Escolar Documentos
Profissional Documentos
Cultura Documentos
Categories Of Biomass Materials Biomass better than fossil fuels A neutral source of energy Source of biomass Some of the most efficient residues How biomass works Turning biomass into electricity Generating energy from biomass Ways to produce transportation biofuels Efficiency of biomass Biomass a Profitable Energy Advantages & Disadvantages Power Plants in India
Biomass is biological material from living or recently living organisms; As an energy source, biomass can either be used directly, or converted into other energy products. Biomass is carbon, hydrogen and oxygen based. Biomass energy is derived from five distinct energy sources: garbage, wood, waste, landfill gases and alcohol fuels.
biomass maintains a
closed carbon cycle with no net increase in atmospheric CO2 levels unlike fossil fuels.
sun. Plants absorb the sun's energy in a process called photosynthesis. The chemical energy in plants gets passed on to animals and people that eat them.
Or we can say: Plants use and store carbon
dioxide (CO2) when they grow. CO2 stored in the plant is released when the plant material is burned or decays. By replanting the crops, the new plants can use the CO2 produced by the burned plants. So using biomass and replanting helps close the carbon dioxide cycle.
It is also a renewable energy because plants to
S o
B i o o m
u
r c e s
a
s
has been extracted in sugar factories and distilleries, is the king of biomass.
Bagasse leads wood as the preferred biofuel for
generating electricity.
Each year approximately 1.2 billion metric tons of
sugarcane are harvested worldwide, yielding around 350 million metric tons of bagasse.
If existing installations were modernized, bagasse could
produce much more electrical power, estimated at around 50,000 MW for power plants operating primarily on this fuel.
the rice.
Other than its utilization as a biofuel, there is no other
process for eliminating this waste, which accumulates in heaps around rice mills.
World produces around 600 million metric tons of rice
per year, approximately 120 million metric tons of rice chaff is left unused annually.
the total approx. 15000 MW of electricity could be
10
value.
11
The heat is used to boil water in the boiler, and the energy in the steam is used to turn turbines and generators.
Biomass can also be tapped right at the landfill
with burning waster products. When garbage decomposes, it gives off methane gas. Pipelines are put into the landfills and the methane gas can be collected. It is then used in power plants to make electricity.
Also used to produce ethanol, a liquid alcohol fuel.
Ethanol can be used in special types of cars that are made for using alcohol fuel instead of gasoline.
The alcohol can also be combined with gasoline.
Steam Turbine
Boiler
Boiler
Biomass
High Heat
Steam
Steam spins the turbine blades
Rotating magnets create electricity
Generating energy from biomass is also called as conversion of biomass. Various processes are employed to obtain energy from biomass. Three of them are:
1. COMBUSTION:
biomass is used as fuel to heat water to obtain high-
pressure steam. The steam is fed to a turbine linked to an alternator, which produces electricity.
The low-pressure stream given off by the turbine may
be used to supply heat to district heating networks as well as in various industrial processes: sugarcane distillation, paper-making, esterification, etc.
when waste energy is also made use of in a power
17
18
whereby a carbon source such as coal, natural gas or biomass, is broken down into carbon monoxide (CO) and hydrogen (H2), plus carbon dioxide (CO2) and possibly hydrocarbon molecules such as methane (CH4). Types of gasification: Low temperature & high temperature gasification.
Applications: Heating water in central heating, district heating or process heating applications Steam for electricity generation or motive force As part of systems producing electricity or motive force Transport using an internal combustion engine.
19
3. Pyrolysis :
Pyrolysis is the precursor to gasification, and
takes place as part of both gasification and combustion. It consists of thermal decomposition in the absence of oxygen. It is essentially based on a long established process, being the basis of charcoal burning.
Applications: Biomass energy densification for transport or storage Co-firing for heat or power Feedstock for gasification.
21
23
emission (GHG) produced by road transportation, which generates 24% of all planetary CO2 emissions.
biofuels lowers the demand for oil, and energy costs
in consequences.
Biofuels open up a avenue for using agricultural
products, helping to regulate market prices, for primary agricultural commodities, and also create jobs in rural areas.
plants with a high sugar content (sugar beet, sugarcane) or high starch content (wheat, potatoes, corn, etc.). ethyl alcohol is obtained by fermentation of the sugar or starch.
or ethanol with vegetable oils (sunflower, soyabean, etc.) and are added to diesel fuel.
26
Efficiency of biomass
The
electrical efficiency rating of transforming biomass into electrical energy is around 30% for 10 to 20 MW capacity plants.
500 MW and more with combined cycle gas turbines can only attain an electrical efficiency rating of 57%.
Regarding fossil fuels, the efficiency rating
of the biggest coal-fired plants, with an output close to 1000 MW, does not exceed 45%.
27
contribute to developing rural areas, as opposed to urban areas, because it will create sustainable activities that make use of unexplored agricultural resources and also provide access to electricity in isolated areas where the power supply is not always reliable.
Producing energy using biomass also allows for
traditional income generated by the production of electrical power will contribute to ensuring greater economic stability for agricultural producers.
29
1. In industrialized countries
When biomass materials are not the byproducts of an
existing industry (bagassse produced by sugar factories, sawdust by forestry operations), using them as biofuel results in an increase in prices.
the cost of collecting the dead wood and branches
from felled trees in forests and transforming then into wood pellets is 40-50 Euros (2500-3500 Rupees) per metric ton, whereas the cost of sawmill waste is 20 Euros (1500 Rupees)/ metric ton.
In these countries, subsides are needed to make
biomass a competitive energy. However, in contrast to other sources, biomass has a low environmental and social impact, which lower its cost over the long term.
2. In developing countries Biomass power plant investment and operating costs are lower in developing countries.
In Thailand, the installation of a 15 MW capacity
power plant costs around 1250 Euros (90000 Rupees) / kW, in comparison to 2500 Euros (180000 Rupees) / kW in Europe.
Biomass is more profitable energy because
Seedlings (2 months)
Tree Plantations
Sapling s (1 year)
7 years
3 years
Cutting
Sorting
Hauling
Loading
Chipping
Paper Mill
2. Disadvantages: Could contribute a great deal to global warming and particulate pollution if directly burned.
Still an expensive source, both in terms of
Akaltara, Chhattisgarh
Malavalli, Karnataka