Escolar Documentos
Profissional Documentos
Cultura Documentos
presentation
Design and modeling of manually
hydraulic hand lift jib crane machine
Advisor
Mr.Ayele Hailu (Msc)
Examiner 1. Mr.Teferi (Msc)
2.Mr.Mintesnot (Msc)
18/10/2010 E.C Prepared by Zekirose & Yinager 1
Presentation Out line
• Introduction • Reason for selecting our topic
• Design analysis
• Objective of the project
• Working principle & animation
• Significance of the project
• Result and Discussion
• Scope of the project
• Conclusion
• Literature review
• Recommendation
• Importance of our design
18/10/2010 E.C Prepared by Zekirose & Yinager 2
Introduction
• Jib crane is suitable for loading and unloading heavy material from trucks
in the open yard and carry them inside the shop.
• The crane is equipped with lift cylinders and ram that provides the upward
thrust to the boom while lifting a heavy material.
• The lowering is effected by slacking a screw on the side bottom of the lift
cylinder.
• Also in other industries and welding shops, there are items and repairs
which need the employment of shop cranes.
• So this was the reason, which drives as to design and modeling of manually
hydraulic hand lift jib crane machine.
To Select standard parts such as hook, wheel and hydraulic bottle jack.
• Jib crane, a free standing or portable jib crane is an economical solution for
moving materials on working and lifting device under an overhead crane.
• this machine is mechanical in nature and does not pollute the environment.
• This machine mainly focusing on small and micro enterprise and garages
in Ethiopia.
Folding Workshop Crane machine (2018)”. This paper presents for self-
valuable workshop space. Heavy duty 3 position jib double acting pump
unit Swivel hook with safety catch Pressure relief valve to prevent
overloading Self standing on 4 wheels. And it has capacity of 1-2 tons only
• Our design have good flexibility with high load carrying capacities.
• We can use the hydraulic bottle jack for multiple purpose in this
design. For example it can be used for picking, carrying and moving any
loaded object up to this design maximum loading capacity (3 ton).
• It can reduce the risks of human beings from carrying high load object
such as disk prolapse.
18/10/2010 E.C Prepared by Zekirose & Yinager 22
Reason for Selecting Our Topic
• The UOG workshop have already finished the building and it’s waiting for
the availability of necessary machines for the workshop so that we selected
this design to solve the problems of picking, carrying and moving any
loaded objects from one place to other place in a safe way, since this service
are not given adequately by the product supply company that means it may
give the service of putting loaded objects to one place but not moving to the
place we needed.
• It can also reduce risk of polluting the environment from smoke, since it
operates hydraulically, it can’t release any smoke.
Design analysis
Cost analysis
• From the above required criteria table models are listed in its % weight for
each of Model are 1st (84.70 %) MODEL 5, 2nd (82.35% total) Model 1, 3rd
(72.94% total) Model 2. The structure of our model is effective in
distribution of load and minimizes stress comparing with the above table
(model 5 is the best one).
• We increase lifting capacity of hydraulic bottle jack since the ram of the
piston is perpendicular to the horizontal boom.
• We reduce the cost of the machine by using the exact capacity of jack.
Design specification
Maximum lifting height=2500mm
Gravity= g = 9.81mΤs2
• This crane is suitable for loading and unloading heavy material workshops
and it is busy else-where in rapid garages these are required for handling
engines and its parts.
• These cranes can also be used to carry liquids in containers and moving
parts from place to place by pumping the hydraulic handle part and
pushing the machine manually.
18/10/2010 E.C Prepared by Zekirose & Yinager 41
Recommendation
• Because of this machine becomes manual, simple to lift up loads by
pumping and it doesn’t ask qualification of employees, those garages and
small and micro enterprises should be use it to accelerate and to make
easily the work activity.
• Some components of the machine are made up of from different steel class
therefore the user should be prevent from rest in order to keep their life
time.
• Capacity of the machine is three tons therefore the users should not use
above its capacity.
• we recommend that IOT director should see this project and manufacture
this project for the benefit of good material handling and new plant layout
design for the workshop.