Escolar Documentos
Profissional Documentos
Cultura Documentos
1-877-GO ALTEC
9002-00017 09/05
Description
8 diameter 9 diameter 10 diameter 12 diameter 14 diameter 16 diameter 18 diameter 20 diameter 22 diameter 24 diameter 30 diameter
P/N 700-90063 & P/N 70090091, and a pilot bit P/N 700-90177
36 diameter
1-877-GO ALTEC
2
Utility Carbide Augers 2 1/2 and 2 5/8 hex hubs, overall length of 104 with 60 of ight, carbide teeth P/N 700-90063 & P/N 700-90091 and a P/N 8994-08330 pilot bit.
Description 8 diameter 9 diameter 10 diameter 12 diameter 14 diameter 16 diameter 18 diameter 20 diameter 22 diameter 24 diameter 30 diameter 36 diameter
2 1/2 hex hub P/N 9000-54600 P/N 9000-54601 P/N 9000-54602 P/N 9000-54603 P/N 9000-54604 P/N 9000-54605 P/N 9000-54606 P/N 9000-54607 P/N 9000-54608 P/N 9000-54609 P/N 9000-54610 P/N 9000-54611
2 5/8 hex hub P/N 9000-54620 P/N 9000-54621 P/N 9000-54622 P/N 9000-54623 P/N 9000-54624 P/N 9000-54625 P/N 9000-54626 P/N 9000-54627 P/N 9000-54628 P/N 9000-54629 P/N 9000-54630 P/N 9000-54631
P/N 700-90091, P/N 70090095, and P/N 0700-90061
with 700-09002 Carbide Tipped Pilot Utility Carbide Augers, 2 1/2 and 2 5/8 hex hubs, overall length of 104 with 60 of ight, carbide teeth P/N 700-90063 and P/N 700-90091 and a P/N 700-09002 pilot bit .
Description
16 diameter 18 diameter 20 diameter 24 diameter
2 5/8 hex hub P/N 9000-54415 P/N 9000-54416 P/N 9000-54417 P/N 9000-54418 P/Ns 700-90063, 700-90091, and 700-09002
1-877-GO ALTEC
4
1-877-GO ALTEC
6
Adapters
P/N 9000-32419 P/N 9000-32984 P/N 9000-32609 P/N 9000-99797 P/N 9000-96171 P/N 9000-34797 2 1/2 hex hub x 2 hex stem 2 1/2 hex hub x 2 5/8 hex stem 2 hex hub x 2 1/2 hex stem 2 5/8 hex hub x 2 1/2 hex stem 2 hex hub to 2-1/2 hex hub 3-1/2 female to 3 male square
Couplers
P/N 9000-53400 P/N 9000-53402 P/N 9000-53403 2 x 2 hex coupler 2-1/2 x 2-1/2 hex coupler 2-5/8 x 2-5/8 hex coupler
This carbide faced tooth for the step rock auger is best used in solid, non-fracturable rock.
P/N 700-09008 P/N 700-90062 PFC-5
P/N 700-90095
P/N 700-90095 P/N 700-90096 Combination dirt/chisel point, installs rib up (1851)
This replacement tooth for the spiral rock auger is carbide tipped and best utilized in nonfracturable rock with no impact.
P/N 700-90181 604-C
P/N 700-90096 P/N 700-90063 Tungsten carbide (round) High abrasion, frozen soil, low impact (1656) P/N 700-90063 P/N 700-90091 Carbide gage, highly abrasive soil, frozen ground (1658) P/N 700-90091
P/N 700-90155
Tungsten carbide (at), high abrasion, frozen soil, low impact (1654) P/N 700-90155
P/N 700-90229
Ridge breaker carbide gauge tooth, high abrasion, frozen soil, low impact (RB-58) P/N 700-90229
Installation Tools Ribd-Rubr-Lok used for installing auger teeth. Available in 4 ft. length.
P/N 700-90060
P/N 700-90228
Ridge Breaker Carbide tooth, high abrasion, frozen soil, low impact (RB-56) P/N 700-90228
P/N 700-90097
1-877-GO ALTEC
8
72
1-877-GO ALTEC
10
This 5 diameter carbide tipped drill head is best used in concrete, stone, and frozen ground.
P/N 700-09002 50-TCH-171
This pilot is best utilized in consolidated rock and abrasive soil where impact is minimal.
P/N 700-90176 FH-205C
This replacable tooth pilot bit is best used in compacted soil and fracturable rock.
P/N 700-90123 P-1650
This hardpan pilot, with bit, bolt & nut is best used in dirt. This pilot bit does not need an adapter to install into the head.
P/N 7163-02018 FH-105
This cone pilot bit installs into the head without an adapter. Used best in drilling dirt.
P/N 9000-31730 C-120
This replaceable carbide tooth pilot bit is best used in consolidated rock and abrasive soil where impact is minimal.
P/N 8994-08330 P-1656
These pilot bit adapters come with a bolt & nut. P/N 700-90093 is the standard pilot bit used, P/N 7163-02107 is a short pilot bit.
P/N 700-90093 P/N 7163-02107 PA-183-L PA-182-L (shown)
11
Auger Accessories
The Altec Dirt Sling is a at blanket that is made of heavy duty 22 oz. vinyl and strengthened with heavy duty 2 webbing sewn around the edges. This tarp, which attaches to winches, acts as a sling and makes lling in dirt around poles, transporting crushed rock, sand, dirt, wet cement, etc. quickly and simply. The dirt sling maintains clean work areas and transport vehicles. Tools and other materials will be easy to nd when used as a blanket, as it will sit atop weeds, grass, mud, or snow. When a job is incomplete, dirt can be transported from the worksite to a dry area to be replaced when the job is nished. As a safety device, the dirt sling reduces injuries by eliminating the demanding forces associated with physical labor and repetitive movements. This innovative sling essentially does the work for you and makes the job cleaner, easier, safer, and much more productive.
6x6 Covers 36 sq ft; Holds 14 cu ft; Rated lift 700 lbs or 1/4 cu yd dirt; Poles to 35 small hand dig 7x7 Covers 49 sq ft; Holds 22 cu ft; Rated lift 1,100 lbs or 3/8 cu yd; All poles to 55 8x8 Covers 64 sq ft area; Holds 34 cu ft; Rated lift 1,400 lbs or 1/2 cu yd dirt; All poles P/N 9000-66666 P/N 9000-66667 P/N 9000-66668 P/N 9000-66669 7 ft triangle blanket 6x6 ft square blanket 7x7 ft square blanket 8x8 ft square blanket
P/N 234-80004 P/N 234-80005 P/N 234-11001 P/N 234-11024 102 long (86) wire rope 114 long (96) wire rope
10 Ft Nylon 9 Ft Nylon
The Auger Bag acts as a dirt cover, preventing mud and dirt from falling into the truck bed as well as preventing rocks and dirt from hitting passing cars. This bag is made from heavy duty vinyl which allows for long-term use.
P/N 9000-99718 Auger Bag
Contact your nearest Altec location for assistance with all part and accessory needs.
1-877-GO ALTEC