Você está na página 1de 32

Internal

DBS3900 NODEB Hardware Orientation

www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Upon completion of this course, you will be able to: Know application scenarios of DBS3900 Know the hardware structure of DBS3900 Know the functions of different modules Know the cables connection rules of DBS3900

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 2

DBS3900 Abbreviations
WMPT WCDMA Main Processing and Transmission Unit

WBBPb4
WRFU

WCDMA Baseband Process unit Type B


WCDMA Radio Filter Unit

UBFA
UEIU

Universal BBU Fan Unit Type A (2U)


Universal Environment Interface unit

UELP UFLP UPEU


UTRP RCU

Universal E1/T1 Lighting Protection unit Universal FE/GE Lighting Protection unit Universal Power and Environment Interface Unit
Universal Transmission Processing Unit Remote Control Unit

CPRI
AISG TMA SRXU

Common Protocol Radio Interface


Antenna Interface Standard Group Tower Mounted Amplifier Slim Receive Unit

APM

Advanced Power Module (FOR OUTDOOR)

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 3

Chapter1 General Description

Chapter2 Hardware Introduction

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 4

DBS3900 Overview
DBS3900 system consists of:

BBU3900 Baseband Unit RRU3804 or RRU3801E Remote Radio Unit Antenna and feeder system
Antenna

RRU 3804 or 3801E

TMA RF jumper

Feeder

-48V DC power -48V/ 24V DC power

Grounding cable

Power cable
BBU3900

RF jumper

Grounding cable Power cable

Trunk cable RNC

Fiber or CPRI high-speed signal cable

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 5

BBU3900 in a Standard 19-Inch Cabinet


Application scenario 1

Launch 3G services on the basis of a 2G site

2G BTS RF Cable

Benefit of this Application Scenario:


Can reside in any standard 19-inch-wide and 2-U-high cabinet
Can be installed on the metal pole and close to the antenna The BBU3900 and RRU can share the power supply and antenna systems of the 2G network Enables operators to launch 3G services on the existent 2G network at a very low cost

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 6

DBS3900 Integrated Application

Application scenario 2 Launch a new 3G outdoor site without an equipment room


VDF Spain: RRU on Tower

Shelter

Air-conditioner

BBU

BBU3900+RRU+APM

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 7

BBU3900 in a Indoor Cabinet


Application scenario 3:

Launch a new 3G indoor site, there is an equipment room with limited space.

RRU

RRU close to tower antenna To RNC

RRU 1U/2U RRU 1U/2U BBU RRU 1U/2U

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 8

DBS3900 Product Family


Distribute NodeB DBS3900

Remote radio unit

Remote radio unit

Baseband unit

BBU3900 RRU3804 RRU3801E

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 9

Chapter1 General Description

Chapter2 Hardware Introduction

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 10

Chapter2 Hardware Introduction Section1 Section2 BBU Hardware DBS3900 Cables

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 11

BBU3900 Module Introduction


Full configuration

Baseband unit

Typical configuration

BBU3900 Module

Mandatory boards and modulesWMPT, WBBP, UBFA, and

UPEU

The optional boards are the UELP, UFLP, UTRP, and UEIU. All rights reserved Page 12

HUAWEI TECHNOLOGIES CO., LTD.

BBU3900 Module Introduction

Slot 16

SLOT0 SLOT1 SLOT2 SLOT3

SLOT4 SLOT5 SLOT6 SLOT7

Slot 18

B F

WBBP

UTRP

PEU/ EIU PEU/ EIU

WBBP
WBBP WBBP

UTRP
WMPT WMPT

Slot 19

Active and standby slot definition only for UTRP board

Slot boards definition

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 13

BBU Module --- WMPT Board


IP transmission on Electrical Port :RJ45 Loading Testing:USB GPS antenna: SMA

LEDs Commissioning:RJ45 IP transmission Optical signals: SFP


Main Functions

4E1:DB26

Board number

maximum is 2 for one BBU mandatory board working in active and standby mode

Providing OM functions Controlling other boards in the system and providing the reference clock Providing USB ports for automatic NodeB

upgraded
Providing transmission port for Iub interface Providing OM channels
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 14

BBU Module --- WMPT Board


LEDs of running status of WMPT:

Label RUN

Color Green

Status ON OFF 1s ON, 1s OFF 0.125s ON, 0.125s OFF

Description The board has power input, yet the board is faulty. The board has no power input. The board is running as configured. The software is being loaded to the board, or the board is not in use. The board is reporting alarms and is faulty. The board is running properly. The external ports of the board are faulty. The board is in active mode. The board is in standby mode.

ALM

Red

ON OFF Blinking

ACT

Green

ON OFF

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 15

BBU Module --- WMPT Board

LED LEDs beside the FE1 and FE0 optical port

Color Green

Status ON OFF

Description The connections are functional. The connections are faulty. There is ongoing data transmission. There is no data transmission.

Yellow

Blinking OFF

LEDs beside the ETH port

Green
Yellow

ON
OFF Blinking OFF

The connections are functional.


The connections are faulty. There is ongoing data transmission. There is no data transmission.

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 16

BBU Module --- WMPT Board


Two DIP Switches :

SW1 for setting the E1/T1 working mode SW2 for setting the protection ground for the E1.
Settings of SW1 Bit T1 Mode 120-ohm E1 Balanced Mode OFF OFF ON ON 75-ohm E1 Unbalanced Mode ON ON ON ON

1 2 3 4

ON ON OFF OFF

Settings of SW2 Bit 75-ohm E1 Unbalanced Mode Description

1
2 3 4

ON
ON ON ON

The RRING is for connected to the protection ground.

