Escolar Documentos
Profissional Documentos
Cultura Documentos
SP-30
From 10 to 13 ton
SP-30 is a light sheet piler and needs only low hydraulic oil ow which makes it adequate to backhoe tractors. This model has all features of the Movax Sheet Piler in a compact size. Ideal unit for lighter sheet piling when surrounding environment demands gentle working methods.
From 18 to 30 ton
The design of sheet piler SP-E makes it suitable for wheel excavators. Vibra house of SP-E is lighter compared to other models. This increases the stability of excavator. Also the demanded hydraulic power is within the usual limits of the middle-class excavators. Side-grip technic demands a precise control of the driving movements. This can be reached by using the automatic operating device.
SPH-80
From 25 to 40 ton
Four shaft vibra construction, directional hitting and heavy duty design makes the SPH-80 an efficient sheet piler. Directional hitting reduces ground vibration to a lower level than in the same size conventional vibratory driver. Needed oil ow of 240 liters/ min at 280 bar and weight of 2400 kg requires a 35 t excavator.
Sheet pile wall for foundations of building. SPH-80 and Volvo .
SP-50F SP-60F
From 22 to 30 ton
SP-F piler is a two shaft, vibratory based sheet piler which has a proven vibra technology with a stronger built structure. Robust desing and suitability to under 30 ton excavator makes this model popular. F -models durability is based on strenghtened vibra housing and U-frame desing. Lubrication of the vibra-shafts bearings is ensured by oilpump. Compared to the E-model SP-F can handle bigger sheet piles due to its broader and stronger jaw construction compared to E-model.
Supporting wall facing neighbours lot border. SP-60F and Volvo EC290B LC
SP-30
+Tube clamps
From 10 to 13 ton
Standard SP-30 can be used for driving tubes and wooden poles with additional tube clamps. Maximum diameter for tubes/poles is 300 mm. These clamps are designed to work with variable diameter of wooden poles from 200 to 300 mm. Gripping force of the clamps can be adjusted for an optimal grip without damaging the pile or the wooden pole.
Tube driving for a foundation at a marina project. SP-30W and Watermaster Classic III
From 18 to 30 ton
These models are based on the technology of SP-E two-shaft vibratory piler. Tube driver differs from sheet piler in the design of the vibra house and the side grip which is specially shaped for the tubular piles. Basic diameter is 630 mm which can be reduced using additional reducers. Gripping force can be adjusted for an optimal grip without damaging the pile or the wooden pole.
Steel tubes used for foundation of noise walls and electric poles. SP-40W and Terex 1604 KZW
SPH-80W
From 25 to 40 ton
SPH-80W is a tube driver based on the technology of SPH-80 sheet piler. Its side grip is specially shaped for gripping tubular piles. SPH-80W can pick, lift, locate, drive and extract tubes up to 630 mm in diameter. With an additional top hitter on the bottom jaw of the tube driver also the very last meter of the pile can be driven. Picture on the left: tubes for supporting a pipeline on the sea shore are driven by SPH-80W. Also the tube holders on the top of the piles are lifted with same Movax using the bottom jaw.
Excavator operator has a challenging job to drive a pile vertically by keeping the pile on the linear movement. This requires the control of three different movements (main boom, stick boom and bucket cylinder) simultaneously. At the same time the angle of the pile is very difficult to see from the cabin of the excavator as a side view of the pile cannot be directly seen. Movax automatic operating device is developed to solve this problem. The main principle is that the operator controls one movement and automatic steering system takes care of the two remaining movements. This results to a linear movement of the pile.
Main boom, Stick boom and Movax angles are measured by sensors.
Automatic system calculates the position of the pile (distance and angle).
The pile is driven or extracted straight in vertical direction or in any other angle.
Display unit recognises that the operator is controlling one movement (Main boom), and takes care of the two others (Stick and Movax). This is done by controlling the proportional valves.
Operating with Movax is challenging itself not to mention when aiming to achieve the best performance with it and at the same time avoid all problems. As Movax is a unique machine, every operator has to be well trained in its use. When installing Movax, service engineers provide customers operator with the required operator training. It is also possible to
organise operator- or any other extra training for example in Unisto Oys premises in Hmeenlinna, Finland. The duration of such training is 3-5 days, depending on the program and customers needs, and includes both technical and practical training. If you want to know more, please contact Unisto Oy or your local dealer.
aCCeSSOrieS
Power-pack
Power-pack provides extra oil ow for the excavator and thus allows the excavator to be used with a bigger Movax model than without it. For example, under 30 ton excavator can be suitable for SPH 80 with Power-pack.
technical specifications: Hatz: engine 51,5 kW (3000 RPM) oil ow 85 l/min (at 280 bar) Deutz: engine 58,1 kW (2800 RPM) oil ow 105 l/min (at 280 bar) Air-cooling With piston pump In use only during vibration Suction from the excavator oil tank Pressurized oil straight to hammer line Driving valve and RPM activated by the vibra-button
10
Compacting plate
Compacting plate enables the Movax to be used as a deep compactor. Practical solution for deep compacting, for example slopes.
Adapters
Adapter plate is needed for connecting the Movax Side-Grip to different excavators. Adapters are taylored for different pin connectors and quick couplers.
11
teCHniCal Data
Sheet Pilers
Construction elements for side grip sheet pilers
Piler type SP-30 SP-40E SP-50E SP-60E SP-50F SP-60F Sheet piles - Width of the pile (mm) 400-600 600-1200 600-1200 600-1200 600-1200 600-1200 - Depth of the pile (mm) 150 210 210 210 230 230 - Weight of the pile (kg) 400 800 800 800 1200 1200 H-beams - Min. size H180 H240 H240 H240 H240 H240 Tubes (Needs optional pipe clamps which are tted to sheet pilers jaws) - Sizes 220, 200, 190, 170, 140, 115, 90 (individual for each Piler type)
SP 30 SP 40E / 50E / 60E SPH 80, SP 50F / 60F Pipe clamps for SP(H)
200/300 400 500 600 500 normal normal normal normal normal vibra vibra vibra vibra vibra 360/30 360/30 360/30 360/30 360/30 3 3+1 3+1 3+1 3+1 No No No No Yes 1) Oil ow by 240 bar 2) Oil ow at 280 bar only I-pump installation allowed 3) 25-30 ton excavator equipped with Movax power-pack
SP 30
SP 40E/50E/60E
SP 50F/60F
SPH 75/80
12
Tube Drivers
tube sizes for tube drivers
Piler type - Basic jaw size (mm) - Tube reducers
SPH-80W
SP 40W/50W/60W
SPH 80W
13
aPPliCatiOnS
14
15
USA, CANADA AND CENTRAL-AMERICA: Unisto Oys licenced manufacturer for Movax sheet pilers: Hercules Machinery Corporation Mr. John Jinnings Mr. Justin Reed 5025 New Haven Avenue Forth Wayne IN 46803 Tel: +1 800 348 1890 Fax: +1 260 422 2040 www.hmc-us.com