Você está na página 1de 5

Marking and Measuring Tool Basics - Rockler.

com

Home | My Account | Order Status | Wish List | Shopping Cart Your source for woodworking tools, hardware, plans and more!

800-279-4441 code V6768


Home Articles Marking and Measuring Tool Basics

Marking and Measuring Tool Basics


Search by Keyword or Item Number

Hardware Tools Wood Products Plans, Books, CD's, DVD's and Videos Finishing, Sanding and Glues New Products Sale & Closeouts Complete Product Index Articles

If you're like most woodworkers, you've spent a lot of time picking out the best woodworking machinery, hand planes, chisels, scrapers, rasps, clamps and all manner of specialized jigs, tools and accessories that help make your work more accurate and go more smoothly. In the process, have you given much thought to the most fundamental tools in your shop - your marking and measuring tools?

Request a Catalog

Home Office Entertainment Centers Kitchen Furniture For Your Shop Small Projects Outdoor Deck Enhancements

It's worth taking stock of your marking and measuring tool kit. Most of the common problems in woodworking - joints that fit badly, out of square frames First Name: and casework, etc.- can be traced back to marking and measuring errors. And the majority of marking and measuring errors are rooted in a simple matter of Email format: using the wrong marking and measuring tools. In short, a tape measure just Html wasn't designed for making the close-tolerance measurements that many Store nearest you: woodworking projects require. In this article we'll take a look at a few of the most common marking and measuring tasks in woodworking and at some of None the tools that make the process easy, intuitive and accurate. Then, to help you get set up with a basic kit, we'll pick out a few essentials from Rockler's broad selection of marking and measuring tools. Measuring and Marking Linear Dimensions In most woodworking projects, measuring and marking linear dimensions is the first crucial step, and depending on the project, it can make for some exacting work. In projects that involve intricate joinery and small, closefitting parts, measuring and marking errors as small as a few 100ths of an inch can turn up later as gaps in joints, misaligned parts and a host of other less-than-appealing results. Measuring from point "A" to point "B" is a simple process, but your results still depend on how accurately you are able to translate a measurement into a physical mark on a piece of wood. If you've ever tried to hold a tape measure flat on a board while you accurately mark off a measurement, you know that just getting a clearly defined mark in exactly the right spot can be a surprising challenge. For precise measuring and marking, the tool you use needs to be readable and, of course, accurately calibrated. Going beyond that, the best distance measuring tools offer a little help in getting the mark in the right place. Incra Precision Marking Rules are famous for their accuracy, lay flat, and have an easy-to-read scale. But what makes them the tool of choice for linear

E-mail Address:

Rockler Wundercote Finish

Stay informed! Sign up for our Newsletter Request a Catalog Rockler Visa Credit Card

Sure-Loc Miter Gauge & Fence with Flipstop

file:///C|/Documents and Settings/Ed Wafford/My Documents/Woodworking/display_article.cfm.htm (1 of 5)9/5/2006 1:33:36 PM

Marking and Measuring Tool Basics - Rockler.com

Submit a New Product Idea

measuring is that they make it virtually impossible to put a mark in the wrong place. Incra rules are made with micro fine guide holes positioned at 1/32'' increments so that, used in conjunction with a mechanical pencil or a metal scribe, you'd really have to try hard to put a measurement mark anywhere other than exactly where it's supposed to be. Special features of some tools further simplify one of the most common measuring tasks in woodworking - measuring and marking a distance from an edge. Tools like the Incra Precision T-Rule and Precision Bend Rule take care of positioning "point A" in the "point A to B" measuring formula while still offering the famous Incra accuracy and easy-to-use design. All that's left for the woodworker to make a perfectly positioned mark at a precise distance from an edge is to get the scribe or mechanical pencil in the right guide hole and
Rockler Lift FX with Rockler Exclusive Tabletop & Fence

make a mark.

