Escolar Documentos
Profissional Documentos
Cultura Documentos
2011
Class 2800
CONTENTS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Catalog Numbering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Indoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Outdoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 Wall-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 Pedestal-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Radio Frequency Identification (RFID) Accessories . . . . . . . . . Page 10
Description
EV 2 _ 30 _ P D R _ R _ _ _
Output Voltage System: 2 = 208/240 24 = 240 only 4 = 480 6 = 600 Maximum Output Current: 16, 30, 80, 100, 125, 150 . . . Enclosure Type: R = 3R Output: D = DC Advanced Features Codes
2 06/06/2011
Interface: Segmented charge and delay charge progress indicator Stop Button and Indicator Power status and system detected fault indicator Delay button and indicator
Protection: Integral Ground Fault Protection at 5 mA Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss
Cable Holder: Supports and helps organize the cable Independently mounted from enclosure Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter)
Catalog Numbers
Table 1: Indoor Charging StationWall-Mount
Output Voltage System Output Current Mounting Type
240 Vac only 30 A Wall
Catalog Number
EV2430WS
Charging Units
Single
Application
Indoor
Features
Delay Start
Technical Specifications
Table 2: Figure 1: Indoor Charging Station Wiring Diagram Indoor Charging Stations
240 Vac Only, single-phase, 60 Hz, 30 A maximum Line 1, Line 2, and Ground 2-pole, 40 A, non-GFCI type 240 Vac, 30 A, 7.2 kW max.
Power Specifications
Input Power Input Power Connection Feeder Circuit Breaker Output Power
Physical Specifications
120 V 120 V 240 V Overcurrent Protection Device Electric Vehicle Charging Station
Enclosure Type Enclosure Dimensions (W x H x D) Enclosure Mounting Cable Type Cable Length Cable Management Shipping Weight Type 1 (Indoor only) 9.53 x 12.73 x 4.36 in. (242 x 323 x 111 mm) Wall-mount SAE J1772 18 ft. (5.5 m) Non-retractable, separate from the enclosure 17.0 lbs. (7.71 kg)
Equipment Ground
User Interface
Power Available Charging Ground Fault Stop Delay Start Status indicator Eight-segment progress indicator Red status indicator Push button and red stop indicator Push button to delay up to eight hours, in one-hour increments
Protection
Ground Fault Protection Ground Fault Protection System Test Integral, CCID 5 mA, auto reset Automatic at the beginning of each charge cycle
Environmental
Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions -22F to 131F (-30C to 55C) 15 kV open air, 8 kV contact 6 kV 20 V/m 20 V 2 kV FCC Class B
Standards Compliance
NEC Article 625 SAE J1772 UL 2594, UL 2231-1, UL 2231-2, UL 991, UL 1998, and UL 2251
4 06/06/2011
Dimensions
Figure 2: Indoor Charging Station
9.53 (242)
4.4 (111)
12.7 (323)
Figure 3:
Cable Bracket
5.5 (140)
3.1 (79)
in. Dimensions: (mm) 2x 1.25 (32) 2x 1.5 (38) 3.0 (76) 6x .25 (6.4) 3.3 (84)
5.2 (132)
1.5 (38)
4.5 (114)
8.2 (208)
4.3 (109)
Protection: Interface: Power status Charge indicator System detected fault indicator Integral Ground Fault Protection at 5 mA Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss
Authentication: Localized RFID solution (optional) Enclosure: Metallic enclosure Indoor/outdoor wall-mount
Cable Holder: Supports and helps organize the cable Independently mounted from enclosure Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter)
Catalog Numbers
Table 3: Outdoor Charging StationsWall-Mount
