Escolar Documentos
Profissional Documentos
Cultura Documentos
MotoSim EG-VRC
MotoSim EG-VRC (Motoman Simulator Enhanced Graphics Virtual Robot Control) is a comprehensive software package that provides accurate 3D simulation of robot cells. This powerful simulation software can be used to optimize robot and equipment placement, as well as to perform collision detection, reach modeling and cycle calculations. It also provides accurate off-line programming of complex systems. Virtual Robot Controller capability means that the simulation software now operates and displays the actual programming pendant interface for the DX100 and NX100 controllers. The VRC supports standard INFORM (robot language) instructions, and can completely simulate the DX100 and NX100 controller software in the PC environment, including system configuration functions and condition file editing.
be modified to increase efficiency and reduce cycle time without sacrificing production schedules.
MotoSim EG Components
Virtual Testing
n Sample system cells are available on the installation CD and accessory parts.
n Whether a programmer is using n Detailed path calculation function a teach pendant on a DX100 plots robots trajectory to simplify or NX100 controller or using program verification . MotoSim EG-VRC on a PC the interface display is exactly the same. n Creates process angles, allowing user to create programs that Steps used to accomplish actions maintain the robots tool orientation in the virtual world of the simulator in relation to an uneven surface, are identical to the actions required such as a sharply angled part, or in the actual (real) world. gradually changing shapes, such as Cell Layout Advantage propellers or motorcycle gas tanks. n Using a standard 3D graphics Off-Line Programming engine provides ability to add n Robot paths, speeds and other markups/comments to robot program data such as tool center simulation and accurately measure points, user frames, and I/O distances. Ability to create monitors can be defined on the PC. permanent measurement lines is a big advantage during the cell n User can move the virtual robot, layout process. enter the data to create a robot program, and download it to the Increase Uptime robot controller. n MotoSim EG-VRC reduces n When Motoman Robotics MotoCal programming time, thus increasing software and optional filters uptime of the production equipment. are used, programs created in New parts can be programmed MotoSim EG-VRC can be downoff-line before production begins, loaded to the robot controller with and existing robot programs can minimal or no touch-up.
n High accuracy allows programs to Capabilities be tested on the PC instead of on n Enhanced multiple robot the robot system, reducing robot control. downtime. n Independent/coordinated n Enables user to make changes to motion functions. improve robot performance. n External axis control and coordination. n Macro command. n Relative job. n Collision detection. n Same easy-to-use INFORM language instructions as the robot controller. n Can be used to minimize fixturing errors. n Can be used to reduce robot installation time. n User-definable view. n Cycle time and reach analysis.
...with MotoSim EG...a powerful tool that takes the guesswork out of system design.
MOTOSIM EG-VRC
SCREENS
ASSEMBLY APPLICATION
PRESS LINE
OPTIMIZE YOUR DESIGN AND YOUR PROCESS...BEFORE THEY'RE BUILT! MINIMUM SYSTEM REQUIREMENTS
n Windows XP
COMPATIBILITY
n DX100 controller n NX100 controller n NXC100 controller NOTE: Previous controllers can not be created in MotoSim EG-VRC. MotoSim EG-VRC can open and play back CEL files (.cel) previously created in MotoSim EG.
n 2 GHz processor n 1 GB RAM (2 GB recommended) n 256 M video card n 20 G hard drive (Systems may run on less)
www.motoman.com
TECHNICAL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DS-418-D 2011 yASkAWA AMERICA, INC. JUNE 2011
MOTOMAN ROBOTICS 100 AUTOMATION WAy, MIAMISBURG, OHIO 45342 TEL: 937.847.6200 n FAX: 937.847.6277
MOTOMAN IS A REGISTERED TRADEMARk WINDOWS IS A REGISTERED TRADEMARk OF MICROSOFT ALL OTHER MARkS ARE THE TRADEMARkS AND REGISTERED TRADEMARkS OF yASkAWA AMERICA, INC.