Measuring Squareness When you put a square on the end of a board to check a cut, you're trusting the "known" 90 degree angle of the square to tell you something about the piece of wood. But how square is a square? Some manufacturers tell you. Crown Hand Tools' rosewood and brass Try-Miter Square is manufactured in accordance with British Standard 3322, which means that it is accurate within a tolerance range of .01 mm/cm, or a little over 2 thousandths of an inch over its 6'' blade. Part of the benefit of knowing the tight tolerance range of the square you are using is knowing that it is manufactured in accordance with a standard. A good many squares on the market don't boast a manufacturing standard at all. Do fractions of a degree really matter? Often, inaccuracies in angle measurements that you are not even aware of multiply in accordance with the number of slightly off-square marks and cuts you make over the course of a project. When you are joining a large number of parts a tenth of a degree here and a tenth of a degree there really starts to add up. Remember, too, that you'll use a square to check the angle of your table saw blade and miter saw fence alignment. Slightly off-square angle settings on these tools are multiplied by two every time you make a joint or join two boards and can noticeably affect the flatness of edge glue-ups and miter joints. The Crown try-miter square is especially handy because it also allows you to check and mark the second most common angle in woodworking - 45 degrees. A combination square takes that versatility and adds to it with a graduated scale and a blade that can be adjusted and locked into position to gauge depth or distance relative to the edge of a material. The combination square was borrowed from the machinist's tool chest years ago, and because of its all-around usefulness, it remains the "workhorse" square in most woodworking shops. Angles Other than 90 and 45 Degrees 90 and 45 degree angles may be the most common in woodworking, but they're not the only ones that come up. For marking angles
file:///C|/Documents and Settings/Ed Wafford/My Documents/Woodworking/display_article.cfm.htm (2 of 5)9/5/2006 1:33:36 PM

Marking and Measuring Tool Basics - Rockler.com

other than 90 and 45 degrees, most woodworkers use a sliding bevel, or "T-bevel." The T-bevel's sliding blade is infinitely positionable and has the added benefit of giving you four possible handle-to-blade angle orientations when the tool is set up in the "T" shape (with some of the blade on either side of the handle). If you're shopping for a T-bevel, it's important to look for one that has a good lock down mechanism so that you don't run the risk of accidentally moving the angle setting while you're using the tool. This classic example by Crown with a rosewood body and steel blade cinches down more than well enough to hold a setting for as long as you need it to. Measuring Angles A T-bevel is strictly an angle marking tool; it doesn't' tell you anything about the measurement of the angle. For that you need an angle measuring tool, and there you have a few choices. But to simplify matters, we can divide angle measurement into two basic tasks. In general, you'll either want to set a tool or make a mark at a known angle, or you'll want to know the angle measurement of an existing angle, like the angle of a corner where two walls meet. Angle measurement tools are usually designed to work best for one task or the other. For cases where you need to set up a marking tool - like a T-bevel - with a known angle, the Mastergage Universal Angle Guide is about as good as it gets. The guide is laid out with a computer-guided laser etched angle scale in 1/2 degree increments on heavy gauge aluminum and makes it easy to transfer angle measurements to a T-bevel with dead-on accuracy. A tool that gives you accurate angle settings quickly and easily, like the Universal Angle Guide, is indispensable in working with the odd angles that turn up in complicated joinery projects or in any project where corners meet at other than the "usual" angles. On the other hand, if you need an accurate measurement of an existing angle, you won't do better than the Starrett Protractor / Angle Finder. The tool is calibrated to read both inside and outside corners and quickly gives you not only the angle of the corner, but also offers the correct miter setting for your saw. Starrett is one of the most trusted names in calibration and measurement tools, so you can be confident that the Protractor / Angle Finder's precision matches its speed. A tool like the Starrett angle finder is an essential angle measurement tool for fitting your work into the real world, which, as anyone who's ever installed cabinets, crown molding or any kind of trim will tell you, isn't always laid out in perfect 90 degree angles. Measuring Depth, Gap and Thickness Often, woodworking projects require that you measure a short distance with extreme accuracy. Fine tuning the depth of a rabbet, checking the width of a dado and measuring the thickness of veneer or stock all call for a tool that will give you extremely precise short distance readings. For these necessarily finicky measuring tasks, you really can't go wrong with a digital caliper. The digital caliper is the latest advancement
file:///C|/Documents and Settings/Ed Wafford/My Documents/Woodworking/display_article.cfm.htm (3 of 5)9/5/2006 1:33:36 PM

