, India. 2000 MW Combined Cycle Power Project at Vembar for IIPL, India. National Aids Control Project of Ministry of Health and Family Welfare funded by World Bank.
25
Qualified Manpower
NTPC has a vast Pool of qualified technical and managerial manpower who are well supported by highly trained staff and excellent infrastructure facilities to extend
26
Experience
of
working
with
International
Consultants
NTPC engineers have had the opportunity of working in close association with several international consultants viz. Black and Veatch Intl., USA; UE & C, USA; British Electricity International, U.K.; Electricite de France, France; Gilbert Commonwealth, USA and many more.
NTPC has the capability and expertise to provide the total range of services from Concept to Commissioning of power station covering areas such as feasibility & EIA studies, design, engineering, QA&I, procurement, project management, construction supervision, testing, commissioning, operation & maintenance and training etc.
NTPC is registered as a consultant with World Bank, Asian Development Bank, African Development Bank, etc.
27
28
29
INTRODUCTION
The Power Management Institute (PMI) was set up by National Thermal Power Corporation in recognition of the vital role that training and development has to play in the context of the challenges associated with the growth of the Indian Power Sector. The Institute set up in the year 1982, is involved in the training and development of middle and senior level personnel from the power sector as also from other organizations not related to power sector. PMI started functioning from the sprawling campus at sector 16, Noida. Over the years, PMI has developed its strength in designing and delivering customized programs suited to the needs of individual organizations. While the institutes core competence in technical areas is related to power sector, its Management and IT development programs cover all aspects of management development. The infrastructure and idyllic surroundings of PMI make it conducive to learning and self-development.
Overview
ISO-9001 certification:
PMI has secured the prestigious ISO-9001 certification from LLOYDS REGISTER QUALITY ASSURANCE (LRQA). The standard of training imparted has been adjudged to be of high quality as endorsed by certification.
Policy:
PMI is committed to be a leading institute in developing world-class competencies by providing state-of-the-art training catering to the needs of the power professionals. The institute shall endeavor to innovate and adopt latest management and technological practices to continuously improve the capabilities.
Objectives:
30
To increase training capacity utilization Continuous up-gradation of faculty competencies To develop strategic alliances for mutual improvement of core competencies To widen the customer base and achieve improved customer satisfaction To carry out benchmarking with national and international training institutes
TECHNICAL PROGRAMS
NTPC is operating a number of thermal power units, both coal and gas based, in various parts of the country. NTPC has also made its foray in the hydel sector. In all these years, NTPC has gained sufficient experience and expertise starting from design and construction to operation and maintenance of units. PMI serves as a platform for sharing a technical knowledge and experience in this field. It also offers an opportunity imbibing new technology as a result of R&D efforts as well as technological changes happening else where in the power sector.
31
INFORMATION TECHNOLOGY
In tune with the sweeping changes in the information era, the institute is organizing various IT programs taking into account the latest development and needs of the organization. ERP, managing IT, e-commerce, Internet and Intranet for business applications, etc related Java programming, web publishing are some of the programs in this area. A few IT programs addressing the emerging needs Microsoft Office 2000 upgrade Developing and Hosting a Website Managing Information Technology Microsoft Windows NT Core Technologies PC trouble-Shooting and maintenance Linux
SPECIAL PROGRAMS
The institute in collaboration with IIT, Delhi has introduced an 18 months M-tech program in Power Engineering. This program is open to all power engineers having minimum 7 years experience and less than 40 years of age. The selection is through a written test held all over the country and interview of the short-listed candidates.
32
Twenty-five candidates are finally selected. A few seats are reserved for candidates sponsored by external organizations. PMI has also taken the initiative of offering a degree course, B-Tech in Power Engineering in collaboration with BITS, Pilani to its employees having diploma in Engineering. The institute is also expanding its portfolio to include management education. Over the years PMI has been providing long duration induction level training programs to the new NTPC executive trainees. Also, organizations like Power finance Corporation, ABB, Reliance, BSES, Siemens, etc are sponsoring executive trainees to PMI for induction level courses.
Faculty Profile
Director (Personnel) NTPC is the Director-in-charge of PMI, which is headed by Executive director, PMI. A competent faculty pool drawn from various disciplines is the core strength of PMI. The areas include Organizational Behavior Human Resource Management Sociology Power Plant operation and maintenance Vigilance Mechanism Environment Engineering and Management Power Plant performance and efficiency monitoring Information Technology Financial Management Strategic Management Project Management Contracts and Materials Management Renovation and modernization Rehabilitation and settlement Energy conservation
33
administration, maintenance, hospitality, environmental management and a host of other support services. There is a learning resource center having over 8,500 titles of books and videotapes and also facilities for sports and games including swimming.
Research
Apart from dissemination of knowledge, PMI strongly believes in undertaking research projects on topics related to management development. A beginning has been made in this direction and a culture and an atmosphere stimulating research is being created in the institute. . Consultancy PMI has made a foray in the area of Management consultancy by being a part of the Arthur Anderson consortium in the Andhra Pradesh power sector reforms and restructuring process. With the restructuring of most of the SEBs in the offing, PMI is poised to become a major player in this direction by offering consultancy in the area related to training, HR and financial restructuring.
34
20 10 - 11 20 09 - 10 20 08 - 09 20 07 - 08 20 06 - 07 20 05 - 06 20 04 - 05 20 03 - 04 0
S e ries1
600 50 0 10 00 1 50 0
35
PROGRAMMES CONDUCTED
p r o g r a m m e s c o n d u c te d 350 100 150 170 300 190 250 200 2 003-04 2 004-05 2 005-06 2 006-07 2 007-08 2 008-09 2 009-10 2 010-11
36
PARTICIPANTS TRAINED
participants trained 5% 2003-04 2004-05 2005-06 2006-07 2007-08 2008-09 2009-10 2010-11
22%
6%
8% 11%
19% 16%
13%
37
EXTERNAL ORGANIZATIONS
external organisations
250
2 0 1 0 -1 1 2 0 0 9 -1 0 2 0 0 8 -0 9 2 0 0 7 -0 8 2 0 0 6 -0 7 2 0 0 5 -0 6 2 0 0 4 -0 5 2 0 0 3 -0 4
38
EXTERNAL PARTICIPANTS
external participants 100 200 2003-04 2004-05 2005-06 2006-07 2007-08 2008-09 2009-10 2010-11
590
250 300
550 450
350
39
Problem Undertaken
To evaluate the effectiveness of training and development programs conducted at NTPC (Dadri).
