Escolar Documentos
Profissional Documentos
Cultura Documentos
Nota: El peso de Vigas y Columnas está comprendido entre 250 y 350 Kg/m2
1er Piso
Masas Traslacional (Mt): (área x Carga)/9.81: 179.78x1215: 218189.70 /
9.81=22266.33Kg
Masa Rota: Mr: (Mt x (bx2+by2)) / 12 donde M: Momento
M: 22266.33Kg
Mr: 22266.33 x (20 (2)+ 13.50(2)) / 12 : 1080380.89 Kg-m
INCLUIR MASAS
2do Piso
Masas Traslacional (Mt): (área x Carga)/9.81: 137.50x1215: / 9.81= 17029.81Kg
Masa Rota: Mr: (Mt x (bx2+by2)) / 12 donde M: Momento
M: 17029.81Kg
Mr: 17029.81 x ( 14(2)+ 13.50(2)) / 12 : 536793.80 Kg-m
3er Piso
Masas Traslacional (Mt): (área x Carga)/9.81: 121.50x1215: / 9.81= 9474.77Kg
Masa Rota: Mr: (Mt x (bx2+by2)) / 12 donde M: Momento
M: 9474.77Kg
Mr: 9474.77 x ( 10(2)+ 13.50(2)) / 12 : 222854.49 Kg-m
Coordenadas:
Nivel Mtraslacional Mrotacional
1 22.266,33 1.080.380,89
2 17.029,81 536.793,80
3 9.474,77 222.854,49
el edificio
So
po
m
Q
ve
de
er
de
m
de
Chequear la cortante con norma sismo
• Nivel Sx Sy
1 26560.00 26661.00
2 36628.99 30379.91
3 31785.69 30374.13
Suma: 94973.77 93415.04
• Nivel 2:
• Tadx = 0.06 x By x F3 x = 0.06 x 13.50 x 36628,99 =
• Tady= 0.06 x Bx x F3 y = 0.06 x 14 x 36379,91=
• Nivel 1:
• Tadx = 0.06 x By x F3 x = 0.06 x 13.50 x 31785,69=
• Tady= 0.06 x Bx x F3 y = 0.06 x 20 x 30374,13=
• Torsiones x nivel x y
• Tad3 21513,6 15996,60
• Tad2 29669,48 30559,12
• Tad1 25746,41 36448,97
Se debe colocar las torsiones en todos los
pisos, Tx and Ty (en los centros masas)
Combinaciones de carga
• DERIVAX: sisx + 0.3 sisy + Tx + 0.3 Ty
• DERIVAY: sisy + 0.3 sisx + Ty 0.3 Tx
unnnnnnnnnnnnnnnnnnnnnn
Para los desplazamiento de las
Derivas
0.37= 1.95-1.58 1.95
1.58
0.739= 1.58-0.841
Se calcula lo siguiente:
Deriva: S x 0.8 (R) / H (Capítulo 10)
DNivel 1: 0.841 (0.8) (4.5) / 300 = 0.010D 0.00
5 6 4 4
Cargar la estructura
• Tomar en cuenta las áreas tributarias
muerta
muerta
Buscar perfil
• Se escoge el pórtico con mayor carga donde se obtiene que es:
• Cm: 3000
• Cv: 1250
• Carga Ultima: 1.2*3000 + 1.6*1250: 5600
• Momento: M: w*L2/8 = 5600 (36) /8 =25200 Kg-m
• Vigas:
• Sx: M(100) /0.66Fy = 2520000 /0.66* (2530) = 1107 (Vp420)
• Columna:
• r: 300/100 = 3 : k*L/ r
La carga entre el área tributaria = Esfuerzo = P / A
• 4250x25+3 = 188 * 318750 / 2530 = 126 cm2: área
Cálculo de masas
• Area: 166 m2
• Cm: 600
• Cv: 250
• Cs: 600+300 (peso y columnas) + 0.50*250 = 1025
• Ws: 1025*1600 : 170150
• Mx:my: m: 170150/9.81 = 17345.00
• Mz: 17345/12 * ((10)2 + (19)2) = 666337
• En techo:
• Cm :400
• Cv: 100
• Cs: 700: 400+300 porq la carga viva es cero
• Ws: 700*166: 116200
• M: 116200/9.81: 11845
• Mz: 11845/12 ((10)2 + (19)2) : 455045
• Vo: miu*Ad*W=
• Wt: 170150 + 116200: 456500
• Miu: (n+9/2n+12 )*1.4 = (3+9/2*3 + 12)*1.4 = 0.93
• Miu: 0.80 + 1/20 * (T/T* - 1):
• T*: PROBLEMA ANTERIOR: 0.70
• T: 1.6*Ta Ct: 0.08
• Ta: Ct * (hn)3/4 =0.08*(9)3/4
• T: 0.42*(1.6) = 0.67
• Miu: 0.80+ 1/20 * (0.67/0.70 – 1) = 0.80
Espectro
Vo*: 86098; miu: 0.93; W: 456500; Ad: 0.2028
0.2028
T+ T*
T: 0.67
Dir X: Vo*/Vo: 86098/63855 = 1.35
Dir Y: 86098/51409 = 1.67
Continuación
• Vo*/W >igual a (alfa*Ao/R) = 1* (0.35)/4.5 : 0.077
• 86098/456500: 0.19 >0.077 ok
• N-1:
• Tx: 22972(0.06)*10: 13783
• Ty: 26098(0.06)*19: 29752
continuación
• N-2:
• Tx: 33602*0.06*10: 20164
• Ty: 31205*0.06*19: 35574
• N-3
• Tx: 29608-0.06*10: 17765
• Ty: 28537*0.06*19: 32532
Según normas
• Deriva: 2.44 (0.8)(4.5)/300 = 0.029
• Es decir 29% por mil >18% es decir no
cumple con el máximo de la norma y se
debe redimensionar o simplemente
reforzar condiagonales.