Escolar Documentos
Profissional Documentos
Cultura Documentos
ABDUL MUHEEM M.Pharm, IInd sem., Department of Pharmaceutics Faculty of Pharmacy, Jamia Hamdard
Content
Definition Introduction Colloidal systems Formulation additives Commercial NEs Formulations Advantages Methods of preparation Techniques of preparation
High -pressure homogenization Microfluidization Phase inversion temperature technique Titration method
Characterisation of microemulsion
Abbreviations
NE
nanoemulsion
SME-sub-micron emulsion o/w- oil in water w/o- water in oil PCMX parachlorometaxylenol TEWL- trans epidermal water loss
Definition
Nanoemulsions can be defined as oil-inwater (o/w) emulsions with mean droplet diameters ranging from 50 to 1000 nm. Synonyms: sub-micron emulsion and miniemulsion. Usually SMEs contain 10 to 20 per cent oil stabilized with 0.5 to 2 per cent egg or soyabean lecithin.
Introduction
NEs are a group of dispersed particles used for pharmaceutical and biomedical aids and vehicles that show great promise for the future of cosmetics, diagnostics, drug therapies, and biotechnologies Due to their small droplet size NEs possess stability against sedimentation or creaming with Ostwald ripening forming the main mechanism of NE breakdown.
Internal structures depend on relative component amounts, concentrations and other characteristics. The relative oil and water domains that form in nanoemulsion systems are usually so small (about 10-20 nm or less in diameter) that they do not scatter light.
Requires a lower surfactant concentration for its formation Nanoemulsions are generally expensive
Nanoemulsions
Formulation additives
A Typical Formulation
Advantages
NEs have a much higher surface area and free energy than macro emulsions that make them an effective transport system. NEs do not show the problems of inherent creaming, flocculation, coalescence, and sedimentation, which are commonly associated with macroemulsions. NEs can be formulated in variety of formulations such as foams, creams, liquids, and sprays.
Advantages
NEs
are non-toxic and non-irritant, hence can be easily applied to skin and mucous membranes. Since NEs are formulated with surfactants, which are approved for human consumption (GRAS), they can be taken by enteric route. NEs do not damage healthy human and animal cells, hence are suitable for human and veterinary therapeutic purposes.
Reduction in dose Better profiles of drug absorption Protection of drug(s) from the hostile environment of the body
Techniques of preparation
a.
b.
c.
High-pressurehomogenization
This
technique makes use of high-pressure homogenizer/pist on homogenizer to produce NEs of extremely low particle size (up to 1nm)
MICROFLUIDIZATION:
It involves the use of device that is micro fluidizer It uses high-pressure positive displacement pump of (500-20000)psi, which forces the product through the interaction chamber, which consists of small channels called micro channels. The product flows through the micro channels on to an impingement area resulting in very fine particles of submicron range. The two solutions (aq. Phase and oily phase) are combined together and processed to obtain a stable nanoemulsion.
Microfluidization
www.ttlindia.com/images/microfluidics1.jpg
Characterization of Nanoemulsion
transmission
electron microscopy,
NE droplet size analysis, viscosity determination, refractive index, in vitro skin permeation studies,
Characterization of Nanoemulsion
skin irritation test, in vivo efficacy study, thermodynamic stability studies, and surface characteristics.
overcome formulation
the
problem
of
metastable
Selected formulations were centrifuged at 3500 rpm for 30 minutes Heating and cooling cycle Six cycles between refrigerator temperatures of 4C and 45C for 48 hours were done Freeze-thaw cycle test done for the formulations between 21C and +25C.
droplet size of the nanoemulsion is determined by photon correlation spectroscopy The formulation (0.1 mL) is dispersed in 50 mL of water Gently mix by inverting the flask. Measurement is done using a Zetasizer 1000 HS. Light scattering is monitored at 25C at a 90 angle
morphology nanoemulsion
and
structure
of
the
the nanoemulsion formulation is diluted with water (1/100). A drop of the diluted nanoemulsion is directly deposited on the holey film grid and observed after drying
Viscosity Determination
The viscosity of the formulations (0.5 g) can be determined without dilution using a Brookfield DV III ultra V6.0 RV cone and plate rheometer at 25 0.5C. one software calculations used is for the Rheocalc viscosity V2.6.