40
The main objectives of our study are To study the Training and development function at NTPC. To evaluate the effectiveness of training programs conducted. To suggest measures for improvement.
41
42
William James of Harvard University estimated that employees could retain their jobs by working a mere 20-30 percent of their potential. His research led him to believe that if these same employees were properly motivated they could work at 80-90 percent of their capabilities. Behavioral sciences concepts like motivation and enhanced productivity could well be used for such improvements in employee output. Training could be one of the means to achieve such improvements through the effective and efficient use of learning resources. Training is a long-term investment in human resource using the equation given below:
WHY IS THERE A NEED FOR TRAINING AND WHY HAVE WE CHOSEN TO STUDY THIS TOPIC?
Organization viability and the transformation process The primary concern of an organization is its viability and hence its efficiency. There is continuous environmental pressure for efficiency, and if an organization does not respond to this pressure, it may find itself rapidly losing whatever share of the market it has. Employee training, therefore, imparts specific skills and knowledge to employees in order that they contribute to the organizations efficiency, and be able to cope with the pressures of the changing environment. Technological advances There has been tremendous development in industrial technology. Mechanization and automation of the plant is necessary for the organizations survival; hence, it has to train its employees for more skilled positions. New skills are required to operate new machinery, or familiarity with new processes and production techniques has to be
43
introduced.
Organizational Complexity
With increasing mechanization, automation and development in technology, many organizations have emerged as complex organizations that produce a wide range of products or offer a wide range of services. This had led to complex problems of coordination and integration of activities. Eventually the need for training and retraining is felt at the all levels in such organizations, from shop floor to top executives.
Human Relations
The growing complexity of organizations has led to various human problems, like alienation, inter-personal and inter-group problems. Hence, training in human relations is becoming extremely important for tackling these problems. Due to its great relevance in the current automated, mechanized and extremely competitive business environment, where skills are becoming obsolete faster than ever, we have chosen to study in detail the training and development needs of employees.
44
training programmes of various types as a regular part of an adequate personnel development programme. Such programs are definite assets in helping managers to learn correct job methods, to achieve a satisfactory level of job performance, and to acquire capabilities that would be valuable in possible future jobs. The following steps must form the basis of any training activity: 1. 2. 3. Determine the training needs and objectives. Translate them into programs that meet the needs of the selected trainees. Evaluate the results.
TRAINING INPUTS
There are three basic types of inputs: skills, attitudes, and knowledge. The primary purpose of training is to establish a sound relationship between the worker and his job- the optimum man-task relationship. Such a relationship is at its best when the workers attitude to the job is right, when the workers knowledge of the job is adequate, and he has developed the necessary skills. Training activities in an industrial organization are aimed at making desired modifications in skills, attitudes and knowledge of employees so that they perform their jobs most efficiently and effectively.
SKILLS
Training activities nowadays encompass activities ranging from the acquisitions of a simple motor skill to a complex administrative one. Training an employee for a particular skill is undertaken to enable him to be more effective on the job. For instance, new workers can be trained to achieve levels of output attained by experienced older workers. Similarly existing workers whose levels of output are below par can be retrained.
ATTITUDE
Through orientation (induction) programmes, organization develops attitudes in new employees, which are favorable toward the achievement of organizational goals. Training programmes in industry are aimed at moulding employee attitudes to
45
achieve support for company activities, and to obtain better cooperation and greater loyalty.
KNOWLEDGE
Training aimed at imparting knowledge to employees in the organizations provides for understanding of all the problems of modern industry. This knowledge for a worker is specific to his job, and related broadly to plant, machinery, material product, and quality and standard of product. Knowledge for managerial personnel may be related to complexity of problems in organizing, planning, staffing, directing and controlling. In general, training initiated for imparting knowledge to employees should consider three aspects: 1. 2. 3. Knowledge in general about factory and work environment- job context Specific knowledge related to job- job content Knowledge related to quality and standards of product or quality of work.
AREAS OF TRAINING
Areas of training can be classified into the following categories: 1. 2. 3. 4. 5. Training in company policies and procedures (induction training) Training in particular skills. Training in human relations. Managerial and supervisory training. Apprentice training.
46
47
Apprentice Training
The Apprentice Act 1961 was based on the philosophy of providing some technical training for unskilled people in order that their employment opportunity is enhanced, or alternatively to help them be self-employed. Industrial organizations in specified industries are required to train apprentice in proportion to their workforce in designated trades. The duration of training is one to four years.
48
Motivation
A trainee needs to have a desire to learn and benefit from the programme. If he is not interested, or is demotivated, then the learning outcome is going to be insignificant and the company will have spent its money badly. On the other hand, being too intense about learning and outcome may result in setting over-ambitious goals for the individual.
Reinforcement
Following on the concept of motivation is that of reinforcement. For learning to take place and be internalized to the desired extent, a trainee is rewarded or given some encouragement. This reinforcement, or the acknowledgement that what has been acquired is desirable, can be either an extrinsic or intrinsic reward- external praise or some tangible reward, or the individuals feeling of a sense of progress. Current stress is on positive support and helpful behavior, even when mistakes are made.
Feedback
During the training process, it is useful for the trainee to be told how he is progressing. The knowledge of results is, several researchers have confirmed, an effective motivator. Constant and periodic feedback has positive effects on the trainees learning. Unless the trainee knows how close his performance comes to the desired standard, he will not have an opportunity to improve. Feedback, therefore, provides a basis for correcting oneself. Secondly, feedback helps to sustain the trainees interest in the task, or in the learning that is taking place, by bringing greater involvement with the learning process. If feedback is to be meaningful, it should follow a learning segment as quickly as possible.
49
Transfer Of Training
The maximum use of training can be made if the trainee is able to transfer his learning to his actual work role. This is possible if elements are incorporated in the training situation from the job role, either existing or proposed. The more similar the learning situation is to the job situation, the higher the degree of transfer the trainee can expect, and hence the greater the relevance of the training programme.
