Você está na página 1de 7

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Overview
The compact high-performance CPU With 24 integral input/outputs Expandable by: - 1 signal board (SB) or communication board (CB) - 8 signal modules (SM) - Max. 3 communication modules (CM)

Technical specifications
6ES7 214-1BE30-0XB0 Product type designation Product version associated programming package Supply voltages Rated value 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) 120 V AC 230 V AC permissible range, lower limit (AC) permissible range, upper limit (AC) permissible frequency range, lower limit permissible frequency range, upper limit Load voltage L+ Rated value (DC) permissible range, lower limit (DC) permissible range, upper limit (DC) Current consumption Current consumption (rated value) Current consumption, max. Inrush current, max. Current output to backplane bus (DC 5 V), max. Power losses Power loss, typ. CPU 1214C AC/DC/Relay STEP 7 V10.5 or higher 6ES7 214-1AE30-0XB0 CPU 1214C DC/DC/DC STEP 7 V10.5 or higher 6ES7 214-1HE30-0XB0 CPU 1214C DC/DC/Relay STEP 7 V10.5 or higher

Yes 20.4 V 28.8 V Yes Yes 85 V 264 V 47 Hz 63 Hz

Yes 20.4 V 28.8 V

24 V 5V 250 V 100 mA at 120 V AC; 50 mA at 240 V AC 300 mA at 120 V AC; 150 mA at 240 V AC 20 A; At 264 V 1 600 mA; Max. 5 V DC for SM and CM 14 W

24 V 20.4 V 28.8 V

24 V 5V 250 V 500 mA; Typical

1.5 A; 24 V DC 12 A; at 28.8 V DC 1 600 mA; Max. 5 V DC for SM and CM 12 W

1.2 A; 24 V DC 12 A; at 28.8 V DC 1 600 mA; Max. 5 V DC for SM and CM 12 W

4/22

Siemens ST 70 2011

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Memory Usable memory for user data Work memory integrated expandable Load memory integrated expandable, max. Backup present without battery CPU-blocks Number of blocks (total) 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 214-1AE30-0XB0 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 214-1HE30-0XB0 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte

OB Number, max. CPU processing times for bit operations, min. for word operations, min. for floating point arithmetic, min. Data areas and their retentivity retentive data area in total (incl. times, counters, flags), max. Flag Number, max. Address area I/O address area I/O address area, overall overall Outputs Process image Inputs, adjustable Outputs, adjustable Digital channels integrated channels (DI) integrated channels (DO) Analog channels Integrated channels (AI) Integrated channels (AO) Hardware configuration Number of modules per system, max.

8 kbyte; Size of bit memory address area

8 kbyte; Size of bit memory address area

8 kbyte; Size of bit memory address area

1024 byte for inputs / 1024 byte for outputs 1 024 byte 1 024 byte 1 kbyte 1 kbyte 14 10 2 0 3 comm. modules, 1 signal board, 8 signal modules

1024 byte for inputs / 1024 byte for outputs 1 024 byte 1 024 byte 1 kbyte 1 kbyte 14 10 2 0 3 comm. modules, 1 signal board, 8 signal modules

1024 byte for inputs / 1024 byte for outputs 1 024 byte 1 024 byte 1 kbyte 1 kbyte 14 10 2 0 3 comm. modules, 1 signal board, 8 signal modules

Siemens ST 70 2011

4/23

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Time Clock Hardware clock (real-time clock) Backup time Deviation per day, max. Test commissioning functions Status/control Status/control variable Variables Forcing Forcing Communication functions S7 communication supported as server Web server supported user-defined websites Open IE communication TCP/IP ISO-on-TCP (RFC1006) Number of connections overall 1st interface Type of interface Physics Isolated Automatic detection of transmission speed Autonegotiation Autocrossing Functionality PROFINET IO controller Programming Configuration software STEP 7 Programming language LAD FBD SCL Cycle time monitoring adjustable 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0

Yes 240 h; typical +/- 60s/month at 25C

Yes 240 h; typical +/- 60s/month at 25C

Yes 240 h; typical +/- 60s/month at 25C

Yes Inputs/outputs, memory bit, DB, distributed I/Os, timers, counters Yes

Yes Inputs/outputs, memory bit, DB, distributed I/Os, timers, counters Yes

Yes Inputs/outputs, memory bit, DB, distributed I/Os, timers, counters Yes

Yes Yes Yes Yes Yes Yes 15; dynamically PROFINET Ethernet Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes 15; dynamically PROFINET Ethernet Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes 15; dynamically PROFINET Ethernet Yes Yes Yes Yes Yes

STEP 7 V10.5 or higher Yes Yes Yes Yes

STEP 7 V10.5 or higher Yes Yes Yes Yes

STEP 7 V10.5 or higher Yes Yes Yes Yes

4/24

Siemens ST 70 2011

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Digital inputs Number of digital inputs of which, inputs usable for technological functions m/p-reading Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", min. - at "0" to "1", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable 14; Integrated 6; HSC (High Speed Counting) Yes 24 V 6ES7 214-1AE30-0XB0 14; Integrated 6; HSC (High Speed Counting) Yes 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 6ES7 214-1HE30-0XB0 14; Integrated 6; HSC (High Speed Counting) Yes 24 V

1 mA

1 mA

0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 No; to be provided externally

0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 2; 100 kHz Pulse Train Output No; to be provided externally L+ (-48 V)

0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 No; to be provided externally

Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs of which high-speed outputs Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage for signal "1", min. Output current for signal "1" rated value for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max. Switching frequency of the pulse outputs, with resistive load, max. Cable length Cable length, shielded, max. Cable length unshielded, max.