Applications of Nanoemulsions
Use
of nanoemulsions in cosmetics
Antimicrobial nanoemulsions Prophylactic in bio-terrorism attack Nanoemulsions as a mucosal vaccines Nanoemulsion as non-toxic disinfectant cleaner
Applications of Nanoemulsions
Nanoemulsion
in the treatment of various other disease conditions Nanoemulsion formulations for improved oral delivery of poorly soluble drugs Nanoemulsions as a vehicle for transdermal delivery Self-nanoemulsifying drug delivery systems
Applications of Nanoemulsions
Nanoemulsions in cell culture technology Nanoemulsion in cancer therapy and in targeted drug delivery Solid self-nanoemulsifying delivery systems as a platform technology for formulation of poorly soluble drugs
The disinfectant formulation is made up of nanospheres of oil droplets #106 mm that are suspended in water to create a NE requiring only miniscule amounts of the active ingredient, PCMX (parachlorometaxylenol). The nanospheres carry surface charges that efficiently penetrate the surface charges on microorganisms' membranes-much like breaking through an electric fence. Rather than "drowning" cells, the formulation allows PCMX to target and penetrate cell walls. As a result, PCMX is effective at concentration levels 1-2 orders of magnitude lower than those of other disinfectants; hence, there are no toxic effects on humans, animals, or the environment.
to deliver either recombinant proteins or inactivated organisms to a mucosal surface to produce an immune response. An influenza vaccine and an HIV vaccine, can proceed to clinical trials. The NE causes proteins applied to the mucosal surface to be adjunted and it facilitates uptake by antigen-presenting cells. This results in a significant systemic and mucosal immune response that involves the production of specific IgG and IgA antibody as well as cellular immunity.
Antimicrobial nanoemulsions
The NE has a broad-spectrum activity against bacteria (e.g. E. coil, Salmonella, S. aureus), enveloped viruses (e.g. HIV, Herpes simplex), fungi (e.g. Candida, Dermatophytes), and spores (e.g. anthrax). The NE particles are thermodynamically driven to fuse with lipid-containing organisms.
NEs support the skin penetration of active ingredients and thus increase their concentration in the skin. Another advantage is the small-sized droplet with its high surface area allowing effective transport of the API to the skin. Have own bioactive effects. This may reduce the trans-epidermal water loss, indicating that the barrier function of the skin is strengthened. NEs are acceptable in cosmetics because there are no inherent creaming, sedimentation, flocculation, or coalescence that are observed with macroemulsions.
cells of interest are labeled in culture using a perfluorocarbon nanoemulsion Labeled cells are introduced into a subject and tracked using 19F MRI or NMR spectroscopy widely applied to studies of inflammation, cellular regenerative medicine, and immunotherapy.
Low systemic absorption Site-specificity and increased drug levels at injured tissues Reduced toxicity Improved pharmacological activity
Parenteral Delivery
In order to increase the solubility of the drug, To reduce drug toxicity, To reduce hypersensitivity, To reduce pain upon injection, Formulated as long circulating vehicles, Control the release rate, As drug targeting agents, Alternative formulation to long circulating vesicles, On the basis of their small size avoiding uptake by the RES, Their stability and their ease of preparation.
How the top 10 big pharmaceutical companies rank in terms of number of nano-related patents.
Conclusion
NE formulations offer several advantages for the delivery of drugs, biologicals, or diagnostic agents. Several other products for drug delivery applications such as Diprivan (propofol, astra zeneca) and Ropion (flurbiprofen) have also reached the marketplace. NEs are chiefly seen as vehicles for administering aqueous insoluble drugs, as colloidal carriers for targeted delivery of various anticancer drugs, photosensitizers, neutron capture therapy agents, or diagnostic agents. Because of their submicron size, they can be easily targeted to the tumor area. Research with perflurochemical NEs has shown promising results for the treatment of cancer in conjugation with other treatment modalities and targeted delivery to the neovasculature. It is expected that further research and development work will be carried out in the near future for clinical realization of these targeted delivery vehicles.
RESEARCH PAPERS
INTRODUCTION
MATERIALS
References:
1.
Jia Xi, Qi Chang, Chak K. Chan et al, Formulation Development and Bioavailability Evaluation of a SelfNanoemulsified Drug Delivery System of Oleanolic Acid. AAPS PharmSciTech, Vol. 10, No. 1, March 2009 (# 2009).
2. Nicolas Anton & Thierry F. Nano-emulsions and Microemulsions: Clarifications of the CriticalDifferences www.springerlink.com/index/J4880Q76V1374601.pdf. 3. Shah P, Bhalodia D, Shelat P. Nanoemulsion: A pharmaceutical review. Syst Rev Pharm [serial online] 2010 [cited 2011 Mar 16];1:24-32. Available from: http://www.sysrevpharm.org/text.asp?2010/1/1/24/59509
Thank You