Repetition
Repetition etches a pattern into our memory, e.g., when one studies for an examination, it is necessary to repeatedly go over ideas so that they can be recalled later.
Relevance
Relevance relates to the meaningful use of material, which aids learning, e.g., trainers usually explain in the overall purpose of a job to trainees before assigning them a particular task.
TRAINING POLICY
A company's training policy represents the commitment of its top management to training, and is expressed in the rules and procedures that govern or influence the standard and scope of training the organization. Training policies are necessary for the following reasons. 1. To highlight the firm's approach to the training function, provide guidance for design and execution, and to provide information regarding programmes to all employees. 2. Formulation of policy helps in identification of priority areas in training, and since resources are scarce, they are prioritized according to felt needs. 3. A training policy document helps to communicate the firm's intent regarding an employee's career development, and also gives the employee the opportunity to better his prospects through training.
50
51
TRAINING METHODS
Training methods are a means of attaining the desired objective in a learning situation. Given background work such as identification of training needs, a programme design and its duration (based on these needs), it then becomes pertinent to analyze and select the best method or combination of methods, given the several constraints, to attain the programme objective. The choice of a method several constraints, to attain the programme objective. The choice of a method would depend on a wide variety of factors, such as competence of instructors, relevance to the participants, the programme design, i.e., is a particular method the best vehicle to put across the contents, and finally its cost implications. Numerous training methodologies and techniques have been developed over the years to meet certain specific needs. Each method has structured procedures for conduct that offer certain advantages in developing certain limited facets of a trainee, and suffer from some limitations. In using a particular method, one should know its strengths and weaknesses, given the situation, and analyze its relevance, its purpose, and if it is useful, how to get the most out of it. This would provide the rationale of the various training methods. The trainer should know the rationale of each of the methods before attempting to use any of them.
Demonstration value
Complete demonstration of job requirements is training of a kind that enables the
52
trainee to grasp the meaning of ideas, concepts, or procedures visually. Such a method can be used effectively as an aid to overcome the "breakdown of communication". People remember things that they see and hear, much longer than they do information they receive through talks or reading, alone.
Developing interest
One of the factors to be kept in mind in choosing a method is its ability to hold and arouse the interest of the trainee in the learning situation. Much research has been done in the field to test the effectiveness of various methods. A trainer has to consider alternative methods of presenting training material to participants in order to stimulate their interest and facilitate retention of the matter. For instance, if traditionally the matter has been presented through lectures, perhaps audiovisual methods could be used, or instead project work be assigned which would mean learning by doing or researching the subject oneself.
53
Finally, before selecting a training method, the trainer should keep the mind cost effectiveness.
Classification of Methods
Depending on the learning outcome, and the process by which it is attained, it is possible to categorize the various methods into several groups.
1. On-the-job training. 2. Job rotation. 3. Guidance and counseling. 4. Brainstorming sessions. 5. Syndicate method (working in small groups).
Simulation methods
Real-life situations are simulated for imparting training. The methods falling in this category are: 1. Role-play. 2. Case method. 3. Management games. 4. In-basket exercise.
Role Play
The role-play method requires participants to enact roles on the basis of a written script or an oral description of a particular situation. The enactment process provides
54
an insight and understanding of the demands and situations of the assigned role, thereby facilitating empathy with another's (actual) role. The main emphasis in management training is in facilitating better understanding of interpersonal problems, and attitude change. If not handled well, however, it could degenerate a childish exercise, where, instead of focusing on the problem to be understood, the situation might be over-dramatized.
Case method
The case is an actual situation, which is written for discussion purposes. Analysis would need problem identification, analysis of the situation and of its causes. There could be several solutions to the problem, and each of these alternatives and their implications needs to be examined. In the real world, on many occasions, a manager may not have all the relevant information with him before taking a decision. Similarly, the case method approximates this reality and in many situations decisions are taken with limited data, or what is termed decision-making under uncertainty. The managerial response in such a situation is explored and understood and learning consists of developing problem-solving skills.
Management games
The game is built around the model of a business situation and trainees are divided into teams representing the management of competing companies. They simulate the real-life process of taking operation decisions. Decisions taken are analyzed by a computer, or manually, and a series of the implications of these decisions are fed back. The game is played in several rounds to take the time dimensions into account.
In-basket exercise
This is a simulation training technique designed around the "incoming mail" of a manager. A variety of situations are presented which would usually be dealt with by an executive in his working day. His reactions and responses are taken down in writing and then analyzed. Feedback on his decisions forces him to re-consider not only his administrative actions but also his behavioral style.
Knowledge-based methods
55
In this method of training, an effort is made to expose participants to concepts and theories, basic principles, and pure and applied knowledge in any subject area. Basically, it is aimed at creating an awareness of the knowledge of fundamentals. The focus is essentially transmission of knowledge which has to be imbibed by the participants. The methods in this category are: 1. Lectures. 2. Seminars, workshops. 3. Educational training programmes at academic institutes. 4. Programmed instruction in which knowledge is disseminated in book form to be learnt at the individual's pace, and where feedback on the learning is a given aspect of the method. 5. Films and TV. 6. Group discussion, especially in combination with some of the above, for assimilation and integration.
TRAINING ORGANIZATION
There are several administrative aspects that have to be taken into account before launching in-house training programme, or nominating participants to external programmes.
In-Company/External Programmes
The company needs to formulate its thinking regarding participation in programmes offered by external agencies like educational management institutes, government institutions and consultant programmes, vis--vis conducting its own in-house programmes. Where employee numbers are small, it may not be worthwhile to set up a training establishment and conduct in-house programmes, but as the numbers increase, this options may offer a distinct possibility. There is the cost aspect to be considered: for the cost of sending a participant to an external programme, several employees could be trained within an organization. Yet, the advantage of an external programme would be a breath of fresh air through discussions with other participants and a fresh approach could be brought into the organization and its problems. The skills and techniques learnt might also be different from those offered by one's own in-house programmes.