Marking and Measuring Tool Basics - Rockler.com

in a precision measuring tool that migrated from the machinist's tool kit into the wood shop years ago. They're equipped with sets of jaws that measure inside and outside dimensions with accuracy in the 1000ths of an inch range, and a probe that slides down from the bottom of the tool to gauge depth with equal precision. Calipers are also available in models that have a dial readout and a standard calibrated scale, but the modern digital variety is so easy to use and read that most woodworkers find the slight upcharge for the feature well worth the price. Putting Together a Basic Measuring and Marking Kit At this point, we've just scratched the surface of marking and measuring. There are many other truly useful marking and measuring tools, many of which are extremely helpful in specialized measuring tasks. Wood turners will want to take a look at the J-Square Center Finder and a Wood Turner's Caliper Set. If your projects have you marking off a lot of curved shapes, then you might want to add a set of French Curves or a Flexible Curve to your marking tool collection. And we'd also like to point out that tools that help you get the most accurate results from your woodworking machinery, like calibration tools and precision fences and miter gauges, are in essence measuring tools. But our purpose is to help you get set up with the marking and measuring tools that we think are "standard equipment" for any woodworking operation. Here are the eight tools that will cover the most common and important marking and measuring tasks in woodworking: 1. Tape Measure. Did we give you the impression that we don't like tape measures? A tape measure will always be an irreplaceable woodworking tool.

2. Incra Precision Marking Rule. As we've pointed out, you can't beat this tool for precision measuring and marking. 3. Incra Precision T-Rule. Measuring and marking a distance from an edge is one of the most common tasks in woodworking. The Incra T-Rule is the tool for measurements up to twelve inches. 4. Cabinetmaker's Pencil Set. A quality graphite pencil that sharpens to a micro-fine point for accurate marking. 5. Try -Miter Square or Engineer Square. Judging squareness is so central to woodworking that we think every shop should have a tool that does it accurately.

file:///C|/Documents and Settings/Ed Wafford/My Documents/Woodworking/display_article.cfm.htm (4 of 5)9/5/2006 1:33:36 PM

Marking and Measuring Tool Basics - Rockler.com

6. Combination Square. One of the most versatile marking and measuring tools ever introduced into woodworking. 7. T-Bevel. For years and years the T-bevel has been the tool for marking angles other than 90 degrees. 8. Mastergage Universal Angle Guide or Incra Precision Protractor. Either tool will give you the angle measurement precision you need for complex projects. 9. Starrett Protractor / Angle Finder. The best tool for dead-on accurate angle readings. 10. Digital Caliper. There really isn't any other way to get precise measurements of the depth of your rabbets, the width of your dadoes or the thickness of your stock.

DAILY DEALS FOR June 18, 2006


Anti-Fatigue Mat

$9.99 $4.99 $9.79

50% OFF! 17% OFF! 30% OFF!

Dust Collection Basics - Book

Magnetic Mounting Tray

"The Nordstrom's of woodworking!"


- Customer Comment - 12/26/2004

See more...
HARDWARE | WOODWORKING TOOLS | WOOD PRODUCTS | WOODWORKING PLANS AND BOOKS | WOOD FINISHING AND SANDING HOME PAGE | HELP | PRIVACY STATEMENT | CONTACT | ABOUT US | CAREERS | AFFILIATES | ROCKLER WOODWORKING BLOG

ALSO VISIT:

Interested in learning about woodworking? See Woodworking Schools.

Copyright 2006 , Rockler Companies, Inc. This is a Secure Shopping Site


web1

file:///C|/Documents and Settings/Ed Wafford/My Documents/Woodworking/display_article.cfm.htm (5 of 5)9/5/2006 1:33:36 PM

Você também pode gostar