Escolar Documentos
Profissional Documentos
Cultura Documentos
System
Topics
Introduction.
Components.
Displays & Indicators.
Operation.
Warnings.
What is the Monitoring System?
The Monitoring System is an electric circuit with electronic devices
that monitor and observe the condition of the machine
continuously.
The Engine and Pump controller will monitor the system through
the inputs & the controller will make adjustments through the
outputs.
The controller will adjust the speed of the engine & the flow of the
hydraulic pump due to the machine condition and selection of the
operator.
The controller is connected to the machine through two 54-pin
connectors.
Engine &Pump Controller
The monitor panel
- engine .
- main pump .
- travel motor .
MACHINE INFORMATION
MONITOR DISPLAY THE FOLLOWING STATUS INFORMATION:
ENGINE RPM.
DELIVERY PRESSURE OF THE MAIN PUMP (DRIVER SIDE) .
MAIN PUMP DELIVERY PRESSURE (IDLE SIDE).
POWER SHIFT PRESSURE FOR THE MAIN PUMP.
INPUT AND OUT PUT OF THE
CONTROLLER
INPUT / OUTPUT (BIDIRECTIONAL DATA LINK).
E.g. :-
- fuel level sender .
- temperature sender .
MONITOR OPERATION
PROCEDURE :-
1\ display main menu .
2\ select service options from CAPS screen .
3\ input password (0001) .
4\ select machine info option .
5\ choose the desired option .
WARNING OPERATION
2\ LEVEL 2
DISPLAYED ON THE LIQUID CRYSTAL DISPLAY AND THE
ACTION LAMP WILL ILLUMINATE .
3\ LEVEL 3
WARNING ON THE LIQUID CRYSTAL DISPLAY, ILLUMINATION
OF THE ACTION LAMP AND SOUNDIN OF THE ACTION ALARM
EXAMPLES OF WARNINGS