56
Training Budgets
A training budget for each internal programme has to be prepared, which would include cost of facilities like training room, food, transport, guest faculty, if any, and cost of teaching materials. In fact, the cost to the organization should also include the wages and salaries of employee participants who would be temporarily pulled out of their regular jobs and sent for training. Yet, organizational requirements would necessitate their jobs being done by someone else. The reason for costing the trainee employee's salary would be that they would not be making any contribution to the company during the training period, and that this is an additional burden on the company's finances.
EVALUATION OF TRAINING
Evaluation of any activity is important, since in evaluating one tries to judge the "value or worth of the activity, using the information available". What is the purpose of evaluation? Evaluation, by bringing to the fore "weaknesses and failuresstrengths and successes," helps to improve training methods. Evaluation helps management to answer the following questions The relevance of the programmes to the organization's needs-what changes if any should be made in existing programmes to realign to the organization's needs. Feedback on the choice of areas of training will also need to be examined in the context of its contributions to the organization's effectiveness. Should the money continue to be spent on this activity, or another more relevant activity that will improve attainment of the organization's objectives? Reactions from trainees about the training programme can help identify its strengths and weaknesses.These reactions can be used as a base for the improvement of programmes, but those evaluating must first be definite about the aspects they are interested in investigating. An evaluation of a training method or system must also take into account the
57
suitability of objectives. "If the objectives were inadequately formulated in the first place, even a 'good' training programme has really no chance to be effective." Objectives have to be clear-cut, must relate to needs, and make way for changes. Objectives cannot be static and need to be re-appraised frequently so that training may result in improved overall organizational efficiency. Evaluation of objectives helps to bridge the gap between needs and objectives.
58
Imagine this: A man is having chest pains. He rush as to his doctor, tells him he is having a heart attack, and demands that he perform open-heart surgery. He obligingly agrees. It is not until after a great deal of pain and expense that he discovers it was only in digestion. When it comes to training, a similar situation happens all the time. If scrap rates are too high, productivity is too low, and employees neglect to follow standard quality procedures, they must need more training. Before rushing into the pain and expense of interrupting production to send them off to a seminar it is necessary to make sure that training is the proper solution. Just as a doctor must understand the cause of a patients symptoms before he can attempt a cure, one needs to know why employees are not meeting the companys expectations before taking action. Thats where a training-needs analysis will help. It tells how well employees are doing their jobs, where they could use some improvement and how that improvement can best he achieved. Done correctly, it can save the company from wasting a lot of time and money on inappropriate training programs.
A professional trainer can be hired to perform an analysis but its not just a technique for trainers. Everybody should be trained in this simple process. Its a supervisors or a managers job to make sure people can do their jobs. To do training needs analysis
59
Find the gap: What is the difference between the definition of ideal performance
and what the employees are currently doing? Are there any areas that arent functioning as well as they should? Where are there opportunities for improvement? This is the performance gap that the company is trying to fill. One must look for problems or opportunities that may occur in future as well as ones that already exist.
Identify the cause: Why are workers not working up to standard? Have they ever
performed the job correctly? Where and when do the problems occur? Has anything changed recently that might have instigated the problem? Compare best and worst performers to find the differences in what they do. When these steps have been completed one should be ready to make diagnosis, but it must be remembered that training is not the only medicine for ailing performance. Although it is often mistakenly applied as a cure- all, the only problem that training can solve is a lack of skills and knowledge. Do employees know how to do the job? Could they do it if their lives depended on it? If so, probably there is no training problem. There are many reasons why a worker might not be doing his job correctly, including unclear expectations, insufficient feedback, lack of incentive and adverse working conditions. These are all management problems that can only be improved by management changes. Too often, people see the gap and they want to just leap right in and fix it. The key is not to jump to the solution, which is assumed to be training. Understanding the situation is the first step. Then, once one understands the situation one can think about why (The problem exists). Only if its because (employees) lack skills and knowledge should training be considered as a solution.
60
2.
Keep sessions short. All days are much more fragmented than they used to
be "So when self directed modules are developed, there is no space for two hour or three hour modules. The training needs to be made into shorter chunks, so that it can fit into the shorter periods of time. "Training should be long enough to get a concept across, but not so long that it involves too many once.
3.
People need people. Many managers forget about the learners need for
contact with others. Seeing and being seen are very important in the political environments of today's companies and the classroom is where that often went on. If
61
we take that away from the classroom, we have to provide some other way for it to happen, because they learn form each other as well as learning from the class. Meetings, e-mail, and electronic forums are some ways to compensate for the isolation that self-directed learners may feel.
4.
Combine delivery methods. Self directed learning has many advantagesbut it is not the best choice for every situation. Self directed learning is much better for knowledge based learning. It can work for some skill based learning, but there are times when one wants to have hands on. A lot of your best programs are a combination. For example, a well-rounded program might start with an introductory session delivered by satellite. Self directed, computer based training could then get everybody up to speed on the basic information. Classroom sessions could then build on that knowledge by teaching hands on skills. The most important thing is to plan ahead in the initial training needs analysis for ways to support the unique needs of your self directed learners. That is a very important part of the needs analysis that is often neglected. We look at what are the learning objectives, but we don't look at what has to be taken care of in the organization and culture in order to achieve to those learning objectives.
62
The employee understands why the new knowledge is relevant and has a clear idea of how to apply it. Transforming telling into training isn't hard, if one includes these six key elements:
Objectives: Make sure trainees understand what the companies wants from
them. One of the biggest inhibitors of employee performance is unclear expectations.
Participation: Encourage them to ask and answer questions. Get them to try
the skills or apply the knowledge for themselves rather than just memorizing what you say or do. The more they participate, the more they will learn.
Feedback: Let them know how they're doing. This allows them to correct
mistakes before they become habits. It also helps them gain confidence, which will encourage them to feel comfortable applying new skills.
Rewards: If they're right, tell them they did well. If they're wrong, praise them
for trying. Even if there techniques are applied in small, informal ways, employees will understand what the company wants a lot better, once one stops telling and starts training.
