The document provides specifications for laying ceramic tiles, including that tiles shall be of good quality, installed neatly according to the architect's requirements, and bonded using ABC tile adhesive as manufactured by Allgemeine-Bau-Chemie Phil., Inc. Joint filler shall match the tile design and sealant shall be used at intersections and wide installations to minimize cracks.
The document provides specifications for laying ceramic tiles, including that tiles shall be of good quality, installed neatly according to the architect's requirements, and bonded using ABC tile adhesive as manufactured by Allgemeine-Bau-Chemie Phil., Inc. Joint filler shall match the tile design and sealant shall be used at intersections and wide installations to minimize cracks.
The document provides specifications for laying ceramic tiles, including that tiles shall be of good quality, installed neatly according to the architect's requirements, and bonded using ABC tile adhesive as manufactured by Allgemeine-Bau-Chemie Phil., Inc. Joint filler shall match the tile design and sealant shall be used at intersections and wide installations to minimize cracks.
Shall be provided as required by the architect for a completely and neatly finished installation. Shall be ABC as manufactured by Allgemeine- Bau-Chemie Phil., Inc, or as specified otherwise (tile bonding agent) shall be as the dry-set mortar to install tiles on walls and floors employing the thin-set method conforming to ANSI A108.1b. Use ABC-Redifix with tile adhesive for combination of latex-dry set installation to conform to ANSI A108.1b. Shall be used as ceramic tile joint filler conforming to ANSI A118.6. color shall match the design of tiles. As recommended by adhesive manufacturer shall be provided as movement joint sealant for intersecting walls and floors and for areas where wide area installations are required to minimize cracks. Shall be clear, as recommended by adhesive manufacturer, and used on all tile grout installations for lasting color retention Shall be gray color for use on screeding and plastering. This shall conform to the requirements of PNS 07-type 1. Shall be the same quality as that used for masonry work. Shall conform to the requirements of ASTM specifications C35. Shall be portable.