This document describes a project to detect loads, alert of overloads, and transmit data using a load cell, ESP 8266, and buzzer. The system measures loads on trucks using a load cell. It displays the load, alerts if overloaded, and messages customers if the load is less than required to prevent looting. It was constructed with a load cell to detect loads, ESP 8266 for wireless transmission, and a buzzer for alerts. It benefits include prevention of loot, accurate weighing, reduction of time loss, and increased customer and owner awareness of loads.
This document describes a project to detect loads, alert of overloads, and transmit data using a load cell, ESP 8266, and buzzer. The system measures loads on trucks using a load cell. It displays the load, alerts if overloaded, and messages customers if the load is less than required to prevent looting. It was constructed with a load cell to detect loads, ESP 8266 for wireless transmission, and a buzzer for alerts. It benefits include prevention of loot, accurate weighing, reduction of time loss, and increased customer and owner awareness of loads.
This document describes a project to detect loads, alert of overloads, and transmit data using a load cell, ESP 8266, and buzzer. The system measures loads on trucks using a load cell. It displays the load, alerts if overloaded, and messages customers if the load is less than required to prevent looting. It was constructed with a load cell to detect loads, ESP 8266 for wireless transmission, and a buzzer for alerts. It benefits include prevention of loot, accurate weighing, reduction of time loss, and increased customer and owner awareness of loads.
COIMBATORE-13. DEPARTMENT OF MECHANICAL ENGINEERING
PROJECT TITLE:LOAD DETECTION,OVERLOAD ALERT
AND DATA TRANMSISSION USING LOAD CELL,ESP 8266 AND BUZZER. UNDER THE GUIDANCE OF Dr.M.S.AEZHISAI VALLAVI M.E., Ph.D BY 1612164-MOHAMMED ASHIK MEERAN.H 1612165-MOHAMMED SUHAIL.M 1612167-MUGUNTHAN.M 1612204-VIKNESH KUMAR.S PROBLEM STATEMENT Trucks and other heavy loading vehicles are used to carry the heavy loads from one area to another. The measurement of heavy loads is usually measured by weighbridge in heavy trucks. But the usage of such weighbridges paves the way for drivers to loot the loads. The loot in the loads leads the company to results in the loss of their respect and the customers to got fooled. To avoid this an idea has been implemented. OVERLOAD PREVENTION Our idea of methodology is to proceed the detection of load and display it on screen and to deliver the message the receiver whether there is a shortage in load to prevent the looting of products. This makes the drivers unavailable to loot the loads. WEIGHBRIDGE CONSTRUCTION CONSTRUCTION The construction procedure of our project is listed as follows: The body of the vehicle is fitted with load cell or strain gauge to detect the load. The measured load is converted and screened with the laptop screen To detect overloading, the system is also supported with programmed module which depicts the way of alerting. CONSTRUCTION The measured value is then checked with the given value. If it less than the customer’s required then the email is passed. These are the steps of construction of for our project. WORKING When the load is raised on the body of vehicle,the load cell or strain gauge attached to the body of the vehicle measures the load and depicts it in screen.
The depicted value is then messaged to
the consumer if it is less than the customer’s required. WORKING To prevent overloading,the body is covered with the programmed module This analyses throughout the given value and starts alerting if it is more than the allowed value. . COST AND ESTIMATION S.No PART NAME COST 1 LOAD CELL WEIGHT SENSOR WITH Hx711 1000 WEIGHING SENSORS AD MODULE 2 ESP 8266 1000 3 BATTERY 50 4 BUZZER 100 ADVANTAGES Prevention of loot
Accurate weighing
One time weighing
Reduction of time loss
Customers and owners are aware of the
load DISADVANTAGE
Cost is quite high.
Maintenance is required. APPLICATION
Used in all vehicles to identify overloading
To measure the load and aware the customer about the load THANK you