63
Katz and Kahn (1978) have posited that organizations must have three behavioral features. People must be attracted not only to join the organization but also to remain in it. People must perform tasks for which they are hired and must do so in a dependable manner. People must go beyond this dependable role performance and engage in some form of creative, spontaneous and innovative behavior at work. The most important aspect that guides competitiveness in current turbulent markets in how companies gather, analyze and use information to their advantage. Thus IT capability that processes and manages information in a corporate will be the single most effective weapon in the era of information technology. As organizations shift from being product based to knowledge based there has been a shift, with accent on knowledge. Employees today need to adopt skill sets with ease. The knowledge worker of today is in a constant pressure to compete with redundancy, as knowledge and information is no longer a prerogative of a few. IT is affecting the people, process, structure and strategy of organizations. IT acts as an enabler to capture and disseminate information so that individuals can become knowledge workers. Keeping this in mind ,organizations need to realign their thought process and give training a fresh look. Things will never be the same in the e-era. With the world becoming a global workforce, organizations today have to compete at the international level. This has redefined job requirements in terms of skills, competencies and qualifications. Today development of the employee is a prerequisite to make the employees work for the company rather than in the company. Today it is not the aptitude that guarantees success but the attitude. Employees are being encouraged to learn that it is essential not to control one's emotions but to manage them and channelize them for their effective use. Workshops on emotional intelligence are quiet common in the corporate arena. One offshoot of EQ training is team building. Teamwork is highlighted in most companies and various outdoor training programs are conducted, even at the induction training stage, to nurture the team spirit. Other topics on which training is being encouraged in the new
64
millennium are communications, computer skills, customer service, ethics and quality initiatives.
65
IBM
ensuring attendance, role of HR is to facilitate choices. Has virtual university. IBM Global Campus provides employees across the globe self-driven learning via the corporate intranet. Extensive Lotus Training modules complete with tutorials and multimedia courseware are available online. Employees are encouraged to develop relationships with dispersed
Infosys Motorola
mentors. Every Info scion receives an average of 47 hours of training. 2.65% of turnover is spent on education and research. Every employee receives training for 40 hours annually. Motorola University is the most widely benchmarked university in the world. It is a $ 100 million global service business operating through 99 sites across 21 countries employing 400 staff members. University is run as an independent business operation, a profit center. 80% of the training is delivered in-house. No. of training days per employee is 13 days. "Back to School is followed where partial course fee is reimbursed for completion of part time professional courses. In-house tutorials and training procedures are distributed on the
NIIT
network without having to print huge documents. Training is conducted to familiarize employee with different cultures and business practices. It has a training center in Trivandrum where training for new entrants focuses on team building, presentation skills and grooming. It has a 72 days long training program.
One way to minimize the danger of a company losing its financial investment in training is to share the cost with the employee. By asking an employee to invest partially, one does increase the intrinsic value of the training to the employee since it
66
67
relationship in the networked age is a skill contract and the work is largely cerebral. The benefits resulting due to training prove that it is time for organizations to discard their parochial view and work towards developing their human assets. The people factor is the pivot for organizational growth. Aligning organizational vision to the development of employee is only possible way to become a success story in an environment which seems to be reverberating with two words: 'perform or perish'.
68
RESEARCH METHODOLOGY
69
Research in common language refers to a search for knowledge. Research is a scientific and systematic search for pertinent information on a specific topic. In fact, research is an act of scientific investigation. Research methodology is a systematic way to solve research problems. It may be understood as a science of studying how research is done scientifically. In it we study the various steps that are generally adopted by a researcher in studying his research problem. It is necessary for the researchers to know not only research methods/techniques but also the methodology. The scope of Research Methodology is wider than that of research methods. The research process consists of a series of closely related activities. At times, the first step determines the nature of the last step to be undertaken. Why a research study has been undertaken, how the research problem has been defined, in what way and why the hypothesis has been formulated, what data has been collected and what particular methods have been adopted and a host of similar other questions are usually answered when we talk of research methodology concerning a research problem or study.
SAMPLE SIZE
The sample size chosen was
Trainers: 10
The 10 faculty members were chosen from the total faculty strength of 12. The respondents were chosen randomly.
Trainees: 20
The 20 respondents chosen were from different departments and different levels in the organization. They also were chosen randomly.
70
1.
sources such as: Business magazines Journals Textbooks Internet Company Bulletin The details of these sources are mentioned in the bibliography.
2.
disguised questionnaire. Two questionnaires were designed: one for the trainers and the other for the trainees.
71
DATA PRESENTATION
72
In this chapter, the data collected from the respondents has been tabulated. Each question has been handled one-by-one in sequence. TRAINERS 1. What are the rules and procedures that govern the standard and scope of training in your organization? i. ii. training in a year b. Need based interventions (for gaps) c. Planned interventions (for development) iii. a. Yearly programs are mentioned with the duration in the training calendar. PMI follows the ISO 9001 standards a. Each individual has to undergo at least 7 days of
b. Excellent, experienced faculty is enlisted c. Individual feedback is sought after each program iv. a. Training needs analysis is done at corporate and project level b. Training schedule is made on the basis of training needs analysis (TNA) c. The total training policy is guided by HR development rules v Training policy is clearly laid down by Corporate office, NTPC
2.
i.
done ii.
73
c. Understanding the processes the participants are undergoing iii. iv. v. vi. By taking feedback, discussing with participants, department heads and project heads Identification through a mechanism of TNA between the employee and supervisor at all levels Through questionnaires and personal interactions with the heads of departments a. Actual interview with GM, HOD and some participants
b. Feedback of programs c. Performance appraisal form d. Needs identified by management, PMI vii. Organizational needs, customer feedback and practical experience
3.
4.
74
ii. Seminars iii. Case studies iv. Simulations v. Project work vi. Exercises vii. Management input and developing of managerial competencies through classroom lectures
7.
75
i. If resource-faculty and facility, are not available at PMI ii. Once in three years iii. In case of new programs, where NTPC has no experience iv. If workload at PMI is more v. When in-house faculty for the subject concerned is not available
9.
i. It is a change for participants. Also, they interact with participants of other organizations and can hence benchmark. ii. iii. In case of new programs, it gives a good idea for the development of NTPC personnel in that field a. New ideas b. Sharing of workload iv. Broader perspectives v. Some training requires conditioned environment, which can be taken care of. vi. Some of the topics such as Wagon maintenance can only be seen and understood in external training programs vii. It is more systematic, as they have expertise in their field
76
Training programs are on at PMI all year round. However, frequency of the program depends on the type of program. For example, computer sessions are held weekly, executive trainee programs are held once in a year. 12.
