Escolar Documentos
Profissional Documentos
Cultura Documentos
Geometry Rep - Predefined representation that displays the part in the geometric form.
Master Rep - Representation that displays the part in the default form
Default Rule - Determines how the system should classify features that are added to the part.
Default - Returns the feature to the default rule for the rep.
Page 4
Tutorial Activity
** To begin, we will open an existing part called core. **
Page 5
ADVANCED ASSEMBLY 2 (AA2_WILDFIRE3) ** We will now create a simplified rep of the part called plain_core which will show the motor core piece without some of its features. **
SIMP REP tab: #New, name:[plain_core], <Enter> SIMP REP tab: #Edit, #Redefine EDIT METHOD Menu: #Features FEAT INC/EXC menu: #Exclude, select the 4 large cuts, large center hole, and the two slots, #Done EDIT METHOD menu: #Done Return
** The part should appear similar to the following image. **
Page 6
VIEW MANAGER Menu: Right click Master Rep, #Set Active, #Close
** This should bring you back to the original display of the part. **
** We will now create a second simplified rep that shows a cutaway of the motor core. **
** Make sure to turn on the datum planes so that they are showing. **
Page 7
VIEW Menu: #View Manager, #New, name: [cut_away], <Enter> EDIT METHOD Menu: #Work Region SOLID OPS Menu: #Extrude, #Solid, #Done DASHBOARD: #Placement, #Define, select front face (shown in following image), #Sketch
SKETCHER MODE: Sketch a horizontal line through the center of the core with the endpoints aligned to the outside edge (see following image).
Page 8