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 17

BBU Module --- WBBPa Board


CPRI 0 ~2 (1.25G-2.5G): SFP LEDs

Board number mandatory, maximum is 6


Main Functions

Providing the CPRI interface for communication between the BBU and the WRRU or WRFU Processing uplink and downlink baseband signals and support HSUPA and HSDPA function Supporting 1+1 backup of the CPRI interface According to the board chip processing capability, WBBP module will include seven specifications. Current WBBP is the A version, called WBBPa.
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 18

BBU Module --- WBBPa Board


LED of running status of board :
Label RUN Color Green Status ON Description The board has power input, yet the board is faulty.

OFF
1s ON, 1s OFF 0.125s ON/OFF ACT Green ON

The board has no power input or is faulty.


The board is running properly. Software is being loaded to the board. The board is running properly.

OFF
ALM Red OFF ON Blinking CPRI0 CPRI1 CPRI2 Red Green OFF

The board is not in use.


The board is running properly. The board has alarms on hardware and it should be replaced with a new one. The external ports of the board are faulty and should be handled. normal

ON
Blinking at 2 Hz Blinking at 0.5 Hz

The CPRI links over the optical cable are faulty.


The RRU on the CPRI link is faulty in hardware. The RRU on the CPRI link is faulty in the antenna system connection.

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 19

BBU Module --- WBBP Board


There are 2 kinds of Baseband card, WBBPa and WBBPb.

Board Type WBBPa WBBPb1 WBBPb2 WBBPb3 Cell 3 cells 3 cells 3 cells 6 cells

Uplink R99 /HSUPA CE 128 64 128 256

Downlink R99 CE 256 64 128 256 HSDPA Capacity 45 HS-PDSCH codes 45 HS-PDSCH codes 45 HS-PDSCH codes 90 HS-PDSCH codes 90 HS-PDSCH codes

HSDPA throughput 15Mbps 15Mbps 15Mbps 30Mbps

HSUPA throughput 6Mbps 6Mbps 6Mbps 12Mbps

WBBPb4 6 cells

384

384

30Mbps

12Mbps

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 20

BBU Module --- UFAN Board

Board number mandatory, maximum is 1 Main Functions

Controlling the fan speed Reporting the fan status to the WMPT

Detecting the temperature of the fan board


Label STATE Color Green Status 0.125s ON, 0.125s OFF 1s ON, 1s OFF Red ON Description The module is not registered, and no alarm is reported.
The board is running properly.

The module is reporting alarms.

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 21

BBU Module --- UPEU Board

Panel of the UPEA


(USE FOR 3G PHASE 3)

Panel of the UPEB

-48V to +12V

+24V to +12V

Board number mandatory, maximum is 2, 1+1 backup Main Functions

Converting -48 V or +24 V DC power input to +12 V DC power that is supported by boards Reporting alarms related to input and output under voltage Providing transmission ports for RS485 signals and 8 dry contact alarm signals

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 22

BBU Module --- UPEU Board


LED: The UPEU has one LED, indicating the running status of the board.

Label RUN

Color Green

Status ON OFF

Description The board is running properly. The board has no power input, or the board is faulty.

Socket and Port: The UPEU has one socket and four ports.

Label
PWR EXT-ALM1 EXT-ALM0 MON1

Quantity
1 1 1 1

Connector Type
3V3 RJ45 RJ45 RJ45

Function
DC power input Transmitting dry contact alarm signals Transmitting RS485 environment monitoring signals

MON0

RJ45

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 23

BBU Module --- UEIU Board


Board number:

maximum is 1

The UEIU Functions

Connecting to an external monitoring device and transmitting RS485 signals to the WMPT

Connecting to an external alarm device and transmitting dry contact alarm


signals to the WMPT
Port : The UEIU has four ports.

Label MON0 MON1 EXT-ALM0 EXT-ALM1

Connector Type RJ45 RJ45 RJ45 RJ45

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 24

BBU Module --- UELP Board


UELP: The universal E1/T1 lightning protection (UELP) unit is a universal E1/T1

The UELP can be optionally installed in the SLPU or the BBU. Each UELP supports the surge protection of 4-way E1/T1 signals. DB25

DB26

E1 Connection:
E1 E1

Indoor DDF

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 25

BBU Module --- UELP Board


DIP Switch: The UELP has one DIP switch, which is used to select whether the

receive terminal is grounded. The DIP switch has four bits.

DIP Switch S1

DIP Status 1 ON OFF 2 ON OFF 3 ON OFF 4 ON OFF

Description Used for the 75 unbalanced mode Used for other modes except the 75 unbalanced mode

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 26

BBU Module --- UFLP Board


UFLP: The universal FE lightning protection (UFLP) board is optionally installed in the

SLPU or BBU. Each UFLP supports 2-way FE surge protection.

IP Cable Connection.
Transmission Equipment LAN switch or Router

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 27

Chapter2 Hardware Introduction Section1 Section2 BBU Hardware DBS3900 Cables

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 28

Connections of the BBU3900 Cables

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 29

Cables --- Power Cable of the BBU3900


This describes the power cable. Either -48 V power cable or +24 V power cable

can be used, depending on the power input.


Appearance : The power cable has a 3V3 connector at one end and bare wires

at the other end. Appropriate terminals are added to the bare end on site.

1) 3V3 connecter

2) OT terminals

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 30

Cables --- Transmission Cable of BBU3900

E1 Cable

FE Cable

E1 Surge Protection Transfer Cable

FE Surge Protection Transfer Cable

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

Page 31

Thank You
www.huawei.com

Você também pode gostar