Past experience and bench marking with the current scenario Cost per participant x no. of participants to be trained
14.
15. What are the changing trends in T&D today? How is it different from what was done five years ago?
77
i. ii.
iii.
More computer based presentations are used, internet support for presentations and multimedia presentations Development need has shifted from skill to attitude More and more emphasis is being laid on T&D. Efforts are on at NTPC to train each employee for at least 7 days in a year iv. skills Focus is more on skills like presentation, communication and leadership Core values of NTPC are kept in mind. 16.
v.
What according to you are the roles and responsibilities of trainer and trainee in order to make a training program successful?
a) Trainer: i. Well experienced ii. Good leader iii. Patient listener iv. Conviction v. Thorough knowledge vi. Dedication vii. Appropriate preparation viii. Should evaluate effectiveness of the program ix. Facilitator x. Learner-centered b) Trainee:
i. Effective and attentive listener ii. Seriousness and commitment iii. Co-operation iv. Proper feedback on the session v. Positive attitude Both should function in partnership and the trainer should be concerned about the development of the learner.
78
17. What are the essential elements that go into making a training program successful?
Ranks Clear objectives Good faculty Right training method Physical arrangemen t Duration of training program Contents of TP Rewards/in centives after the TP 1 2 3 4 5 6 7
The Tally bars represent the number of respondents who have given specific ranks to each of the parameters. This would be further used to find out the final rankings.
79
18. What are the main problems you come across while training individuals?
i. ii. iii. For some people, training is merely a relief from regular monotony, so they want to relax during the training days instead of taking it seriously Sometimes, participants are sent not on the basis of their needs, but to satisfy the statistics If the batch is not homogeneous, it is a problem to maintain the flow in a training program iv. Caliber of individuals is of different levels v. Mindset vi. Participants sometimes dont have the prerequisite background for training
19. What methods are used to detect and overcome learning blockages that may be present?
i.
The program can be presented in a very attractive way, linking with practical life, site problems, learning atmosphere can be made friendly to have an open discussion. ii. Having a good ice-breaker at the beginning of the session By involving the participants, letting him express his views, listening to his views and problems and by solving them to some extent Trainers should identify the level of understanding of each participant and accordingly exercises should be given to make them comfortable v. vi. LSI and behavioral techniques Personal interaction
iii. iv.
20.
80
Benchmarking Computers/technological advancements Human relations BPR Core competencies, core value actualization, business strategies in the changing scenario
TRAINEES 1. What are the methods used for the analysis of your training needs?
i. ii. iii. iv. v. vi. vii. viii. ix. x. xi. Analysis by superiors or company, identification by individuals (TNA) Discussion with superiors Identification by group head or depending on departmental functional needs Feedback from persons to be trained about what training they need and this is incorporated in PMIs program to the extent possible by management Planned interventions training Questionnaires filled by participants Training is identified from a list which has been proposed by the training department, by the employee based on his needs and aptitude Self analysis Depending on the type and nature of job being handled Discussions at departmental levels Keeping in mind the career map of an employee and also the functional requirements
2.
Response Yes No
81
3.
i. Company policies and procedures ii. Functional skills iii. Human relations iv. Problem solving v. Managerial and supervisory training vi. Apprentice training vii. Creativity viii. Strategic planning ix. Computers x. Cross-functional skills
4.
i. Computer programming ii. Core technical areas iii. Management related iv. Work culture and discipline v. Objectives of organization vi. HRD/HRM vii. Strategic management viii. Corporate governance ix. Behavioral and emotional training x. Interpersonal and interactive skills xi. Adaptability to change in future xii. Problem solving xiii. Communication skills
5.
ON THE JOB: i. Different locations with the location in charge ii. Practical work
82
OFF THE JOB: i. Lectures ii. Audio-visual aids iii. Simulations iv. Discussions v. Seminars vi. Workshops vii. Project work
6.
Response Yes No
7.
i. ii. iii. iv. v. vi.
8.
Do you think your objective of attending the training program is normally achieved?
Response Yes No No. of respondents saying 19 1
83
9. What according to you are the key areas in which training should be imparted?
i. Technical skills ii. Managerial skills iii. Computers iv. Functional areas v. Interpersonal relations vi. Self development vii. Behavioral skills viii. Handling workforce in the age group of 45-50 years ix. Human relations x. Communication skills
10. you provided with adequate continuing training to keep you abreast of the changes in the environment?
Response Yes No No. of respondents saying 12 8
11.
What are the methods used to evaluate the effectiveness of a training program?
i. Feedback after training ii. Improvement in performance iii. Written test / exam
12. Does the management take into consideration your opinion on training program?
84
Response Yes No
No. of respondents 11 9
13.
Any other, please specify: Participants not involved in training program planning No other shortcomings were mentioned.
14.
85
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Total Responses
3 3 3
3 3
3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 6 3 3 3 3 3 4 3
10
R: RESPONDENT
16.
