Escolar Documentos
Profissional Documentos
Cultura Documentos
A S S E M B L Y
I N S T R U C T I O N
4-40 x 1/2 Retainer Screw, 2 places DE9S Connector & DE9 Backshell A Custom 8 Pin Connector
OIT END NOTES: Shield wire must be terminated to connector metal shell. 1
2
PLC END
Solder shield wire to the DE9S connector metal shell. Install heatshrink tubing over the shield wire to avoid shorting.
OIT
9S RXD 2 TXD 3 Return 5
PLC
2 Shield 1 8P 7 4 2 TXD RXD Signal Ground
1 3 6 4 7
2 5 8
1025-0040, Rev 00
C A B L E
A S S E M B L Y
I N S T R U C T I O N
4-40 x 1/2 Retainer Screw, 2 places DE9S Connector & DE9 Backshell
To Chassis Ground
DE9 Backshell
PLC END NOTES: 1 Twist together 18 AWG green wire and shield wire. Solder wires and insulate with heatshrink to avoid shorting. Solder shield wire to the DE9S connector metal shell. Install 2 heatshrink tubing over the shield wire to avoid shorting.
1 Green
OIT END
OIT
9S RXD 2 TXD 3 Return 5 2
Shield
1025-0004, Rev 00
C A B L E
A S S E M B L Y
I N S T R U C T I O N
4-40 x 1/2 Retainer Screw, 2 places DE9S Connector & DE9 Backshell
To Chassis Ground
DE9 Backshell
PLC END NOTES: 1 Twist together 18 AWG green wire and shield wire. Solder wires and insulate with heatshrink to avoid shorting. Solder shield wire to the DE9S connector metal shell. Install 2 heatshrink tubing over the shield wire to avoid shorting.
1 Green
OIT END
OIT
9S RXD 2 TXD 3 Return 5 2
Shield
1025-0004, Rev 00