2A 30 W DC; 200 W AC

0.5 A 5W 20 V 0.5 A 0.1 mA

2A 30 W DC; 200 W AC

10 ms; max. 10 ms; max. 1 Hz

1 s 5 s 100 kHz

10 ms; max. 10 ms; max. 1 Hz

500 m 150 m

500 m 150 m

500 m 150 m

Siemens ST 70 2011

4/25

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Relay outputs Number of relay outputs Number of operating cycles Analog inputs Number of analog inputs Cable length, shielded, max. Input ranges Voltage Input ranges (rated values), voltages 0 to +10 V Input resistance (0 to 10 V) Analog outputs Cable length Cable length, shielded, max. Analog value creation Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Conversion time (per channel) Encoder supply 24 V encoder supply 24 V Encoder Connectable encoders 2-wire BEROS Integrated Functions Number of counters Counter frequency (counter) max. Frequency meter controlled positioning PID controller Number of alarm inputs Number of pulse outputs Limit frequency (pulse) Operator control and monitoring Display Integrated Galvanic isolation Galvanic isolation digital inputs Galvanic isolation digital inputs between the channels, in groups of Galvanic isolation digital outputs Galvanic isolation digital outputs between the channels between the channels, in groups of 10 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm 2 100 m; twisted and shielded Yes Yes t100 kOhm 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0 10 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm

100 m; Shielded, twisted wire pair

100 m; Shielded, twisted wire pair

100 m; Shielded, twisted wire pair

10 bit Yes 625 s

10 bit Yes 625 s

10 bit Yes 625 s

permissible range: 20.4 to 28.8 V

permissible range: 20.4 to 28.8 V

permissible range: 20.4 to 28.8 V

Yes 6 100 kHz Yes Yes Yes 4

Yes 6 100 kHz Yes Yes Yes 4 2 100 kHz

Yes 6 100 kHz Yes Yes Yes 4

No

No

No

No 1 Yes; Relays No 2

No 1 Yes No 2

No 1 Relays No 1

4/26

Siemens ST 70 2011

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Permissible potential difference between different circuits EMC Interference immunity against discharge of static electricity Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 - Test voltage at air discharge - Test voltage at contact discharge Interference immunity to cable-borne interference on the supply lines acc. to IEC 61000-4-4 Interference immunity on signal lines acc. to IEC 61000-4-4 Surge immunity on the supply lines acc. to IEC 61000-4-5 500 V DC between 24 V DC and 5 V DC 6ES7 214-1AE30-0XB0 500 V DC between 24 V DC and 5 V DC 6ES7 214-1HE30-0XB0 500 V DC between 24 V DC and 5 V DC

Yes 8 kV 6 kV

Yes 8 kV 6 kV

Yes 8 kV 6 kV

Yes Yes

Yes Yes

Yes Yes

Yes

Yes

Yes

Immunity against conducted interference induced by high-frequency fields Interference immunity against high- Yes frequency radiation acc. to IEC 61000-4-6 Emission of radio interference acc. to EN 55 011 Emission of radio interferences acc. to EN 55 011 (limit value class A) Emission of radio interference acc. to EN 55 011 (limit value class B) Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Relative humidity - Permissible range (without condensation) at 25 C

Yes

Yes

Yes; Group 1 Yes

Yes; Group 1 Yes

Yes; Group 1 Yes

0.3 m; five times, in dispatch package -40 C to +70 C 95%

0.3 m; five times, in dispatch package -40 C to +70 C 95%

0.3 m; five times, in dispatch package -40 C to +70 C 95%

Siemens ST 70 2011

4/27

Siemens AG 2011

SIMATIC S7-1200
Central processing units
CPU 1214C

Technical specifications (continued)


6ES7 214-1BE30-0XB0 Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - Permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure - Permissible operating height Pollutant concentrations - SO2 at RH < 60% without condensation Environmental requirements Operating temperature Min. Max. Vertical installation, min. Vertical installation, max. Horizontal installation, min. Horizontal installation, max. Storage/transport temperature Min. Max. Air pressure Operation, min. Operation, max. Storage/transport, min. Storage/transport, max. Relative humidity Operation, max. Vibrations Vibrations Operation, checked according to IEC 60068-2-6 Shock test checked according to IEC 60068-2-27 Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK cULus FM approval Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0

0C to 55C horizontal mounting, 0C to 45C vertical mounting 5 C to 55, 3 C/minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free

5C to 55C, 3C / minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free

0C to 55C horizontal mounting, 0C to 45C vertical mounting 5C to 55C, 3C / minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free

0 C 55 C 0 C 45 C 0 C 55 C -40 C 70 C 795 hPa 1 080 hPa 660 hPa 1 080 hPa 95 %; no condensation 2G wall mounting, 1G DIN rail Yes

0 C 55 C 0 C 45 C 0 C 55 C -40 C 70 C 795 hPa 1 080 hPa 660 hPa 1 080 hPa 95 %; no condensation 2G wall mounting, 1G DIN rail Yes

0 C 55 C 0 C 45 C 0 C 55 C -40 C 70 C 795 hPa 1 080 hPa 660 hPa 1 080 hPa 95 %; no condensation 2G wall mounting, 1G DIN rail Yes

Yes; IEC 68, Part 2-27 half-sine: Strength of the shock 15 g (peak value), duration 11 ms Yes Yes Yes Yes Yes

Yes; IEC 68, Part 2-27 half-sine: Strength of the shock 15 g (peak value), duration 11 ms Yes Yes Yes Yes Yes

Yes; IEC 68, Part 2-27 half-sine: Strength of the shock 15 g (peak value), duration 11 ms Yes Yes Yes Yes Yes

110 mm 100 mm 75 mm 455 g

110 mm 100 mm 75 mm 415 g

110 mm 100 mm 75 mm 435 g

4/28

Siemens ST 70 2011

Você também pode gostar