In your opinion what are the inputs that would make a training program successful? (Rank the following in order of importance)
Ranks 1 2 3 4 5 6 7
86
Clear objectives
Good faculty
Physical arrangem ent Duration of training program Contents of TP Rewards/i ncentives after TP the
87
88
DATA ANALYSIS
89
The tabulation of the data collected was done in the previous chapter. Here, we will analyze and interpret the data and try to reach some final conclusion in the next chapter. We first begin with the analysis of the data collected from the T&D staff. We will analyze the responses to each of the questions in sequence. METHODS USED FOR TRAINING NEEDS ANALYSIS: From the data gathered, we can observe the following: The training needs analysis is done generally by discussion with superiors and departmental heads. However, the participants themselves also play a vital role in identifying their own training needs. Also, performance appraisal sessions and customer feedback are two important ways through which training needs can be analyzed. AREAS IN WHICH TRAINING IS IMPARTED: NTPC provides training in all the areas mentioned. However, the kind of training imparted to the employees is also dependent on their level in the organization. For example, training on company policies and procedures is provided at the Executive trainee (entry) level. It may be provided at other levels as well, but only when there are any changes in policies or procedures. TRAINING METHODS EMPLOYED: From the data collected, we see that lectures/classroom sessions are the most used methods for training. Again, the method used would be dependent on various other factors as seen in the next question. Also, on the job training is generally used at induction level. . BASIS ON WHICH TRAINING METHODS ARE SELECTED:
90
The choice of training methods at PMI is largely dictated by availability of resources. Also, training methods are selected on the basis of depending on the type of training to be imparted. For example, they generally use lectures for sessions on company policies and procedures. Also, for training on problem solving, more of case studies are used. . BASIS FOR CONDUCTING TRAINING EXTERNALLY: Training is outsourced very rarely. The only times when it is outsourced is when resources are not available or the workload at PMI is more. Also, in areas where NTPC does not have the expertise (for e.g., computers), training is outsourced to reputed organizations like NIIT, APTECH, etc. . ADVANTAGES OF CONDUCTING TRAINING EXTERNALLY: Most of the staff at PMI feels that conducting training externally has its advantages. They think that by attending training sessions outside the organization, the trainees acquire a broader perspective of looking at situations, since they get an opportunity to interact with others outside the closed walls of the organization. FREQUENCY OF THE TRAINING PROGRAM: Training programs are conducted at NTPC throughout the year. However, the frequency of training programs depends on the type of training being imparted and also the level of employees to which it is being imparted. For example, Capsule Course for managers is conducted around 9 times in a year. Training sessions on computer basics are conducted weekly. Also, Executive trainee programs are conducted once a year. . DURATION OF A TRAINING PROGRAM: Again the duration of a training program would depend on the type of training being imparted. Training sessions on Computer basics last for around 3-5 days. Training of Executive trainees lasts for a year. CHANGING TRENDS IN T&D TODAY:
91
From the data, it is clearly seen that the focus of training today has the right attitude. Even in a company like NTPC, where training was largely concentrated on imparting technical knowledge, the focus today is on overall development of the employee, so that he is ready to face challenges posed by the fast changing environment.
Also, sophistication of technology has made T&D easier, effective and also faster than before. The aids used for training today are such that keep up the interest of the trainees and involve them in the process by appealing to as many senses as possible. . ROLES AND RESPONSIBILITIES OF TRAINER AND TRAINEE TO MAKE A TRAINING SUCCESSFUL: The trainer and the trainee have to work in co-operation in order to make a training program successful. A good trainer must understand the needs of his trainees and listen to his problems and queries patiently. But, this can happen only if the trainee takes interest in the program and wants to gain something substantial from the program. He should look upon the trainer as somebody who can guide him and help him with his problems, and not as someone who is there to lecture him on a subject. Thus, the right attitude is required-both on the part of the trainer and the trainee. ELEMENTS THAT GO INTO MAKING A TRAINING PROGRAM SUCCESSFUL: The data tabulated in the previous chapter is reproduced here for convenience: Ranks 1 2 3 4 5 6 7 Final Ranks Clear objective s 1
Good faculty
92
Right training method Physical arrange ment Duration of training program Contents of TP Rewards /incentiv es after 7 the TP 3 5 6 4
The Tally bars represent the number of respondents who have given specific ranks to each of the parameters. The above table can be used to obtain rankings of the elements in the order of importance. From the above table, we can clearly see that a clear objective is the most important element that goes into making a training program successful. Also, the least important element, rewards/incentives after the training program. according to the T&D staff is
From the table, we can see that there is a tie between good faculty and contents of the program for the second rank. However, as two respondents have ranked good
93
faculty as the most important element, whereas, contents of the program has not been ranked first by any respondent, we have assigned second rank to good faculty and third rank to contents of the program. Here, we have used the method of Moving Averages. The other rankings have also been obtained in a similar way. MAIN PROBLEMS IN TRAINING OF INDIVIDUALS: The main problem the trainers come across while training of individuals is that many a time the trainees are sent for training not because they need it, but to satisfy the statistics of 7 days of training each year for each employee. As a result, most of the times, the trainees are not interested in the program and this creates a major problem in getting the trainees involved in the process. METHODS USED TO OVERCOME LEARNING BLOCKAGES: One of the ways to overcome learning blockages is to have a good icebreaker at the beginning of the session. Also, most trainers think that it is necessary that the trainer understand the level and capacity of each trainee, and deal with each accordingly. This would help the trainee open up to the trainer convey his problems and difficulties without any hesitation. POTENTIAL AREAS OF TRAINING IN FUTURE: It is clearly seen from the data gathered that in future the emphasis would not be on developing functional skills. Instead the emphasis would be on human relations. Also, with most of the processes at NTPC being automated and computerized, the knowledge of computers would be extremely essential. Thus, this would be a main area of training in future. TRAINEES METHODS USED FOR TRAINING NEEDS ANALYSIS: Training needs analysis is generally done by discussions with superiors and departmental heads. The participants are also involved in the analysis of their own training needs. Thus, the decision on what type of training is required by an individual is not taken by his superiors alone, but by the trainee and his superior
94
E F F E C T IV E N E S S O F T R A IN IN G ME THO D S US E D
15% Ye s
IDENTIFICATION OF TRAINING NEEDS
10%
No
Yes No
85%
90%
together. The superior analyzes what kind of training is required by the individual and the trainee gets an opportunity to assess his strengths and weaknesses and decide in which area he requires additional expertise.
90% of the respondents said that they were involved in the identification of their training needs, whereas only 10% respondents said that they were not involved. . POTENTIAL AREAS OF TRAINING IN FUTURE: According to the trainees, the stress in future would be definitely on people skills and communication skills. Also, training in coping with change in this fast changing environment would be a key training area. And of course, the focus would also be on computers, since survival without computer skills would be difficult in this highly automated environment.
95
85% of the respondents said that the training methods used were relevant and effective.
96
. OBJECTIVES IN ATTENDING A TRAINING PROGRAM: Majority of the respondents had gaining knowledge as the main objective in attending a training program.
Yes No
95%
. 95% of the respondents felt that their main objective in attending a training program was satisfied, i.e. they gained what they expected to gain from the training program.
