• The work W done on a system by an agent exerting a constant force
on the system is the product of the magnitude F of the force, the magnitude Δr of the displacement of the point of application of the force, and cos θ, where θ is the angle between the force and displacement vectors: DID HE DO ANY WORK? Which Path Requires the Most Energy? Work Done by a Spring
The force exerted by a spring on a
block varies with the block’s position x relative to the equilibrium position x = 0. – When x is positive (stretched spring), the spring force is directed to the left. – When x is zero (natural length of the spring), the spring force is zero. – When x is negative (compressed spring), the spring force is directed to the right. – Graph of Fs versus x for the block–spring system. The work done by the spring force as the block moves from -xmax to 0 is the area of the shaded triangle. – A block being pulled from xi = 0 to xf = xmax on a frictionless surface by a force Fapp. If the process is carried out very slowly, the applied force is equal in magnitude and opposite in direction to the spring force at all times. example • A common technique used to measure the force constant of a spring is demonstrated by the setup in figure. The spring is hung vertically, and an object of mass m is attached to its lower end. Under the action of the “load” mg, the spring stretches a distance d from its equilibrium position. – If a spring is stretched 2.0 cm by a suspended object having a mass of 0.55 kg, what is the force constant of the spring? – How much work is done by the spring as it stretches through this distance? – Suppose this measurement is made on an elevator with an upward vertical acceleration a. Will the unaware experimenter arrive at the same value of the spring constant? Kinetic Energy and the Work– Kinetic Energy Theorem
• An object undergoing a displacement Δr = Δx and a change in
velocity under the action of a constant net force ΣF. • In the case in which work is done on a system and the only change in the system is in its speed, the work done by the net force equals the change in kinetic energy of the system. The Nonisolated System— Conservation of Energy
• we can neither create nor destroy energy—energy is always
conserved. Thus, if the total amount of energy in a system changes, it can only be due to the fact that energy has crossed the boundary of the system by a transfer mechanism Situations Involving Kinetic Friction
• the result of a friction force is to transform kinetic energy into internal
energy, and the increase in internal energy is equal to the decrease in kinetic energy. Power
• The time rate of energy transfer dW
P dt
• The SI unit of power is joules per second ( J/s),
also called the watt (W) (after James Watt):
1 W =1 J/s = 1 kg.m2/s3
• A unit of power in the U.S. customary system is the horsepower (hp):
1 hp = 746 W example • An elevator car has a mass of 1 600 kg and is carrying passengers having a combined mass of 200 kg. A constant friction force of 4 000 N retards its motion upward, as shown in figure. – What power delivered by the motor is required to lift the elevator car at a constant speed of 3.00 m/s? – What power must the motor deliver at the instant the speed of the elevator is v if the motor is designed to provide the elevator car with an upward acceleration of 1.00 m/s2? • Consider a car of mass m that is accelerating up a hill, as shown in figure. An automotive engineer measures the magnitude of the total resistive force to be f = (218 + 0,70 v2) N where v is the speed in meters per second. Determine the power the engine must deliver to the wheels as a function of speed.