Output Voltage System Output Current
208240 Vac 208240 Vac 30 A 30 A
Catalog Number
EV230WSR EV230WSRR
Features
RFID (non-networked)
6 06/06/2011
Pedestal-Mount
Features
Protection: Integral Ground Fault Protection at 5 mA Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss
Cable and Connector Holders: Support and help organize cables Connector storage Integral with the enclosure
Connector and Cable: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter)
Mounting: Outdoor Charging Station (Single Unit, Pedestal-Mount) Commercial Applications Metallic Pedestal Outdoor Charging Station (Dual Unit, Pedestal-Mount) Commercial Applications
Catalog Numbers
Table 4: Outdoor Charging StationsPedestal-Mount
Output Voltage System Output Current
208240 Vac 208240 Vac 208240 Vac 208240 Vac 30 A 30 A 30 A 30 A
Catalog Number
EV230PSR EV230PDR EV230PSRR EV230PDRR
Mounting Type
Pedestal Pedestal Pedestal Pedestal
Charging Units
Single Dual Single Dual
Application
Outdoor Outdoor Outdoor Outdoor
Authentication
RFID (non-networked) RFID (non-networked)
Technical Specifications
Table 5:
Input Power Input Power Connection Feeder Circuit Breaker Output Power Physical Specifications Enclosure Type Enclosure Dimensions Enclosure Mounting Cable Type Cable Length Cable Management Outdoor Wall-Mount Charging Station Unit Options Type 3R See Dimensions on Page 9 Wall or Pedestal SAE J1772 18 ft. (5.5 m) Non-retractable, integral with the enclosure Single unit (Wall-mount) Single or Dual units (Pedestal-mount)
User Interface Power Available Charging System Detected Fault Authentication Type Programming Protection Ground Fault Protection Ground Fault Protection System Test Environmental Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions Single Unit Dual Unit Standards Compliance NEC Article 625 Outdoor Pedestal-Mount Charging Stations SAE J1772 UL 2594, UL 2231-1 & UL 2231-2, UL 991, UL 1998 and UL 2251 -22F to 131F (-30C to 55C) 15 kV open air, 8 kV contact 6 kV 20 V/m 20 V 2 kV FCC Class B Integral, CCID 5 mA, auto reset Automatic at the beginning of each charge cycle Non-networked RFID authentication card Radio frequency remote control Status indicator Blinking blue indicator Red status indicator
8 06/06/2011
Dimensions
Figure 4: Outdoor Wall-Mount Charging Station
9.8 (250)
13.1 (333)
20.5 (521)
18.1 (460)
Figure 5:
Figure 6:
13.0 (330)
13.0 (330)
6.7 (170)
7.9 (200)
5.9 (150)
49.6 (1260)
49.6 (1260)
2x .70 (17.5)
3.0 (76.2)
4x R .30 (7.5)
Single Unit
Catalog Numbers
Description
RFID Handheld Programmer RFID Authentication Card (Quantity of 10)
Catalog Number
EVRFIDHP EVRFIDKF-10
Handheld Programmer
Features
Used to add and remove users One needed for total charging station system Connects via radio frequency Feedback via audio tone and LED indicator on Proximity Reader 4-digit PIN access
Technical Specifications
Frequency Dimensions Weight Operating Temperature Color Material 125 kHz / 62.5 kHz 7.0 x 2.5 x 0.75 in. (178 x 63.5 x 19 mm) 7 oz. (200 g) -22F to 131F (-30C to 55C) Black ABS
Dimensions
in. Dimensions: (mm)
7.0 (178)
2.5 (63.5)
.75 (19)
10 06/06/2011
Technical Specifications
Frequency Weight Operating Temperature Humidity Material 125 kHz / 62.5 kHz 0.31 oz. (8.8 g) -40F to 158F (-40C to +70C) 0100% non-condensing ABS
Dimensions
in. Dimensions: (mm)
3.37 (85.5)
2.13 (54)
.034 (.86)
Schneider Electric is a trademark or registered trademark of Schneider Electric. Other trademarks used herein are the property of their respective owners. 2800CT1001 2011 Schneider Electric All Rights Reserved
06/06/2011