CONTINUING TRAINING
40% 60%
Yes No
Almost 40% of the respondents felt that they were not being provided adequate training to keep them abreast of the changing environment. Although they agreed that they benefited from training programs, they thought that emphasis should be on training individuals to prepare them for future uncertainties, for example, managing change.
97
45% 55%
Yes No
45% of the respondents said that the management does not take into consideration their opinion on the training program planning. They are involved in TNA, but not in the program planning.
Yes No NA
Out of the 9 respondents who said that they were not involved in the TP planning, only 6 (30%) have communicated their dissatisfaction to the management. . WAYS IN WHICH THE TRAINEES WOULD LIKE TO BE INVOLVED IN IMPROVING/PLANNING THE TRAINING PROGRAM IN FUTURE:
98
The table is reproduced here for convenience: R 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Total Responses Rankings 9 3 6 10 3 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Individual views Commn. meeting 3 Survey 3 Suggestion box F/b on PA
II
III
IV
R: Respondent Depending upon the number of responses obtained by each parameter, we will obtain a final ranking for the various parameters. From the table, we see that conducting a survey of the participants for planning a training program has got the most responses. Hence, it has been ranked first. The other rankings have obtained in a similar manner. . ELEMENTS THAT MAKE A TRAINING PROGRAM SUCCESSFUL:
99
The table from the earlier chapter is reproduced here for convenience. Ranks Clear objectives 1 Good faculty Right training method Physical arrangeme nt Duration of training program Contents of TP Rewards/i ncentives after TP the 7 4 6 5 3 2 2 3 4 5 6 7 Final Ranking 1
100
From the above table, we can obtain the rankings for each of the elements. For example, we can clearly see that clear objectives has been ranked first by most of the respondents, hence we place it at the first position, as the most important element in making as training program successful. Rewards and incentives has been ranked 7 by most respondents, hence we assign it rank seven. Good faculty is ranked 2. By using the method of Moving Averages, we can see that contents will be assigned rank 3 and right training method will be ranked fourth. Other rankings can be obtained similarly.
101
CONCLUSIONS
102
From the analysis done in the previous chapter, we can arrive at the following conclusions:
Training needs analysis is done taking into consideration the views of not only the superiors, but also the trainees themselves. This was confirmed from the responses of both the trainees and the trainers. The trainees felt good that they were involved in the analysis of their own needs and also said that the management was very co-operative and tried to incorporate their views and suggestions to the extent possible. Thus, as far as this aspect is concerned, the trainees were satisfied with the procedures followed.
Both the trainers and the trainees felt that the thrust in future should be on developing people skills and not only functional skills. They also said that IT would be a focus area. Most of the times trainees were not involved in the training program planning.
Both the trainees and the trainers were in agreement on the most essential elements that go into making a training program successful. The final ranking obtained is the same in both the cases. This only goes to show that NTPC is aware of the needs of the participants and also understand what elements are most important for a trainee. For both, clear objective is the most important element that makes a training program successful.
We can conclude that NTPCs efforts towards training and development have been quite successful. The employees are satisfied with the training activities, but they only feel that they should be involved in the planning of the Training Program. According to them, their views should be taken on all issues instead of just informing them that they have to attend a training program. They should have a say in deciding on the contents, physical arrangements, etc. This would involve them further in the exercise and they would be more open to learning.
103
RECOMMENDATIONS
104
Training
should
be imparted
on
current
issues
like
change
management, because although the employees are quite satisfied with the training programs as a whole, they still feel that training should be imparted on issues that are relevant in the current business scenario. Training sessions should not be too long, long sessions should be split up into modules. Self-directed learning in some areas should be encouraged.This would save the companys time and also reduce costs.
105
BIBLIOGRAPHY
106
1.
Personnel
Management
by
Arun
Monappa
and
Mirza.S.Saiyadain
2.
Learning to Learn, Sylvia Downs (Handbook on Truelove) Quality Magazine, January 1998, Training Trends:
Quality Magazine, October 1998, Training Trends: Every Manager is a mentor. Source: www.qualitymag.com
6.
Quality Magazine, April 1999, Training Trends: Supporting self-directed learning. Source: www.qualitymag.com
7.
Quality Magazine, November 1999, Training Trends: On the job training-Do it right! Source: www.qualitymag.com
8.
Never Stop Listening, Never Stop Learning, Never Stop Training, Pramod Batra and Deepak Mahendru.
9.
HRD through training, The Economic Times dated Training: Mantra of the new millennium, Sangam
11-2-94.
10.
107
ANNEXURE
108
3. is imparted?
Company policies and procedures Functional skills Human relations Problem solving Managerial and supervisory training Apprentice training
Any other, please specify ___________________ 4. 5. In future, what according to you would be the potential areas of training? What are the various training methods employed?
109
On the job: Off the job: 6. Do you think the methods used are relevant and effective?
Yes No
7.
8.
9.
Gain knowledge in your area Get promotion Get free holiday To enjoy social get together Any other, please specify ____________________
Do you think your objective of attending the training program is normally achieved?
10.
Yes No
What according to you are the key areas in which training should be imparted?
110
11.
Are you provided with adequate continuing training to keep you abreast of the changes in the environment?
Yes No
12.
If no, in what areas do you think the company should impart continuing training?
13.
What are the methods used to evaluate the effectiveness of a training program?
Feedback after training Improvement in performance Promotion / increment Written test / exam
14.
Does the management take into consideration your opinion on the training program planning?
Yes No
111
15.
Identify the shortcomings in the training programs, if any, regarding the following: 1. Physical arrangements: 2. Faculty: 3. 4. Training methods: Contents of the program:
Any other, please specify__________________________________ 16. Have you communicated these problems to the management?
17.
Yes No
In what way would you like to be involved in improving / planning the training program in future?
Take our views individually Hold a communication meeting Conduct a survey Suggestion box Feedback session on performance appraisal
112
18.
In your opinion what are the inputs that would make a training program successful? (Rank the following in order of importance)
Clear objectives (gain knowledge/skills) Good faculty Right training method Physical arrangements Duration of training program Content of the training program Reward/ incentive after the training program.
113