Escolar Documentos
Profissional Documentos
Cultura Documentos
AGENDA
KPI’s Graph
• For downlink resource allocation, if the RBs needed by a user is not equal to
the integral multiple of RBG, two strategies can be used:
– ROUNDDOWN If the data is more than 1RBG, spit the data into two parts(scheduling
twice), the first part is an integral multiple of RBG, the second part is less than 1RBG.
– ROUNDUP Add padding to the data to constitute an integral multiple of RBG(scheduling
once).
• Impact:
– ROUNDDOWN Twice scheduling are needed to transmit data, while no padding is added.
Disadvantage: More scheduling times(lower user throughput , more PDCCH resource).
– ROUNDUP Only once scheduling is needed to transmit data, while padding is added.
Advantage: Less scheduling times(higher user throughput, less PDCCH resource,).
• Parameter Description:
For services whose QoS class identifier (QCI) is not 1:
When this parameter is set to ROUND_DOWN: (1) If the number
of required resource block groups (RBGs) is less than 1, the
actual number of RBs are allocated to UEs at the current
transmission time interval (TTI);
If the number of required RBGs is greater than N but less than
N+1 (N is greater than or equal to 1), RBs of N RBGs are
allocated to UEs in the current TTI and the other required RBs
are allocated to UEs in the next TTI.
Setting this parameter to ROUND_DOWN ensures full utilization
of RBs, but increases scheduling times and decreases downlink
data rate. If this parameter is set to ROUND_UP and the number
of required RBGs is greater than N but less than N+1 (N is
greater than or equal to 0), RBs of N+1 RBGs are allocated to
UEs in the current TTI.
• Parameter Description:
Proposed
Parameter Name Pre Value Implementation state
Value
Round Round
RGB Resource Allocation strategy Done
Down UP