Escolar Documentos
Profissional Documentos
Cultura Documentos
45 businesses
$1.2B annual sales
Compressor Products
326 employees
5 Production factories, 2 Field Offices
1
2
PGE
LineBacker
VCS
VCFS (VCS Fire Safe)
VCSID
3
4
•Quad-Ring Type - utilizes a “quad-ring”
(rectangular O-ring) in combination with
a unique groove design
5
6
• Glass-Reinforced Epoxy Laminated to a 316
Stainless Steel Core For High Structural
Integrity
7
• Compressive Strength of NEMA Grade G-10
Composite Material is 65,000 psi (G-11 =
50,000 psi)
8
• Separating dissimilar metals in critical, high-
pressure applications to eliminate galvanic
corrosion
10
• Many times stronger than traditional flange
isolation gaskets
11
How the VCS Gasket Works
Raised Face Flange
Teflon Seal Jacket
P Flange Interface
R
E Epoxy Seal Retainer
S
S Dovetail-shaped Seal Grooves Stainless Steel Core
U
R
E Flange Interface
Spring Energizer
Under operating conditions, the internal pressure migrates through
the laminated structure of the epoxy seal retainer until the seals are
reached which are seated in the metal core of the dovetail-shaped grooves
12
How the Primary (PTFE) Seal Works
Dovetail-shaped groove
concentrates force into SS core
16
•Gasket
•Sleeves
•1 per stud
•Isolating washers
•2 per stud
•Back up washers
•2 per stud
17
Installation instruction
GPT Installation Instructions.pdf
Visual inspection
GPT Visual Installation Instructions.pdf
18
Hydrostatic testing to 9,900 psi
and held for 60 minutes
No leaks detected
19
Nitrogen testing to 6,600 psi and held for 30 minutes
20
21
• Composite Material is 65,000 psi (G-11 = 50,000 psi)
22
VCFS Components
23
How the VCFS Gasket Works
During Standard Operating Conditions
Raised Face Flange Under Compression
P
R
E
S
S
U
R
E
Under standard operating conditions, just like the VCS, the internal pressure
migrates through the laminated structure of the epoxy seal retainer until the seals
are reached which are seated in the metal core of the dovetail-shaped grooves 24
How the VCFS Gasket Works
During Fire
Raised Face Flange Under Compression
PTFE Seals Fail During Fire
P
R
E
S
S
U
R
E
Under fire conditions, the PTFE seals and the GRE fails, the internal pressure migrates
between the laminated structure of the epoxy seal retainer until the E-Rings are
reached.
How the E-Ring and Back-Up Seals Works
Carbon Steel Compression
Limiter To Maintain Bolt Load
P
R
E
S
S
Epoxy Seal Retainer
U
R
E
Stainless Steel Core
Flange Interface
Energized E-Ring
AL = SD * π
Where: AL = Allowable Leak
SD = Seal Diameter
28
29
30
31
32
33
34
35
•Improved Chemical
Resistance
•Increased electrical
isolation in
conductive medias
36
INSULATING SLEEVE
INSULATING WASHER
METAL WASHER
37
Hardened Coated
Steel (HCS)